In Situ Viscoelasticity Behavior of Cellulose-Chitin Composite Hydrogels during Ultrasound Irradiation

In situ sono-rheometric assessment of procaine-loaded calcium pectinate hydrogel for enhanced drug releasing under ultrasound stimulation

Ultrasound (US) triggered alterations in the viscoelastic behavior of the procaine-loaded ionically gelatinized pectin hydrogel matrix, and drug release was observed using a sono-device rheometer. The gel softened immediately upon activation of the ultrasound operated at 43 kHz and remained in a softened state throughout the irradiation. Upon cessation of ultrasound, the gel promptly reverted to its original hardness. This cycle of softening was consistently observed in ionically crosslinked pectin hydrogels, resulting in the promotion of procaine release, particularly with higher US power and lower calcium concentration. As the amount of loaded procaine increased, the gel weakened due to ion exchange with the calcium crosslinker and procaine. The most substantial release efficiency, reaching 82 % with a concentration of 32 μg/ml, was achieved when the hydrogels contained 0.03 % procaine within the gelatinized hydrogel medicine at a calcium concentration of 0.9 M, representing a six-fold increase compared to that without US. Notably, US exposure affected the 3D porous structure and degradation rate, leading to hydrogel collapse and facilitating medicine release. Additionally, the procaine-loaded pectin hydrogels with 0.9 M calcium exhibited improved fibroblast cell viability, indicating non-toxicity compared to those hydrogels prepared at a higher Ca2+ concentration of 2.4 M.

Phase Inversion Gelation Process and Additive Effects on Hydrogel Film Properties of Cotton Cellulose

During the preparation of cotton cellulose hydrogels using the phase inversion gelation method of N,N-dimethylacetamide/LiCl solution under ethanol vapor, acetone (AC), methyl ethyl ketone (MEK), or diethyl ketone (DEK) were added as additives, and their gelation state and the properties of the resulting hydrogels were evaluated. Adding the ketones to the cellulose solution caused an increase in the gelation time, but the solution viscosity decreased, indicating that the cellulose tended to aggregate in the solution. Among the hydrogels prepared by adding ketones, the water content was as high as 2050%, especially for AC and MEK. In these hydrogels, cellulose formed an agglomerated fibrous network of a few micron widths, forming a tuft-like entrapment space of about 10 to 100 μm size. The structure surrounded water and held it in the hydrogels. The FTIR results showed that the water, which formed hydrogen bonds, was retained within the hydrogel network. This structural configuration was determined to be conducive to maintaining the gel state against external deformation forces, especially in the case of the addition of MEK.

Hydrogels based on seafood chitin: From extraction to the development

Chitin is extensively applied in vast applications due to its excellent biological properties, such as biodegradable and non-toxic. About 50 % of waste generated during seafood processing is chitin. Conventionally, chitin is extracted via chemical method. However, it has many shortcomings. Many novel extraction methods have emerged, including enzymatic hydrolysis, microbial fermentation, ultrasonic or microwave-assisted, ionic liquids, and deep eutectic solvents. Chitin and its derivatives-based hydrogels have attracted much attention due to their excellent properties. Nevertheless, they all have many limitations. Therefore, the preparation and application of chitin and its derivatives-based hydrogels are still facing great challenges. This review focuses on the challenges and prospects for sustainable chitin extraction from seafood waste and the preparation and application of chitin and its derivatives-based hydrogels. First section summarizes the mechanism and application of several methods of extracting chitin. The different extraction methods were evaluated from the aspects of yield, degree of acetylation, and protein and mineral residuals. The shortcomings of the extraction methods are also discussed. Next section summarizes the preparation and application of chitin and its derivatives-based hydrogels. Overall, we hope this mini-review can provide a practical reference for selecting chitin extraction methods from seafood and applying chitin and its derivatives-based hydrogels.

Viscoelastic Analysis of Pectin Hydrogels Regenerated from Citrus Pomelo Waste by Gelling Effects of Calcium Ion Crosslinking at Different pHs

Pectin was extracted from citrus pomelo waste, and the effects of calcium ions (Ca²⁺) on the gelation and hydrogels properties were investigated over a pH range of 3.2-8 by using viscoelastic analysis. The gelatinization of Ca²⁺-pectin was examined at concentrations of 0.9, 1.8, 2.4, and 3.6 M of Ca²⁺ in aqueous pectin solutions of 1%, 2%, 3%, and 4%. The gel transition of Ca²⁺-pectin solution to hydrogels was determined by measuring the storage modulus (G') and loss modulus (G") under mechanical strain from 0.01 to 100%. In a hydrogel of 3% pectin at Ca²⁺ = 2.4 M, as pH increased to 7, the G' at 0.01 strain % was 3 × 10⁴ Pa, and 3 × 10³ Pa at pH 5, indicating that the crosslinking weakened at acidic pH. Due to the crosslinking between the calcium ions and the ionized carboxylic acid groups of pectin, the resulting hydrogel became stiff. When the mechanical strain % was in the range of 0.01-1%, G' was unchanged and G" was an order of magnitude smaller than G', indicating that the mechanical stress was relieved by the gel. In the range of 1-100%, the gel deformation progressed and both the moduli values were dropped. Collapse from the gel state to the solution state occurred at 1-10 strain %, but the softer hydrogels with G' of 10³ Pa had a larger strain % than the stiffer hydrogels with G' of 10⁴ Pa.

Ultrasound Viscoelastic Properties of Biomass Polysaccharide Hydrogels as Evaluated by Rheometer Equipped with Sono-Device

A viscoelastic rheometer was equipped with a sono-device and a water bath to enable measurement of storage moduli G′ and loss moduli G″ of biomass polysaccharide hydrogels such as Kanten agarose, κ-carrageenan, and konjac glucomannan under ultrasound (US) exposure. The action of low power of 43 kHz US on their hydrogels significantly decreased G′ of Kanten agarose and carrageenan after a few seconds of US exposure 0.1% strain. When US with 20 W output power was exposed under mechanical strain at 0.1%, lower values were obtained cyclically for 3 min US intervals. The values then reverted to the original moduli values when US was stopped in cases of Kanten agarose and carrageenan hydrogels. As G″ values were increased during US operation, the anhydro-L-galactose segments in their hydrogels were unable to relax the external US forces within the gel sufficiently, thereby leading to gel structure collapse at a higher strain percentage. These results suggest that US exposure induced deformational change in the hydrogel structure formed by hydrogen-bonded cross-links. However, US deformation was less in the case of deacetylated cross-linkage in konjac glucomannan hydrogel.