Inorganic Fiber Lung Burden in Subjects with Occupational and/or Anthropogenic Environmental Asbestos Exposure in Broni (Pavia, Northern Italy): An SEM-EDS Study on Autoptic Samples

Asbestos burden in lungs of non-occupationally exposed women from Broni (Pavia, Italy): a postmortem SEM-EDS study

Background

In Italy the incidence of malignant mesothelioma (MM) among women is remarkably high, due to the several contexts in which women had been exposed to asbestos. However, very few studies in literature focus on the inorganic lung content in women. The aim of this retrospective, observational study is to investigate the asbestos lung burden, in terms of concentration, dimensions and type of asbestos, in 42 women who died from MM and had been non-occupationally exposed to asbestos during the activity of the asbestos-cement plant located in Broni (Pavia, Northern Italy) where mainly chrysotile, crocidolite and amosite were used.

Methods

Lung samples taken during forensic autopsies have been digested using sodium hypochlorite and filtered through a cellulose-ester membrane. The filter was examined using a scanning electron microscope and the chemical composition of the fibers was analyzed using an electron dispersive spectroscopy. The number of detected inorganic fibers, asbestos fibers and asbestos bodies (ABs) were normalized to 1 gram of dry tissue.

Results

In six samples no asbestos has been detected. Overall, the most represented kind of asbestos was amosite, followed by crocidolite, tremolite/actinolite asbestos and chrysotile. The concentration of all inorganic fibers was significantly higher in women with environmental and household exposures compared with those with only environmental exposure (P=0.025), as well as the concentration of asbestos fibers (P=0.019) and ABs (P=0.049). We found a significant correlation between the concentration of asbestos fibers and the duration of exposure (rho =0.413, P=0.008), as well as with the latency of MM (rho =0.427, P=0.005). The distance of the residential address from the factory and the time spent daily in contact with asbestos did not influence the lung asbestos burden.

Conclusions

These results suggest the relevance of the lung clearance of asbestos, regarding mainly chrysotile. As a consequence, although scanning electron microscopy -energy dispersive X-ray spectroscopy (SEM-EDS) is considered the most reliable tool for assessing previous exposure to asbestos, its results should be interpreted with caution, especially in a legal context. In addition, our data confirm the relevance of environmental and household exposure in determining asbestos concentration in lungs and highlight the importance of household exposure.

A postmortem case control study of asbestos burden in lungs of malignant mesothelioma cases

BACKGROUND

Asbestos lung content is regarded as the most reliable tool for causal attribution of malignant mesothelioma (MM) to previous asbestos exposures. However, there is a lack of studies on asbestos burden in lungs of MM patients in comparison with healthy individuals. This study aims to provide such a comparison, investigating, as well, differences in asbestos lung burden with sex and time trends.

METHODS

Asbestos lung content has been assessed on formalin-fixed lung fragments using scanning electron microscopy coupled with energy dispersion spectroscopy (SEM-EDS) on individuals deceased from MM (cases) and healthy subjects without any lung disease who died from violent causes (controls) between 2005 and 2023.

RESULTS

Asbestos and asbestos bodies (ABs) were found, respectively, in 73.7% and 43.2% of cases and in 28 and 22% of controls; in MM cases the most represented asbestos types were crocidolite and amosite, whereas in controls it was tremolite-actinolite asbestos. The concentration of both asbestos fibers and ABs was statistically significantly higher in MM cases compared to controls. The mean asbestos fibers width was also significantly higher in cases than controls. Males and females with MM showed similar asbestos and ABs concentrations, but females had higher concentrations of chrysotile, and significantly lower fibers width compared to males. Time trends show that MM lung asbestos concentrations decreased starting in 2011.

DISCUSSION

The results suggest a correlation between asbestos burden in lungs and MM risk. The different concentration of chrysotile, as well as the different width of asbestos fibers in MM males and females might reflect a sex difference in response of the lung microenvironment to inhaled asbestos. Finally, this study provides the first pathological evidence of the effect of the ban of asbestos use, demonstrating a significant decrease of asbestos lung content after 2011.

The role of single nucleotide polymorphisms related to iron homeostasis in mesothelioma susceptibility after asbestos exposure: a genetic study on autoptic samples

Asbestos-related diseases still represent a major public health problem all over the world. Among them, malignant mesothelioma (MM) is a poor-prognosis cancer, arising from the serosal lining of the pleura, pericardium and peritoneum, triggered by asbestos exposure. Literature data suggest the key role of iron metabolism in the coating process leading to the formation of asbestos bodies, considered to be both protective and harmful. Two sample sets of individuals were taken into consideration, both residing in Broni or neighboring cities (Northwestern Italy) where an asbestos cement factory was active between 1932 and 1993. The present study aims to compare the frequency of six SNPs involved in iron trafficking, previously found to be related to protection/predisposition to MM after asbestos exposure, between 48 male subjects with documented asbestos exposure who died of MM and 48 male subjects who were exposed to asbestos but did not develop MM or other neoplastic respiratory diseases (Non-Mesothelioma Asbestos Exposed - NMAE). The same analysis was performed on 76 healthy male controls. The allelic and genotypic frequencies of a sub-group of 107 healthy Italian individuals contained in the 1000 genomes database were considered for comparison. PCR-multiplex amplification followed by SNaPshot mini-sequencing reaction was used. The findings presented in this study show that the allelic and genotypic frequencies for six SNP markers involved in iron metabolism/homeostasis and the modulation of tumor microenvironment are not significantly different between the two sample sets of MM and NMAE. Therefore, the SNPs here considered do not seem to be useful markers for individual susceptibility to mesothelioma. This finding is not in agreement with previous literature.

Lung asbestos fiber burden analysis: effects of the counting rules for legal medicine evaluations

OBJECTIVES

The work shows the effect of counting rules, such as analysis magnification and asbestos fiber dimension to be count (with length ≥5 µm or also asbestos fibers with length <5 µm) in the lung asbestos fiber burden analysis for legal medicine evaluations.

METHODS

On the same lung tissue samples, two different analyses were carried out to count any asbestos fibers with length ≥1 µm and with length ≥5 µm. Results of the amphibole burden of the two analyses were compared by linear regression analysis on log10-transformed values.

RESULTS

The analysis should be carried out at an appropriate magnification and on samples prepared in such a way as they allow the counting of very fine fibers. If the analysis is limited to the asbestos fibers with length ≥5 µm, there is a high risk of not detecting possible residual chrysotile fiber burden and thinner crocidolite asbestos fibers.

CONCLUSIONS

On average we estimated that 1 amphibole fiber with length ≥5 µm corresponds to ∼8 amphibole fibers with length ≥1 µm in the lung. The values of the Helsinki criteria should be updated taking this into account.

Epidemiology, clinical and physiological manifestations of dust lung disease in major industrial centers

BACKGROUND

The present study aims to determine the structure of morbidity in workers contacting industrial aerosols, assess the timeliness of diagnosing dust-induced lung disease in major industrial centers, and optimize diagnostics for early detection of occupational lung diseases in workers exposed to industrial dust hazards.

METHODS

The study on the structure and incidence of occupational lung diseases was carried out in 2016-2020 based on the Moscow Centre for Occupational Pathology data. For a more in-depth clinical examination, 114 patients who were first admitted to the Occupational Pathology Centre with diagnosed pneumoconiosis (PC), chronic dust-induced bronchitis (CDB), and chronic obstructive pulmonary disease (COPD) were selected. All patients were subjected to a complex clinical-functional, spirographic, echocardiographic, fibroscopic, radiological, and CT lung examination, with subsequent analysis of the results obtained. The pathology caused by exposure to industrial aerosols within the studied period was first diagnosed in 344 workers. Most patients (64%) with newly detected pathologies were 50-59 years of age, with work experience in adverse conditions of 21-25 years (41%).

RESULTS

The spirographic study of respiratory function revealed decreased forced vital capacity (FVC) indices in CDB and COPD patients. Changes in expiratory flow rates suggest occupational bronchitis at an earlier stage, whereas no apparent results were noted for the PC diagnosis. The results of fibroscopic examination in PC patients revealed atrophic processes of the bronchial mucosa in 46 (88.5%) of them, and 6 (11.5%) patients had a subtropic process. The results of echocardiographic examination allowed diagnosing pulmonary heart disease in 83 patients (72.8%). Of them, 42 (80.8%) were revealed in the group of patients with PC, 18 (50.0%) in the COB group, and 14 (53.8%) in the COPD group.

CONCLUSIONS

Computed tomography (CT) detected pathological changes in 52 patients, while the X-ray examination in six people showed no evidence of lung destruction. CT scan also showed that the number of patients with fibrotic PC (including silicosis) in the study groups increased. Timely clinical and functional examination (spirography, fibroscopy, echocardiography) of patients allows detecting PC (including silicosis), CDB, and COPD at an early stage of disease progression.

Asbestos and Other Hazardous Fibrous Minerals: Potential Exposure Pathways and Associated Health Risks

There are six elongate mineral particles (EMPs) corresponding to specific dimensional and morphological criteria, known as asbestos. Responsible for health issues including asbestosis, and malignant mesothelioma, asbestos has been well researched. Despite this, significant exposure continues to occur throughout the world, potentially affecting 125 million people in the workplace and causing thousands of deaths annually from exposure in homes. However, there are other EMPS, such as fibrous/asbestiform erionite, that are classified as carcinogens and have been linked to cancers in areas where it has been incorporated into local building materials or released into the environment through earthmoving activities. Erionite is a more potent carcinogen than asbestos but as it is seldom used for commercial purposes, exposure pathways have been less well studied. Despite the apparent similarities between asbestos and fibrous erionite, their health risks and exposure pathways are quite different. This article examines the hazards presented by EMPs with a particular focus on fibrous erionite. It includes a discussion of the global locations of erionite and similar hazardous minerals, a comparison of the multiple exposure pathways for asbestos and fibrous erionite, a brief discussion of the confusing nomenclature associated with EMPs, and considerations of increasing global mesothelioma cases.

Asbestos bodies count and morphometry in bulk lung tissue samples by non-invasive X-ray micro-tomography

The number of the Asbestos Bodies (AB), i.e. asbestos that developed an iron-protein coating during its permanence in biological tissues, is one of the most accessible markers of asbestos exposure in individuals. The approaches developed to perform AB count in biological tissues are based on the manual examination of tissue digests or histological sections by means of light or electron microscopies. Although these approaches are well established and relatively accessible, manual examination is time-consuming and can be reader-dependent. Besides, approximations are applied because of the limitations of 2D readings and to speed up manual counts. In addition, sample preparation using tissue digests require an amount of tissue that can only be obtained by invasive surgery or post-mortem sampling. In this paper, we propose a new approach to AB counting based on non-destructive 3D imaging, which has the potential to overcome most of the limitations of conventional approaches. This method allows automating the AB count and determining their morphometry distribution in bulk tissue samples (ideally non-invasive needle biopsies), with minimal sample preparation and avoiding approximations. Although the results are promising, additional testing on a larger number of AB-containing biological samples would be required to fully validate the method.