A Pentapeptide with Tyrosine Moiety as Fluorescent Chemosensor for Selective Nanomolar-Level Detection of Copper(II) Ions

Tripeptide-Assisted Gold Nanocluster Formation for Fe3+ and Cu2+ Sensing

Fluorescent gold nanoclusters (AuNCs) have shown promise as metal ion sensors. Further research into surface ligands is crucial for developing sensors that are both selective and sensitive. Here, we designed simple tripeptides to form fluorescent AuNCs, capitalizing on tyrosine's reduction capability under alkaline conditions. We investigated tyrosine's role in both forming AuNCs and sensing metal ions. Two tripeptides, tyrosine-cysteine-tyrosine (YCY) and serine-cysteine-tyrosine (SCY), were used to form AuNCs. YCY peptides produced AuNCs with blue and red fluorescence, while SCY peptides produced blue-emitting AuNCs. The blue fluorescence of YCY- and SCY-AuNCs was selectively quenched by Fe3+ and Cu2+, whereas red-emitting YCY-AuNC fluorescence remained stable with 13 different metal ions. The number of tyrosine residues influenced the sensor response. DLS measurements revealed different aggregation propensities in the presence of various metal ions, indicating that chelation between the peptide and target ions led to aggregation and fluorescence quenching. Highlighting the innovation of our approach, our study demonstrates the feasibility of the rational design of peptides for the formation of fluorescent AuNCs that serve as highly selective and sensitive surface ligands for metal ion sensing. This method marks an advancement over existing methods due to its dual capability in both synthesizing gold nanoclusters and detecting analytes, specifically Fe3+ and Cu2+.

New Amino Acid-Based Thiosemicarbazones and Hydrazones: Synthesis and Evaluation as Fluorimetric Chemosensors in Aqueous Mixtures

Bearing in mind the interest in the development and application of amino acids/peptides as bioinspired systems for sensing, a series of new phenylalanine derivatives bearing thiosemicarbazone and hydrazone units at the side chain were synthesised and evaluated as fluorimetric chemosensors for ions. Thiosemicarbazone and hydrazone moieties were chosen because they are considered both proton-donor and proton-acceptor, which is an interesting feature in the design of chemosensors. The obtained compounds were tested for the recognition of organic and inorganic anions (such as AcO-, F-, Cl-, Br-, I-, ClO4-, CN-, NO3-, BzO-, OH-, H2PO4- and HSO4-) and of alkaline, alkaline-earth, and transition metal cations, (such as Na+, K+, Cs+, Ag+, Cu+, Cu2+, Ca2+, Cd2+, Co2+, Pb2+, Pd2+, Ni2+, Hg2+, Zn2+, Fe2+, Fe3+ and Cr3+) in acetonitrile and its aqueous mixtures in varying ratios via spectrofluorimetric titrations. The results indicate that there is a strong interaction via the donor N, O and S atoms at the side chain of the various phenylalanines, with higher sensitivity for Cu2+, Fe3+ and F- in a 1:2 ligand-ion stoichiometry. The photophysical and metal ion-sensing properties of these phenylalanines suggest that they might be suitable for incorporation into peptide chemosensory frameworks.

Stretching the chains: the destabilizing impact of Cu2+ and Zn2+ ions on K48-linked diubiquitin

Ubiquitin signalling and metal homeostasis play key roles in controlling several physiological cellular activities, including protein trafficking and degradation. While some relationships between these two biochemical pathways have started to surface, our knowledge of their interplay remains limited. Here, we employ a variety of techniques, such as circular dichroism, differential scanning calorimetry, pressure perturbation calorimetry, fluorescence emission, SDS-PAGE, and small-angle X-ray scattering (SAXS) to evaluate the impact of Cu2+ and Zn2+ ions on the structure and stability of K48 linked diubiquitin (K48-Ub2), a simple model for polyubiquitin chains. The SAXS analysis results show that the structure of the metal-free protein is similar to that observed when the protein is bound to the E2 conjugating enzyme, lending support to the idea that the structure of unanchored K48-linked ubiquitin chains is sufficient for identification by conjugating enzymes without the need for an induced fit mechanism. Our results indicate that K48-Ub2 can coordinate up to four metal ions with both copper and zinc ions inducing slight changes to the secondary structure of the protein. However, we noted significant distinctions in their impacts on protein stability and overall architecture. Specifically, Cu2+ ions resulted in a destabilization of the protein structure, which facilitated the formation of dimer aggregates. Next, we observed a shift in the conformational dynamics of K48-Ub2 toward less compact and more flexible states upon metal ion binding, with Zn2+ inducing a more significant effect than Cu2+ ions. Our structural modelling study demonstrates that both metal ions induced perturbations in the K48-Ub2 structure, leading to the separation of the two monomers thus inhibiting interactions with E2 enzymes. In conclusion, the findings from this study enhance our comprehension of the mechanisms underlying Ub chains recognition. Moreover, they strengthen the notion that drug discovery initiatives aimed at targeting metal-mediated disruptions in Ub signaling hold great potential for treating a wide range of diseases that stem from abnormal protein accumulation.

Investigation of hexacyanoferrate(II)/(III) charge-dependent interactions with bovine and human serum albumins

In the present paper, the binding interactions of highly negative-charged ions, namely hexacyanoferrates(II/III), i.e. [Fe(CN)₆]^4- and [Fe(CN)₆]^3- with bovine and human serum albumins (BSA and HSA, respectively) have been studied for the first time in an aqueous solution (10 mM cacodylate buffer of pH 7.0) using steady-state fluorescence spectroscopy, isothermal titration calorimetry, and CD spectroscopy supported by molecular dynamics-based computational approaches. The Stern-Volmer equation as well as its modifications suggested that hexacyanoferrates(II/III) effectively quenched the intrinsic fluorescence of the albumins through a static mechanism. The proteins under study possess only one binding site on the surface capable of binding one mole of hexacyanoferrates(II/III) ions per one mole of albumin (HSA or BSA). The formation of albumin complexes is an enthalpy-driven process (|ΔH_ITC| > |TΔS_ITC|). The strength of the interactions depends mainly on the type of albumin, and changes as follows: BSA-K₃[Fe(CN)₆] ∼ BSA-K₄[Fe(CN)₆] > HSA-K₃[Fe(CN)₆] ∼ HSA-K₄[Fe(CN)₆]. Finally, potential binding sites of bovine and human serum albumins have been investigated and discussed based on a competitive fluorescence displacement assay (with warfarin and ibuprofen as site markers) and molecular dynamics simulations.

Metal-Peptide Complexes with Antimicrobial Potential for Cotton Fiber Protection

A study of the formation of copper (II) complexes with hemorphin peptide motifs in alkalic water solutions is presented. The effect of the peptide ligand on the complexing properties of the Cu (II) ion was quantified by giving the stoichiometry and stability of the complex compounds in the medium in which they are formed using voltammetric (cyclic) and spectral (UV-Vis and fluorimetric) analytical techniques. The resulting complexes were examined via IR spectroscopy to detect M-N and M-O oscillations and using the EPR approach in solution and in the solid phase to view the coordination and ligand binding regime. The possibility of the synergistic action of copper ions in the antivirus protection processes of cotton fibers coated in the same solvent with the newly obtained complex compounds was also investigated. One of the advantages is the formation of the complexes in an environment where the immobilization takes place, which contributes to increasing the efficiency of the process. The obtained results may serve as an aid for future more detailed biological studies of structure-activity relationships (SARs).

A Diphenylalanine Based Pentapeptide with Fibrillating Self-Assembling Properties

Peptides and their related compounds can self-assemble into diverse nanostructures of different shapes and sizes in response to various stimuli such as pH, temperature or ionic strength. Here we report the synthesis and characterization of a lysozyme derived pentapeptide and its ability to build well-defined fibrillar structures. Lysozyme FESNF peptide fragment was synthesized by solid phase peptide synthesis using the Fmoc/t-Bu strategy, purified by analytical high-performance liquid chromatography (HPLC) and its molecular weight was confirmed by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Spectroscopic features of this pentapeptide were investigated by UV-visible spectroscopy and fluorimetry showing the pattern of marginal phenylalanine residues within the peptide sequence. Self-assembling properties were determined using atomic force microscopy (AFM), aggregation index and thioflavin T assay (ThT). FESNF generating fibrillar structures observed by AFM and aggregation propensity were primarily influenced by pH conditions. Moreover, the experimental data were confirmed by molecular dynamics simulation studies. The obtained fibrils will be used next to explore their potential to act as support material for medical and cosmetic application.

Progress in the Development of Biosensors Based on Peptide-Copper Coordination Interaction

Copper ions, as the active centers of natural enzymes, play an important role in many physiological processes. Copper ion-based catalysts which mimic the activity of enzymes have been widely used in the field of industrial catalysis and sensing devices. As an important class of small biological molecules, peptides have the advantages of easy synthesis, excellent biocompatibility, low toxicity, and good water solubility. The peptide-copper complexes exhibit the characteristics of low molecular weight, high tenability, and unique catalytic and photophysical properties. Biosensors with peptide-copper complexes as the signal probes have promising application prospects in environmental monitoring and biomedical analysis and diagnosis. In this review, we discussed the design and application of fluorescent, colorimetric and electrochemical biosensors based on the peptide-copper coordination interaction.

Carbon Quantum Dots Based Chemosensor Array for Monitoring Multiple Metal Ions

The simultaneous identification of multiple metal ions in water has attracted enormous research interest in the past few decades. We herein describe a novel method for multiple metal ion detection using a carbon quantum dots (CQDs)-based chemosensor array and the CQDs are functionalized with different amino acids (glutamine, histidine, arginine, lysine and proline), which act as sensing elements in the sensor array. Eleven metal ions are successfully identified by the designed chemosensor array, with 100% classification accuracy. Importantly, the proposed method allowed the quantitative prediction of the concentration of individual metal ions in the mixture with the aid of a support vector machine (SVM). The sensor array also enables the qualitative detection of unknown metal ions under the interference of tap water and local river water. Thus, the strategy provides a novel high-throughput approach for the identification of various analytes in complex systems.

A New Cellulose-Based Fluorescent Probe for Specific and Sensitive Detection of Cu2+ and Its Applications in the Analysis of Environmental Water

In this work, a novel fluorescent probe CMC−GE−AQ with an effective sensitive detection ability for Cu²⁺ was synthesized and constructed by using carboxymethyl cellulose (CMC) as the skeleton and 8-aminoquinoline (AQ) as the fluorophore. This probe exhibited a highly specific “turn-off” fluorescence response to Cu²⁺, and the fluorescence color changed from bright orange to colorless after adding Cu²⁺. The probe could selectively detect Cu²⁺ in a complex environment and its detection limit (LOD), the binding constant (K_a) and the numbers of binding sites (n) were calculated to be 6.4 × 10⁻⁸ mol L⁻¹, 1.7 × 10⁶ mol⁻¹ L and 1.2, respectively. The sensing detection mechanism was confirmed by X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations. In addition, the probe CMC−GE−AQ was successfully applied to detect Cu²⁺ in real water samples, and CMC−GE−AQ-based fluorescent microspheres can serve as a convenient tool for the detection of Cu²⁺.

Quantifying the Binding Interactions Between Cu(II) and Peptide Residues in the Presence and Absence of Chromophores

Copper(II) is an essential metal in biological systems, conferring unique chemical properties to the biomolecules with which it interacts. It has been reported to directly bind to a variety of peptides and play both necessary and pathological roles ranging from mediating structure to electron transfer properties to imparting catalytic function. Quantifying the binding affinity and thermodynamics of these Cu(II)-peptide complexes in vitro provides insight into the thermodynamic driving force of binding, potential competitions between different metal ions for the peptide or between different peptides for Cu(II), and the prevalence of the Cu(II)-peptide complex in vivo. However, quantifying the binding thermodynamics can be challenging due to a myriad of factors, including accounting for all competing equilibria within a titration experiment, especially in cases where there are a lack of discrete spectroscopic handles representing the peptide, the d-block metal ion, and their interactions. Here, a robust set of experiments is provided for the accurate quantification of Cu(II)-peptide thermodynamics. This article focuses on the use of electronic absorption spectroscopy in the presence and absence of chromophoric ligands to provide the needed spectroscopic handle on Cu(II) and the use of label-free isothermal titration calorimetry. In both experimental techniques, a process is described to account for all competing equilibria. While the focus of this article is on Cu(II), the described set of experiments can apply beyond Cu(II)-peptide interactions, and provide a framework for accurate quantification of other metal-peptide systems under physiologically relevant conditions.

Veni, Vidi, Vici: Immobilized Peptide-Based Conjugates as Tools for Capture, Analysis, and Transformation

Analysis of peptide biomarkers of pathological states of the organism is often a serious challenge, due to a very complex composition of the cell and insufficient sensitivity of the current analytical methods (including mass spectrometry). One of the possible ways to overcome this problem is sample enrichment by capturing the selected components using a specific solid support. Another option is increasing the detectability of the desired compound by its selective tagging. Appropriately modified and immobilized peptides can be used for these purposes. In addition, they find application in studying the specificity and activity of proteolytic enzymes. Immobilized heterocyclic peptide conjugates may serve as metal ligands, to form complexes used as catalysts or analytical markers. In this review, we describe various applications of immobilized peptides, including selective capturing of cysteine-containing peptides, tagging of the carbonyl compounds to increase the sensitivity of their detection, enrichment of biological samples in deoxyfructosylated peptides, and fishing out of tyrosine–containing peptides by the formation of azo bond. Moreover, the use of the one-bead-one-compound peptide library for the analysis of substrate specificity and activity of caspases is described. Furthermore, the evolution of immobilization from the solid support used in peptide synthesis to nanocarriers is presented. Taken together, the examples presented here demonstrate immobilized peptides as a multifunctional tool, which can be successfully used to solve multiple analytical problems.

Highly Sensitive and Selective Fluorescence "Turn-On" Detection of Pb (II) Based on Fe3O4@Au-FITC Nanocomposite

New nanocomposites, Fe₃O₄@Au-FITC, were prepared and explored to develop a fluorescent detection of Pb²⁺. The Fe₃O₄@AuNPs-FITC nanocomposites could be etched by Pb²⁺ in the presence of Na₂S₂O₃, leading to fluorescence recovery of FITC quenched by Fe₃O₄@Au nanocomposites. With the increase of Pb²⁺ concentration, the fluorescence recovery of Fe₃O₄@AuNPs-FITC increased gradually. Under optimized conditions, a detection limit of 5.2 nmol/L of Pb²⁺ with a linear range of 0.02-2.0 µmol/L were obtained. The assay demonstrated negligible response to common metal ions. Recoveries of 98.2-106.4% were obtained when this fluorescent method was applied in detecting Pb²⁺ spiked in a lake-water sample. The above results demonstrated the high potential of ion-induced nanomaterial etching in developing robust fluorescent assays.

A review on recent advances in amino acid and peptide-based fluorescence and its potential applications

Fluorescence is widely used to detect functional groups and ions, and peptides are used in various fields due to their excellent biological activity.

Tetraphenylethylene AIEgen bearing thiophenylbipyridine receptor for selective detection of copper(ii) ion

A new tetraphenylethylene (TPE) AIEgen appended with a thiophenylbipyridine moiety exhibits sensitivity and selectivity towards copper ions via a PET “turn on–turn off” mechanism.

Interactions of Aβ1-42 Peptide and Its Three Fragments (Aβ8-12, Aβ8-13, and Aβ5-16) with Selected Nonsteroidal Drugs and Compounds of Natural Origin

In the following paper, we present the results of our studies on the interactions of the Aβ1-42 peptide and its three short fragments, namely Aβ5-16 (RHDSGYEVHHQK; HZ1), Aβ8-13 (SGYEVH; HZ2), and Aβ8-12 (SGYEV; HZ3) with selected painkillers (ibuprofen and aspirin) and compounds of natural origin (anabasine and epinephrine). Steady-state fluorescence spectroscopy was used to study the binding properties of the selected systems. Additionally, based on molecular dynamics (MD) calculations supported by NMR-derived restrains, we have proposed the most likely area of the interactions of Aβ1-42 and Aβ5-16 peptides with the investigated compounds. The influence of symmetrically oriented side chains of amino acid residues present in the first part of the Aβ1-42 sequence on the stability of the resulting complexes has been discussed. Finally, the changes in the peptide structures on account of complex formation were analyzed.