From the Laboratory to The Vineyard-Evolution of The Measurement of Grape Composition using NIR Spectroscopy towards High-Throughput Analysis

Grape Maturity Estimation Using Time-of-Flight and LiDAR Depth Cameras

This article investigates the potential for using low-cost depth cameras to estimate the maturity of green table grapes after they have been harvested. Time-of-flight (Kinect Azure) and LiDAR (Intel L515) depth cameras were used to capture depth scans of green table grape berries over time. The depth scans of the grapes are distorted due to the diffused scattering of the light emitted from the cameras within the berries. This causes a distance bias where a grape berry appears to be further from the camera than it is. As the grape aged, the shape of the peak corresponding to the grape became increasingly flattened in shape, resulting in an increased distance bias over time. The distance bias variation with time was able to be fitted with an R2 value of 0.969 for the Kinect Azure and an average of 0.904 for the Intel L515. This work shows that there is potential to use time-of-flight and LIDAR cameras for estimating grape maturity postharvest in a non-contact and nondestructive manner.

The beneficial effect of leaf removal during fruit set on physiological, biochemical, and qualitative indices and volatile organic compound profile of the Cypriot reference cultivar 'Xynisteri'

BACKGROUND

'Xynisteri' is the reference Cypriot white cultivar that, despite its significant societal and economic impact, is poorly characterized regarding its qualitative properties, while scarce information exists regarding its aroma profile. In the current study, the effect of leaf removal during fruit set (BBCH 71) on 6-year cordon-trained, spur-pruned grapevines was assessed and an array of physiological, biochemical, and qualitative indices were monitored during successive developmental stages (BBCH 75, BBCH 85, BBCH 87, and BBCH 89). Grapes were additionally monitored for the volatile organic compounds (VOCs) profile during the advanced on-vine developmental stages (BBCH 85-BBCH 89) with the employment of gas chromatography-mass spectrometry (GC-MS), Fourier-transform near infrared (FT-NIR) spectra and electronic nose (E-nose) techniques.

RESULTS

Grape berries from the vines subjected to leaf removal were characterized by higher solid soluble sugars (SSC), titratable acidity (TA), tartaric acid, and ammonium nitrogen contents, while this was not the case for assimilable amino nitrogen (primary amino nitrogen). A total of 75 compounds were identified and quantified, including aliphatic alcohols, benzenic compounds, phenols, vanillins, monoterpenes, and C₁₃ -norisoprenoids. Leaf removal led to enhanced amounts of glycosylated aroma compounds, mainly monoterpenes, and C₁₃ -norisoprenoids. Chemometric analysis, used through FT-NIR and E-nose, showed that the aromatic patterns detected were well associated to the grape ripening trend and differences between leaf removal-treated and control grapes were detectable during fully ripe stage.

CONCLUSION

Leaf removal at fruit set resulted in an overall induction of secondary metabolism, with special reference to glycosylated aroma compounds, namely monoterpenes and C₁₃ -norisoprenoids. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Estimation of Sugar Content in Wine Grapes via In Situ VNIR-SWIR Point Spectroscopy Using Explainable Artificial Intelligence Techniques

Spectroscopy is a widely used technique that can contribute to food quality assessment in a simple and inexpensive way. Especially in grape production, the visible and near infrared (VNIR) and the short-wave infrared (SWIR) regions are of great interest, and they may be utilized for both fruit monitoring and quality control at all stages of maturity. The aim of this work was the quantitative estimation of the wine grape ripeness, for four different grape varieties, by using a highly accurate contact probe spectrometer that covers the entire VNIR-SWIR spectrum (350-2500 nm). The four varieties under examination were Chardonnay, Malagouzia, Sauvignon-Blanc, and Syrah and all the samples were collected over the 2020 and 2021 harvest and pre-harvest phenological stages (corresponding to stages 81 through 89 of the BBCH scale) from the vineyard of Ktima Gerovassiliou located in Northern Greece. All measurements were performed in situ and a refractometer was used to measure the total soluble solids content (°Brix) of the grapes, providing the ground truth data. After the development of the grape spectra library, four different machine learning algorithms, namely Partial Least Squares regression (PLS), Random Forest regression, Support Vector Regression (SVR), and Convolutional Neural Networks (CNN), coupled with several pre-treatment methods were applied for the prediction of the °Brix content from the VNIR-SWIR hyperspectral data. The performance of the different models was evaluated using a cross-validation strategy with three metrics, namely the coefficient of the determination (R2), the root mean square error (RMSE), and the ratio of performance to interquartile distance (RPIQ). High accuracy was achieved for Malagouzia, Sauvignon-Blanc, and Syrah from the best models developed using the CNN learning algorithm (R2>0.8, RPIQ≥4), while a good fit was attained for the Chardonnay variety from SVR (R2=0.63, RMSE=2.10, RPIQ=2.24), proving that by using a portable spectrometer the in situ estimation of the wine grape maturity could be provided. The proposed methodology could be a valuable tool for wine producers making real-time decisions on harvest time and with a non-destructive way.

Impact of climate change on grape berry ripening: An assessment of adaptation strategies for the Australian vineyard

Compressed vintages, high alcohol and low wine acidity are but a few repercussions of climate change effects on Australian viticulture. While warm and cool growing regions may have different practical concerns related to climate change, they both experience altered berry and must composition and potentially reduced desirable wine characteristics and market value. Storms, drought and uncertain water supplies combined with excessive heat not only depress vine productivity through altered physiology but can have direct consequences on the fruit. Sunburn, shrivelling and altered sugar-flavour-aroma balance are becoming more prevalent while bushfires can result in smoke taint. Moreover, distorted pest and disease cycles and changes in pathogen geographical distribution have altered biotic stress dynamics that require novel management strategies. A multipronged approach to address these challenges may include alternative cultivars and rootstocks or changing geographic location. In addition, modifying and incorporating novel irrigation regimes, vine architecture and canopy manipulation, vineyard floor management, soil amendments and foliar products such as antitranspirants and other film-forming barriers are potential levers that can be used to manage the effects of climate change. The adoption of technology into the vineyard including weather, plant and soil sensors are giving viticulturists extra tools to make quick decisions, while satellite and airborne remote sensing allow the adoption of precision farming. A coherent and comprehensive approach to climate risk management, with consideration of the environment, ensures that optimum production and exceptional fruit quality is maintained. We review the preliminary findings and feasibility of these new strategies in the Australian context.

Fourier transform infrared spectroscopy in monitoring the wine production

The complexity of the wine matrix makes monitoring of the winemaking process from the grapes to the final product crucial for the wine industry. In this context, analytical methodologies that can combine good accuracy, robustness, high sample throughput, “green character”, and by preference real-time analysis, are on-demand to create high-quality vitivinicultural products. In the last years, Fourier-transform Infrared Spectroscopy (FTIR) combined with chemometric analysis has been evaluated in several studies as an effective analytical tool for the wine sector. Some applications of FTIR spectroscopy have been already accepted by the wine industry, mainly for the prediction of basic oenological parameters, using portable and non-portable instruments, but still many others are waiting to be thoroughly developed. This literature review aims to provide a critical synopsis of the most important studies assessing grape and wine quality and authenticity, and to identify possible gaps for further research, meeting the needs of the modern wine industry and the expectations of most demanding consumers. The FTIR studies were grouped according to the main sampling material used - 1) leaves, stems, and berries; 2) grape must and wine applications - along with a summary of the basic limitations and future perspectives of this analytical technique.

Application of Elicitors in Grapevine Defense: Impact on Volatile Compounds

Elicitors as alternatives to agrochemicals are widely used as a sustainable farming practice. The use of elicitors in viticulture to control disease and improve phenolic compounds is widely recognized in this field. Concurrently, they also affect other secondary metabolites, such as aroma compounds. Grape and wine aroma compounds are an important quality factor that reflects nutritional information and influences consumer preference. However, the effects of elicitors on aroma compounds are diverse, as different grape varieties respond differently to treatments. Among the numerous commercialized elicitors, some have proven very effective in improving the quality of grapes and the resulting wines. This review summarizes some of the elicitors commonly used in grapevines for protection against biotic and abiotic stresses and their impact on the quality of volatile compounds. The work is intended to serve as a reference for growers for the sustainable development of high-quality grapes.

Application of a Cost-Effective Visible/Near Infrared Optical Prototype for the Measurement of Qualitative Parameters of Chardonnay Grapes

In this paper, a cost-effective visible/near infrared optical prototype was tested for grape maturity monitoring. The device was used to quantify the qualitative parameters of Chardonnay grapes, based on the combination of spectroscopic data and the creation of predictive models. The optical acquisitions were performed directly in the field through the use of 12 wavelengths in the vis/NIR range, i.e., 450, 500, 550, 570, 600, 610, 650, 680, 730, 760, 810 and 860 nanometers. The prediction of the qualitative parameters was carried out through a multivariate model, partial least square (PLS) regression technique and built knowing the real values of the parameters, i.e., total soluble solids (TSS), titratable acidity (TA) and pH measured through the reference laboratory analyses. Sampling included two harvest years. The most efficient model was the one for TSS evaluation that gave a R2 = 0.87 (independent test set validation). The results demonstrated that the optical device is able to provide useful information about the ripening parameters of Chardonnay grapes directly in the field in order to predict its correct maturation stage and, therefore, support operators in rapid and objective decision making. Overall, the use of the prototype promotes a sustainable approach and viticulture 4.0.

Novel Application of NIR Spectroscopy for Non-Destructive Determination of 'Maraština' Wine Parameters

This study investigates the colour and standard chemical composition of must and wines produced from the grapes from Vitis vinifera L., 'Maraština', harvested from 10 vineyards located in two different viticultural subregions of the Adriatic region of Croatia: Northern Dalmatia and Central and Southern Dalmatia. The aim was to explore the use of NIR spectroscopy combined with chemometrics to determine the characteristics of Maraština wines and to develop calibration models relating NIR spectra and physicochemical/colour data. Differences in the colour parameters (L*, a*, hue) of wines related to the subregions were confirmed. Colour difference (ΔE) of must vs. wine significantly differed for the samples from the Maraština grapes grown in both subregions. Principal component regression was used to construct the calibration models based on NIR spectra and standard physicochemical and colour data showing high prediction ability of the 13 studied parameters of must and/or wine (average R² of 0.98 and RPD value of 6.8). Principal component analysis revealed qualitative differences of must and wines produced from the same grape variety but grown in different subregions.

Insect Protein Content Analysis in Handcrafted Fitness Bars by NIR Spectroscopy. Gaussian Process Regression and Data Fusion for Performance Enhancement of Miniaturized Cost-Effective Consumer-Grade Sensors

Future food supply will become increasingly dependent on edible material extracted from insects. The growing popularity of artisanal food products enhanced by insect proteins creates particular needs for establishing effective methods for quality control. This study focuses on developing rapid and efficient on-site quantitative analysis of protein content in handcrafted insect bars by miniaturized near-infrared (NIR) spectrometers. Benchtop (Büchi NIRFlex N-500) and three miniaturized (MicroNIR 1700 ES, Tellspec Enterprise Sensor and SCiO Sensor) in hyphenation to partial least squares regression (PLSR) and Gaussian process regression (GPR) calibration methods and data fusion concept were evaluated via test-set validation in performance of protein content analysis. These NIR spectrometers markedly differ by technical principles, operational characteristics and cost-effectiveness. In the non-destructive analysis of intact bars, the root mean square error of cross prediction (RMSEP) values were 0.611% (benchtop) and 0.545–0.659% (miniaturized) with PLSR, and 0.506% (benchtop) and 0.482–0.580% (miniaturized) with GPR calibration, while the analyzed total protein content was 19.3–23.0%. For milled samples, with PLSR the RMSEP values improved to 0.210% for benchtop spectrometer but remained in the inferior range of 0.525–0.571% for the miniaturized ones. GPR calibration improved the predictive performance of the miniaturized spectrometers, with RMSEP values of 0.230% (MicroNIR 1700 ES), 0.326% (Tellspec) and 0.338% (SCiO). Furthermore, Tellspec and SCiO sensors are consumer-oriented devices, and their combined use for enhanced performance remains a viable economical choice. With GPR calibration and test-set validation performed for fused (Tellspec + SCiO) data, the RMSEP values were improved to 0.517% (in the analysis of intact samples) and 0.295% (for milled samples).

Machine Vision for Ripeness Estimation in Viticulture Automation

Ripeness estimation of fruits and vegetables is a key factor for the optimization of field management and the harvesting of the desired product quality. Typical ripeness estimation involves multiple manual samplings before harvest followed by chemical analyses. Machine vision has paved the way for agricultural automation by introducing quicker, cost-effective, and non-destructive methods. This work comprehensively surveys the most recent applications of machine vision techniques for ripeness estimation. Due to the broad area of machine vision applications in agriculture, this review is limited only to the most recent techniques related to grapes. The aim of this work is to provide an overview of the state-of-the-art algorithms by covering a wide range of applications. The potential of current machine vision techniques for specific viticulture applications is also analyzed. Problems, limitations of each technique, and future trends are discussed. Moreover, the integration of machine vision algorithms in grape harvesting robots for real-time in-field maturity assessment is additionally examined.

Reduction of the Number of Samples for Cost-Effective Hyperspectral Grape Quality Predictive Models

Developing chemometric models from near-infrared (NIR) spectra requires the use of a representative calibration set of the entire population. Therefore, generally, the calibration procedure requires a large number of resources. For that reason, there is a great interest in identifying the most spectrally representative samples within a large population set. In this study, principal component and hierarchical clustering analyses have been compared for their ability to provide different representative calibration sets. The calibration sets generated have been used to control the technological maturity of grapes and total phenolic compounds of grape skins in red and white cultivars. Finally, the accuracy and precision of the models obtained with these calibration sets resulted from the application of the selection algorithms studied have been compared with each other and with the whole set of samples using an external validation set. Most of the standard errors of prediction (SEP) in external validation obtained from the reduced data sets were not significantly different from those obtained using the whole data set. Moreover, sample subsets resulting from hierarchical clustering analysis appear to produce slightly better results.

A high-throughput and machine learning resistance monitoring system to determine the point of resistance for Escherichia coli with tetracycline: Combining UV-visible spectrophotometry with principal component analysis

UV-visible spectroscopy (UV-Vis) is routinely used in microbiology as a tool to check the optical density (OD) pertaining to the growth stages of microbial cultures at the single wavelength of 600 nm, better known as the OD₆₀₀ . Typically, modern UV-Vis spectrophotometers can scan in the region of approximately 200-1000 nm in the electromagnetic spectrum, where users do not extend the use of the instrument's full capability in a laboratory. In this study, the full potential of UV-Vis spectrophotometry (multiwavelength collection) was used to examine bacterial growth phases when treated with antibiotics showcasing the ability to understand the point of resistance when an antibiotic is introduced into the media and therefore understand the biochemical changes of the infectious pathogens. A multiplate reader demonstrated a high throughput experiment (96 samples) to understand the growth of Escherichia coli when varied concentrations of the antibiotic tetracycline was added into the well plates. Principal component analysis (PCA) and partial least squares discriminant analysis were then used as the data mining techniques to interpret the UV-Vis spectral data and generate machine learning "proof of principle" for the UV-Vis spectrophotometer plate reader. Results from this study showed that the PCA analysis provides an accurate yet simple visual classification and the recognition of E. coli samples belonging to each treatment. These data show significant advantages when compared to the traditional OD₆₀₀ method where we can now understand biochemical changes in the system rather than a mere optical density measurement. Due to the unique experimental setup and procedure that involves indirect use of antibiotics, the same test could be used for obtaining practical information on the type, resistance, and dose of antibiotic necessary to establish the optimum diagnosis, treatment, and decontamination strategies for pathogenic and antibiotic resistant species.