On the Effect of Chemical Composition on the Desorption of Superabsorbent Hydrogels in Contact with a Porous Cementitious Material

Microwave-Treated Physically Cross-Linked Sodium Alginate and Sodium Carboxymethyl Cellulose Blend Polymer Film for Open Incision Wound Healing in Diabetic Animals-A Novel Perspective for Skin Tissue Regeneration Application

This study aimed at developing the microwave-treated, physically cross-linked polymer blend film, optimizing the microwave treatment time, and testing for physicochemical attributes and wound healing potential in diabetic animals. Microwave-treated and untreated films were prepared by the solution casting method and characterized for various attributes required by a wound healing platform. The optimized formulation was tested for skin regeneration potential in the diabetes-induced open-incision animal model. The results indicated that the optimized polymer film formulation (MB-3) has significantly enhanced physicochemical properties such as high moisture adsorption (154.6 ± 4.23%), decreased the water vapor transmission rate (WVTR) value of (53.0 ± 2.8 g/m²/h) and water vapor permeability (WVP) value (1.74 ± 0.08 g mm/h/m²), delayed erosion (18.69 ± 4.74%), high water uptake, smooth and homogenous surface morphology, higher tensile strength (56.84 ± 1.19 MPa), and increased glass transition temperature and enthalpy (through polymer hydrophilic functional groups depicting efficient cross-linking). The in vivo data on day 16 of post-wounding indicated that the wound healing occurred faster with significantly increased percent re-epithelialization and enhanced collagen deposition with optimized MB-3 film application compared with the untreated group. The study concluded that the microwave-treated polymer blend films have sufficiently enhanced physical properties, making them an effective candidate for ameliorating the diabetic wound healing process and hastening skin tissue regeneration.

The Effect of Hydrogels with Different Chemical Compositions on the Behavior of Alkali-Activated Slag Pastes

The effect of in-house synthesized hydrogels with different chemical compositions on the properties of alkali-activated slag pastes was examined. It was found that the teabag test and modified teabag test as a direct method and the flow test as an indirect method showed a similar trend in hydrogel absorption; however, the absorption values differ noticeably between the direct and indirect methods. The alkali-activated slag pastes with hydrogels demonstrated a significant reduction in autogenous shrinkage compared to the pastes without hydrogels. The creation of macrovoids by the hydrogels and change in pore structure resulted in a decrease in compressive strength and electrical resistivity of the pastes with hydrogels. The absorption and desorption of hydrogels in the pastes were tracked using X-ray microcomputed tomography (micro-CT), and it was shown that the onset of hydrogel desorption approximately coincided with the final setting time of the pastes.

Effects of Secondary Porosity on Microstructure and Mechanical Properties of SAP-Containing Lime-Based Plasters

Despite the many benefits associated with the utilization of superabsorbent polymers (SAPs), several drawbacks have been reported. In particular, the effect of SAPs on microstructure, together with its consequences for mechanical properties, is not fully understood yet for some composite materials. This study analyzes the role of SAPs in the formation of the microstructure of lime composites, taking into account their chemical composition. The obtained experimental results show that the particle size and cross-linking density of used SAPs are crucial parameters affecting both the microstructure and mechanical performance of the analyzed composites. Coarser SAPs with low cross-linking density in the dosage of 0.5 and 1 wt.% are found as the most suitable solution, leading even to a slight improvement of mechanical parameters. The secondary porosity formed by swelled hydrogels is identified as a very significant factor since hydrogel-filled voids do not contribute to the strength parameters. The formation of the affected zone around SAP cores depends on the chemical composition of SAPs considerably as the higher cross-linking density influences the desorption rate. Based on achieved results, utilization of SAPs in building materials should be studied at a more detailed level with particular importance on the definition of SAP-related voids and affected zone around SAP particles.

Microwave Enabled Physically Cross Linked Sodium Alginate and Pectin Film and Their Application in Combination with Modified Chitosan-Curcumin Nanoparticles. A Novel Strategy for 2nd Degree Burns Wound Healing in Animals

This study reports microwave assisted physically cross-linked sodium alginate and pectin film and their testing in combination with modified chitosan-curcumin nanoparticles for skin tissue regeneration following 2nd degree burn wound. Film was formulated by solution casting method and physically cross-linked using microwave irradiation at frequency of 2450 MHz, power 750 Watt for different time intervals for optimization. The optimized formulation was analyzed for various physiochemical attributes. Afterwards, the optimized film and optimized modified chitosan-curcumin nanoparticles were tested in combination for skin regeneration potential following burn wound in vivo and skin samples extracted and tested for different attributes. The results indicated that the optimized film formulation (5 min microwave treatment) physicochemical attributes significantly enhanced addressing the properties required of a wound healing platform. The vibrational analysis indicated that the optimized film experienced significant rigidification of hydrophilic domains while the hydrophobic domains underwent significant fluidization which also resulted in significant increase in the transition temperatures and system enthalpies of both polymer moieties with microwave treatment. The combined film and nanoparticles application significantly increased protein content in the wounds which were evident from higher absorbance ratios of amide-I and amide-II (2.15 ± 0.001), significantly higher melting transition temperature and enthalpy (∆T = 167.2 ± 15.4 °C, ∆H = 510.7 ± 20.1 J/g) and higher tensile strength (14.65 ± 0.8 MPa) with significantly enhanced percent re-epithelization (99.9934 ± 2.56) in comparison to other treatments. The combined application of film and nanoparticles may prove to be a new novel treatment strategy for 2nd degree burn wound healing.

Chloride Diffusion in Concrete Modified with Polyacrylic Superabsorbent Polymer (SAP) Hydrogel-The Influence of the Water-to-Cement Ratio and SAP-Entrained Water

This paper examines the influence of polyacrylic superabsorbent polymers (SAP) on the properties concerning chloride diffusion in cementitious materials. The conducted study investigated the influence of SAP on chloride diffusion in concretes of the initial w/c = 0.4 (for which the changes in compressive strength due to the SAP presence were negligible). The impact on the diffusivity of concrete of several variables was analyzed: the material characteristics of SAP, additional water added to the concrete to make up for the amount of water stored in the SAP structure, and the method of SAP dosing to the mix (either in a non-saturated form or in a hydrogel form). We found that, in the case of modifying concrete with polyacrylic SAP of a median particle size in dry conditions of 330 µm and without additional water, the coefficient of chloride ion diffusion was reduced to 65% of the reference value. The negative influence (increase) of increasing w/c_tot by the amount of water initially entrained by SAP on the chloride diffusivity of concrete was identified. The conducted study indicates the premise of the mechanism of the water release from SAP in cementitious composites.

Environmentally friendly superabsorbent fibers based on electrospun cellulose nanofibers extracted from wheat straw

Superabsorbent polymers currently used in health and agricultural sectors are based on petroleum-based materials which led to serious concerns in the society. Here, superabsorbent fibers (SAFs) based on electrospun cellulose nanofibers (ECNFs) were prepared. Firstly, cellulose was removed from wheat straw, pre-treated with the TEMPO-mediated oxidation and subsequently dissolved into Trifluoroacetic acid for production of ECNFs through the electrospinning approach. The maximum swelling ratios of 225 g/g and 208 g/g in distilled water and 0.9 wt% NaCl solution were measured for ESAFs composed of oxidized ECNFs containing 15 % poly (sodium acrylate), respectively. The ESAFs were characterized using Fourier transform infrared spectroscopy and field emission scanning electron microscopy analysis. The FESEM showed that ESAFs formed high strength three-dimensional architecture networks. Also, the results showed that the ionic sensitivity of this ECNFs were low. The prepared ESAFs are attractive renewable alternatives for different applications, contributing to a reduction of plastic microspheres.

The Behavior of Superabsorbent Polymers (SAPs) in Cement Mixtures with Glass Powders as Supplementary Cementitious Materials

The absorption and desorption of superabsorbent polymers (SAPs) in cement mixtures containing two different glass powders as supplementary cementitious materials are examined in this paper. Two SAPs with different chemical compositions were synthesized in-house and used in the experiments. SAP absorption was investigated directly through the mass change of SAPs in cement slurries, as well as indirectly using the flow test. Scanning electron microscopy was used to monitor the desorption of SAPs using samples prepared with freeze-drying. Hydration and setting time were evaluated to explain the desorption behavior of SAPs. SAP absorption generally increased in pastes with glass powders. The desorption rate of SAPs in different pastes was shown to correlate with the onset of solid skeleton development in the pastes. The addition of SAPs reduced autogenous shrinkage in neat cement paste more than in pastes with glass powders.