Environmental Sustainability and Mold Hygiene in Buildings

Measurement and prediction of the Aspergillus niger spore detachment from a vesicle unit subjected to air-blowing

Detachment of fungal spores from growing colonies results in human exposure. Thus far, the distribution of the binding forces of the spores in a fungal unit is unknown, so that precise prediction of the spores detachment is quite challenging. This investigation used centrifugal separation to measure the binding forces of the spores. Aspergillus niger (A. niger) colonies on a culture plate were placed in a centrifuge, the detached spores were counted, and this number was used to obtain the distribution of binding forces. Next, the air-blowing of an A. niger unit was modeled by computational fluid dynamics (CFD). A spore was judged to be detached if the air-imposed drag force was greater than the binding force. For model validation, the predicted spore detachment ratios were compared with the ratios measured in a wind tunnel test. The results revealed that the binding forces of the spores obeyed the log-normal distribution. The binding forces of the distal spores from colonies with a growth age of 66 h ranged from 0 nN to 4.0 nN and had a mean of 0.65 nN. The CFD modeling predicted the detachment ratios of the distal spores with good accuracy.

Mechanisms of indoor mold survival under moisture dynamics, a special water treatment approach within the indoor context

Mold contamination is one of the most important causes for indoor air pollution. Previous studies have indicated the feasibility of employing wet-dry cycles, a special water treatment approach in indoor environments, to control indoor mold contamination. However, the underlying mechanisms regulating the responses of indoor molds to changing moisture conditions remains to be elucidated. Here, we studied the mechanisms regulating the responses to wet-dry cycles (termed as moisture dynamics) in Aspergillus penicillioides, Cladosporium cladosporioides, and Aspergillus niger. First, the dormant spores of each mold species were grown to the swollen stage. Next, swollen spores were incubated at different water activity (a_w) levels (0.4, 0.6 and 0.8 a_w) for up to 15 days. Afterward, the viability, lipid peroxidation and antioxidant activities (both enzymatic and non-enzymatic) of treated molds were determined. Our results show that the mold species that survived better under moisture dynamics also encountered less oxidative damage and exhibited stronger antioxidant activities. Moreover, lower RH imposed severer oxidative stress to C. cladosporioides and A. niger. Pearson correlation coefficient indicate significant correlations between oxidative stress and a_w of dry periods, oxidative damage and mold survival, as well as oxidative responses and mold survival. Collectively, these results imply that oxidative stress adaptation regulates the viability of A. penicillioides, C. cladosporioides, and A. niger in response to moisture dynamics. Our findings facilitate the development of novel engineering solutions for indoor air pollution.

Temperature versus Relative Humidity: Which Is More Important for Indoor Mold Prevention?

Temperature is known as one of the abiotic factors that can affect mold growth. Many mold growth prediction models consider temperature as one of the parameters that can significantly impact mold growth indoors, and hence temperature has been targeted by different indoor mold prevention strategies on different premises. For example, European guidelines for libraries suggest a temperature of 19 °C to preserve books. However, running low temperature air-conditioning (AC) costs substantially more energy, and thus a higher temperature (e.g., 25.5 °C) has been regularly proposed as the recommended indoor temperature for general indoor environments in Hong Kong. It is, therefore, needed to understand whether or not the reduction of indoor temperature would lead to better effectiveness of mold prevention. Using Cladosporium cladosporioides (C. cladosporioides) as the model, its germinating spores were challenged in C. cladosporioides to wet-dry cycles with different combinations of relative humidity (RH, 40%, 60% and 80%) and temperature (19 °C and 28 °C) levels. The survival, lipid peroxidation and catalase (CAT) activity of the treated spores were monitored and compared. C. cladosporioides spores showed similar levels of viability, lipid peroxidation and CAT activity when they were exposed to 19 °C and 28 °C at the same RH, but substantially lower survival and higher oxidative stress were observed under the wet-dry cycles with 40% RH dry periods compared with 60% and 80% RH at both temperatures, suggesting that indoor temperature does not tend to affect the resistance of C. cladosporioides to wet-dry cycles as significantly as the RH level of the dry period. Collectively, this study suggests a more important role for moisture over temperature in indoor mold prevention. The outcome of this study may facilitate the sustainable management of indoor mold problems in buildings.

Current challenges for shaping the sustainable and mold-free hygienic indoor environment in humid regions

Indoor mold grows ubiquitously in humid areas and can affect occupants' health. To prevent indoor mold contamination, one of the key measures suggested by the World Health Organisation and United States Environmental Protection Agency is to maintain an indoor relative humidity (RH) level below 75% or at 30-60%, respectively. However, in tropical and subtropical areas, maintaining these suggested RH levels is equivalent to operating a 24-h air-conditioner (AC) or dehumidifier, which is energy-consuming. As a large part of building expense, the operation time of ACs has been regularly proposed to be cut down because of the requirement of building sustainability. This leads to a trade-off between sustainable building performance and indoor mold hygiene. To balance this trade-off, more sustainable alternatives, such as those that target physical environments (e.g. nutrient and temperature level) or apply new surface coating technologies to inhibit mold growth, have been launched. Despite these initiatives, indoor mold contamination remains an unresolved issue, mainly because these alternative measures only exhibit limited effectiveness or require extra effort. This review aims to summarize the currently adopted mold control measures and discuss their limitations as well as the direction for the future development of sustainable mold control strategies. SIGNIFICANCE AND IMPACT OF THE STUDY: People spend most of their time indoors and hence the presence of indoor mold contamination can compromise the occupants' health. With the wake of climate change which is expected to see an increase in RH and temperature, tropical and subtropical areas are even more prone to mold contamination than they used to be. This study may help facilitate the development of sustainable and effective mold control strategies in the indoor environment.