Effect of Different Wavelengths of Laser Irradiation on the Skin Cells

Synergistic effects of platelet-rich fibrin and photobiomodulation on bone regeneration in MC3T3-E1 Preosteoblasts

BACKGROUND

Platelet-rich fibrin (PRF) and Photobiomodulation (PBM) are established methods for promoting bone healing. PRF enhances cell proliferation and migration due to its rich concentration of growth factors, while PBM stimulates tissue repair through mitochondrial activation. Despite their efficacies, no in-depth studies have explored the synergistic effects of combining PRF and PBM.

METHODS

PRF was prepared at 50 % and 100 % concentrations, and PBM was applied using an 830 nm near-infrared laser at a dose of 5 J/cm². Cell viability, migration, and calcium deposition were assessed over seven and fourteen days.

RESULTS

The combination of PRF and PBM significantly improved cell viability, migration, and calcium deposition, with the most notable effects observed after seven and fourteen days. However, a slight decrease in calcium deposition was noted in the 100 % PRF combined with the PBM group, suggesting a potential feedback mechanism at higher PRF concentrations.

CONCLUSIONS

This study explores the synergistic effects of PRF and PBM, offering new insights into optimizing bone tissue engineering strategies. The findings highlight the potential of this combined approach in enhancing bone regeneration, although further research is needed to refine the optimal conditions for these therapies.

The Efficacy of Multiwavelength Red and Near-Infrared Transdermal Photobiomodulation Light Therapy in Enhancing Female Fertility Outcomes and Improving Reproductive Health: A Prospective Case Series with 9-Month Follow-Up

Background/Objectives: Female infertility due to unexpected causes exhibits a great challenge for both clinicians and women who are trying to conceive. The present clinical case series study aimed to evaluate the efficacy of multiple wavelengths of red and near-infrared (NIR) laser photobiomodulation (PBM) for increasing the potential of fertility in women and improving reproductive health in unexplained infertility issues. The objectives were to assess the following: (1) any adverse effects; (2) the possibility of producing an effective PBM protocol; (3) and healthy live birth. The inclusion criteria were to related to females who failed to conceive naturally beyond two years, multiple miscarriages, molar pregnancy, non-viable embryos from in vitro fertilisation (IVF) cycles, and failure to complete successful implantation of viable pre-implantation genetic tested (PGT-A) embryos. Methods: Case series of three female subjects with unexplained age-related infertility issues, which included a failure to conceive naturally beyond two years, multiple miscarriages, molar pregnancy, non-viable embryos from IVF cycles, and failure to complete successful implantation of viable pre-implantation genetic tested (PGT-A) embryos. In each case, previous conditions were recorded and then compared with outcomes after the patient received a course of PBM treatments. In every case, fertility outcomes improved. Three cases resulted in a full-term pregnancy and the birth of a healthy baby. PBM treatments were given at weekly and/or at two-week intervals using IR and NIR wavelengths between 600 nm and 1000 nm in the lead up to natural conception, IVF oocyte retrieval, blastocyst/embryo implantation, and/or the production of viable embryos. Results: In every case, fertility outcomes improved. Improvements in reproductive health outcomes in each case give reason to suggest that PBM may help to improve unexplained age-related infertility. Conclusions: Our study demonstrated that multiwavelength of red and NIR PBM with either an LED or laser, or a combination, improved female fertility and reproductive health and contributed to healthy live births in females diagnosed with unexplained age-related infertility. Extensive studies with robust data are warranted to validate our PBM dosimetry and treatment protocols. Moreover, understanding the genetic and phenotype biomarkers is important to standardise a range of PBM light dosimetry.

Red and Green LED Light Therapy: A Comparative Study in Androgenetic Alopecia

BACKGROUND

Androgenetic alopecia (AGA) affects both men and women, characterized by progressive hair thinning. While current treatments like minoxidil and finasteride have efficacy limitations and side effects, low-level light therapy (LLLT) using red or near-infrared light has emerged as a promising alternative. Recent animal studies suggest potential benefits from green LED light, though human data are sparse.

METHODS

This study utilized an innovative LED helmet emitting red and green LED light on respective halves of the frontal scalp, delivering an energy density of 40 J/cm2 over 20 min. Clinical photography, physician evaluations on a 7-point scale, patient satisfaction, and measurements of hair density and hair diameter were employed. Data were analyzed using linear mixed-effects models, with significance set at p < 0.05.

RESULTS

Seventeen participants (47.1% male, 52.9% female, average age 46.47 years) demonstrated notable improvements after 6 months of treatment. Red and green LEDs both significantly increased hair diameter, non-vellus hair density, and satisfaction scores. Notably, the red LED therapy resulted in a statistically significant decrease in vellus hair density and achieved a greater increase in hair diameter compared to the green LED therapy. Minimal adverse effects were reported, primarily consisting of tolerable scalp heat and mild redness.

CONCLUSION

Both red and green LED therapies effectively enhanced hair growth, increasing density and thickness over 6 months. Red LED demonstrated superior improvements in specific measures. Consequently, both therapies present safe and viable alternatives for the management of AGA, expanding the repertoire of available treatment options.

Visible light accelerates skin wound healing and alleviates scar formation in mice by adjusting STAT3 signaling

During the wound healing process, the activation of signal transducer and activator of transcription 3 (STAT3) is considered crucial for the migration and proliferation of epithelial cells, as well as for establishing the inflammatory environment. However, an excessive STAT3 activation aggravates scar formation. Here we show that 450 nm blue light and 630 nm red light can differentially regulate the phosphorylation of STAT3 (p-STAT3) and its downstream cytokines in keratinocytes. Further mechanistic studies reveal that red light promotes wound healing by activating the PI3 kinase p110 beta (PI3Kβ)/STAT3 signaling axis, while blue light inhibits p-STAT3 at the wound site by modulating cytochrome c-P450 (CYT-P450) activity and reactive oxygen species (ROS) generation. In a mouse scar model, skin wound healing can be significantly accelerated with red light followed by blue light to reduce scar formation. In summary, our study presents a potential strategy for regulating epithelial cell p-STAT3 through visible light to address skin scarring issues and elucidates the underlying mechanisms.

The synergistic effect of phototherapy and active substances on hair growth

Androgenic alopecia (AGA) typically manifests post-puberty, resulting in decreases in hair density, disruptions in the hair growth cycle, and alterations in hair follicle micro structure. Dihydrotestosterone (DHT) is a key hormone implicated in hair loss, especially on male. In this study, we found that each of arginine (Arg), arterial extract (AE) or biotin tripeptide-1 (BT-1), when combined with low level light therapy (LLLT, at 630 nm, 2 J/cm2), showed the efficacy in enhancing mitochondrial functions, cell proliferation and collagen synthesis in fibroblasts. Additionally, CARRIPOWER (the complexes of AE, BT-1, Arg, and Diaminopyrimidine derivatives), in conjunction with LLLT (630 nm, 2 J/cm2), showed promising results in dermal papilla cells (DPCs). The promising results contained not also inflammatory cytokines (IL-1β and IL-6) and cell pro apoptotic factor (TGF-β2) reduction, but also Wnt pathway inhibition by decreasing DKK1 level, and pro-hair growth factors (vascular endothelial growth factor (VEGF) and β-catenin) increase. This innovative combination therapy offers a potential solution for the treatment of AGA, addressing both hormonal and cellular factors involved in hair loss.

The efficacy of light-guiding microneedle patch for stimulating hair growth in androgenetic alopecia

Androgenetic alopecia (AGA) is the most common form of hair loss characterized by miniaturization of hair follicles. Low-level light therapy (LLLT) and microneedling have shown potential in promoting hair regrowth. This study aims to evaluate the efficacy of an innovative light-emitting diode (LED) helmet cooperated with a novel light-guiding microneedle patch (LMNP) for stimulating hair growth in AGA. In this randomized clinical trial, 16 AGA patients received treatments using light-guiding microneedle patches (LMNPs) illuminated by a LED helmet equipped with green (522 nm) and red (633 nm) LEDs, delivering 50 mW/cm2 power and 40 J/cm2 energy. Treatments were applied weekly for 24 weeks, targeting the frontal recession area. The right side of the scalp was treated with green light and the left with red light, each combined with a LMNP featuring 900 µm height needles at a density of 105 per square centimeter. Hair density and diameter, along with patient and physician satisfaction scores, were assessed monthly. Both red and green LED treatments with LMNP, significantly enhanced hair density and diameter. Satisfaction scores, as reported by both physicians and participants, increased over time. Comparative analyses revealed no statistically significant differences in average satisfaction scores or in changes in hair density and diameter between the groups by the end of the study. Additionally, no serious adverse effects were reported, highlighting the safety of the treatments. The combined Light sources which is portable LED helmet and LMNPs shows promise as a non-invasive, effective treatment for AGA, with similar efficacy between red and green wavelengths.

The cytotoxicity of breast cancer mcf-7 cell line treated with different wavelength of low-level laser

Breast cancer remains a significant global health challenge, spurring ongoing investigations into innovative treatment approaches. Low-level laser therapy (LLLT) has emerged as a promising non-invasive therapeutic avenue of interest. This research delves into the impact of LLLT on the cytotoxicity of the MCF-7 breast cancer cell line, employing lasers emitting various wavelengths. The objective is to assess whether diverse LLLT wavelengths elicit disparate cytotoxic responses, shedding light on LLLT's potential as a targeted breast cancer treatment. MCF-7 cell cultures were subjected to lasers of varying wavelengths, including blue (473 nm), red (660 nm), and near-infrared (780 nm). Each wavelength was delivered at four different power levels: 10, 25, 45, and 65 mW, with exposure durations of 60, 300, 600, and 900 s. Cellular responses, encompassing factors such as cell viability, and cytotoxicity were assessed using WST-1 assays technique. Statistical analysis was performed to discern the wavelength-specific impacts of low-level laser therapy (LLLT) on MCF-7 cells. The study revealed that the blue laser had the least noticeable adverse impact on MCF-7 breast cancer cell lines, leading to the highest cell survival rate of 107.62% after 24 h. The most severe toxicity occurred when the laser was used at 45 mW for 900 s, resulting in cell viability ranging from 81.85% to 107.62%. As for cell viability after exposure to the red laser, the mildest harmful effect was observed at 45 mW power for 60 s, resulting in a cell survival rate of 147.62%. Conversely, the most significant toxic response occurred at 10 mW power for 60 s, resulting in a cell viability of 91.56%. In contrast, when employing infrared laser irradiation, the least substantial cytotoxic effect on MCF-7 cells was observed at 10 mW power for 600 s, resulting in the highest cell viability of 109.37% after 24 h. The most pronounced cytotoxic effect was observed by infrared laser (780 nm) at 25 mW power for 900 s, leading to the lowest viability of 32.53%.

Strategies to make human skin models based on cellular senescence for ageing research

Human skin ageing is closely related to the ageing of the whole organism, and it's a continuous multisided process that is influenced not only by genetic and physiological factors but also by the cumulative impact of environmental factors. Currently, there is a scientific community need for developing skin models representing ageing processes to (i) enhance understanding on the mechanisms of ageing, (ii) discover new drugs for the treatment of age-related diseases, and (iii) develop effective dermo-cosmetics. Bioengineers worldwide are trying to reproduce skin ageing in the laboratory aiming to better comprehend and mitigate the senescence process. This review provides details on the main ageing molecular mechanisms and procedures to obtain in vitro aged skin models.

Bacterial reduction and temperature increase of titanium dental implant models treated with a 445 nm diode laser: an in vitro study

In this in vitro study, the use of a 445 nm diode laser was investigated for the decontamination of titanium dental implants. Different irradiation protocols and the effect of repetitive laser irradiation on temperature increase and decontamination efficacy were evaluated on titanium implant models. An automated setup was developed to realize a scanning procedure for a full surface irradiation to recapitulate a clinical treatment. Three irradiation parameter sets A (continuous wave, power 0.8 W, duty cycle (DC) 100%, and 5 s), B (pulsed mode, DC 50%, power 1.0 W, and 10 s), and C (pulsed mode, DC 10%, power 3.0 W, and 20 s) were used to treat the rods for up to ten consecutive scans. The resulting temperature increase was measured by a thermal imaging camera and the decontamination efficacy of the procedures was evaluated against Escherichia coli and Staphylococcus aureus, and correlated with the applied laser fluence. An implant's temperature increase of 10 °C was set as the limit accepted in literature to avoid thermal damage to the surrounding tissue in vivo. Repeated irradiation of the specimens resulted in a steady increase in temperature. Parameter sets A and B caused a temperature increase of 11.27 ± 0.81 °C and 9.90 ± 0.37 °C after five consecutive laser scans, respectively, while parameter set C resulted in a temperature increase of only 8.20 ± 0.53 °C after ten surface scans. The microbiological study showed that all irradiation parameter sets achieved a complete bacterial reduction (99.9999% or 6-log10) after ten consecutive scans, however only parameter set C did not exceed the temperature threshold. A 445 nm diode laser can be used to decontaminate dental titanium rods, and repeated laser irradiation of the contaminated areas increases the antimicrobial effect of the treatment; however, the correct choice of parameters is needed to provide adequate laser fluence while preventing an implant's temperature increase that could cause damage to the surrounding tissue.

Laser-Based Selective Material Processing for Next-Generation Additive Manufacturing

The connection between laser-based material processing and additive manufacturing is quite deeply rooted. In fact, the spark that started the field of additive manufacturing is the idea that two intersecting laser beams can selectively solidify a vat of resin. Ever since, laser has been accompanying the field of additive manufacturing, with its repertoire expanded from processing only photopolymer resin to virtually any material, allowing liberating customizability. As a result, additive manufacturing is expected to take an even more prominent role in the global supply chain in years to come. Herein, an overview of laser-based selective material processing is presented from various aspects: the physics of laser-material interactions, the materials currently used in additive manufacturing processes, the system configurations that enable laser-based additive manufacturing, and various functional applications of next-generation additive manufacturing. Additionally, current challenges and prospects of laser-based additive manufacturing are discussed.

Electromagnetic Modulation of Cell Behavior: Unraveling the Positive Impacts in a Comprehensive Review

There are numerous effective procedures for cell signaling, in which humans directly transmit detectable signals to cells to govern their essential behaviors. From a biomedical perspective, the cellular response to the combined influence of electrical and magnetic fields holds significant promise in various domains, such as cancer treatment, targeted drug delivery, gene therapy, and wound healing. Among these modern cell signaling methods, electromagnetic fields (EMFs) play a pivotal role; however, there remains a paucity of knowledge concerning the effects of EMFs across all wavelengths. It's worth noting that most wavelengths are incompatible with human cells, and as such, this study excludes them from consideration. In this review, we aim to comprehensively explore the most effective and current EMFs, along with their therapeutic impacts on various cell types. Specifically, we delve into the influence of alternating electromagnetic fields (AEMFs) on diverse cell behaviors, encompassing proliferation, differentiation, biomineralization, cell death, and cell migration. Our findings underscore the substantial potential of these pivotal cellular behaviors in advancing the treatment of numerous diseases. Moreover, AEMFs wield a significant role in the realms of biomaterials and tissue engineering, given their capacity to decisively influence biomaterials, facilitate non-invasive procedures, ensure biocompatibility, and exhibit substantial efficacy. It is worth mentioning that AEMFs often serve as a last-resort treatment option for various diseases. Much about electromagnetic fields remains a mystery to the scientific community, and we have yet to unravel the precise mechanisms through which wavelengths control cellular fate. Consequently, our understanding and knowledge in this domain predominantly stem from repeated experiments yielding similar effects. In the ensuing sections of this article, we delve deeper into our extended experiments and research.

Melanometry for objective evaluation of skin pigmentation in pulse oximetry studies

Pulse oximetry enables real-time, noninvasive monitoring of arterial blood oxygen levels. However, results can vary with skin color, thus detecting disparities during clinical validation studies requires an accurate measure of skin pigmentation. Recent clinical studies have used subjective methods such as self-reported color, race/ethnicity to categorize skin. Melanometers based on optical reflectance may offer a more effective, objective approach to assess pigmentation. Here, we review melanometry approaches and assess evidence supporting their use as clinical research tools. We compare performance data, including repeatability, robustness to confounders, and compare devices to each other, to subjective methods, and high-quality references. Finally, we propose best practices for evaluating melanometers and discuss alternate optical approaches that may improve accuracy. Whilst evidence indicates that melanometers can provide superior performance to subjective approaches, we encourage additional research and standardization efforts, as these are needed to ensure consistent and reliable results in clinical studies.

Water-filtered infrared A irradiation exerts antifungal effects on the skin fungus Malassezia

Many common skin diseases are associated with changes in the microbiota. This applies for the commensal yeast Malassezia, which is linked to a wide range of skin disorders ranging from mild dandruff to severe seborrheic and atopic dermatitis, all of which have a detrimental impact on the individuals' quality of life. While antifungal medications offer relief in many cases, the challenges of disease recurrence and the emergence of resistance to the limited range of available antifungal drugs poses a pressing need for innovative therapeutic options. Here we examined the activity of water-filtered infrared A (wIRA) irradiation against Malassezia. wIRA's antimicrobial and wound healing properties make it an attractive option for localized, non-invasive, and contact-free treatment of superficial skin infections. Irradiation of Malassezia furfur with wIRA (570-1400 nm) resulted in a reduction of the yeast's metabolic activity. When put in contact with immune cells, wIRA-irradiated M. furfur was recovered at lower counts than non-irradiated M. furfur. Likewise, wIRA irradiation of M. furfur put in contact with keratinocytes, the primary host interface of the fungus in the skin, reduced the fungal counts, while the keratinocytes were not affected by the irradiation. The combination of wIRA with the photosensitizer methyl aminolevulinate exerted an additional antifungal effect on M. furfur, irrespective of the presence or absence of keratinocytes, suggesting an enhancement of the treatment effect when used in combination. These findings suggest that wIRA holds promise as a potential therapy for skin disorders associated with Malassezia.

Segmentation and quantitative analysis of optical coherence tomography (OCT) images of laser burned skin based on deep learning

Evaluation of skin recovery is an important step in the treatment of burns. However, conventional methods only observe the surface of the skin and cannot quantify the injury volume. Optical coherence tomography (OCT) is a non-invasive, non-contact, real-time technique. Swept source OCT uses near infrared light and analyzes the intensity of light echo at different depths to generate images from optical interference signals. To quantify the dynamic recovery of skin burns over time, laser induced skin burns in mice were evaluated using deep learning of Swept source OCT images. A laser-induced mouse skin thermal injury model was established in thirty Kunming mice, and OCT images of normal and burned areas of mouse skin were acquired at day 0, day 1, day 3, day 7, and day 14 after laser irradiation. This resulted in 7000 normal and 1400 burn B-scan images which were divided into training, validation, and test sets at 8:1.5:0.5 ratio for the normal data and 8:1:1 for the burn data. Normal images were manually annotated, and the deep learning U-Net model (verified with PSPNe and HRNet models) was used to segment the skin into three layers: the dermal epidermal layer, subcutaneous fat layer, and muscle layer. For the burn images, the models were trained to segment just the damaged area. Three-dimensional reconstruction technology was then used to reconstruct the damaged tissue and calculate the damaged tissue volume. The average IoU value and f-score of the normal tissue layer U-Net segmentation model were 0.876 and 0.934 respectively. The IoU value of the burn area segmentation model reached 0.907 and f-score value reached 0.951. Compared with manual labeling, the U-Net model was faster with higher accuracy for skin stratification. OCT and U-Net segmentation can provide rapid and accurate analysis of tissue changes and clinical guidance in the treatment of burns.

Photothermal therapy: a novel potential treatment for prostate cancer

Prostate cancer (PCa) is a leading cause of cancer-related death in men, and most PCa patients treated with androgen deprivation therapy will progress to metastatic castration-resistant prostate cancer (mCRPC) due to the lack of efficient treatment. Recently, lots of research indicated that photothermal therapy (PTT) was a promising alternative that provided an accurate and efficient prostate cancer therapy. A photothermic agent (PTA) is a basic component of PPT and is divided into organic and inorganic PTAs. Besides, the combination of PTT and other therapies, such as photodynamic therapy (PDT), immunotherapy (IT), chemotherapy (CT), etc., provides an more efficient strategy for PCa therapy. Here, we introduce basic information about PTT and summarize the PTT treatment strategies for prostate cancer. Based on recent works, we think the combination of PPT and other therapies provides a novel possibility for PCa, especially CRPC clinical treatment.

Planar-structured thiadiazoloquinoxaline-based NIR-II dye for tumor phototheranostics

Second near-infrared (NIR-II) fluorescence imaging shows huge application prospects in clinical disease diagnosis and surgical navigation, while it is still a big challenge to exploit high performance NIR-II dyes with long-wavelength absorption and high fluorescence quantum yield. Herein, based on planar π-conjugated donor-acceptor-donor systems, three NIR-II dyes (TP-DBBT, TP-TQ1, and TP-TQ2) were synthesized with bulk steric hindrance, and the influence of acceptor engineering on absorption/emission wavelengths, fluorescence efficiency and photothermal properties was systematically investigated. Compared with TP-DBBT and TP-TQ2, the TP-TQ1 based on 6,7-diphenyl-[1,2,5]thiadiazoloquinoxaline can well balance absorption/emission wavelengths, NIR-II fluorescence brightness and photothermal effects. And the TP-TQ1 nanoparticles (NPs) possess high absorption ability at a peak absorption of 877 nm, with a high relative quantum yield of 0.69% for large steric hindrance hampering the close π-π stacking interactions. Furthermore, the TP-TQ1 NPs show a desirable photothermal conversion efficiency of 48% and good compatibility. In vivo experiments demonstrate that the TP-TQ1 NPs can serve as a versatile theranostic agent for NIR-II fluorescence/photoacoustic imaging-guided tumor phototherapy. The molecular planarization strategy provides an approach for designing efficient NIR-II fluorophores with extending absorption/emission wavelength, high fluorescence brightness, and outstanding phototheranostic performance.

Low-Level Laser Therapy for Allergic Rhinitis: A Systematic Review and Meta-Analysis

INTRODUCTION

Allergic rhinitis (AR) is a common allergic disorder that impairs social and physical functioning as well as quality of life. It is characterized by sneezing, rhinorrhea, congestion, and itching which respond suboptimally to drug therapy. Low-level laser therapy (LLLT) has anti-inflammatory and immunosuppressive properties that have shown promise in some studies. We aimed to systematically review LLLT's effectiveness in treating AR and meta-analyze our findings.

METHODS

A systematic search of PubMed, Scopus, and Web of Science was conducted on November 24, 2023. All studies investigating LLLT on AR were included, and a pre-post meta-analysis of nasal symptoms (rhinorrhea, nasal congestion, nasal itching, and sneezing) in the LLLT-treated arm was conducted. Rhinoconjunctivitis quality of life questionnaire (RQLQ) scores before and after LLLT were also meta-analyzed alongside a pairwise meta-analysis of LLLT with placebo, acupuncture, steroids/antihistamines, and ultraviolet lasers. A random-effects model was used with a conservative pre-post correlation of 0.4 and standardized mean difference (SMD) as the effect size.

RESULTS

Sixteen studies were included in this review, and we found that nasal symptoms are alleviated post-LLLT in people with AR (SMD: -1.4, 95 CI: [-2.07 to -1.13], p value <0.001). RQLQ scores were also reduced after LLLT (SMD = -0.72, 95 CI: [-0.94 to -0.50], p value <0.001), and very few adverse events were reported. This meta-analysis, however, had significant publication bias and heterogeneity. When compared to a placebo, LLLT did not significantly improve nasal symptoms (SMD: -0.69, p value = 0.167), which might mean the post-LLLT nasal symptom alleviation is due to a placebo effect. Comparisons to other treatment modalities were too few to deduce anything meaningful, although it does appear that LLLT is less effective than UV lasers.

CONCLUSION

LLLT is most likely effective at alleviating nasal symptomology and has a low likelihood of adverse event incidence, yet more high-quality studies with larger sample sizes are needed to compare LLLT to a placebo to ensure its superiority to the placebo effect, as well as non-inferiority clinical trials to compare it to standard treatments.

In vitro evaluation of bactericidal effects of fluorescent light energy on Staphylococcus pseudintermedius and S. aureus

BACKGROUND

Staphylococcus pseudintermedius and S. aureus are bacterial species of importance in veterinary medicine. The increasing incidence of antibiotic resistance necessitates the implementation of novel treatment modalities. Fluorescent light energy (FLE) is used as an adjunctive and primary treatment for canine pyoderma. However, no in vitro studies exist investigating its bactericidal effects against S. pseudintermedius or S. aureus.

OBJECTIVES

To determine the bactericidal effects of FLE on S. pseudintermedius and S. aureus isolates.

MATERIALS AND METHODS

Two meticillin-susceptible S. pseudintermedius (MSSP) isolates, three meticillin-resistant S. pseudintermedius (MRSP) isolates and one meticillin-resistant S. aureus (MRSA) isolate were studied. A commercially available blue light-emitting diode (bLED) lamp and photoconverting hydrogel FLE system was used. All bacteria were exposed to five conditions following inoculation: (i) no treatment (control); (ii) blue light (bLED) once; (iii) bLED twice consecutively; (iv) FLE (bLED and photoconverting hydrogel) once; and (v) FLE (bLED and photoconverting hydrogel) twice consecutively. Each individual exposure was 2 min long.

RESULTS

No statistically significant differences (p < 0.05) were found for any treatment group when each bacterial isolate was evaluated individually, MSSP isolates were grouped, MRSP isolates were grouped, when all S. pseudintermedius isolates were combined, or when all isolates of both Staphylococcus species were combined.

CONCLUSIONS AND CLINICAL RELEVANCE

While clinical success is reported when using FLE to treat Staphylococcus infections in animals, no in vitro antibacterial efficacy was identified for S. pseudintermedius or S. aureus under experimental conditions. The clinical success observed with FLE may be the result of a more complex in vivo response.

3D printing by stereolithography using thermal initiators

Additive manufacturing technologies based on stereolithography rely on initiating spatial photopolymerization by using photoinitiators activated by UV-visible light. Many applications requiring printing in water are limited since water-soluble photoinitiators are scarce, and their price is skyrocketing. On the contrary, thermal initiators are widely used in the chemical industry for polymerization processes due to their low cost and simplicity of initiation by heat at low temperatures. However, such initiators were never used in 3D printing technologies, such as vat photopolymerization stereolithography, since localizing the heat at specific printing voxels is impossible. Here we propose using a thermal initiator for 3D printing for localized polymerization processes by near-infrared and visible light irradiation without conventional photoinitiators. This is enabled by using gold nanorods or silver nanoparticles at very low concentrations as photothermal converters in aqueous and non-aqueous mediums. Our proof of concept demonstrates the fabrication of hydrogel and polymeric objects using stereolithography-based 3D printers, vat photopolymerization, and two-photon printing.

Correlation analysis between texture features and elasticity of skin hyperspectral images in the near-infrared band

BACKGROUND/PURPOSE

Skin elasticity was used to evaluate healthy and diseased skin. Correlation analysis between image texture characteristics and skin elasticity was performed to study the feasibility of assessing skin elasticity using a non-contact method.

MATERIALS AND METHODS

Skin images in the near-infrared band were acquired using a hyperspectral camera, and skin elasticity was obtained using a skin elastimeter. Texture features of the mean, standard deviation, entropy, contrast, correlation, homogeneity, and energy were extracted from the acquired skin images, and a correlation analysis with skin elasticity was performed.

RESULTS

The texture features, and skin elasticity of skin images in the near-infrared band had the highest correlation on the side of eye and under of arm, and the mean and correlation were features of texture suitable for distinguishing skin elasticity according to the body part.

CONCLUSION

In this study, we performed elasticity and correlation analyses for various body parts using the texture characteristics of skin hyperspectral images in the near-infrared band, confirming a significant correlation in some body parts. It is expected that this will be used as a cornerstone of skin elasticity evaluation research using non-contact methods.

A comprehensive review on therapeutic potentials of photobiomodulation for neurodegenerative disorders

A series of experimental trials over the past two centuries has put forth Photobiomodulation (PBM) as a treatment modality that utilizes colored lights for various conditions. While in its cradle, PBM was used for treating simple conditions such as burns and wounds, advancements in recent years have extended the use of PBM for treating complex neurodegenerative diseases (NDDs). PBM has exhibited the potential to curb several symptoms and signs associated with NDDs. While several of the currently used therapeutics cause adverse side effects alongside being highly invasive, PBM on the contrary, seems to be broad-acting, less toxic, and non-invasive. Despite being projected as an ideal therapeutic for NDDs, PBM still isn't considered a mainstream treatment modality due to some of the challenges and knowledge gaps associated with it. Here, we review the advantages of PBM summarized above with an emphasis on the common mechanisms that underlie major NDDs and how PBM helps tackle them. We also discuss important questions such as whether PBM should be considered a mainstay treatment modality for these conditions and if PBM's properties can be harnessed to develop prophylactic therapies for high-risk individuals and also highlight important animal studies that underscore the importance of PBM and the challenges associated with it. Overall, this review is intended to bring the major advances made in the field to the spotlight alongside addressing the practicalities and caveats to develop PBM as a major therapeutic for NDDs.

Multispectral Raman Differentiation of Malignant Skin Neoplasms In Vitro: Search for Specific Biomarkers and Optimal Wavelengths

Confocal scanning Raman and photoluminescence (PL) microspectroscopy is a structure-sensitive optical method that allows the non-invasive analysis of biomarkers in the skin tissue. We used it to perform in vitro diagnostics of different malignant skin neoplasms at several excitation wavelengths (532, 785 and 1064 nm). Distinct spectral differences were noticed in the Raman spectra of basal cell carcinoma (BCC) and squamous cell carcinoma (SCC), compared with healthy skin. Our analysis of Raman/PL spectra at the different excitation wavelengths enabled us to propose two novel wavelength-independent spectral criteria (intensity ratios for 1302 cm-1 and 1445 cm-1 bands, 1745 cm-1 and 1445 cm-1 bands), related to the different vibrational "fingerprints" of cell membrane lipids as biomarkers, which was confirmed by the multivariate curve resolution (MCR) technique. These criteria allowed us to differentiate healthy skin from BCC and SCC with sensitivity and specificity higher than 95%, demonstrating high clinical importance in the differential diagnostics of skin tumors.

New Insights into Photobiomodulation of the Vaginal Microbiome-A Critical Review

The development of new technologies such as sequencing has greatly enhanced our understanding of the human microbiome. The interactions between the human microbiome and the development of several diseases have been the subject of recent research. In-depth knowledge about the vaginal microbiome (VMB) has shown that dysbiosis is closely related to the development of gynecologic and obstetric disorders. To date, the progress in treating or modulating the VMB has lagged far behind research efforts. Photobiomodulation (PBM) uses low levels of light, usually red or near-infrared, to treat a diversity of conditions. Several studies have demonstrated that PBM can control the microbiome and improve the activity of the immune system. In recent years, increasing attention has been paid to the microbiome, mostly to the gut microbiome and its connections with many diseases, such as metabolic disorders, obesity, cardiovascular disorders, autoimmunity, and neurological disorders. The applicability of PBM therapeutics to treat gut dysbiosis has been studied, with promising results. The possible cellular and molecular effects of PBM on the vaginal microbiome constitute a theoretical and promising field that is starting to take its first steps. In this review, we will discuss the potential mechanisms and effects of photobiomodulation in the VMB.

Comparison of Wavelength-Dependent Penetration Depth of 532 nm and 660 nm Lasers in Different Tissue Types

Introduction: The depth of laser light penetration into tissue is a critical factor in determining the effectiveness of photodynamic therapy (PDT). However, the optimal laser light penetration depth necessary for achieving maximum therapeutic outcomes in PDT remains unclear. This study aimed to assess the effectiveness of laser light penetration depth at two specific wavelengths, 532 nm and 660 mm. Methods: Chicken and beef of different thicknesses (1, 3, 5, 10, and 20 mm±0.2 mm) were used as in vitro tissue models. The samples were subjected to irradiation by a low-level laser diode of 532 and 660 nm in continuous mode for 10 minutes. with power densities of 167 and 142 J/cm2, respectively. Laser light transmission through the tissue was measured using a power meter. Results: For beef samples, the 660 nm wavelength achieved a maximum transmission intensity of 30.7% at 1 cm thickness, while the 532 nm laser had a transmission intensity of 6.5%. Similarly, in chicken breast samples, the maximum transmission occurred at 1 cm thickness with 68.1% for the 660 nm wavelength and 18.2% for the 532 nm laser. Conclusion: Results consistently demonstrated a significant correlation (P<0.05) between tissue thickness and laser light penetration. Thicker tissues exhibited faster declines in light transmission intensity compared to thinner tissues within 10 minutes. These findings highlight the importance of further research to enhance light delivery in thicker tissues and improve the efficacy of PDT in various medical conditions.

Photobiomodulation at Defined Wavelengths Regulates Mitochondrial Membrane Potential and Redox Balance in Skin Fibroblasts

Starting from the discovery of phototherapy in the beginning of the last century, photobiomodulation (PBM) has been defined in late 1960s and, since then, widely described in different in vitro models. Robust evidence indicates that the effect of light exposure on the oxidative state of the cells and on mitochondrial dynamics, suggesting a great therapeutic potential. The translational scale-up of PBM, however, has often given contrasting and confusing results, mainly due to light exposure protocols which fail to adequately control or define factors such as emitting device features, emitted light characteristics, exposure time, cell target, and readouts. In this in vitro study, we describe the effects of a strictly controlled light-emitting diode (LED)-based PBM protocol on human fibroblasts, one of the main cells involved in skin care, regeneration, and repair. We used six emitter probes at different wavelengths (440, 525, 645, 660, 780, and 900 nm) with the same irradiance value of 0.1 mW/cm2, evenly distributed over the entire surface of the cell culture well. The PBM was analyzed by three main readouts: (i) mitochondrial potential (MitoTracker Orange staining), (ii) reactive oxygen species (ROS) production (CellROX staining); and (iii) cell death (nuclear morphology). The assay was also implemented by cell-based high-content screening technology, further increasing the reliability of the data. Different exposure protocols were also tested (one, two, or three subsequent 20 s pulsed exposures at 24 hr intervals), and the 645 nm wavelength and single exposure chosen as the most efficient protocol based on the mitochondrial potential readout, further confirmed by mitochondrial fusion quantification. This protocol was then tested for its potential to prevent H2O2-induced oxidative stress, including modulation of the light wave frequency. Finally, we demonstrated that the controlled PBM induced by the LED light exposure generates a preconditioning stimulation of the mitochondrial potential, which protects the cell from oxidative stress damage.

Does photobiomodulation on the root surface decrease the occurrence of root resorption in reimplanted teeth? A systematic review of animal studies

This review aimed to answer the following question "Does photobiomodulation treatment of the root surface decrease the occurrence of root resorption in reimplanted teeth?" Electronic searches were performed in the MEDLINE/PubMed, Cochrane Library, Scopus, Web of Science, Embase, and Grey Literature Report databases. Risk of bias was evaluated using SYRCLE Risk of Bias tool. The Grading of Recommendations, Assessment, Development, and Evaluations (GRADE) tool was used to assess the certainty of evidence. In total, 6 studies were included. Five studies reported a reduced occurrence of root resorption in teeth that received photobiomodulation treatment of the root surface prior to replantation. Only 1 study reported contradictory results. The photobiomodulation parameters varied widely among studies. GRADE assessment showed a low certainty of evidence. It can be inferred that photobiomodulation treatment of the root surface prior to replantation of teeth can reduce the occurrence of root resorption. Nonetheless, further clinical studies are needed.

Trial Registration

PROSPERO Identifier: CRD42022349891.

The Clinical and Microbiological Effects of LANAP Compared to Scaling and Root Planing Alone in the Management of Periodontal Conditions

The purpose of this study was to evaluate the efficiency of two therapeutic procedures clinically and microbiologically in the management of periodontally affected teeth: scaling and root planing alone and the laser-assisted new attachment procedure (LANAP). Molecular biological determinations of bacterial markers through the polymerase chain reaction (real-time PCR) method with standard PET tests (species-specific DNA probes at a time) were used for the quantification of three of the most important periodontal pathogens (Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, and Treponema denticola). Both nonsurgical periodontal therapies were proven effective in patients with chronic periodontal disease; however, LANAP was associated with a greater reduction in pocket depth and improved clinical outcomes, associated with a significant decrease in the amount of Porphyromonas gingivalis. The clinical results included a decrease in periodontal pocket depth, bleeding on probing, and dental plaque, with LANAP having better overall outcomes than SRP alone. The use of Nd:YAG lasers in LANAP therapy is a safe and effective procedure that is well accepted by patients.

Improved anticancer efficacy of methyl pyropheophorbide-a-incorporated solid lipid nanoparticles in photodynamic therapy

Photodynamic therapy (PDT) is a promising anticancer treatment because it is patient-friendly and non-invasive. Methyl pyropheophorbide-a (MPPa), one of the chlorin class photosensitizers, is a drug with poor aqueous solubility. The purpose of this study was to synthesize MPPa and develop MPPa-loaded solid lipid nanoparticles (SLNs) with improved solubility and PDT efficacy. The synthesized MPPa was confirmed ¹H nuclear magnetic resonance (¹H-NMR) spectroscopy and UV-Vis spectroscopy. MPPa was encapsulated in SLN via a hot homogenization with sonication. Particle characterization was performed using particle size and zeta potential measurements. The pharmacological effect of MPPa was evaluated using the 1,3-diphenylisobenzofuran (DPBF) assay and anti-cancer effect against HeLa and A549 cell lines. The particle size and zeta potential ranged from 231.37 to 424.07 nm and - 17.37 to - 24.20 mV, respectively. MPPa showed sustained release from MPPa-loaded SLNs. All formulations improved the photostability of MPPa. The DPBF assay showed that SLNs enhanced the ¹O₂ generation from MPPa. In the photocytotoxicity analysis, MPPa-loaded SLNs demonstrated cytotoxicity upon photoirradiation but not in the dark. The PDT efficacy of MPPa improved following its entrapment in SLNs. This observation suggests that MPPa-loaded SLNs are suitable for the enhanced permeability and retention effect. Together, these results demonstrate that the developed MPPa-loaded SLNs are promising candidates for cancer treatment using PDT.

Electronic textiles: New age of wearable technology for healthcare and fitness solutions

Sedentary lifestyles and evolving work environments have created challenges for global health and cause huge burdens on healthcare and fitness systems. Physical immobility and functional losses due to aging are two main reasons for noncommunicable disease mortality. Smart electronic textiles (e-textiles) have attracted considerable attention because of their potential uses in health monitoring, rehabilitation, and training assessment applications. Interactive textiles integrated with electronic devices and algorithms can be used to gather, process, and digitize data on human body motion in real time for purposes such as electrotherapy, improving blood circulation, and promoting wound healing. This review summarizes research advances on e-textiles designed for wearable healthcare and fitness systems. The significance of e-textiles, key applications, and future demand expectations are addressed in this review. Various health conditions and fitness problems and possible solutions involving the use of multifunctional interactive garments are discussed. A brief discussion of essential materials and basic procedures used to fabricate wearable e-textiles are included. Finally, the current challenges, possible solutions, opportunities, and future perspectives in the area of smart textiles are discussed.

Cytotoxic Effects of Combinative ZnPcS4 Photosensitizer Photodynamic Therapy (PDT) and Cannabidiol (CBD) on a Cervical Cancer Cell Line

The most prevalent type of gynecological malignancy globally is cervical cancer (CC). Complicated by tumor resistance and metastasis, it remains the leading cause of cancer deaths in women in South Africa. Early CC is managed by hysterectomy, chemotherapy, radiation, and more recently, immunotherapy. Although these treatments provide clinical benefits, many patients experience adverse effects and secondary CC spread. To minimize this, novel and innovative treatment methods need to be investigated. Photodynamic therapy (PDT) is an advantageous treatment modality that is non-invasive, with limited side effects. The Cannabis sativa L. plant isolate, cannabidiol (CBD), has anti-cancer effects, which inhibit tumor growth and spread. This study investigated the cytotoxic combinative effect of PDT and CBD on CC HeLa cells. The effects were assessed by exposing in vitro HeLa CC-cultured cells to varying doses of ZnPcS₄ photosensitizer (PS) PDT and CBD, with a fluency of 10 J/cm² and 673 nm irradiation. HeLa CC cells, which received the predetermined lowest dose concentrations (ICD₅₀) of 0.125 µM ZnPcS₄ PS plus 0.5 µM CBD to yield 50% cytotoxicity post-laser irradiation, reported highly significant and advantageous forms of cell death. Flow cytometry cell death pathway quantitative analysis showed that only 13% of HeLa cells were found to be viable, 7% were in early apoptosis and 64% were in late favorable forms of apoptotic cell death, with a minor 16% of necrosis post-PDT. Findings suggest that this combined treatment approach can possibly induce primary cellular destruction, as well as limit CC metastatic spread, and so warrants further investigation.

Photobiomodulation Controls Keratinocytes Inflammatory Response through Nrf2 and Reduces Langerhans Cells Activation

Photobiomodulation (PBM) is rapidly gaining traction as a valuable tool in dermatology for treating many inflammatory skin conditions using low levels of visible light or near-infrared radiation. However, the physiological regulatory pathways responsible for the anti-inflammatory effect of PBM have not been well defined. Since previous studies showed that nuclear factor-erythroid 2 like 2 (Nrf2) is a master regulator of the skin inflammatory response, we have addressed its role in controlling inflammation by PBM. Primary human keratinocytes (KCs) stimulated with 2,4-dinitrochlorobenzene (DNCB) to mimic pro-inflammatory stress were illuminated with two wavelengths: 660 nm or 520 nm. Both lights significantly reduced the mRNA expression of the DNCB-triggered TNF-α, IL-6, and IL-8 cytokines in KCs, while they enhanced Nrf2 pathway activation. PBM-induced Nrf2 is a key regulator of the inflammatory response in KCs since its absence abolished the regulatory effect of light on cytokines production. Further investigations of the mechanisms contributing to the immunoregulatory effect of PBM in inflamed human skin explants showed that 660 nm light prevented Langerhans cells migration into the dermis, preserving their dendricity, and decreased pro-inflammatory cytokine production compared to the DNCB-treated group. This study is the first to report that the PBM-mediated anti-inflammatory response in KCs is Nrf2-dependent and further support the role of PBM in skin immunomodulation. Therefore, PBM should be considered a promising alternative or complementary therapeutic approach for treating skin-related inflammatory diseases.

The antibacterial activity of photodynamic agents against multidrug resistant bacteria causing wound infection

Antimicrobial photodynamic inactivation (aPDI) of multidrug-resistant (MDR) wound pathogens was evaluated with cationic porphyrin derivatives (CPDs). MDR bacterial strains including Pseudomonas aeruginosa, Escherichia coli, Acinetobacter baumannii, and Klebsiella pneumoniae were used. The CPDs named PM, PE, PN, and PL were synthesized as a photosensitizer (PS). A diode laser with a wavelength of 655 nm was used as a light source. aPDI of the combinations formed with different energy densities (50, 100, and 150 J/cm²) and PS concentrations (ranging from 3.125 to 600 µM) were evaluated on each bacterial strain. Dark toxicity, cytotoxicity, and phototoxicity were determined on fibroblast cells. In the aPDI groups, survival reductions of up to 5.80 log₁₀ for E. coli, 5.90 log₁₀ for P. aeruginosa, 6.11 log₁₀ for K. pneumoniae, and 6.78 log₁₀ for A. baumannii were obtained. The cytotoxic effect of PL and PM on fibroblast cells was very limited. PN was the type of CPD with the highest dark toxicity on fibroblast cells. In terms of providing broad-spectrum aPDI without or with very limited cytotoxic effect, the best result was observed in aPDI application with PL. The other CPDs need some modifications to show bacterial selectivity for use at 50 µM and above.

The efficacy of LED microneedle patch on hair growth in mice

Light penetration depth in the scalp is a key limitation of low-level light therapy for the treatment of androgenetic alopecia (AGA). A novel light emitting diode (LED) microneedle patch was designed to achieve greater efficacy by enhancing the percutaneous light delivery. The study aimed to investigate the efficacy and safety of this device on hair growth in mice. Thirty-five male C57BL/6 mice which their dorsal skin was split into upper and lower parts to receive either LED irradiation alone or LED irradiation with a microneedle patch. Red (629 nm), green (513 nm), and blue light (465 nm) at an energy dose of 0.2 J/cm² were applied once daily for 28 days. Outcomes were evaluated weekly using digital photographs. Histopathological findings were assessed using a 6 mm punch biopsy. A significant increase in hair growth was observed in the green light, moderate in the red light, and the lowest in the blue light group. The addition of the microneedle patch to LED irradiation enhanced greater and faster anagen entry in all the groups. Histopathology showed an apparent increase in the number of hair follicles, collagen bundles in the dermis, angiogenesis, and mononuclear cell infiltration after treatment with the green-light LED microneedle patches. No serious adverse effects were observed during the experiment. Our study provides evidence that the newly developed green-light LED microneedle patch caused the optimal telogen-to-anagen transition and could lead to new approaches for AGA. Microneedle stimulation may aid percutaneous light delivery to the target hair follicle stem cells.

Sodium Hypochlorite and Diode Laser in Non-Surgical Treatment of Periodontitis: Clinical and Bacteriological Study with Real Time Polymerase Chain Reaction (PCR)

Increasing the disinfection during non-surgical treatment of periodontitis is primordial. This study assesses the effectiveness of sodium hypochlorite and a 980 nm diode laser in non-surgical treatment of periodontitis. Thirty sites of localized periodontitis with a probing pocket depth (PPD) of ≥ 6 mm were included. Fifteen underwent scaling root planing (SRP group) and 15 underwent SRP + 0.5% NaOCl and a 980 nm diode laser (study group). A biological molecular test and real time polymerase chain reaction (RT-PCR) were performed before (T0) and after intervention (T1). Total bacterial count and counts of Porphyromonas gingivalis, Treponema denticola, Tannerella forsythia, Prevotella intermedia, Peptostreptococcus micros, Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans, Eubacterium nodatum, Capnocytophaga gingivalis were assessed. Plaque index (PI), bleeding on probing (BOP), gingival recession (GR), PPD and clinical attachment loss (CAL) were evaluated at T0, and 3 and 6 months after. Study group showed a statistically significant reduction of TBC (5.66 × 10⁸ CFU/mL) compared to SRP (6.2 × 10⁹ CFU/mL). Both groups showed a statistically significant reduction of Treponema denticola, Tannerella forsythia, Prevotella intermedia, Peptostrep. (micromonas) micros and Fusobacterium nucleatum; however, a significant reduction of Eubacterium nodatum and Capnocytophaga gingivalis was observed in the study group. At T6, both groups had a statistically significant reduction of PI, BOP, GR, PD and CAL. The study group showed more GR compared to SRP and a significant reduction of PD (4.03 mm ± 0.49) compared to SRP (5.28 mm ± 0.67). This study reveals that NaOCl and a diode laser are effective as an adjunctive to the non-surgical treatment of periodontitis.

Application of Fibrin Associated with Photobiomodulation as a Promising Strategy to Improve Regeneration in Tissue Engineering: A Systematic Review

Fibrin, derived from proteins involved in blood clotting (fibrinogen and thrombin), is a biopolymer with different applications in the health area since it has hemostasis, biocompatible and three-dimensional physical structure properties, and can be used as scaffolds in tissue regeneration or drug delivery system for cells and/or growth factors. Fibrin alone or together with other biomaterials, has been indicated for use as a biological support to promote the regeneration of stem cells, bone, peripheral nerves, and other injured tissues. In its diversity of forms of application and constitution, there are platelet-rich fibrin (PRF), Leukocyte- and platelet-rich fibrin (L-PRF), fibrin glue or fibrin sealant, and hydrogels. In order to increase fibrin properties, adjuvant therapies can be combined to favor tissue repair, such as photobiomodulation (PBM), by low-level laser therapy (LLLT) or LEDs (Light Emitting Diode). Therefore, this systematic review aimed to evaluate the relationship between PBM and the use of fibrin compounds, referring to the results of previous studies published in PubMed/MEDLINE, Scopus and Web of Science databases. The descriptors “fibrin AND low-level laser therapy” and “fibrin AND photobiomodulation” were used, without restriction on publication time. The bibliographic search found 44 articles in PubMed/MEDLINE, of which 26 were excluded due to duplicity or being outside the eligibility criteria. We also found 40 articles in Web of Science and selected 1 article, 152 articles in Scopus and no article selected, totaling 19 articles for qualitative analysis. The fibrin type most used in combination with PBM was fibrin sealant, mainly heterologous, followed by PRF or L-PRF. In PBM, the gallium-aluminum-arsenide (GaAlAs) laser prevailed, with a wavelength of 830 nm, followed by 810 nm. Among the preclinical studies, the most researched association of fibrin and PBM was the use of fibrin sealants in bone or nerve injuries; in clinical studies, the association of PBM with medication-related treatments osteonecrosis of the jaw (MRONJ). Therefore, there is scientific evidence of the contribution of PBM on fibrin composites, constituting a supporting therapy that acts by stimulating cell activity, angiogenesis, osteoblast activation, axonal growth, anti-inflammatory and anti-edema action, increased collagen synthesis and its maturation, as well as biomolecules.

Evaluation of the safety and efficacy of long pulsed Nd: YAG laser in the treatment of vascular lesions in vivo

Long-pulsed neodymium:yttrium-aluminum-garnet (Nd:YAG) lasers have recently been used for the treatment of vascular lesions refractory to conventional vascular lasers. The aim of this study was to evaluate the clinical efficacy and safety of long-pulsed Nd:YAG laser treatment for vascular disorders. Laser irradiation was performed using two approaches: the 532 nm Nd:YAG laser was used to irradiate the dorsal skin fold in mice and the 1064 nm Nd:YAG laser was used to irradiate the leg of mice without skin incision. The specimens were observed immediately after laser treatment using a laser Doppler perfusion imaging system. Red blood cell (RBC) extravasation and hemorrhage were observed using the hematoxylin and eosin stain. The diameter of blood vessel under 30 μm was disrupted with a laser pulse at a fluence of 12 J/cm² and a wavelength of 532 nm regardless of pulse duration. The veins and arteries of approximately 1 mm in size were ablated with laser pulses at a fluence of 140 J/cm² and above and a wavelength of 1064 nm. Selective photopyrolysis can be achieved with either 532- or 1064 nm Nd:YAG laser pulses in vascular diseases based on the depth and size of the vessel.

Blue light induces skin apoptosis and degeneration through activation of the endoplasmic reticulum stress-autophagy apoptosis axis: Protective role of hydrogen sulfide

Research on the phototoxicity of blue light (BL) to the skin is increasing. Although blue light can induce oxidative stress, inflammation, and inhibition of proliferation in skin cells, the mechanism by which blue light damages the skin is not yet clear. Endoplasmic reticulum (ER) stress and autophagy are two mechanisms by which cells resist external interference factors and maintain cell homeostasis and normal function, and both can affect cell apoptosis. Interestingly, we have found that blue light (435 nm ~ 445 nm, 8000 lx, 6-24 h)-induced oxidative stress triggers the ER stress-CHOP (C/EBP homologous protein) signal and affects the protein levels of B-cell lymphoma-2 (Bcl-2) and Bcl2-associated X (Bax), thereby promoting apoptosis. In addition, blue light activates autophagy in skin cells, which intensifies cell death. When ER stress is inhibited, autophagy is subsequently inhibited, suggesting that blue light-induced autophagy is influenced by ER stress. These evidences suggest that blue light induces activation of reactive oxygen species (ROS)-ER stress-autophagy-apoptosis axis signaling, which further induces skin injury and apoptosis. This is the first report on the relationships among oxidative stress, ER stress, autophagy, and apoptosis in blue light-induced skin injury. Furthermore, we have studied the effect of hydrogen sulfide (H₂S) on blue light-induced skin damage, and found that exogenous H₂S can protect skin from blue light-induced damage by regulating the ROS-ER stress-autophagy-apoptosis axis. Our data shows that when we are exposed to blue light, such as sunbathing and jaundice treatment, H₂S may be developed as a protective agent.

Localised light delivery on melanoma cells using optical microneedles

Light-based therapy is an emerging treatment for skin cancer, which has received increased attention due to its drug-free and non-invasive approach. However, the limitation of current light therapy methods is the inability for light to penetrate the skin and reach deep lesions. As such, we have developed a polylactic acid (PLA) microneedles array as a novel light transmission platform to perform in vitro evaluation regarding the effect of light therapy on skin cancer. For the first time, we designed and fabricated a microneedle array system with a height fixation device that can be installed in a cell culture dish and an LED array for blue light irradiation. The effect of the blue light combined with the microneedles on cell apoptosis was evaluated using B16F10 melanoma cells and analyzed by Hoechst staining. Our results demonstrate that blue light can be transmitted by microneedles to skin cells and effectively affect cell viability.

Effects of 445 nm, 520 nm, and 638 nm Laser Irradiation on the Dermal Cells

Background: The invention of non-ionizing emission devices revolutionized science, medicine, industry, and the military. Currently, different laser systems are commonly used, generating the potential threat of excessive radiation exposure, which can lead to adverse health effects. Skin is the organ most exposed to laser irradiation; therefore, this study aims to evaluate the effects of 445 nm, 520 nm, and 638 nm non-ionizing irradiation on keratinocytes and fibroblasts. Methods: Keratinocytes and fibroblasts were exposed to a different fluency of 445 nm, 520 nm, and 638 nm laser irradiation. In addition, viability, type of cell death, cell cycle distribution, and proliferation rates were investigated. Results: The 445 nm irradiation was cytotoxic to BJ-5ta (≥58.7 J/cm²) but not to Ker-CT cells. Exposure influenced the cell cycle distribution of Ker-CT (≥61.2 J/cm²) and BJ-5ta (≥27.6 J/cm²) cells, as well as the Bj-5ta proliferation rate (≥50.5 J/cm²). The 520 nm irradiation was cytotoxic to BJ-5ta (≥468.4 J/cm²) and Ker-CT (≥385.7 J/cm²) cells. Cell cycle distribution (≥27.6 J/cm²) of Ker-CT cells was also affected. The 638 nm irradiation was cytotoxic to BJ-5ta and Ker-CT cells (≥151.5 J/cm²). The proliferation rate and cell cycle distribution of BJ-5ta (≥192.9 J/cm²) and Ker-CT (13.8 and 41.3 J/cm²) cells were also affected. Conclusions: At high fluences, 455 nm, 520 nm, and 638 nm irradiation, representing blue, green, and red light spectra, are hazardous to keratinocytes and fibroblasts. However, laser irradiation may benefit the cells at low fluences by modulating the cell cycle and proliferation rate.

Recent Advances on Carbon Monoxide Releasing Molecules for Antibacterial Applications

Carbon monoxide (CO) has been known as an endogenous signaling molecule in addition to an air pollutant. It plays a critical role in many physiological and pathological processes. Therefore, CO has been recognized as a potent therapeutic agent for the treatment of numerous diseases such as cancers, rheumatoid arthritis, and so on. Instead of direct CO inhalation, two main categories of CO-releasing molecules (CORMs) (i. e., metal carbonyls and nonmetallic CO donors) have been developed to safely and locally deliver CO to target tissues. In this minireview, we summarize the recent achievements of CORMs on antibacterial applications. It appears that the antibacterial activity of CORMs is different from CO gas, which is tightly correlated to not only the types of CORMs applied but also the tested bacterial strains. In some circumstances, the antibacterial mechanisms are debated and need to be clarified. We hope more attention can be paid to this emerging field and new antibacterial agents with a low risk of drug resistance can be developed.

Oleogel Formulations for the Topical Delivery of Betulin and Lupeol in Skin Injuries-Preparation, Physicochemical Characterization, and Pharmaco-Toxicological Evaluation

The skin integrity is essential due to its pivotal role as a biological barrier against external noxious factors. Pentacyclic triterpenes stand as valuable plant-derived natural compounds in the treatment of skin injuries due to their anti-inflammatory, antioxidant, antimicrobial, and healing properties. Consequently, the primary aim of the current investigation was the development as well as the physicochemical and pharmaco-toxicological characterization of betulin- and lupeol-based oleogels (Bet OG and Lup OG) for topical application in skin injuries. The results revealed suitable pH as well as organoleptic, rheological, and textural properties. The penetration and permeation of Bet and Lup oleogels through porcine ear skin as well as the retention of both oleogels in the skin were demonstrated through ex vivo studies. In vitro, Bet OG and Lup OG showed good biocompatibility on HaCaT human immortalized cells. Moreover, Bet OG exerted a potent wound-healing property by stimulating the migration of the HaCaT cells. The in ovo results demonstrated the non-irritative potential of the developed formulations. Additionally, the undertaken in vivo investigation indicated a positive effect of oleogels treatment on skin parameters by increasing skin hydration and decreasing erythema. In conclusion, oleogel formulations are ideal for the local delivery of betulin and lupeol in skin disorders.