The Management of Agriculture Plastic Waste in the Framework of Circular Economy. Case of the Almeria Greenhouse (Spain)

New versus naturally aged greenhouse cover films: Degradation and micro-nanoplastics characterization under sunlight exposure

The understanding of microplastic degradation and its effects remains limited due to the absence of accurate analytical techniques for detecting and quantifying micro- and nanoplastics. In this study, we investigated the release of nanoplastics and small microplastics in water from low-density polyethylene (LDPE) greenhouse cover films under simulated sunlight exposure for six months. Our analysis included both new and naturally aged (used) cover films, enabling us to evaluate the impact of natural aging. Additionally, photooxidation effects were assessed by comparing irradiated and non-irradiated conditions. Scanning electron microscopy (SEM) and nanoparticle tracking analysis (NTA) confirmed the presence of particles below 1 μm in both irradiated and non-irradiated cover films. NTA revealed a clear effect of natural aging, with used films releasing more particles than new films but no impact of photooxidation, as irradiated and non-irradiated cover films released similar amounts of particles at each time point. Raman spectroscopy demonstrated the lower crystallinity of the released PE nanoplastics compared to the new films. Flow cytometry and total organic carbon data provided evidence of the release of additional material besides PE, and a clear effect of both simulated and natural aging, with photodegradation effects observed only for the new cover films. Finally, our results underscore the importance of studying the aging processes in both new and used plastic products using complementary techniques to assess the environmental fate and safety risks posed by plastics used in agriculture.

Environmental and economic assessment of biodegradable and compostable alternatives for plastic materials in greenhouses

Plastics and other materials commonly used in horticulture for plant support (e.g. raffia) and soil protection (e.g. mulching film) pose a challenge to achieving a circular economy. These materials contaminate plant residues, hampering their direct reuse due to the need for separation and cleaning. As a result, contaminated plant residues is often landfilled or incinerated. This study investigates the replacement of conventional plastic raffia and mulching film with biodegradable and compostable alternatives. Polypropylene raffia is compared with a biodegradable viscose polymer and compostable jute fibre, while polyethylene mulching film is compared with a biodegradable polylactic acid film. Conventional and novel alternatives are compared economically using Life-Cycle Costing and environmentally using Life-Cycle Assessment. The economic assessment is based on case studies with two horticultural companies in Almeria (south-eastern Spain), while the environmental analysis uses data from the Ecoinvent database. The use of biodegradable and compostable alternatives for raffia and mulching film proved to be 49% more expensive than conventional options. However, when conventional plastic waste is incinerated rather than landfilled, biodegradable and compostable alternatives have a lower carbon footprint. Although biodegradable and compostable options can be more expensive and have higher impacts in certain situations, proper waste management can lead to environmental benefits. With optimisation and incentives, these alternative options support the transition of horticulture to a sustainable circular economy.

Large-scale automatic extraction of agricultural greenhouses based on high-resolution remote sensing and deep learning technologies

Widely used agricultural greenhouses are critical in the development of facility agriculture because of not only their huge capacity in food and vegetable supplies, but also their environmental and climatic effects. Therefore, it is important to obtain the spatial distribution of agricultural greenhouses for agricultural production, policy making, and even environmental protection. Remote sensing technologies have been widely used in greenhouse extraction mainly in small or local regions, while large-scale and high-resolution (~ 1-m) greenhouse extraction is still lacking. In this study, agricultural greenhouses in an important agricultural province (Shandong, China) are extracted by the combination of high-resolution remote sensing images from Google Earth and deep learning algorithm with high accuracy (94.04% for mean intersection over union over test set). The results demonstrated that the agricultural greenhouses cover an area of 1755.3 km2, accounting for 1.11% of the total province and 2.31% of total cultivated land. The spatial density map of agricultural greenhouses also suggested that the facility agriculture in Shandong has obviously regional aggregation characteristics, which is vulnerable in both environment and economy. The results of this study are useful and meaningful for future agriculture planning and environmental management.

Agricultural plastics as a potential threat to food security, health, and environment through soil pollution by microplastics: Problem definition

The dynamic expansion of the Agricultural Plastics (AP) use has allowed for improved agricultural products quality, yields, and enhanced sustainability along with multiple benefits for the Agrifood sector. The present work investigates the relationship of AP characteristics, use and End-of-Life (EoL) practices with degradation and potential generation of micro-, nanoparticles (MNP) in soil. The composition, functionalities, and degradation behaviour of the contemporary conventional and biodegradable AP categories are systematically analysed. Their market dynamics are briefly presented. The risk and the conditions for the AP potential role in soil pollution and possible MNP generation are analysed based on a qualitative risk assessment approach. AP are classified from high to low-risk products with respect to their probability for soil contamination by MNP based on worst-best scenarios. Proposed alternative sustainable solutions to eliminate the risks are briefly presented for each AP category. Characteristic quantitative estimations of soil pollution by MNP generated by AP are presented for selected case studies reported in the literature. The significance of various indirect sources of agricultural soil pollution by MNP is analysed allowing for appropriate risk mitigation strategies and policies to be designed and implemented.

Degradation of Bio-Based and Biodegradable Plastic and Its Contribution to Soil Organic Carbon Stock

Expanding the use of environmentally friendly materials to protect the environment is one of the key factors in maintaining a sustainable ecological balance. Poly(butylene succinate-co-adipate) (PBSA) is considered among the most promising bio-based and biodegradable plastics for the future with a high number of applications in soil and agriculture. Therefore, the decomposition process of PBSA and its consequences for the carbon stored in soil require careful monitoring. For the first time, the stable isotope technique was applied in the current study to partitioning plastic- and soil-originated C in the CO₂ released during 80 days of PBSA decomposition in a Haplic Chernozem soil as dependent on nitrogen availability. The decomposition of the plastic was accompanied by the C loss from soil organic matter (SOM) through priming, which in turn was dependent on added N. Nitrogen facilitated PBSA decomposition and reduced the priming effect during the first 6 weeks of the experiment. During the 80 days of plastic decomposition, 30% and 49% of the released CO₂ were PBSA-derived, while the amount of SOM-derived CO₂ exceeded the corresponding controls by 100.2 and 132.3% in PBSA-amended soil without and with N fertilization, respectively. Finally, only 4.1% and 5.4% of the PBSA added into the soil was mineralized to CO₂, in the treatments without and with N amendment, respectively.

Upgrading Mixed Agricultural Plastic and Lignocellulosic Waste to Liquid Fuels by Catalytic Pyrolysis

Agriculture generates non-recyclable mixed waste streams, such as plastic (netting, twine, and film) and lignocellulosic residues (bluegrass straw/chaff), which are currently disposed of by burning or landfilling. Thermochemical conversion technologies of agricultural mixed waste (AMW) are an option to upcycle this waste into transportation fuel. In this work, AMW was homogenized by compounding in a twin-screw extruder and the material was characterized by chemical and thermal analyses. The homogenized AMW was thermally and catalytically pyrolyzed (500–600 °C) in a tube batch reactor, and the products, including gas, liquid, and char, were characterized using a combination of FTIR, GC-MS, and ESI-MS. Thermal pyrolysis wax products were mainly a mixture of straight-chain hydrocarbons C7 to C44 and oxygenated compounds. Catalytic pyrolysis using zeolite Y afforded liquid products comprised of short-chain hydrocarbons and aromatics C6 to C23. The results showed a high degree of similarity between the chemical profiles of catalytic pyrolysis products and gasoline.

CEA Systems: the Means to Achieve Future Food Security and Environmental Sustainability?

As demand for food production continues to rise, it is clear that in order to meet the challenges of the future in terms of food security and environmental sustainability, radical changes are required throughout all levels of the global food system. Controlled Environment Agriculture (CEA) (a.k.a. indoor farming) has an advantage over conventional farming methods in that production processes can be largely separated from the natural environment, thus, production is less reliant on environmental conditions, and pollution can be better restricted and controlled. While output potential of conventional farming at a global scale is predicted to suffer due to the effects of climate change, technological advancements in this time will drastically improve both the economic and environmental performance of CEA systems. This article summarizes the current understanding and gaps in knowledge surrounding the environmental sustainability of CEA systems, and assesses whether these systems may allow for intensive and fully sustainable agriculture at a global scale. The energy requirements and subsequent carbon footprint of many systems is currently the greatest environmental hurdle to overcome. The lack of economically grown staple crops which make up the majority of calories consumed by humans is also a major limiting factor in the expansion of CEA systems to reduce the environmental impacts of food production at a global scale. This review introduces the concept of Integrated System CEA (ISCEA) in which multiple CEA systems can be deployed in an integrated localized fashion to increase efficiency and reduce environmental impacts of food production. We conclude that it is feasible that with sufficient green energy, that ISCEA systems could largely negate most forms of environmental damage associated with conventional farming at a global scale (e.g., GHGs, deforestation, nitrogen, phosphorus, pesticide use, etc.). However, while there is plenty of research being carried out into improving energy efficiency, renewable energy and crop diversification in CEA systems, the circular economy approach to waste is largely ignored. We recommend that industries begin to investigate how nutrient flows and efficiencies in systems can be better managed to improve the environmental performance of CEA systems of the future.