Fabrication and Applications of Ceramic-Based Nanofiber Materials Service in High-Temperature Harsh Conditions—A Review

Continuous Rapid Fabrication of Ceramic Fiber Sponge Aerogels with High Thermomechanical Properties via a Green and Low-Cost Electrospinning Technique

Ceramic aerogel is an appealing fireproof and heat-insulation material, but synchronously improving its mechanical and thermal properties is a challenge. Moreover, the expensive discontinuous processing techniques inhibit the large-scale fabrication of ceramic aerogels. Here, we propose a water-based electrospinning method, based on the hydrolysis and condensation reactions of ceramic precursor salts themselves, for the continuous and rapid (0.025 m3/min) fabrication of ceramic fiber sponge aerogels with dual micronano fiber networks, which show synchronous enhanced fireproof, thermal insulation, and resilience performance. The elastic ceramic micro/nano fiber sponge aerogels contain robust silica-based microfibers as a firm skeleton and alumina-based nanofibers as elastic thermal insulation filler. The sponges have a high porosity of >99.8%, a low mass density (6.21 mg/cm3), a small thermal conductivity (0.022 W/m·K), and a large compression strength (21.15 kPa at 80% strain). The ceramic fiber sponges can effectively prevent the propagation of thermal runaway when a lithium battery experiences catastrophic thermal shock (>1000 °C) in the power battery packs. The proposed strategy is feasible for low-cost and rapid synthesizing ceramic aerogels toward effective battery thermal management.

Geopolymer concrete containing nanomaterials-a step toward sustainable construction

Geopolymer concrete (GPC) utilizes industrial wastes such as fly ash, bottom, ash, and slag instead of conventional Portland cement as the primary binder, and thus promote a sustainable solution for bulk concrete works. Nanomaterials (NMs) have often been linked with developing these sustainable high-strength mixes. Furthermore, NMs have been proven to imbibe enhanced physio-mechanical properties, often eliminating the need for thermal curing. This not only reduces total energy demand for concrete production but also offers enhanced durability due to denser inter-particle packing of the mix. This review meticulously summarizes the performance of GPCs dosed with different types of NMs including nano-silica (NS), nano-alumina (NA), nano-titanium di oxide (NT), nano-clay (NC), nano-graphene oxide (NG), and carbon nanotubes (CNT). The reported findings of previous studies were carefully studied and compiled in a systematic manner in terms of physio-mechanical, durability, and microstructural properties. It was observed that addition of NM, in general, leads to a slight reduction in the mix's workability; however, the same can be counteracted by use of suitable superplasticizers. Furthermore, inclusion of NMs in GPC offers the distinct advantage of high density and impermeability, resulting in enhanced mechanical and durability characteristics. Two distinct multi-criteria decision making (MCDM) techniques were employed in this study to statistically analyze the most preferred NM for GPC. It was found that addition of NS (2%) yields the most desirable outcomes. Finally, limitations and challenges associated with production of NM dosed GPC along with scopes for future works are presented toward the end of this review.

Enhancing periodontal defences with nanofiber treatment: recent advances and future prospects

The term periodontal disease is used to define diseases characterised by inflammation and regeneration of the gums, cementum, supporting bone, and periodontal ligament. The conventional treatment involves the combination of scaling, root planning, and surgical approaches which are invasive and can pose certain challenges. Intrapocket administration of nanofibers can be used for overcoming challenges which can help in speeding up the wound repair process and can also be used to promote osteogenesis. To help make drug delivery more effective, nanofibers are an interesting solution. Nanofibers are nanosized 3D structures that can fill the pockets and have excellent mucoadhesion which prolongs their retention time on the target site. Moreover, their structure mimics the natural extracellular matrix which enables nanomaterials to sense local biological conditions and start cellular-level reprogramming to produce the necessary therapeutic efficacy. In this review, the significance of intrapocket administration of nanofibers using recent research for the management of periodontitis has been discussed in detail. Furthermore, we have discussed polymers used for the preparation of nanofibers, nanofiber production methods, and the patents associated with these developments. This comprehensive compilation of data serves as a valuable resource, consolidating recent developments in nanofiber applications for periodontitis management into one accessible platform.

Advancements in Thermal Insulation through Ceramic Micro-Nanofiber Materials

Ceramic fibers have the advantages of high temperature resistance, light weight, favorable chemical stability and superior mechanical vibration resistance, which make them widely used in aerospace, energy, metallurgy, construction, personal protection and other thermal protection fields. Further refinement of the diameter of conventional ceramic fibers to microns or nanometers could further improve their thermal insulation performance and realize the transition from brittleness to flexibility. Processing traditional two-dimensional (2D) ceramic fiber membranes into three-dimensional (3D) ceramic fiber aerogels could further increase porosity, reduce bulk density, and reduce solid heat conduction, thereby improving thermal insulation performance and expanding application areas. Here, a comprehensive review of the newly emerging 2D ceramic micro-nanofiber membranes and 3D ceramic micro-nanofiber aerogels is demonstrated, starting from the presentation of the thermal insulation mechanism of ceramic fibers, followed by the summary of 2D ceramic micro-nanofiber membranes according to different types, and then the generalization of the construction strategies for 3D ceramic micro-nanofiber aerogels. Finally, the current challenges, possible solutions, and future prospects of ceramic micro-nanofiber materials are comprehensively discussed. We anticipate that this review could provide some valuable insights for the future development of ceramic micro-nanofiber materials for high temperature thermal insulation.