Mitigating the Health Effects of Aqueous Cr(VI) with Iron-Modified Biochar

Silicone-modified black peanut shell (BPS) biochar adsorbents: Preparation and their adsorptions for copper(II) from water

Novel silicone-modified biochar adsorbents (BPS-MBCs) were prepared by utilizing waste black peanut shell (BPS) as a raw biochar and gamma-amino-propyl triethoxysilane (silicone) as an inorganic modifier. The novelty of this work is that the incorporation of silicone into BPS can rise the specific surface area and porosity of BPS-MBCs and elevate their adsorptions for copper (II). Sorption kinetics data for copper (II) were molded using five kinetic equations [i.e. Lagergren 1st-order and 2nd-order, intraparticle diffusion (IN-D), Elovich, and Diffusion-chemisorption]. The equilibrium adsorption data for copper (II) were analyzed using two-parameter isotherm equations [i.e. Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin] and three-parameter Sips, Redlich-Peterson and Toth isotherm models. It was validated that copper (II) sorption on BPS-MBCs matched better with pseudo-2nd-order kinetic, Diffusion-chemisorption and Langmuir isotherm models. The maximal qmLan of BPS-MBC-400 was near 284 mg/g at 45 °C. By multi-phase fitting of IN-D modelling, intra-particle diffusion coefficient (kin-d) and diffusion coefficient of external mass-transfer (DEx-Di) for copper (II) were calculated. The low sorption energy from Temkin and mean free energy from D-R modellings implied that copper (II) sorption was initiated by weak non-covalent bond interactions. Thermodynamic parameters indicated that copper (II) on BPS-MBCs was an endothermic and spontaneous process. Recycling of BPS-MBC-400 for copper (II) suggested it has excellent reusability. The major mechanism of copper (II) on BPS-MBCs is possibly comprised of multiple processes, such as physical adsorption (electrostatic attraction), chemical adsorption (adsorption from functional groups, chelation, and ion exchange) and diffusion-chemisorption. Based on these findings, it is expects that BPS-MBCs are promising sorbents for copper (II) eradication from Cu(II)-including wastewater.

Green low-cost synthesis of zero-valent iron nanoparticles from Palm Petiole Extract for Cr(VI) removal from water

One of the hottest research topics over the last decades was the valorization or/and recycling of agro-industrial wastes into different valuable liquid or solid products, which is considered a sustainable and low-cost approach. In this study, we developed zero-valent iron nanoparticles from Palm Petiole Extract (P-NZVI) using a green and straightforward approach. The as-synthesized P-NZVI was used to adsorb Cr(VI) in water. The physico-chemical characterizations of P-NZVI, including the particle size, crystalline structure, surface area, morphology, and functional groups, were investigated via several techniques such as UV-vis spectroscopy, SEM, TEM, XRD, FTIR, AFM, DLS, pHZPC measurement, and BET analysis. The adsorption performance of P-NZVI was studied under different operational parameters, including pollutant concentration, pH, temperature, and adsorbent mass. The adsorption rate was found to be 89.3% within 40 min, corresponding to the adsorption capacity of 44.47 mg/g under the following conditions: initial Cr(VI) concentration of 40 mg/L, pH 5, and a P-NZVI dosage of 1 g/L. It was found that the adsorption pattern follows the Langmuir and the pseudo-second-order kinetic models, indicating a combination of monolayer adsorption and chemisorption mechanisms. The thermodynamic study shows that the adsorption process is endothermic and spontaneous. The reusability of P-NZVI was carried out four times, showing a slight decrease from 89.3 to 87%. These findings highlight that P-NZVI's could be an effective green adsorbent for removing Cr(VI) or other types of toxic pollutants from water.

Competitive adsorption of sulfamethoxazole and bisphenol A on magnetic biochar: Mechanism and site energy distribution

Competitive adsorption and complementary adsorption between emerging pollutants has been observed in multiple studies. Investigation of the preference of pollutants for different types of adsorption sites can provide a supplementary perspective for understanding complementary adsorption. In this study, the simultaneous adsorption of two typical emerging pollutants, sulfamethoxazole (SMX) and bisphenol A (BPA), on magnetic biochar (MBC-1) was investigated. The results showed that the modification with ferric chloride optimized the surface properties of biochar (aromaticity, hydrophobicity, and oxygen-containing functional groups, etc.), and helped to remove SMX and BPA through various interactions. The equilibrium adsorption capacity of the two adsorbents was inhibited by competitive adsorption in the mixed solute systems, which was due to the same adsorption mechanism. When pH = 7, the SMX and BPA adsorption mainly involved pore filling, hydrophobic effect, π-π EDA, and hydrogen bonding. In addition, electrostatic force, surface coordination, and ion exchange have also been proven to be related to the adsorption of SMX and BPA. In the co-adsorption system, BPA's competitive advantage might be due to its superior hydrophobicity, charge property, and molecular diameter. In the competitive adsorption experiment, the total adsorption capacity (Q_i) of the competitive solute exceeded the adsorption inhibition (△Q_i) of the main solute, indicating that the two solutes occupied their preferred adsorption sites, which confirmed the complementary adsorption phenomenon. Complementary adsorption can be explained by the preference of SMX and BPA for different types of adsorption sites. BPA preferentially occupied high-energy sites in the co-adsorption system, such as π-π EDA interaction, ion exchange, and surface coordination. At the same time, SMX tended to be removed by hydrophobic interaction and hydrogen bonding.

Chromium-Modified Heterogeneous Bipolar Membrane: Structure, Characteristics, and Practical Application in Electrodialysis

The modification of an MB-2 bipolar ion exchange membrane with chromium (III) hydroxide was carried out by a chemical method, namely, by the sequential treatment of the membrane with a solution of chromium (III) salt and alkali. Data on the morphology, phase, and chemical composition of the modified membrane were obtained using scanning electron microscopy and energy-dispersive analysis. In particular, it was shown that the modifier was distributed in a layer 30-50 microns thick at the boundary of the cation- and anion-exchange layers of the bipolar membrane. The electrochemical behavior of the modified membrane in the process of sodium sulfate conversion was studied by measurements of the following characteristics: the current efficiency of the acid and base, the energy consumption of the process, and the degree of contamination of the target products with salt ions. It was shown that the resulting membrane has an alkali and acid yield of 61% and 57%, respectively. This is higher than the same yields for the industrial unmodified MB-2 membrane (38% and 30%). The results of this study demonstrated that the modified samples allowed obtaining a higher yield of acid and base, reducing the content of salt ions in the target products and also reducing the electricity consumption for obtaining a unit of the target product. The concentration dependences of the electrical conductivity of the MK-40 heterogeneous ion-exchange membrane, which is a cation-exchange layer of MB-2, in sodium sulfate solutions before and after its modification with chromium (III) oxide were obtained. A decrease in the specific electrical conductivity of the membrane with the introduction of a modifier was established. A quantitative assessment of the influence of the modifier on the current flow, volume fraction, and spatial orientation of the conductive phases of MK-40 was carried out using an extended three-wire model for the description of the model parameters of ion-exchange materials. When a modifying additive was introduced into MK-40, the fraction of the current passing through the inner solution and the intergel phase decreased. This was due to the substitution of part of the free solution in the pore volume by the modifier. A variant of the practical application of electrodialysis with the chromium-modified bipolar ion-exchange membranes is recommended.

Chemical modification of biochars as a method to improve its surface properties and efficiency in removing xenobiotics from aqueous media

Biochar (BC) is a carbonaceous material produced by pyrolysis of biomass, applied in various areas such as water purification, fuel production, soil amendment, etc. Many types of BC are characterized by insufficient textural parameters or poor surface chemistry, and hence by low adsorption capacity. This makes innovative chemical methods increasing BC ability to remove xenobiotics from aquatic environments highly needed. Many of them have already been described in the literature. This review presents them in detail and evaluates their effectiveness in improving textural parameters, surface chemistry, and adsorption capacity of BC.