The effect of fiber bleaching treatment on the properties of poly(lactic acid)/oil palm empty fruit bunch fiber composites

Recent developments in sugarcane bagasse fibre-based adsorbent and their potential industrial applications: A review

In recent years, there has been an increase in research devoted to the advancement of cellulose and nanocellulose-based materials, which are advantageous due to their renewable nature, strength, rigidity, and environmental friendliness. This exploration complies with the fundamental tenets of environmental stewardship and sustainability. An area of industrial biotechnology where cellulosic agricultural residues have the potential to be economically utilized is through the conversion of such residues; sugarcane bagasse is currently leading this charge. SCB, a plentiful fibrous byproduct produced during the sugarcane industry's operations, has historically been utilized in various sectors, including producing paper, animal feed, enzymes, biofuel conversion, and biomedical applications. Significantly, SCB comprises a considerable amount of cellulose, approximately 40 % to 50 %, rendering it a valuable source of cellulose fibre for fabricating cellulose nanocrystals. This review sheds light on the significant advances in surface modification techniques, encompassing physical, chemical, and biological treatments, that enhance sugarcane bagasse fibres' adsorption capacity and selectivity. Furthermore, the paper investigates the specific advancements related to the augmentation of sugarcane bagasse fibres' efficacy in adsorbing a wide range of pollutants. These pollutants span a spectrum that includes heavy metals, dyes, organic pollutants, and emerging contaminants. The discussion provides a comprehensive overview of the targeted removal processes facilitated by applying modified fibres. The unique structural and chemical properties inherent in sugarcane bagasse fibres and their widespread availability position them as highly suitable adsorbents for various pollutants. This convergence of attributes underscores the potential of sugarcane bagasse fibres in addressing environmental challenges and promoting sustainable solutions across multiple industries.

Production of natural cellulose-based microfibres, from oil palm mesocarp fibres and pineapple leaf wastes, as porous supports for further applications

Natural cellulose-based microfibers were obtained through an economical and environmentally sustainable process called alkaline-peroxide purification, from the waste products of oil palm mesocarp fibres (OPMF) and pineapple leaves (PL), with the intention of creating porous, biodegradable, biocompatible, and non-toxic solid supports for use in future processes. The extracted microfibres were then taken through microscopic, spectroscopic and thermal characterisation to establish their cellulosic nature. The scanning electron microscopic (SEM) images of the bleached microfibres (B-OPMF and B-PLF) were cleaner, smoother and porous as compared with that of the unrefined fibres (Ur-OPMF and Ur-PLF). The bleached fibres (B-OPMF and B-PLF) exhibited peaks of C and O, which are indicative of pure cellulose, in the energy-dispersive X-ray spectroscopy (EDS) analysis. The FTIR spectral analysis of the extracted cellulose-based fibres (B-OPMF and B-PLF) exhibited peaks that were similar in composition to the reference cellulose (P-GB). For the thermogravimetric analysis (TGA) analysis, the maximum weight degradation in the reference cellulose (P-GB), occurred at 363.11 °C, in the bleached palm fibres (B-OPMF) at 334.55 °C and in the bleached pineapple leaf fibres (B-PLF) at 375.68 °C which, corresponds to cellulose decomposition. The differential scanning calorimetry (DSC) test verified the microfibers' thermally induced transitions. Therefore, these cellulose-based microfibres could be applied as functionalised microfibre supports for future applications.

Biocomposites of Poly(Lactic Acid) and Microcrystalline Cellulose: Influence of the Coupling Agent on Thermomechanical and Absorption Characteristics

In this study, poly(lactic acid) (PLA) and microcrystalline cellulose (MCC)-based green biocomposites were developed using a solution casting technique. Essentially, the bonding between PLA and MCC is quite feeble; therefore, the current study is conducted to strengthen the bonding by incorporating a coupling agent, thereby enhancing the overall quality of the biocomposites. Thus, the present study aimed to examine the influence of combined coupling agents-maleic anhydride (MAH) and maleic acid (MA) (MAH-MA)-on the properties of polylactic acid (PLA)/microcrystalline cellulose (MCC) biocomposites. The investigation also encompassed an examination of the impact of MCC loading (2, 3, and 5% w/w) into a PLA matrix. The Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) examination revealed the interfacial interaction and adhesion among MCC, PLA, and coupling agents and the formation of biocomposites. The incorporation of MAH-MA led to improved mechanical properties of the PLA/MCC biocomposites. Furthermore, the incorporation of MAH-MA into the PLA/3 wt % MCC composite exhibited enhancements in both the tensile strength and tensile modulus, accompanied by a reduced elongation at break. In addition, it is worth noting that the thermogravimetric analysis (TGA) curve of the PLA composite with 3% w/w of MCC and MAH-MA displayed a significant decrease in weight beyond a temperature threshold of 492.65 °C. The water absorption demonstrates that the incorporation of MAH-MA into the PLA/MCC composite led to advantageous water barrier characteristics. The observed improvements were attributed to the efficient dispersion of MCC at the most favorable amount of coupling agents, along with the chemical interactions involving grafting and esterification between MCC and the MAH-MA coupling agent. Furthermore, the incorporation of MAH-MA into the PLA/3% (w/w) MCC composite exhibited enhancements in both the tensile strength and tensile modulus, accompanied by a reduction in the elongation percentage at break. The experimental results about water absorption demonstrate that the incorporation of MAH-MA into the PLA/MCC composite led to advantageous water barrier characteristics. These improvements were attributed to good MCC dispersion and the chemical interactions involving grafting and esterification between the MCC and the MAH-MA coupling agent.

The Effect of Various Environmental Conditions on the Impact Damage Behaviour of Natural-Fibre-Reinforced Composites (NFRCs)-A Critical Review

Studies into environmental conditions and their effects on the properties of renewable materials are gaining significant attention in the research field, particularly for natural fibres and their resultant composites. However, natural fibres are prone to water absorption because of the hydrophilic nature of the fibres, which affects the overall mechanical properties of natural-fibre-reinforced composites (NFRCs). In addition, NFRCs are based mainly on thermoplastic and thermosetting matrices, which could be used in automobile and aerospace components as lightweight materials. Therefore, such components have to survive the maximum temperature and humid conditions in different parts of the world. Based on the above factors, through an up-to-date review, this paper critically discusses the effects of environmental conditions on the impact performance of NFRCs. In addition, this paper critically assesses the damage mechanisms of NFRCs and their hybrids by focusing more on moisture ingress and relative humidity in the impact damage behaviour of NFRCs.

Synergistic modification of polylactic acid by oxidized straw fibers and degradable elastomers: A green composite with good strength and toughness

Polylactic acid-based (PLA) composites are widely used in biomedicine, electrical components, food packaging and other fields, but their unsatisfactory mechanical properties such as high brittleness and poor toughness, cause problems in functional applications. This work developed a green and environmentally friendly strategy to improve PLA mechanical properties. Flexible polybutylene succinate (PBS) and alkaline hydrogen peroxide (AHP) treated straw fibers (SF) synergistically modified PLA. AHP is decomposed into a large amount of HOO-, which oxidizes the hydroxyl groups in SF to carboxyl groups to obtain oxidized straw fiber (OSF), which reacts with PLA in the molten state to form new ester bonds. The tensile strength of the OSF/PLA composite is 41.78 MPa, 38 % higher than the SF/PLA composite. The impact toughness of OSF/PBS/PLA composite is 14.47 KJ/m² increased by 54 % after the adding PBS, while the tensile strength was also better than the control group. The synergistic action of PLA and PBS in OSF is attributed to the formation of new chemical bonds, efficient crystallization, and compatible interface. This study provides a new strategy to produce fiber-reinforced PLA composites with good toughness. It takes positive significance for developing degradable plastics with good performance and controllable cost.

Isolation and Characterization of Natural Cellulose from Oxytenanthera abyssinica (Lowland Ethiopian Bamboo) Using Alkali Peroxide Bleaching Stages Followed by Aqueous Chlorite in Buffer Solution

Plants are the primary sources of cellulose. This paper is aimed at isolating cellulose from Oxytenanthera abyssinica via chemical treatments. The thermal behavior, functional group, chemical composition, crystallinity, and morphology of raw (ROA), dewaxed (DOA), alkali-treated (AOA), and bleached (BOA) fibers were examined. TGA, FTIR, DSC, DTA, XRD, and SEM were used for characterization techniques. The effects of chemical treatments were examined by determining the content of cellulose, hemicellulose, lignin, and ash. The cellulose content in the ROA improved from $49.26\pm 0.13$  wt% to $86.01\pm 0.02$  wt% due to the removal of noncellulose components using waxing, alkali treatment, and bleaching with alkali peroxide bleaching stages followed by aqueous chlorite in buffer solution. The highest content of cellulose and holocellulose was exhibited in the BOA samples with a yield of $86.01\pm 0.02$  wt% and $97.61\pm 0.17$  wt%, respectively. ROA had greater hemicellulose ( $21.31\pm 0.15$  wt%), lignin ( $20.63\pm 0.12$  wt%), and ash content ( $3.30\pm 0.11$  wt%) in comparison to AOA and BOA. The XRD data showed a change in crystallinity after each treatment. Because of the high amount of crystalline cellulose, the XRD results revealed that BOA has a higher crystallinity index (CrI) (59.89%) and peak intensity than AOA, DOA, and ROA. The strength of the FTIR peaks increased in the order of ROA, DOA, AOA, and BOA, indicating that pretreatment causes hemicellulose and lignin to be gradually removed from the Oxytenanthera abyssinica fiber. The TGA, DTG, DTA, and DSC data also confirmed that BOA has the highest thermal stability due to the high content of cellulose. The SEM analysis showed a morphological change in the surface due to chemical treatment. These results confirmed that through chemical pretreatment, a high amount of cellulose was produced from Oxytenanthera abyssinica. Even though Oxytenanthera abyssinica is commonly grown in Ethiopia, few studies have been done on it, and no works have been carried out to isolate and characterize cellulose from the plant. Thus, the findings in this work will encourage researchers to use Oxytenanthera abyssinica as a source of cellulose for various applications, including the manufacture of cellulose nanocrystals, polymer matrix biofilters, green biocomposite reinforcing agents, and hydrogel synthesis.

Thermal Stability, Dynamic Mechanical Analysis and Flammability Properties of Woven Kenaf/Polyester-Reinforced Polylactic Acid Hybrid Laminated Composites

This paper presents the thermal and flammability properties of woven kenaf/polyester-reinforced polylactic acid hybrid laminated composites. The effects of the fiber content and stacking sequences of hybrid composites were examined. The hybrid composites were fabricated using the hot press method. Thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and flammability properties of woven kenaf/polyester-reinforced polylactic hybrid composites were reported. The thermal results have demonstrated the effect of the hybridization of the composites on the thermal stability and viscoelastic properties of the laminates. The work also measured the burning rate of the hybrid composites during the flammability test. The S7 sample that consisted of all woven kenaf layers in composite recorded the highest char residue of 10%, and the S8 sample displayed the highest decomposition temperature among all samples. However, as for hybrid composites, the S5 sample shows the optimum result with a high char yield and exhibited the lowest burning rate at 29 mm/min. The S5 sample also shows the optimum viscoelastic properties such as storage and loss modulus among hybrid composites.

Structural characterization of microcrystalline and nanocrystalline cellulose from Ananas comosus L. leaves: Cytocompatibility and molecular docking studies

The present study focused on the preparation of microcrystalline cellulose (MCC) and nanocrystalline cellulose (NCC) from pineapple (Ananas comosus L.) leaves using chemical treatments followed by acid hydrolysis. Pineapple leaves could be used in medical applications such as drug delivery carriers. Advanced spectroscopy techniques such as Fourier-transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to analyze the physical, chemical, and morphological features of the isolated MCC and NCC; the results indicated the needle-shaped form of nanostructures with good purity and high crystallinity index of 75.00 and 76.38%, respectively. In addition, inhibition of the treated MRC-5 cells with all the samples revealed that the percentage of cell viability was less than 30%, which is an interesting finding given their role in the cytotoxicity effect of MCC and NCC. It appears that MCC and NCC derived from pineapple leaves have lower toxicity. As a result, the developed MCC and NCC can be used in pharmaceutical applications as a novel drug delivery system. Molecular docking was performed to understand the non-bonding interaction of cellulose with human acid-beta-glucosidase (β-Glc) (PDB: 1OGS). The docking result shows that cellulose unit docked within the active pocket of the enzyme by forming hydrogen bonds against ASN19, THR21, and VAL17 with distances of 2.18, 1.93, and 2.92 Å, respectively, with binding energy (−5.0 kcal/mol) resulting in close interaction of cellulose unit with the receptor.

Biocomposites of Epoxidized Natural Rubber/Poly(Lactic Acid) Modified with Natural Substances: Influence of Biomolecules on the Aging Properties (Part II)

The aim of this study is to present the possible influence of natural substances on the aging properties of epoxidized natural rubber (ENR) and poly(lactic acid) (PLA) eco-friendly elastic blends. Therefore, the ENR/PLA blends were filled with natural pro-health substances of potentially antioxidative behavior, namely, δ-tocopherol (vitamin E), curcumin, β-carotene and quercetin. In this way, the material biodeterioration potential was maintained and the material’s lifespan was prolonged while subjected to increased temperatures or high-energy UVA irradiation (340 nm). The investigation of the samples’ properties indicated that curcumin and quercetin are the most promising natural additives that may contribute to the delay of ENR/PLA degradation under the above-mentioned conditions. The efficiency of the proposed new natural anti-aging additives was proven with static mechanical analysis, color change investigation, as well as mass loss during a certain aging. The aging coefficient, which compares the mechanical properties before and after the aging process, indicated that the ENR/PLA performance after 200 h of accelerated aging might decrease only by approximately 30% with the blend loaded with quercetin. This finding paves new opportunities for bio-based and green anti-aging systems employed in polymer technology.

Biocomposites of Epoxidized Natural Rubber/Poly(lactic acid) Modified with Natural Fillers (Part I)

The study aimed to prepare sustainable and degradable elastic blends of epoxidized natural rubber (ENR) with poly(lactic acid) (PLA) that were reinforced with flax fiber (FF) and montmorillonite (MMT), simultaneously filling the gap in the literature regarding the PLA-containing polymer blends filled with natural additives. The performed study reveals that FF incorporation into ENR/PLA blend may cause a significant improvement in tensile strength from (10 ± 1) MPa for the reference material to (19 ± 2) MPa for the fibers-filled blend. Additionally, it was found that MMT employment in the role of the filler might contribute to ENR/PLA plasticization and considerably promote the blend elongation up to 600%. This proves the successful creation of the unique and eco-friendly PLA-containing polymer blend exhibiting high elasticity. Moreover, thanks to the performed accelerated thermo-oxidative and ultraviolet (UV) aging, it was established that MMT incorporation may delay the degradation of ENR/PLA blends under the abovementioned conditions. Additionally, mold tests revealed that plant-derived fiber addition might highly enhance the ENR/PLA blend’s biodeterioration potential enabling faster and more efficient growth of microorganisms. Therefore, materials presented in this research may become competitive and eco-friendly alternatives to commonly utilized petro-based polymeric products.

The Effect of Jackfruit Skin Powder and Fiber Bleaching Treatment in PLA Composites with Incorporation of Thymol

Food packaging has seen a growth in the use of materials derived from renewable resources such as poly(lactic acid) (PLA). However, the initial costs to produce bioplastics are typically high. Tropical fruit waste as naturally sourced fibres, such as jackfruit skin, can be used as a cost-reducing filler for PLA. The main objective in this study is to fabricate a low-cost natural fibre-reinforced polymer that potentially applies in packaging with the aid of bleaching treatment. The treatment shows a rougher surface fibre in Scanning electron microscopy (SEM) micrographs and it is expected to have better mechanical locking with the matrix, and this is found similar with a Fourier-transform infrared spectroscopy (FTIR) analysis. Unfortunately, fibre insertion does find low tensile performances, yet bleached-fibre composites improved its performance significantly. A similar situation was found in the thermal characterization where a low-thermal stability natural fibre composite has lower thermal behaviour and this increased with bleaching treatment. Besides, bleached-fibre composites have a longer service period. Besides, a 15 wt% thymol insertion inhibits the growth of Gram-positive bacteria in the composites and the non-treated fibre composite has better thymol effects. The 30 wt% of the bleached-fibre insertion composite has a high potential to reduce the cost of bioplastic products with minimum alterations of overall performances.

Thermal and Structural Analysis of Epoxidized Jatropha Oil and Alkaline Treated Kenaf Fiber Reinforced Poly(Lactic Acid) Biocomposites

New environmentally friendly plasticized poly(lactic acid) (PLA) kenaf biocomposites were obtained through a melt blending process from a combination of epoxidized jatropha oil, a type of nonedible vegetable oil material, and renewable plasticizer. The main objective of this study is to investigate the effect of the incorporation of epoxidized jatropha oil (EJO) as a plasticizer and alkaline treatment of kenaf fiber on the thermal properties of PLA/Kenaf/EJO biocomposites. Kenaf fiber was treated with 6% sodium hydroxide (NaOH) solution for 4 h. The thermal properties of the biocomposites were analyzed using a differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). It must be highlighted that the addition of EJO resulted in a decrease of glass transition temperature which aided PLA chain mobility in the blend as predicted. TGA demonstrated that the presence of treated kenaf fiber together with EJO in the blends reduced the rate of decomposition of PLA and enhanced the thermal stability of the blend. The treatment showed a rougher surface fiber in scanning electron microscopy (SEM) micrographs and had a greater mechanical locking with matrix, and this was further supported with Fourier-transform infrared spectroscopy (FTIR) analysis. Overall, the increasing content of EJO as a plasticizer has improved the thermal properties of PLA/Kenaf/EJO biocomposites.

Preparation and Characterization of Semi-Flexible Substrates from Natural Fiber/Nickel Oxide/Polycaprolactone Composite for Microstrip Patch Antenna Circuitries for Microwave Applications

The study intended to utilizing waste organic fiber for low-cost semi-flexible substrate fabrication to develop microstrip patch antennas for low band communication applications. All the semi-flexible substrates (12.2 wt. % OPEFF/87.8 wt. % PCL, 12.2 wt. % NiO/87.8 wt. % PCL, and 25 wt. % OPEFF/25 wt. % NiO/50 wt. % PCL) were fabricated by oil palm empty fruit fiber (OPEFF) mixed with nickel oxide (NiO) nanoparticles reinforced with polycaprolactone (PCL) as a matrix using a Thermo Haake blending machine. The morphology and crystalized structure of the substrates were tested using Fourier transform infrared (FTIR) spectrometry, X-ray diffraction (X-RD) technique, and scanning electron microscopy (SEM), respectively. The thermal stability behavior of the substrates was analyzed using thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) thermogram. The dielectric properties were characterized by an open-ended coaxial probe (OEC) connected with Agilent N5230A PNA-L Network Analyzer included the 85070E2 dielectric software at frequency range of 8 to 12 GHz. The experimental results showed that NiO/OPEFF/PCL composites exhibit controllable permittivity dielectric constant εr′(f) between 1.89 and 4.2 (Farad/meter, (F/m)), with loss factor εr′′(f) between 0.08 and 0.62 F/m, and loss tangent (tan δ) between 0.05 and 0.18. Return losses measurement of the three patch antennas OPEFF/PCL, NiO/PCL, and OPEFF/NiO/PCL are −11.93, −14.2 and −16.3 dB respectively. Finally, the commercial software package, Computer Simulation Technology Microwave Studio (CSTMWS), was used to investigate the antenna performance by simulate S-parameters based on the measured dielectric parameters. A negligible difference is found between the measured and simulated results. Finally, the results obtained encourage the possibility of using natural fibers and nickel oxide in preparation of the substrates utilize at microwave applications.

Physical Properties of Carboxymethyl Cellulose from Palm Bunch and Bagasse Agricultural Wastes: Effect of Delignification with Hydrogen Peroxide

The aim of this work was to synthesize carboxymethyl cellulose (CMC) and produce CMC films from the cellulose of palm bunch and bagasse agricultural waste. The effect of various amounts of H₂O₂ (0-40% v/v) during delignification on the properties of cellulose, CMC, and CMC films was studied. As the H₂O₂ content increased, yield and the lignin content of the cellulose from palm bunch and bagasse decreased, whereas lightness (L*) and whiteness index (WI) increased. FTIR confirmed the substitution of a carboxymethyl group on the cellulose structure. A higher degree of substitution of CMC from both sources was found when 20%-30% H₂O₂ was employed. The trend in the L* and WI values of each CMC and CMC film was related to those values in their respective cellulose. Bleaching each cellulose with 20% H₂O₂ provided the cellulose with the highest viscosity and the CMC films with the greatest mechanical (higher tensile strength and elongation at break) and soluble attributes, but the lowest water vapor barrier. This evidence indicates that cellulose delignification with H₂O₂ has a strong effect on the appearance and physical properties of both CMCs.

Effect of Superheated Steam Treatment on the Mechanical Properties and Dimensional Stability of PALF/PLA Biocomposite

The effectiveness of superheated steam (SHS) as an alternative, eco-friendly treatment method to modify the surface of pineapple leaf fiber (PALF) for biocomposite applications was investigated. The aim of this treatment was to improve the interfacial adhesion between the fiber and the polymer. The treatment was carried out in an SHS oven for different temperatures (190–230 °C) and times (30–120 min). Biocomposites fabricated from SHS-treated PALFs and polylactic acid (PLA) at a weight ratio of 30:70 were prepared via melt-blending techniques. The mechanical properties, dimensional stability, scanning electron microscopy (SEM), and X-ray diffraction (XRD) for the biocomposites were evaluated. Results showed that treatment at temperature of 220 °C for 60 min gave the optimum tensile properties compared to other treatment temperatures. The tensile, flexural, and impact properties as well as the dimensional stability of the biocomposites were enhanced by the presence of SHS-treated PALF. The SEM analysis showed improvement in the interfacial adhesion between PLA and SHS-treated PALF. XRD analysis showed an increase in the crystallinity with the addition of SHS-PALF. The results suggest that SHS can be used as an environmentally friendly treatment method for the modification of PALF in biocomposite production.

Extraction and Characterization of Cellulose Nanocrystals from Tea Leaf Waste Fibers

The aim was to explore the utilization of tea leaf waste fibers (TLWF) as a source for the production of cellulose nanocrystals (CNC). TLWF was first treated with alkaline, followed by bleaching before being hydrolyzed with concentrated sulfuric acid. The materials attained after each step of chemical treatments were characterized and their chemical compositions were studied. The structure analysis was examined by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). From FTIR analysis, two peaks at 1716 and 1207 cm-1-which represent C=O stretching and C⁻O stretching, respectively-disappeared in the spectra after the alkaline and bleaching treatments indicated that hemicellulose and lignin were almost entirely discarded from the fiber. The surface morphology of TLWF before and after chemical treatments was investigated by scanning electron microscopy (SEM) while the dimension of CNC was determined by transmission electron microscopy (TEM). The extraction of CNC increased the surface roughness and the crystallinity index of fiber from 41.5% to 83.1%. Morphological characterization from TEM revealed the appearance of needle-like shaped CNCs with average diameter of 7.97 nm. The promising results from all the analyses justify TLWF as a principal source of natural materials which can produce CNC.

Editorial: biodegradable materials

This Special Issue “Biodegradable Materials” features research and review papers concerning recent advances on the development, synthesis, testing and characterisation of biomaterials. These biomaterials, derived from natural and renewable sources, offer a potential alternative to existing non-biodegradable materials with application to the food and biomedical industries amongst many others. In this Special Issue, the work is expanded to include the combined use of fillers that can enhance the properties of biomaterials prepared as films. The future application of these biomaterials could have an impact not only at the economic level, but also for the improvement of the environment.