Bioavailability, Accumulation and Distribution of Toxic Metals (As, Cd, Ni and Pb) and Their Impact on Sinapis alba Plant Nutrient Metabolism

Metal(loid) contamination in Bangladesh: a comprehensive synthesis in different landscapes with ecological and health implications

Elevated metal(loid) concentrations in soil and foodstuffs is a significant global issue for many densely populated countries like Bangladesh, necessitating reliable estimation for sustainable management. Therefore, a comprehensive data synthesis from the published literature might help to provide a wholistic view of metal(loid) contamination in different areas in Bangladesh. This study provided a clearer view of metal(loid) contamination status and their associated ecological and health risks in different land use and ecosystems in Bangladesh. Comprehensive analyses were performed on data gathered from 143 published articles using multiple statistical techniques including meta-analysis. Considering the potential loading of metal(loid), the data were summarized under various groups, including coastal, rural, urban and industrial regions. Also, the concentrations of seven metal(loid)s, e.g., cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), zinc (Zn), and arsenic (As) in soil, sediment, cereal, vegetable, fruit, surface water and groundwater were included. Results showed that the relative concentrations of metal(loid)s in comparison to the maximum permissible limit (MPL) were mostly less than one, although they varied significantly for locations and individual metal(loid). However, the normalized cumulative relative concentrations over the MPL for all seven metal(loid)s across different environmental samples were 4.75, 2.97, 1.51 and 2.79 for coastal, industrial, rural and urban areas, respectively, which was due to the higher concentration of Cd, Cr and Cu. Similar to the metal(loid) concentrations, the average of cumulative median non-cancer risks for all metal(loid)s was in the order of industrial (6.46) > urban (4.05) > rural (3.83) > coastal (2.41). This research outcome will provide a foundation for future research on metal(loid)s and will help in pertinent policy-making by the relevant authorities in Bangladesh.

Transcriptomics, proteomics, and metabolomics interventions prompt crop improvement against metal(loid) toxicity

The escalating challenges posed by metal(loid) toxicity in agricultural ecosystems, exacerbated by rapid climate change and anthropogenic pressures, demand urgent attention. Soil contamination is a critical issue because it significantly impacts crop productivity. The widespread threat of metal(loid) toxicity can jeopardize global food security due to contaminated food supplies and pose environmental risks, contributing to soil and water pollution and thus impacting the whole ecosystem. In this context, plants have evolved complex mechanisms to combat metal(loid) stress. Amid the array of innovative approaches, omics, notably transcriptomics, proteomics, and metabolomics, have emerged as transformative tools, shedding light on the genes, proteins, and key metabolites involved in metal(loid) stress responses and tolerance mechanisms. These identified candidates hold promise for developing high-yielding crops with desirable agronomic traits. Computational biology tools like bioinformatics, biological databases, and analytical pipelines support these omics approaches by harnessing diverse information and facilitating the mapping of genotype-to-phenotype relationships under stress conditions. This review explores: (1) the multifaceted strategies that plants use to adapt to metal(loid) toxicity in their environment; (2) the latest findings in metal(loid)-mediated transcriptomics, proteomics, and metabolomics studies across various plant species; (3) the integration of omics data with artificial intelligence and high-throughput phenotyping; (4) the latest bioinformatics databases, tools and pipelines for single and/or multi-omics data integration; (5) the latest insights into stress adaptations and tolerance mechanisms for future outlooks; and (6) the capacity of omics advances for creating sustainable and resilient crop plants that can thrive in metal(loid)-contaminated environments.

Unlocking the potential of biochar in the remediation of soils contaminated with heavy metals for sustainable agriculture

Agricultural soils contaminated with heavy metals (HMs) impose a threat to the environmental and to human health. Amendment with biochar could be an eco-friendly and cost-effective option to decrease HMs in contaminated soil. This paper reviews the application of biochar as a soil amendment to immobilise HMs in contaminated soil. We discuss the technologies of its preparation, their specific properties, and effect on the bioavailability of HMs. Biochar stabilises HMs in contaminated soil, enhance the overall quality of the contaminated soil, and significantly reduce HM uptake by plants, making it an option in soil remediation for HM contamination. Biochar enhances the physical (e.g. bulk density, soil structure, water holding capacity), chemical (e.g. cation exchange capacity, pH, nutrient availability, ion exchange, complexes), and biological properties (e.g. microbial abundance, enzymatic activities) of contaminated soil. Biochar also enhances soil fertility, improves plant growth, and reduces the plant availability of HMs. Various field studies have shown that biochar application reduces the bioavailability of HMs from contaminated soil while increasing crop yield. The review highlights the positive effects of biochar by reducing HM bioavailability in contaminated soils. Future work is recommended to ensure that biochars offer a safe and sustainable solution to remediate soils contaminated with HMs.

Evaluation of the Phytoremediation Potential of the Sinapis alba Plant Using Extractable Metal Concentrations

Testing the feasibility of soil phytoremediation requires the development of models applicable on a large scale. Phytoremediation mechanisms include advanced rhizosphere biodegradation, phytoaccumulation, phytodegradation, and phytostabilization. The aim of this study was to evaluate the phytoremediation potential of the Sinapis alba. Identification of the factors influencing the extraction process of metals from contaminated soils in a laboratory system suitable for evaluating the phytoavailability of these metals in three solutions (M1-CaCl2, M2-DTPA, and M3-EDTA) included the following: distribution of metals in solution (Kd), soil properties and mobile fractions (SOC, CEC, pH), response surface methodology (RSM), and principal component analysis (PCA). The evaluation of the phytoremediation potential of the Sinapis alba plant was assessed using bioaccumulation coefficients (BACs). The accumulation of heavy metals in plants corresponds to the concentrations and soluble fractions of metals in the soil. Understanding the extractable metal fractions and the availability of metals in the soil is important for soil management. Extractable soluble fractions may be more advantageous in total metal content as a predictor of bioconcentrations of metals in plants. In this study, the amount of metal available in the most suitable extractors was used to predict the absorption of metals in the Sinapis alba plant. Multiple regression prediction models have been developed for estimating the amounts of As and Cd in plant organs. The performance of the predictive models generated based on the experimental data was evaluated by the adjusted coefficient of determination (aR2), model efficiency (RMSE), Durbin-Watson (DW) test, and Shapiro-Wilk (SW) test. The accumulation of the analyzed metals followed the pattern Root > Pods > Leaves > Seeds, stems > Flowers for As and Leaves > Root > Stem > Pods > Seeds > Flowers for Cd in soil contaminated with different metal concentrations. The obtained results showed a phytoremediation potential of the Sinapis alba plant.

The beneficial effects of bare and CMC-supported α-FeOOH, Fe3O4, and α-Fe2O3 nanoparticles on growth, nutrient content, and essential oil of summer savory (Satureja hortensis L.) under Cd, Pb and Zn stresses

This research studies the impacts of iron oxide nanoparticles (FeONPs) on alleviating the toxic effects of cadmium (Cd), lead (Pb), and zinc (Zn) on summer savory (Satureja hortensis L.). Different types of soil additives, including bare and carboxymethylcellulose (CMC)-supported hematite (α-Fe₂O₃), goethite (α-FeOOH), and magnetite (Fe₃O₄), were applied at three rates (0, 0.25, and 0.5% w/w) to a Cd, Pb, and Zn-contaminated soil sample. The experimental results showed that the application of FeONPs increased plant height, dry weights of shoot and root, and yield and content of essential oil. Bare and CMC-supported FeONPs increased the content of K, P, and Fe in the aerial parts of summer savory. However, these soil additives reduced the contents of Cd, Pb, and Zn in plant tissues. CMC-supported FeONPs proved to be more efficient additives in diminishing the toxic effects of Cd, Pb, and Zn in summer savory compared to their bare forms. Bare and CMC-supported goethite NPs were able to restrict the uptake of Cd, Pb, and Zn by summer savory roots in the metal-contaminated soil. The application of CMC-supported goethite at an application dose of 0.5% (w/w) increased shoot dry weight, shoot concentrations of K, P, and Fe, and yield of essential oil by about 62.6, 76.6, 77.1, 210, and 230%, respectively. Conversely, they reduced shoot concentrations of Cd, Pb, and Zn by about 64.6, 68.7, and 40.6%, respectively, compared to the control. These are significant results and indicate that CMC-supported goethite is likely to be the most effective soil additive in diminishing the toxicity of Cd, Pb, and Zn to metal-stressed summer savory.

Role of biochar-based free radicals in immobilization and speciation of metals in the contaminated soil-plant environment

The structure of biochar produced at various pyrolysis temperatures influences metal geochemical behavior. Here, the impact of wheat straw-derived biochar (300, 500, and 700 °C) on the immobilization and transformation of metals in the contaminated soil-plant system was assessed. The findings of the sequential extraction revealed that biochar additives had a substantial influence on the speciation of Cr, Ni, Pb, and Zn in the contaminated soil. The lowest F1 (exchangeable and soluble fraction) + F2 (carbonate fraction) accounted for Cr (44%) in WB-300, Ni (43.87%) in WB-500, Pb (43.79%), and Zn (49.78%) in WB-700 with applied amendments of their total amounts. The characterization results indicated that high pyrolysis temperatures (300-700 °C) increased the carbon-containing groups with the potential to adsorb metals from the soil-plant environment. The bioconcentration and translocation factors (BCF and TF) were less than 1, indicating that metal concentration was restricted to maize roots and translocation to shoots. Reactive oxygen species (ROS) intracellularly influence metal interactions with plants. Electron paramagnetic resonance (EPR) was performed to determine hydroxyl radical generation (•OH) in plant segments to assess the dominance of free radicals (FRs). Consequently, the formation of •OH significantly depends on the pyrolysis temperature and the interaction with a contaminated soil-plant environment. Thus, metal transformation can be effectively decreased in the soil-plant environment by applying WB amendments.

Assessing the health risk of cadmium to the local population through consumption of contaminated vegetables grown in municipal solid waste-amended soil

Pollution caused by municipal solid waste (MSW) is becoming a serious threat to the environment. Composting may be an effective way to speed up the decomposition of biodegradable components in MSW, resulting in compost that can be utilized as an organic fertilizer. The pot experiments were carried out with different soil-MSW mixtures (100:0, 75:25, 50:50, and 25:75; w/w) to determine the impact of MSW on the bioconcentration of Cd in commonly consumed plants of Sargodha. The possible health risks were evaluated by applying pollution indices, such as the pollution load index, bioconcentration factor, enrichment factor, and health risk index. The pollution load index was higher than 1 in 75% MSW-amended soil. However, the concentration of Cd was found to be below the permissible limits in all studied vegetables, with a range of 0.019-0.106 mg/kg. In the study, serum samples from different volunteers living in four sites in Sargodha were also collected and analyzed. For vegetable crops, the health risk index (HRI) was less than one. It is concluded that the concentration of Cd was increased by increasing the fraction of MSW. Although the metal contents in the soil treated with MSW were not high enough to categorize the soil as polluted, these findings show that the reuse of MSW can serve as an alternative to mineral fertilizers. However, the presence of Cd in MSW can have a direct impact on soil fertility and, if biomagnified, on crop production and human health.