Use of a Mixture of Polyols Based on Metasilicic Acid and Recycled PLA for Synthesis of Rigid Polyurethane Foams Susceptible to Biodegradation

A Comprehensive Review of Reactive Flame Retardants for Polyurethane Materials: Current Development and Future Opportunities in an Environmentally Friendly Direction

Polyurethanes are among the most significant types of polymers in development; these materials are used to produce construction products intended for work in various conditions. Nowadays, it is important to develop methods for fire load reduction by using new kinds of additives or monomers containing elements responsible for materials' fire resistance. Currently, additive antipyrines or reactive flame retardants can be used during polyurethane material processing. The use of additives usually leads to the migration or volatilization of the additive to the surface of the material, which causes the loss of the resistance and aesthetic values of the product. Reactive flame retardants form compounds containing special functional groups that can be chemically bonded with monomers during polymerization, which can prevent volatilization or migration to the surface of the material. In this study, reactive flame retardants are compared. Their impacts on polyurethane flame retardancy, combustion mechanism, and environment are described.

Evolution Law of Structural Form and Heat Transfer Performance of Thermal Insulation System

Building thermal insulation and energy conservation have become urgent problems in the field of civil engineering because they are important for achieving the goal of carbon neutralization. Thermal conductivity is an important index for evaluating the thermal insulation of materials. To study the influence of different porosity levels on the thermal conductivity of materials, this paper established a random distribution model using MATLAB and conducted a comparative analysis using COMSOL finite element software and classical theoretical numerical calculation formulas. The thermal conductivity of composite materials was determined based on a theoretical calculation formula and COMSOL software simulations, and the theoretical calculation results and simulation results were compared with the measured thermal conductivity of the composites. Furthermore, the influence of the width of the gaps between the materials on the heat transfer process was simulated in the fabricated roof structure. The results showed the following: (1) The thermal conductivity values calculated using the Zimmerman model were quite different from those calculated using the Campbell-Allen model and those calculated using the COMSOL software; (2) The thermal conductivity values calculated using the theoretical calculation formula were lower than the measured data, and the maximum relative error was more than 29%. The COMSOL simulation results were in good agreement with the measured data, and the relative error was less than 5%; (3) When the gap width was less than 60 mm, it increased linearly with the heat transfer coefficient. The heat transfer coefficient increased slowly when the gap width was greater than 60 mm. This was mainly due to the thermal bridge effect inside the insulation system. Based on these research results, a thermal insulation system was prepared in a factory.

Oligoetherols and polyurethane foams based on cyclotriphosphazene of reduced flammability

New oligoetherols with based on cyclotriphosphazene ring were synthesized by functionalization of hexachlorocyclotriphosphazene with glycidol followed by reaction with ethylene glycol and glycerol. Oligoetherols were characterized by IR, 1H-NMR, and MALDI-ToF and hydroxyl number as well as physical properties like density, viscosity and surface tension. The oligoetherols were further converted into polyurethane foams. The rigid foams of enhanced thermal stability and considerably diminished flammability were obtained and their apparent density, water uptake and polymerization shrinkage, thermal conductivity coefficient and thermal stability were determined. The flammability of foams was studied by microcalorimetric methods, horizontal flaming test and oxygen index. The obtained polyurethane foams with incorporated cyclotriphosphazene ring are self-extinguishing.

Graphical abstract

Synthesis of Mono Ethylene Glycol (MEG)-Based Polyurethane and Effect of Chain Extender on Its Associated Properties

This study depicts the investigations of the effect of composition of aromatic polyester polyol produced from terephthalic acid (TPA) and different concentrations of mono ethylene glycol (mEG) as a chain extender on the mechanical properties of polyurethane (PU) elastomer. Aromatic polyester polyols are prepared via the poly-esterification of adipic acid, terephthalic acid, catalyst, and mono ethylene glycol; while a polyurethane elastomer is formulated via the pre-polymerization of polyol with pure monomeric Methylene diphenyl diisocyanate (MDI.) Mechanical properties of polyurethane elastomers are examined, such as hardness via shore A hardness, apparent density via ASTM (American Society for Testing and Materials) D1622–08, and abrasion wear resistance via a Deutches Institut fur Normung (DIN) abrasion wear resistance tester. Structural properties are investigated through Fourier-transform infrared spectroscopy (FTIR) analysis. Results reveal that the shore A hardness of the PU elastomer increases with an increasing concentration of mEG from 4g to 12g. Nevertheless, the elastomer’s density depicts a reduction with an increasing extender content. The abrasion wear resistance of polyurethane, however, increases with an increasing concentration of glycol. A structural analysis through FTIR confirms the formation of polyurethane elastomer through the characteristic peaks demonstrated.

Coir Fibers Treated with Henna as a Potential Reinforcing Filler in the Synthesis of Polyurethane Composites

In this study, coir fibers were successfully modified with henna (derived from the Lawsonia inermis plant) using a high-energy ball-milling process. In the next step, such developed filler was used as a reinforcing filler in the production of rigid polyurethane (PUR) foams. The impact of 1, 2, and 5 wt % of coir-fiber filler on structural and physico-mechanical properties was evaluated. Among all modified series of PUR composites, the greatest improvement in physico-mechanical performances was observed for PUR composites reinforced with 1 wt % of the coir-fiber filler. For example, on the addition of 1 wt % of coir-fiber filler, the compression strength was improved by 23%, while the flexural strength increased by 9%. Similar dependence was observed in the case of dynamic-mechanical properties—on the addition of 1 wt % of the filler, the value of glass transition temperature increased from 149 °C to 178 °C, while the value of storage modulus increased by ~80%. It was found that PUR composites reinforced with coir-fiber filler were characterized by better mechanical performances after the UV-aging.