Use of Betaine-Based Gel and Its Potential Application in Enhanced Oil Recovery

A Supramolecular Reinforced Gel Fracturing Fluid with Low Permeability Damage Applied in Deep Reservoir Hydraulic Fracturing

Gel fracturing fluid is the optimum fracturing fluid for proppant suspension, which is commonly applied in deep reservoir hydraulic fracturing. The content of polymers and crosslinkers in gel fracturing fluid is usually high to meet the needs of high-temperature resistance, leading to high costs and reservoir permeability damage caused by incomplete gel-breaking. In this paper, a supramolecular reinforced gel (SRG) fracturing fluid was constructed by strengthening the supramolecular force between polymers. Compared with single network gel (SNG) fracturing fluid, SRG fracturing fluid could possess high elasticity modulus (G' = 12.20 Pa) at lower polymer (0.4 wt%) and crosslinker (0.1 wt%) concentrations. The final viscosity of SRG fracturing fluid was 72.35 mPa·s, meeting the temperature resistance requirement of gel fracturing fluid at 200 °C. The gel-breaking time could be extended to 90-120 min using an encapsulated gel breaker. Gel particles are formed after the gel fracturing fluid is broken. The median particle size of gel particles in the SRG-breaking solution was 126 nm, which was much smaller than that in the industrial gel (IDG) breaking fluid (587 nm). The damage of the SRG-breaking solution to the core permeability was much less than the IDG-breaking solution. The permeability damage of cores caused by the SRG-breaking solutions was only about half that of IDG-breaking solutions at 1 mD.

Impact of Vegetable Oil Type on the Rheological and Tribological Behavior of Montmorillonite-Based Oleogels

We formulated and characterized oleogels based on montmorillonite clay and vegetable oils that could serve as eco-friendly semi-solid lubricants. In particular, we studied the influence of the physical-chemical properties of olive, castor, soybean, linseed, and sunflower oils on the rheological, chemical, thermal, and tribological properties of the semi-solid lubricants. We prepared the oleogels via the highly intensive mixing of vegetable oils with clay at a concentration of 30 wt.%. The oleogels exhibited shear-thinning, thixotropy, structural recovery, and gel-like behavior commonly related to that of a three-dimensional network. The results were corroborated via XRD measurements showing the presence of intercalated nanoclay structures well-dispersed in the vegetable oil. Empirical correlations between the content of saturated (SFAs), unsaturated (UFAs), mono-unsaturated (MUFAs) and poly-unsaturated (PUFAs) fatty acids and the plateau modulus of the aerogels were found. From these experimental results, we can conclude that the fatty acid profile of the vegetable oils exerts an important influence on the rheological and tribological properties of resulting clay and vegetable oil oleogels.

Simulated Investigation in Wormhole Expansion Law of Gelling Acid Etching and Its Influencing Factors in Deep Carbonate Reservoirs

Acidizing with gelling acid is the key technology in developing a carbonate reservoir successfully. It is difficult for the laboratory to carry out the radial displacement experiment with a large rock core. It is necessary to establish the gelling acid wormhole expansion model under the radial conditions, simulate the gelling acid wormhole expansion law under the radial conditions, optimize the construction parameters, and provide the basis for the optimal design of carbonate reservoir matrix acidizing. The research objective is to simulate the gelling acid etching wormhole expansion in a deep carbonate reservoir and make clear its influencing factors, which are helpful for reservoir stimulation. The mathematical model of gelling acid wormhole expansion was established, considering the influence of pore microscopic characteristics on acid flow and acid rock reaction. The simulation results indicated that viscosity, surface reaction rate, and hydrogen ion diffusion coefficient have different effects on gelling acid etching wormhole. The spatial distribution of pores determines the trend of gelling acid solution and thus the shape of the armhole. Perforation completion has a significant impact on the expansion of gelling acid etching wormhole. The wormhole extends forward along the perforation hole, and perforation increases the length of the wormhole. This wormhole expansion law is very suitable in situations where a deep carbonate reservoir is needed for gelling acid fracturing.