Evaluation of Fecal Coliform Prevalence and Physicochemical Indicators in the Effluent from a Wastewater Treatment Plant in the North-West Province, South Africa

Clarity tubes as effective citizen science tools for monitoring wastewater treatment works and rivers

Improved freshwater resource management requires the implementation of widespread, effective, and timely water quality monitoring. Conventional monitoring methods are often inhibited by financial, infrastructural, and human capacity limitations, especially in developing regions. This study aimed to validate the citizen-scientist-operated transparency or clarity tube (hereafter "clarity tube") for measuring water clarity as a proxy for total suspended solids (TSS) concentration, a critical quality metric in river systems and wastewater treatment works (WWTW) effluent in Southern Africa. Clarity tubes provided a relatively accurate and precise proxy for TSS in riverine lotic systems and WWTW effluent, revealing significant inverse log-linear relationships between clarity and TSS with r2 = 0.715 and 0.503, respectively. We demonstrate that clarity-derived estimates of TSS concentration (TSScde) can be used to estimate WWTW compliance with WWTW effluent TSS concentration regulations. The measurements can then be used to engage with WWTW management, potentially affecting WWTW performance. Overall, these findings demonstrate the usefulness of clarity tubes as low-cost, accessible, and easy-to-use citizen science tools for high spatial and temporal resolution water quality monitoring, not only in rivers in Southern Africa but also in WWTW effluent for estimating compliance, with strong global relevance to the sustainable development goals (SDGs). Integr Environ Assess Manag 2024;20:1463-1472. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

The screening of emerging micropollutants in wastewater in Sol Plaatje Municipality, Northern Cape, South Africa

Although pollutants pose environmental and human health risks, the majority are not routinely monitored and regulated. Organic pollutants emanate from a variety of sources, and can be classified depending on their chemistry and environmental fate. Classification of pollutants is important because it informs fate processes and apposite removal technologies. The occurrence of emerging contaminants (ECs) in water bodies is a source of environmental and human health concern globally. Despite being widely reported, data on the occurrence of ECs in South Africa are scarce. Specifically, ECS in wastewater in the Northern Cape in South Africa are understudied. In this study, various ECs were screened in water samples collected from three wastewater treatment plants (WWTPs) in the province. The ECs were detected using liquid chromatography coupled to high resolution Orbitrap mass spectrometry following Oasis HLB solid-phase extraction. The main findings were: (1) there is a wide variety of ECs in the WWTPs, (2) physico-chemical properties such as pH, total dissolved solids, conductivity, and dissolved organic content showed reduced values in the outlet compared to the inlet which confirms the presence of less contaminants in the treated wastewater, (3) specific ultraviolet absorbance of less than 2 was observed in the WWTPs samples, suggesting the presence of natural organic matter (NOM) that is predominantly non-humic in nature, (4) most of the ECs were recalcitrant to the treatment processes, (5) pesticides, recreational drugs, and analgesics constitute a significant proportion of pollutants in wastewater, and (6) NOM removal ranged between 35 and 90%. Consequently, a comprehensive database of ECs in wastewater in Sol Plaatje Municipality was created. Since the detected ECs pose ecotoxicological risks, there is a need to monitor and quantify ECs in WWTPs. These data are useful in selecting suitable monitoring and control strategies at WWTPs.

New standards at European Union level on water reuse for agricultural irrigation: Are the Spanish wastewater treatment plants ready to produce and distribute reclaimed water within the minimum quality requirements?

The new European regulation on minimum quality requirements (MQR) for water reuse (EU, 2020/741) was launched in May 2020 and describes the directives for the use of reclaimed water for agricultural irrigation. This Regulation will be directly applicable in all Member States from 26 June 2023. Since its publication in 2020, concerns have raised about potential non-compliance situations in water reuse systems. The present study represents a case study where three different water reuse systems have been monitored to establish their compliance with the MQR. Each water reuse system includes a wastewater treatment plant (WWTP), a distribution/storage system and an end-user point, where water is used for irrigation of leafy greens. The selected water reuse systems allowed us to compare the efficacy of water treatments implemented in two WWTPs as well as the impact of three different irrigation systems (drip, furrow and overhead irrigation). The presence and concentration of indicator microorganisms (Escherichia coli and C. perfringens spores) as well as pathogenic bacteria (Shiga toxin-producing, E. coli (STEC), E. coli O157:H7, and Salmonella spp.) were monitored in different sampling points (influent and effluent of the WWTPs, water reservoirs located at the distribution system and the end-user point at the irrigation system as well as in the leafy greens during their growing cycle. Average levels of E. coli (0.73 ± 1.20 log cfu E. coli/100 mL) obtained at the point where the WWTP operator delivers reclaimed water to the next actor in the chain, defined in the European regulation as the 'point of compliance', were within the established MQR (<1 log cfu/100 mL) (EU, 2020/741). On the other hand, average levels of E. coli at the end-user point (1.0 ± 1.2 log cfu/100 mL) were below the recommended threshold (2 log cfu E. coli/100 mL) for irrigation water based on the guidance document on microbiological risks in fresh fruits and vegetables at primary production (EC, 2017/C_163/01). However, several outlier points were observed among the samples taken at the irrigation point, which were linked to a specific cross-contamination event within the distribution/storage system. Regarding pathogenic bacteria, water samples from the influent of the WWTPs showed a 100% prevalence, while only 5% of the effluent samples were positive for any of the monitored pathogenic bacteria. Obtained results indicate that reclaimed water produced in the selected water reuse system is suitable to be used as irrigation water. However, efforts are necessary not only in the establishment of advance disinfection treatments but also in the maintenance of the distribution/storage systems.

Development of Fluorescence In Situ Hybridization as a Rapid, Accurate Method for Detecting Coliforms in Water Samples

Coliform bacteria are indicators of water quality; however, most detection methods for coliform bacteria are time-consuming and nonspecific. Here, we developed a fluorescence in situ hybridization (FISH) approach to detect four types of coliform bacteria, including Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, and Citrobacter freundii, simultaneously in water samples using specific probes for 16S rRNA. This FISH method was applied to detect coliform bacteria in simulated water and domestic wastewater samples and compared with traditional detection methods (e.g., plate counting, multiple-tube fermentation (MTF) technique, and membrane filter (MF) technique). Optimal FISH conditions for detecting the four types of coliforms were found to be fixation in 3% paraformaldehyde at 4 °C for 2 h and hybridization at 50 °C for 1.5 h. By comparing FISH with plate counting, MTF, MF, and a commercial detection kit, we found that FISH had the shortest detection time and highest accuracy for the identification of coliform bacteria in simulated water and domestic wastewater samples. Moreover, the developed method could simultaneously detect individual species and concentrations of coliform bacteria. Overall, our findings indicated that FISH could be used as a rapid, accurate biosensor system for simultaneously detecting four types of coliform bacteria to ensure water safety.