The Efficiency of the Removal of Naphthalene from Aqueous Solutions by Different Adsorbents

Evaluation of resistance patterns and bioremoval efficiency of hydrocarbons and heavy metals by the mycobiome of petroleum refining wastewater in Jazan with assessment of molecular typing and cytotoxicity of Scedosporium apiospermum JAZ-20

Jazan Industrial Economic City (JIEC) is located on the Red Sea coast in the province of Jazan, southwest of Saudi Arabia anchors diverse heavy and secondary industries in the energy, water desalination, petroleum, aluminum, copper, refineries, pharmaceuticals and food manufacturing fields. These various industries generate a large quantity of industrial wastewaters containing various toxicants. The present work represents ecologically beneficial alternatives for the advancement of environmental biotechnology, which could help mitigate the adverse impacts of environmental pollution resulting from petroleum refining effluents. The mycobiome (32 fungal strains) isolated from the industrial wastewater of the refinery sector in Jazan were belonged to five fungal genera including Fusarium, Verticillium, Purpureocillium, Clavispora and Scedosporium with a distribution percentage of 31.25, 21.88, 15.63, 12.50 and 18.75 %, respectively. These isolates showed multimetals tolerance and bioremoval efficiency against a large number of heavy metals (Fe2+, Ni2+, Cr6+, Zn2+, As3+, Cu2+, Cd2+, Pb2+, Ag+ and Hg2+) along with potent bioremediation activity toward crude oil and the polycyclic aromatic hydrocarbons. Interestingly, the mycobiome resistance patterns obtained against different classes of fungal antibiotics including azole (fluconazole, itraconazole, voriconazole, posaconazole, isavuconazole and ketoconazole), echinocandin (anidulafungin, caspofungin and micafungin) and polyene (amphotericin B) drugs proved the prevalence of antibiotic resistance among the mycobiome of refinery industry in Saudi Arabia is relatively low. The fungal isolate under isolation code JAZ-20 showed the highest bioremoval efficiency against heavy metals (90.8-100.0 %), crude oil (89.50 %), naphthalene (96.7 %), phenanthrene (92.52 %), fluoranthene (100.0 %), anthracene (90.34 %), pyrene (85.60 %) and chrysene (83.4 %). It showed the highest bioremoval capacity ranging from 85.72 % to 100.0 % against numerous pollutants found in a wide array of industrial effluents, including diclofenac, ibuprofen, carbamazepine, acetaminophen, sulfamethoxazole, bisphenol, bleomycin, vincristine, dicofol, methyl parathion, atrazine, diuron, dieldrin, chlorpyrifos, profenofos and phenanthrene. The isolate JAZ-20 was chosen for molecular typing, cytotoxicity assessment, analysis of volatile compounds and optimization investigations. Based on phenotypic, biochemical and phylogenetic analysis, strain JAZ-20 identified as Scedosporium apiospermum JAZ-20. This strain is newly discovered in industrial effluents in Saudi Arabia. Fungal strain JAZ-20 consistently produced various types of saturated and unsaturated fatty acids. the main fatty acids were C14:0 (1.95 %), iso-C14:0 (2.98 %), anteiso-C14:0 (2.13 %), iso-C15:0 (9.16 %), anteiso-C15:0 (11.75 %), C15:0 (7.42 %), C15:1 (2.37 %), anteiso-C16:0 (3.4 %), C16:0 (10.3 %), iso-C16:0 (9.5 %), C17:1 (1.36 %), anteiso-C17:1 (8.64 %), iso-C18:0 (11.0 %), C18:0 (3.63 %), anteiso-C19:0 (3.78 %), anteiso-C20:0 (2.0 %), iso-C21:0 (2.44 %), C23:0 (1.15 %), and C24:0 (2.17 %). These fatty acids serve as natural and eco-friendly antifungal agents, promoting fungal resistance and inhibiting the production of mycotoxins in the environment. Despite being an environmental isolate, its cytotoxicity was assessed against both normal and cancerous human cell lines. The IC50 values of JAZ-20 extract were 8.92, 10.41, 20.0, 16.5, and 40.0 μg/mL against WI38, MRC5, MCF10A, HEK293 and HDFs normal cells and 43.26, 33.75, and 40.0 μg/mL against liver (HepG2), breast (A549) and cervix (HeLa) cancers, respectively. Based on gas chromatography-mass spectrometry (GC-MS), analysis the extract of S. apiospermum JAZ-20 showed 47 known volatile compounds (VOCs) for varied and significant biological activities. Enhancing the bioremoval efficiency of heavy metals from actual refining wastewater involves optimizing process parameters. The parameters optimized were the contact time, the fungal biomass dosage, pH, temperature and agitation rate.

High-Strength Organic-Inorganic Composites with Superior Thermal Insulation and Acoustic Attenuation

We demonstrate facile fabrication of highly filled, lightweight organic-inorganic composites comprising polyurethanes covalently linked with naturally occurring clinoptilolite microparticles. These polyurethane/clinoptilolite (PUC) composites are shown to mitigate particle aggregation usually observed in composites with high particle loadings and possess enhanced thermal insulation and acoustic attenuation compared with conventionally employed materials (e.g., drywall and gypsum). In addition to these functional properties, the PUC composites also possess flexural strengths and strain capacities comparable to and higher than ordinary Portland cement (OPC), respectively, while being ∼1.5× lighter than OPC. The porosity, density, and mechanical and functional properties of these composites are tuned by systematically varying their composition (diisocyanate, polyurethane, and inorganic contents) and the nature of the organic (reactivity and source of polyol) components. The fabrication process involves mild curing conditions and uses commonly available reagents (naturally occurring aluminosilicate particles, polyols, and diisocyanate), thereby making the process scalable. Finally, the composite properties are shown to be independent of the polyol source (virgin or recycled), underlining the generality of this approach for the scalable utilization of recycled polyols.

Removal of Acetaminophen from Aqueous Solutions in an Adsorption Process

Acetaminophen (C8H9NO2, also called paracetamol) is an active metabolite of phenacetin with antipyretic and analgesic effects and has been extensively used as a painkiller. Currently, the problem of pharmaceuticals in water and sewage is common, especially in highly urbanized countries. Laboratory-scale experiments were carried out using an adsorbent-granulated activated carbon (WD-extra)-to remove acetaminophen (ACT) from water. The initial concentration of acetaminophen was 20 mg ACT/dm3. The adsorption kinetics, influence of the pH on adsorption and dose of the used adsorbent were determined under batch conditions. The adsorption of ACT on activated carbon was more efficient when the water solution was acidic (at pH 2, it was the most effective). The highest percentage of removal (99%) was obtained for the WD-extra dose of 10.0 g/dm3. The time taken to establish the dynamic equilibrium of the system was 60 min. The effectiveness of adsorption was determined based on the Freundlich and Langmuir adsorption isotherms. It was found that WD-extra activated carbon effectively removed ACT from water solutions.

Bioremoval of some heavy metals from aqueous solutions by two different indigenous fungi Aspergillus sp. AHM69 and Penicillium sp. AHM96 isolated from petroleum refining wastewater

Myco-remediation of heavy metals using indigenous fungi of different petroleum refining areas in Egypt was applied. Among the physicochemical parameters determined in these refineries effluents, the highest levels of heavy metals were recorded for the most toxic heavy metals Fe³⁺ and Co²⁺. The fungal isolates under the isolation codes AHM69 and AHM96 isolated from the mycobiome of Mostorod and Tanta refineries, respectively showed the best bioremoval efficiency toward heavy metals from the real wastewater mixture and polycyclic aromatic hydrocarbons from aqueous solutions. Based on phenotypic and genotypic analysis they were identified as Aspergillus sp. AHM69 and Penicillium sp. AHM96. The optimum conditions for the best bioremoval of Fe³⁺ and Co²⁺ from aqueous solutions by Aspergillus sp. AHM69 were live biomass, temperature 45–55 °C, pH 4.5–5.0, contact time 180 min, metal concentration equal to 1000 and 400 mg/L of Fe³⁺ and Co²⁺ with live fungal biomass dose of 0.5% and 0.4% with Fe³⁺ and Co²⁺, respectively. Concerning to the biomass of Penicillium sp. AHM96, the optimum operation conditions for the best removal of Fe³⁺ and Co²⁺ were 45 °C, pH 5.0 and 400 mg/L of Fe³⁺ with 1.0% biosorbent dosage or 1000 mg/L of Co²⁺ with 0.5% biosorbent dosage for 180 min as process time. Furthermore, FTIR analysis showed masking, shifting, creating and absenting of different functional groups in the fungal biomass surface of AHM96 and AHM69 strains in the presence of Fe³⁺ and Co²⁺ compared to unloaded biomasses. Microscopy with Energy Dispersive X-ray analysis (SEM-EDX) indicated that the removal of Fe³⁺ and Co²⁺ by fungi AHM69 and AHM96 was via biosorption and bioaccumulation on the biomass surface. Our results suggested that in the near future, fungal treatment is likely to outperform and replace other chemical and biological treatments in industrial wastewater treatment for oil refining.

Primary and Secondary Emissions of VOCs and PAHs in Indoor Air from a Waterproof Coal-Tar Membrane: Diagnosis and Remediation

Primary and secondary emissions of volatile organic compounds (VOCs) and polycyclic aromatic hydrocarbons (PAHs) from a waterproof coal tar membrane and their effect on the indoor air quality were investigated through a case study in a residential building situated in Madrid, Spain. The air contaminants were analyzed in situ using photoionization method and several samples of contaminants were taken using three sorbents: activated carbon, XAD2 and Tenax GR. It was found that various VOCs such as toluene, p- and m-Xylene, PAHs such as naphthalene, methyl-naphthalenes, acenaphthene, acenaphthylene, phenanthrene and fluorine, volatile organic halogens including chloroform and trichlorofluoromethane, and alkylbenzene (1,2,4-trimethylbenzene) were found at concentrations, which exceeded the limits established by international and national agencies (WHO, EPA, OSHA). Some of the above organic compounds were found also in the samples of construction and building materials, which were obtained at different heights and places. The analysis of possible sources of the contaminants pointed at the original coal-tar membrane, which was applied on the terrace to be waterproof. During a posterior reparation the membrane was coated with a new one that hindered dissipation of emitted contaminants. The contaminants leached out and were absorbed by construction materials down in the dwelling. These materials then acted as secondary emission sources. To remediate the emission problem as the contaminated materials were removed and then a ventilation system was installed to force the gasses being emitted from the rest of contaminated slab outside. Follow-up has validated the success of the remediation procedure.

Utilization of activated carbon derived from waste plastic for decontamination of polycyclic aromatic hydrocarbons laden wastewater

Serious environmental deterioration caused by synthetic waste plastics, and the pollution of freshwater resources are the most alarming and marked challenges of the 21st century. Therefore, immense scientific efforts are being made towards the management of waste plastics and treatment of polluted water. The current study reports on the utilization of waste polyethylene terephthalate (wPET) and waste polystyrene (wPS) for fabrication of activated carbon (AC) and its application for the removal of hazardous polycyclic aromatic hydrocarbons (PAHs) pollutants from water. AC was prepared from wPET and wPS by carbonization under a N₂ atmosphere followed by chemical activation with 1 M KOH and 1 M HCl. The AC was characterized by scanning electron microscopy, surface area analysis, and Fourier transform infrared spectroscopy. Adsorption of PAHs from aqueous solutions through AC was examined by batch adsorption tests. The optimum parameters for maximum adsorption of PAHs were found to be: initial PAHs concentration 40 ppm, 2 h contact time, pH 3, 5, and 7, 50 °C temperature and adsorbent dose of 0.8 g. Kinetic and isotherm models were applied to evaluate the adsorbent capacity for PAHs adsorption. The kinetic study shows that the adsorption of these PAHs onto AC follows pseudo-second-order kinetics. The experimental results demonstrated that the Langmuir isotherm model best fitted the data. The thermodynamic factors calculated such as entropy change (ΔS°), enthalpy change (ΔS°) and free energy change (ΔG°) show that the adsorption process is non-spontaneous and endothermic in nature. Results were also compared with the efficiencies of some commercial adsorbents used in practice. This examination revealed that the novel plastic-derived AC possesses a great potential for elimination and recovery of PAH elimination from industrial wastewater.