Differential Susceptibility of Catheter Biomaterials to Biofilm-Associated Infections and Their Remedy by Drug-Encapsulated Eudragit RL100 Nanoparticles

In vitro and in vivo assessment of curcumin-quercetin loaded multi-layered 3D-nanofibroporous matrix prepared by solution blow-spinning for full-thickness burn wound healing

Burn wounds (BWs) cause impairment of native skin tissue and may cause significant microbial infections that demand immediate care. Curcumin (Cur) and quercetin (Que) exhibit antimicrobial, hemocompatibility, ROS-scavenging, and anti-inflammatory properties. However, its instability, water insolubility, and low biological fluid absorption render it challenging to sustain local Cur and Que doses at the wound site. Therefore, to combat these limitations, we employed blow-spinning and freeze-drying to develop a multi-layered, Cur/Que-loaded gelatin/chitosan/PCL (GCP-Q/C) nanofibroporous (NFP) matrix. Morphological analysis of the NFP-matrix using SEM revealed a well-formed multi-layered structure. The FTIR and XRD plots demonstrated dual-bioactive incorporation and scaffold polymer interaction. Additionally, the GCP-Q/C matrix displayed high porosity (82.7 ± 2.07 %), adequate pore size (∼121 μm), enhanced water-uptake ability (∼675 % within 24 h), and satisfactory biodegradation. The scaffolds with bioactives had a long-term release, increased antioxidant activity, and were more effective against gram-positive (S. aureus) and gram-negative (E. coli) bacteria than the unloaded scaffolds. The in vitro findings of GCP-Q/C scaffolds showed promoted L929 cell growth and hemocompatibility. Additionally, an in vivo full-thickness BW investigation found that an implanted GCP-Q/C matrix stimulates rapid recuperation and tissue regeneration. In accordance with the findings, the Gel/Ch/PCL-Que/Cur NFP-matrix could represent an effective wound-healing dressing for BWs.

Mesh and layered electrospun fiber architectures as vehicles for Lactobacillus acidophilus and Lactobacillus crispatus intended for vaginal delivery

Bacterial vaginosis (BV) is a recurrent condition that affects millions of women worldwide. The use of probiotics is a promising alternative or an adjunct to traditional antibiotics for BV prevention and treatment. However, current administration regimens often require daily administration, thus contributing to low user adherence and recurrence. Here, electrospun fibers were designed to separately incorporate and sustain two lactic acid producing model organisms, Lactobacillus crispatus (L. crispatus) and Lactobacillus acidophilus (L. acidophilus). Fibers were made of polyethylene oxide and polylactic-co-glycolic acid in two different architectures, one with distinct layers and the other with co-spun components. Degradation of mesh and layered fibers was evaluated via mass loss and scanning electron microscopy. The results show that after 48 h and 6 days, cultures of mesh and layered fibers yielded as much as 108 and 109 CFU probiotic/mg fiber in total, respectively, with corresponding daily recovery on the order of 108 CFU/(mg·day). In addition, cultures of the fibers yielded lactic acid and caused a significant reduction in pH, indicating a high level of metabolic activity. The formulations did not affect vaginal keratinocyte viability or cell membrane integrity in vitro. Finally, mesh and layered probiotic fiber dosage forms demonstrated inhibition of Gardnerella, one of the most prevalent and abundant bacteria associated with BV, respectively resulting in 8- and 6.5-log decreases in Gardnerella viability in vitro after 24 h. This study provides initial proof of concept that mesh and layered electrospun fiber architectures developed as dissolving films may offer a viable alternative to daily probiotic administration.

Microbial Biofilm: A Review on Formation, Infection, Antibiotic Resistance, Control Measures, and Innovative Treatment

Biofilm is complex and consists of bacterial colonies that reside in an exopolysaccharide matrix that attaches to foreign surfaces in a living organism. Biofilm frequently leads to nosocomial, chronic infections in clinical settings. Since the bacteria in the biofilm have developed antibiotic resistance, using antibiotics alone to treat infections brought on by biofilm is ineffective. This review provides a succinct summary of the theories behind the composition of, formation of, and drug-resistant infections attributed to biofilm and cutting-edge curative approaches to counteract and treat biofilm. The high frequency of medical device-induced infections due to biofilm warrants the application of innovative technologies to manage the complexities presented by biofilm.

In silico molecular modelling studies and antibiofilm efficacy of shikonin against Candida albicans: mechanistic insight

In the recent past, the occurrence of fungal infections has increased drastically and candidiasis, caused prominently by Candida albicans, is foremost among them which has caused significant mortality and morbidity majorly in immune-compromised patients. Shikonin is a well-known natural naphthazarin derivative with promising antifungal efficacy, but it's mechanism of action is still unclear. Keeping this in view, present work was designed to get a mechanistic insight of anti-candida efficacy of shikonin via in vitro experiments and in situ molecular modelling studies. The current exploratory study is based on research that uses both qualitative and quantitative techniques, including minimum inhibitory concentration, minimum biofilm inhibitory concentration, time kill assay, cell cycle analysis and apoptotic assays, static biofilm formation assays, microscopic biofilm assessment assays, ergosterol content estimation and molecular docking/simulation studies. The study revealed a notable effect of shikonin against Candida albicans, including retardation of biofilms. Shikonin, with its increasing concentration leads to candidal cell apoptosis and necrosis establishing its dose-dependent effect. Additionally, it exhibited fungicidal activity via a mechanism of action likely related to ergosterol complexation which was further corroborated by molecular docking and simulation studies.

Deficiency of Integrin β4 Results in Increased Lung Tissue Stiffness and Responds to Substrate Stiffness via Modulating RhoA Activity

The interaction between extracellular matrix (ECM) and epithelial cells plays a key role in lung development. Our studies found that mice with conditional integrin β4 (ITGB4) knockout presented lung dysplasia and increased stiffness of lung tissues. In accordance with our previous studies regarding the functions of ITGB4 in bronchial epithelial cells (BECs), we hypothesize that the decreased ITGB4 expression during embryonic stage leads to abnormal ECM remodeling and increased tissue stiffness, thus impairing BECs motility and compromising lung development. In this study, we examined lung tissue stiffness in normal and ITGB4 deficiency mice using Atomic Force Microscopy (AFM), and demonstrated that ITGB4 deficiency resulted in increased lung tissue stiffness. The examination of ECM components collagen, elastin, and lysyl oxidase (LOX) family showed that the expression of type VI collagen, elastin and LOXL4 were significantly elevated in the ITGB4-deficiency mice, compared with those in normal groups. Airway epithelial cell migration and proliferation capacities on normal and stiff substrates were evaluated through video-microscopy and flow cytometry. The morphology of the cytoskeleton was detected by laser confocal microscopy, and RhoA activities were determined by fluorescence resonance energy transfer (FRET) microscopy. The results showed that migration and proliferation of ITGB4 deficiency cells were noticeably inhibited, along decreased cytoskeleton stabilization, and hampered RhoA activity, especially for cells cultured on the stiff substrate. These results suggest that decreased ITGB4 expression results in increased lung tissue stiffness and impairs the adaptation of bronchial epithelial cells to substrate stiffness, which may be related to the occurrence of broncho pulmonary dysplasia.

Nanoparticles approach to eradicate bacterial biofilm-related infections: A critical review

Biofilm represents one of the crucial factors for the emergence of multi-drug resistance bacterial infections. The high mortality, morbidity and medical device-related infections are associated with biofilm formation, which requires primarily seek alternative treatment strategies. Recently, nanotechnology has emerged as a promising method for eradicating bacterial biofilm-related infection. The efficacy of nanoparticles (NPs) against bacterial infections interest great attention, and the researches on the subject are rapidly increasing. However, the majority of studies continue to focus on the antimicrobial effects of NPs in vitro, while only a few achieved in vivo and very few registered as clinical trials. The present review aimed to organize the scattered available information regarding NPs approach to eradicate bacterial biofilm-related infections. The current review highlighted the advantages and disadvantages associated with this approach, in addition to the challenges that prevent reaching the clinical applications. It was appeared that the production of NPs either as antimicrobials or as drug carriers requires further investigations to overcome the obstacles associated with their kinetic and biocompatibility.

Nanomaterials in the Management of Gram-Negative Bacterial Infections

The exploration of multiplexed bacterial virulence factors is a major problem in the early stages of Escherichia coli infection therapy. Traditional methods for detecting Escherichia coli (E. coli), such as serological experiments, immunoassays, polymerase chain reaction, and isothermal microcalorimetry have some drawbacks. As a result, detecting E. coli in a timely, cost-effective, and sensitive manner is critical for various areas of human safety and health. Intelligent devices based on nanotechnology are paving the way for fast and early detection of E. coli at the point of care. Due to their specific optical, magnetic, and electrical capabilities, nanostructures can play an important role in bacterial sensors. Another one of the applications involved use of nanomaterials in fighting microbial infections, including E. coli mediated infections. Various types of nanomaterials, either used directly as an antibacterial agent such as metallic nanoparticles (NPs) (silver, gold, zinc, etc.), or as a nanocarrier to deliver and target the antibiotic to the E. coli and its infected area. Among different types, polymeric NPs, lipidic nanocarriers, metallic nanocarriers, nanomicelles, nanoemulsion/ nanosuspension, dendrimers, graphene, etc. proved to be effective vehicles to deliver the drug in a controlled fashion at the targeted site with lower off-site drug leakage and side effects.

Reduced Crystalline Biofilm Formation on Superhydrophobic Silicone Urinary Catheter Materials

Crystalline biofilm formation in indwelling urinary catheters is a serious health problem as it creates a barrier for antibacterial coatings. This emphasizes the failure of antibacterial coatings that do not have a mechanism to reduce crystal deposition on catheter surfaces. In this study, trifluoropropyl spray-coated polydimethylsiloxane (TFP-PDMS) has been employed as an antibiofilm forming surface without any antibacterial agent. Here, TFP was coated on half-cured PDMS using the spray coating technique to obtain a durable superhydrophobic coating for a minimum five cycles of different sterilization methods. The crystalline biofilm-forming ability of Proteus mirabilis in artificial urine, under static and flow conditions, was assessed on a TFP-PDMS surface. In comparison to the commercially available silver-coated latex and silicone catheter surfaces, TFP-PDMS displayed reduced bacterial attachment over 14 days. Moreover, the elemental analysis determined by atomic absorption spectroscopy and energy-dispersive X-ray analysis revealed that the enhanced antibiofilm forming ability of TFP-PDMS was due to the self-cleaning activity of the surface. We believe that this modified surface will significantly reduce biofilm formation in indwelling urinary catheters and further warrant future clinical studies.

Binary Medical Nanofluids by Combination of Polymeric Eudragit Nanoparticles for Vehiculization of Tobramycin and Resveratrol: Antimicrobial, Hemotoxicity and Protein Corona Studies

The development of smart nanoparticles (NPs) became a trend to enhance the delivery of drugs. In the present work, Tobramycin (TB), an aminoglycoside antibiotic that displays several undesirable side effects, has been encapsulated into cationic Eudragit®E100 (E100) NPs for the treatment of infections caused by Pseudomonas aeruginosa. Combination with neutral Eudragit®NE30D (NE30D) NPs containing resveratrol (RSV), a strong natural antioxidant, increased the antimicrobial activity of TB (75% higher than free TB). NPs were stabilized with 1.0% (w/v) poloxamer 188 (P188) or poloxamer 407 (P407) as surfactants. E100 NPs showed 83.3 ± 8.5%, and 70.1 ± 2.7 encapsulation efficiency (EE) of TB with P188 and P407 coatings, respectively. The presence of NPs was confirmed by DLS and TEM studies. TB was controlled released from NPs for 6 h. Hemotoxicity tests of NPs in the range of MIC values on human blood gave negative results. Analysis of Surface Plasmon Resonance verified that NE30D/P407/RSV does not interact with plasma proteins BSA, IgG or fibrinogen, besides E100/P188/TB interact with BSA, findings that are compatible with a negligible in vivo clearance of the nanovehicles. The obtained results show a potential binary fluid composed of two NPs to highly improve the effectiveness of conventional antibiotics.

Biosafe sustainable antimicrobial encapsulation and coatings for targeted treatment and infections prevention: Preparation for another pandemic

There has been a growing concern for safety and precautions in the wake of coronavirus SARS-CoV2 pandemic also dubbed as COVID-19, which has caused a major impact at a global scale. This has resulted in many industries accelerating at fast pace new biosafety technologies and improving the already existing ones to deal with this highly contagious virus. Most governments across the globe are also mandating policies focusing on increased biosafety to prevent further spread of the virus and protect key workers such as healthcare agents, store employees and police. The COVID-19 pandemic has exposed huge gaps in the healthcare industry that include lack of effective vaccines and medicines, testing of infection, real-time monitoring of the spread of the virus, inadequate protective equipment, and scarcity of protective and intensive care of patients. Some of these may be attributed to a lack of focused research in biosafety materials. As a consequence of the pandemic, a significant body of research activities has therefore focused on biosafety materials that possess unique properties needed for biosafety applications. This graphical review aims to provide a perspective on the usage of bio-based materials to handle the imposing challenges in biosafety. This review investigates existing developments in bio-based antimicrobial encapsulations as an effective measure to deter the growth of COVID-19 virus on surfaces and minimize its spread through surface contact. This will help researchers develop further strategies in material science to focus on contagious pathogens in the future.

Myristyltrimethylammonium Bromide (MYTAB) as a Cationic Surface Agent to Inhibit Streptococcus mutans Grown over Dental Resins: An In Vitro Study

This in vitro study evaluated the effect of myristyltrimethylammonium bromide (MYTAB) on the physical, chemical, and biological properties of an experimental dental resin. The resin was formulated with dental dimetacrylate monomers and a photoinitiator/co-initiator system. MYTAB was added at 0.5 (G_0.5%), 1 (G_1%), and 2 (G_2%) wt %, and one group remained without MYTAB and was used as the control (G_Ctrl). The resins were analyzed for the polymerization kinetics, degree of conversion, ultimate tensile strength (UTS), antibacterial activity against Streptococcus mutans, and cytotoxicity against human keratinocytes. Changes in the polymerization kinetics profiling were observed, and the degree of conversion ranged from 57.36% (±2.50%) for G_2% to 61.88% (±1.91%) for G_0.5%, without a statistically significant difference among groups (p > 0.05). The UTS values ranged from 32.85 (±6.08) MPa for G_0.5% to 35.12 (±5.74) MPa for G_Ctrl (p > 0.05). MYTAB groups showed antibacterial activity against biofilm formation from 0.5 wt % (p < 0.05) and against planktonic bacteria from 1 wt % (p < 0.05). The higher the MYTAB concentration, the higher the cytotoxic effect, without differences between G_Ctrl e G_0.5% (p > 0.05). In conclusion, the addition of 0.5 wt % of MYTAB did not alter the physical and chemical properties of the dental resin and provided antibacterial activity without cytotoxic effect.