Procoagulant and Antimicrobial Effects of Chitosan in Wound Healing

Evaluation of the effects of Andiz extract on the experimentally wound in rats by microbiological and gene expression methods

OBJECTIVES

This study aimed to investigate the effects of andiz extract on wound healing and compare it with saline and chlorhexidine gluconate. Microbial DNA load was used to evaluate its antibacterial effects, and gene expression methods were used to assess its contribution to cytokine release and wound healing.

METHODS AND RESULTS

A standardized wound site was created with a 3 mm diameter punch on 32 male Wistar albino rats. The rats were divided into four groups: Control (n = 5), Saline (n = 9), Chlorhexidine gluconate (n = 9), and Andiz extract (n = 9). Five rats in the control group were euthanised without any treatment. Irrigations of the Saline, Chlorhexidine, and Extract groups were provided regularly. After the tissue samples were taken in the 1st week, 2nd week, and 3rd week, three rats were euthanized each week for each group. The total bacterial DNA load on the samples taken was determined by a nano spectrophotometer. β-actin was chosen as housekeeping, and target gene primers were created for TGF-β and IL-1β. Expression amounts of target genes were measured by Real-Time PCR with the application of the created primers. There is a significant difference between the Extract group and the other groups regarding total bacterial DNA load. The whole bacterial load was 185% less than the initial values. TGF-β and IL-1β genes evaluated regarding gene expression were measured at the highest value in the Extract group.

CONCLUSIONS

This study showed the antibacterial effects of the Extract and its positive contributions to wound healing.

Polylactic acid/chitosan-IKVAV Janus film serving as a dual functional platform for spinal cord injury repair

The repair of traumatic spinal cord injury (SCI) remains a challenge due to the non-regenerative nature of functional neurons in adults. Neural stem cell (NSC)-based therapy has emerged as a promising approach for the treatment of SCI by replacing the damaged neurons with differentiated stem cells. However, directing the neuronal differentiation of implanted stem cells in the injury microenvironment is of great difficulty, especially considering that SCI is generally associated with severe fibrotic tissue infiltration, neuron inflammation, and tissue adhesion. Here, we propose a dual functional Janus film capable of preventing tissue adhesion and promoting the neuronal differentiation of stem cells for the treatment of SCI. The Janus film is composed of a layer of polylactic acid (PLA) and a layer of chitosan (CS) grafted with IKVAV peptides. The PLA layer prevents the invasion of the fibrotic tissue, while the IKVAV peptide-grafted CS layer offers support for NSC implantation and thus the neuronal differentiation of the NSCs. When serving as the dura patch, the Janus films seeded with NSCs promote the recovery of motor function and the regeneration of the injured spinal cord tissue of SCI rats. This dual functional Janus film holds great promise for treating SCI in combination with stem cell therapy.

Chitosan-Based Nanoformulations: Preclinical Investigations, Theranostic Advancements, and Clinical Trial Prospects for Targeting Diverse Pathologies

Chitosan, a biocompatible and biodegradable polymer, has attracted significant interest in the development of nanoformulations for targeted drug delivery and therapeutic applications. The versatility of chitosan lies in its modifiable functional groups, which can be tailored to diverse applications. Nanoparticles derived from chitosan and its derivatives typically exhibit a positive surface charge and mucoadhesive properties, enabling them to adhere to negatively charged biological membranes and gradually release therapeutic agents. This comprehensive review investigates the manifold roles of chitosan-based nanocarriers, ranging from preclinical research to theranostic applications and clinical trials, across a spectrum of diseases, including neurological disorders, cardiovascular diseases, cancer, wound healing, gastrointestinal disorders, and pulmonary diseases. The exploration starts with an overview of preclinical studies, emphasizing the potential of chitosan-based nanoformulations in optimizing drug delivery, improving therapeutic outcomes, and mitigating adverse effects in various disease categories. Advancements in theranostic applications of chitosan-based nanoformulations highlight their adaptability to diverse diseases. As these nanoformulations progress toward clinical translation, this review also addresses the regulatory challenges associated with their development and proposes potential solutions.

Novel Functional Dressing Materials for Intraoral Wound Care

Intraoral wounds represent a particularly challenging category of mucosal and hard tissue injuries, characterized by the unique structures, complex environment, and distinctive healing processes within the oral cavity. They have a common occurrence yet frequently inflict significant inconvenience and pain on patients, causing a serious decline in the quality of life. A variety of novel functional dressings specifically designed for the moist and dynamic oral environment have been developed and realized accelerated and improved wound healing. Thoroughly analyzing and summarizing these materials is of paramount importance in enhancing the understanding and proficiently managing intraoral wounds. In this review, the particular processes and unique characteristics of intraoral wound healing are firstly described. Up-to-date knowledge of various forms, properties, and applications of existing products are then intensively discussed, which are categorized into animal products, plant extracts, natural polymers, and synthetic products. To conclude, this review presents a comprehensive framework of currently available functional intraoral wound dressings, with an aim to provoke inspiration of future studies to design more convenient and versatile materials.

The renoprotective activity of amikacin-gamma-amino butyric acid-chitosan nanoparticles: a comparative study

The development of nanoparticles (NPs) with active components with upgraded stability, and prolonged release helps in enhanced tissue regeneration. In addition, NPs are feasible strategy to boost antibiotic effectiveness and reduce drug side effects. Our study focuses on the use of amikacin (AMK) and gamma amino butyric acid (GABA) unloaded combinations or loaded on chitosan nanoparticles (CSNPs) for kidney protection. The AMK-GABA-CSNPs were prepared with the ionic gelation method, the morphology was studied using transmission electron microscopy (TEM), zetasizer and the Fourier transform-infrared spectroscopy (FT-IR) spectrum of the synthesized NPs was observed. The average size of AMK-GABA-CSNPs was 77.5 ± 16.5 nm. Zeta potential was + 38.94 ± 2.65 mV. AMK-GABA-CSNPs revealed significant in vitro antioxidant, anti-coagulation, non-hemolytic properties and good cell compatibility. To compare the effects of the unloaded AMK-GABA combination and AMK-GABA-CSNPs on the renal tissue, 42 healthy Sprague-Dawley rats were divided into seven groups. G1: normal control (NC), normal saline; G2: low-dose nephrotoxic group (LDN), AMK (20 mg/kg/day; i.p.); G3: unloaded AMK (20 mg/kg/day; i.p.) and GABA (50 mg/kg/day; i.p.); G4: AMK-GABA-CSNPs (20 mg/kg/day; i.p.); G5: high-dose nephrotoxic group (HDN), AMK (30 mg/kg/day; i.p.); G6: unloaded AMK (30 mg/kg/day; i.p.) and GABA (50 mg/kg/day; i.p.) and G7: AMK-GABA-CSNPs (30 mg/kg/day; i.p.). The results showed that AMK-GABA-CSNPs formulation is superior to unloaded AMK-GABA combination as it ameliorated kidney functions, oxidative stress and displayed a significant homeostatic role via suppression of inflammatory cytokines of Th1, Th2 and Th17 types. Hence, AMK-GABA-CSNPs could afford a potential nano-based therapeutic formula for the management of AMK-nephrotoxicity.

Chitosan-based multifunctional oxygenating antibiotic hydrogel dressings for managing chronic infection in diabetic wounds

Current treatment strategies for infection of chronic wounds often result in compromised healing and necrosis due to antibiotic toxicity, and underlying biomarkers affected by treatments are not fully known. Here, a multifunctional dressing was developed leveraging the unique wound-healing properties of chitosan, a natural polysaccharide known for its numerous benefits in wound care. The dressing consists of an oxygenating perfluorocarbon functionalized methacrylic chitosan (MACF) hydrogel incorporated with antibacterial polyhexamethylene biguanide (PHMB). A non-healing diabetic infected wound model with emerging metabolomics tools was used to explore the anti-infective and wound healing properties of the resultant multifunctional dressing. Direct bacterial bioburden assessment demonstrated superior antibacterial properties of hydrogels over a commercial dressing. However, wound tissue quality analyses confirmed that sustained PHMB for 21 days resulted in tissue necrosis and disturbed healing. Therefore, a follow-up comparative study investigated the best treatment course for antiseptic application ranging from 7 to 21 days, followed by the oxygenating chitosan-based MACF treatment for the remainder of the 21 days. Bacterial counts, tissue assessments, and lipidomics studies showed that 14 days of application of MACF-PHMB dressings followed by 7 days of MACF dressings provides a promising treatment for managing infected non-healing diabetic skin ulcers.

Natural Products with Potential Effects on Hemorrhoids: A Review

Hemorrhoid disease is a common anorectal disorder affecting populations worldwide, with high prevalence, treatment difficulties, and considerable treatment costs. Compared to other treatment options, medical therapy for hemorrhoids offers minimal harm, more dignity to patients, and is more economical. Unfortunately, there are few chemical hemorrhoid medications available clinically, which makes the search for efficacious, cost-effective, and environmentally friendly new medication classes a focal point of research. In this context, searching for available natural products to improve hemorrhoids exhibits tremendous potential. These products are derived from nature, predominantly from plants, with a minor portion coming from animals, fungi, and algae. They have excellent coagulation pathway regulation, anti-inflammatory, antibacterial, and tissue regeneration activities. Therefore, we take the view that they are a class of potential hemorrhoid drugs, prevention products, and medication add-on ingredients. This article first reviews the factors contributing to the development of hemorrhoids, types, primary symptoms, and the mechanisms of natural products for hemorrhoids. Building on this foundation, we screened natural products with potential hemorrhoid improvement activity, including polyphenols and flavonoids, terpenes, polysaccharides, and other types.

Multifunctional antibacterial hydrogels for chronic wound management

Chronic wounds have gradually evolved into a global health challenge, comprising long-term non-healing wounds, local tissue necrosis, and even amputation in severe cases. Accordingly, chronic wounds place a considerable psychological and economic burden on patients and society. Chronic wounds have multifaceted pathogenesis involving excessive inflammation, insufficient angiogenesis, and elevated reactive oxygen species levels, with bacterial infection playing a crucial role. Hydrogels, renowned for their excellent biocompatibility, moisture retention, swelling properties, and oxygen permeability, have emerged as promising wound repair dressings. However, hydrogels with singular functions fall short of addressing the complex requirements associated with chronic wound healing. Hence, current research emphasises the development of multifunctional antibacterial hydrogels. This article reviews chronic wound characteristics and the properties and classification of antibacterial hydrogels, as well as their potential application in chronic wound management.

Biological scaffold as potential platforms for stem cells: Current development and applications in wound healing

Wound repair is a complex challenge for both clinical practitioners and researchers. Conventional approaches for wound repair have several limitations. Stem cell-based therapy has emerged as a novel strategy to address this issue, exhibiting significant potential for enhancing wound healing rates, improving wound quality, and promoting skin regeneration. However, the use of stem cells in skin regeneration presents several challenges. Recently, stem cells and biomaterials have been identified as crucial components of the wound-healing process. Combination therapy involving the development of biocompatible scaffolds, accompanying cells, multiple biological factors, and structures resembling the natural extracellular matrix (ECM) has gained considerable attention. Biological scaffolds encompass a range of biomaterials that serve as platforms for seeding stem cells, providing them with an environment conducive to growth, similar to that of the ECM. These scaffolds facilitate the delivery and application of stem cells for tissue regeneration and wound healing. This article provides a comprehensive review of the current developments and applications of biological scaffolds for stem cells in wound healing, emphasizing their capacity to facilitate stem cell adhesion, proliferation, differentiation, and paracrine functions. Additionally, we identify the pivotal characteristics of the scaffolds that contribute to enhanced cellular activity.

Biomedical Trends in Stimuli-Responsive Hydrogels with Emphasis on Chitosan-Based Formulations

Biomedicine is constantly evolving to ensure a significant and positive impact on healthcare, which has resulted in innovative and distinct requisites such as hydrogels. Chitosan-based formulations stand out for their versatile utilization in drug encapsulation, transport, and controlled release, which is complemented by their biocompatibility, biodegradability, and non-immunogenic nature. Stimuli-responsive hydrogels, also known as smart hydrogels, have strictly regulated release patterns since they respond and adapt based on various external stimuli. Moreover, they can imitate the intrinsic tissues' mechanical, biological, and physicochemical properties. These characteristics allow stimuli-responsive hydrogels to provide cutting-edge, effective, and safe treatment. Constant progress in the field necessitates an up-to-date summary of current trends and breakthroughs in the biomedical application of stimuli-responsive chitosan-based hydrogels, which was the aim of this review. General data about hydrogels sensitive to ions, pH, redox potential, light, electric field, temperature, and magnetic field are recapitulated. Additionally, formulations responsive to multiple stimuli are mentioned. Focusing on chitosan-based smart hydrogels, their multifaceted utilization was thoroughly described. The vast application spectrum encompasses neurological disorders, tumors, wound healing, and dermal infections. Available data on smart chitosan hydrogels strongly support the idea that current approaches and developing novel solutions are worth improving. The present paper constitutes a valuable resource for researchers and practitioners in the currently evolving field.

Functionalized PLGA Microsphere Loaded with Fusion Peptide for Therapy of Bone Defects

The challenges in the treatment of extensive bone defects are infection control and bone regeneration. Bone tissue engineering is currently one of the most promising strategies. In this study, a short biopeptide with specific osteogenic ability is designed by fusion peptide technology and encapsulated with chitosan-modified poly(lactic acid-glycolic acid) (PLGA) microspheres. The fusion peptide (FP) mainly consists of an osteogenic functional sequence (P-15) and a bone-specific binding sequence (Asp-6), which can regulate bone formation accurately and efficiently. Chitosan-modified PLGA with antimicrobial and pro-healing effects is used to achieve the sustained release of fusion peptides. In the early stage, the antimicrobial and soft tissue healing effects can stop the wound infection as soon as possible, which is relevant for the subsequent bone regeneration process. Our data show that CS-PLGA@FP microspheres have antibacterial and pro-cell migration effects in vitro and excellent pro-wound-healing effects in vivo. In addition, CS-PLGA@FP microspheres promote the expression of osteogenic-related factors and show excellent bone regeneration in a rat defect model. Therefore, CS-PLGA@FP microspheres are an efficient biomaterial that can accelerate the recovery of bone defects.

Process optimization and character evaluation of Bletilla striata polysaccharide (BSP) and chitosan (CS) composite hemostatic sponge (BSP-CS)

Bletilla striata polysaccharide (BSP) and chitosan (CS) were chemically cross-linked using oxalyl chloride to prepare a composite hemostatic sponge (BSP-CS), and the process parameters were optimized using the Box-Behnken design (BBD) with response surface methodology. To optimize the performance of the hemostatic sponge, we adjusted the ratio of independent variables, the amount of oxalyl chloride added, and the freeze-dried volume. A series of evaluations were conducted on the hemostatic applicability of BSP-CS. The characterization results revealed that BSP-CS had a stable bacteriostatic effect on Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa within 72 h, and the bacteriostatic rate was above 30%. The CCK-8 cytotoxicity test demonstrated that BSP-CS had a certain effect on promoting cell proliferation of L929 cells. In the mouse tail-cutting experiment, the hemostasis time of BSP-CS was 463.0±38.16 s, shortened by 91.3 s on average compared with 554.3±34.67 s of the gauze group. The blood loss of the BSP-CS group was 28.47±3.74 mg, which was 34.7% lower than that of the control gauze group (43.6±3.83 mg). In the in vitro coagulation experiment, the in vitro coagulation index of the BSP-CS group was 97.29%±1.8%, which was reduced to 8.6% of the control group. The CT value of the BSP-CS group was 240±15 s, which was 155 s lower than that of the gauze group (355±31.22 s). All characterization results indicate that BSP-CS is an excellent hemostatic material.

Pharmaceutical applications of chitosan in skin regeneration: A review

Skin regeneration is the process that restores damaged tissues. When the body experiences trauma or surgical incisions, the skin and tissues on the wound surface become damaged. The body repairs this damage through complex physiological processes to restore the original structural and functional states of the affected tissues. Chitosan, a degradable natural bioactive polysaccharide, has attracted widespread attention partly owing to its excellent biocompatibility and antimicrobial properties; additionally, a modified form of this compound has been shown to promote skin regeneration. This review evaluates the recent research progress in the application of chitosan to promote skin regeneration. First, we discuss the basic principles of the extraction and preparation processes of chitosan from its source. Subsequently, we describe the functional properties of chitosan and the optimization of these properties through modification. We then focus on the existing chitosan-based biomaterials developed for clinical applications and their corresponding effects on skin regeneration, particularly in cases of diabetic and burn wounds. Finally, we explore the challenges and prospects associated with the use of chitosan in skin regeneration. Overall, this review provides a reference for related research and contributes to the further development of chitosan-based products in cutaneous skin regeneration.

Chitosan-Based Biomaterial in Wound Healing: A Review

Wound healing is an evolving and intricate technique that is vital to the restoration of tissue integrity and function. Over the past few decades, chitosan a biopolymer derived from chitin, became known as an emerging biomaterial in the field of healing wounds due to its distinctive characteristics including biocompatibility, biodegradability, affinity to biomolecules, and wound-healing activity. This natural polymer exhibits excellent healing capabilities by accelerating the development of new skin cells, reducing inflammation, and preventing infections. Due to its distinct biochemical characteristics and innate antibacterial activity, chitosan has been extensively researched as an antibacterial wound dressing. Chronic wounds, such as diabetic ulcers and liver disease, are a growing medical problem. Chitosan-based biomaterials are a promising solution in the domain of wound care. The article analyzes the depth of chitosan-based biomaterials and their impact on wound healing and also the methods to enhance the advantages of chitosan by incorporating bioactive compounds. This literature review is aimed to improve the understanding and knowledge about biomaterials and their use in wound healing.

Chitosan for the treatment of inflammation of the oral mucosa: A systematic review

BACKGROUND

Chitosan is a cheap, accessible, nontoxic, biocompatible, and biodegradable compound. Also, this polysaccharide possesses antibacterial and anti-inflammatory properties. Consequently, a wide range of chitosan applications in the dentistry field has been explored. This work aimed to conduct a systematic review to address the clinical efficacy of chitosan for the treatment of oral mucositis.

MATERIAL AND METHODS

The design of the included studies were observational studies, randomized clinical trials (RCT), and non-randomized clinical trials (non-RCT), whereas, a series of cases, in vivo, and in vitro studies were excluded. The search was performed in PubMed, Web of Science, Scopus, Dentistry and Oral Sciences Source, and ClinicalTrials. Gray literature was searched at Google Scholar. Relevant data from all included studies were recorded. The risk of bias (using RoB 2) and the quality (using Grading of Recommendations Assessment, Development, and Evaluation, GRADE) assessments were carried out.

RESULTS

From the 8413 records screened, 5 clinical trials fully met the eligibility criteria, which comprised a total of 192 participants suffering oral lesions and pain related to oral mucositis. 100% of the included studies exhibited a high risk of bias. The quality of the studies was between low and very low.

CONCLUSIONS

The results of the included studies suggest that chitosan can diminish pain and improve the healing of ulcers in oral mucositis. However, there is no conclusive evidence of chitosan as a superior treatment for oral mucositis compared with other current therapies.

Recent advances in chitosan-based materials; The synthesis, modifications and biomedical applications

The attention to polymer-based biomaterials, for instance, chitosan and its derivatives, as well as the techniques for using them in numerous scientific domains, is continuously rising. Chitosan is a decomposable naturally occurring polymeric material that is mostly obtained from seafood waste. Because of its special ecofriendly, biocompatible, non- toxic nature as well as antimicrobial properties, chitosan-based materials have received a lot of interest in the field of biomedical applications. The reactivity of chitosan is mainly because of the amino and hydroxyl groups in its composition, which makes it further fascinating for various uses, including biosensing, textile finishing, antimicrobial wound dressing, tissue engineering, bioimaging, gene, DNA and drug delivery and as a coating material for medical implants. This study is an overview of the different types of chitosan-based materials which now a days have been fabricated by applying different techniques and modifications that include etherification, esterification, crosslinking, graft copolymerization and o-acetylation etc. for hydroxyl groups' processes and acetylation, quaternization, Schiff's base reaction, and grafting for amino groups' reactions. Furthermore, this overview summarizes the literature from recent years related to the important applications of chitosan-based materials (i.e., thin films, nanocomposites or nanoparticles, sponges and hydrogels) in different biomedical applications.

Recent advances in nanoantibiotics against multidrug-resistant bacteria

Multidrug-resistant (MDR) bacteria-caused infections have been a major threat to human health. The abuse of conventional antibiotics accelerates the generation of MDR bacteria and makes the situation worse. The emergence of nanomaterials holds great promise for solving this tricky problem due to their multiple antibacterial mechanisms, tunable antibacterial spectra, and low probabilities of inducing drug resistance. In this review, we summarize the mechanism of the generation of drug resistance, and introduce the recently developed nanomaterials for dealing with MDR bacteria via various antibacterial mechanisms. Considering that biosafety and mass production are the major bottlenecks hurdling the commercialization of nanoantibiotics, we introduce the related development in these two aspects. We discuss urgent challenges in this field and future perspectives to promote the development and translation of nanoantibiotics as alternatives against MDR pathogens to traditional antibiotics-based approaches.

Influence of Lavender Essential Oil on the Physical and Antibacterial Properties of Chitosan Sponge for Hemostatic Applications

Uncontrollable bleeding continues to stand as the primary cause of fatalities globally following surgical procedures, traumatic incidents, disasters, and combat scenarios. The swift and efficient management of bleeding through the application of hemostatic agents has the potential to significantly reduce associated mortality rates. One significant drawback of currently available hemostatic products is their susceptibility to bacterial infections at the bleeding site. As this is a prevalent issue that can potentially delay or compromise the healing process, there is an urgent demand for hemostatic agents with antibacterial properties to enhance survival rates. To mitigate the risk of infection at the site of a lesion, we propose an alternative solution in the form of a chitosan-based sponge and antimicrobial agents such as silver nanoparticles (AgNPs) and lavender essential oil (LEO). The aim of this work is to provide a new type of hemostatic sponge with an antibacterial barrier against a wide range of Gram-positive and Gram-negative microorganisms: Staphylococcus epidermidis 2018 and Enterococcus faecalis VRE 2566 (Gram-positive strains) and Klebsiella pneumoniae ATCC 10031 and Escherichia coli ATCC 35218 (Gram-negative strains).

Carboxymethyl Chitosan Hydrogels for Effective Wound Healing-An Animal Study

Hydrogels have various applications in medicine, for example, in systems for controlled drug release or as wound dressings, where they provide an appropriate environment for healing and constitute a barrier to microorganisms. The aim of this study was to evaluate the action of carboxymethyl chitosan (CMCS) hydrogels in wound healing therapy in vivo using a laboratory rat model. The hydrogels were formed from aqueous solutions of a CMCS biopolymer via electron beam irradiation, with the presence of a crosslinking agent of poly(ethylene glycol) diacrylate. A histopathological examination of injured tissue, using a model of a hard-to-heal wound, indicated that the CMCS hydrogel supported healing. The new gel dressing, being noncytotoxic, presents great potential in wound treatment, with positive effects on the amount of inflammatory infiltration, young collagen formation, and the degree of epidermalization. A key advantage of the current approach (i.e., using competitive radiation technology for synthesis) is that it includes only one step, with the product being sterilized as it is synthesized. The hydrogel effectively supports wound healing and can serve as a bio-based and biodegradable platform for other medical applications.

Chitosan-Glycolic Acid Gel Modification of Chloride Ion Transport in Mammalian Skin: An In Vitro Study

Chitosan, a polyaminosaccharide with high medical and cosmetic potential, can be combined with the beneficial properties of glycolic acid to form a gel that not only moisturizes the skin, but also has a regenerative effect. Its involvement in the activation of biochemical processes may be associated with the activity of skin ion channels. Therefore, the aim of the research was to evaluate the immediate (15 s) and long-term (24 h) effect of chitosan-glycolic acid gel (CGG) on the transepithelial electric potential and the transepithelial electric resistance (R) of skin specimens tested in vitro. Stimulation during immediate and prolonged application of CGG to skin specimens resulted in a significant decrease in the measured minimal transepithelial electric potential (PDmin). The absence of any change in the R after the CGG application indicates that it does not affect the skin transmission, or cause distortion, microdamage or changes in ion permeability. However, the reduction in potential may be due to the increased transport of chloride ions, and thus water, from outside the cell into the cell interior. Increased secretion of chloride ions is achieved by stimulating the action of the CFTR (cystic fibrosis transmembrane conductance). It can be assumed that chitosan gently stimulates the secretion of chlorides, while maintaining a tendency to reduce the transport of sodium ions, without causing deformation or tissue damage.

A Review of Chitosan and Chitosan Nanofiber: Preparation, Characterization, and Its Potential Applications

Chitosan is produced by deacetylating the abundant natural chitin polymer. It has been employed in a variety of applications due to its unique solubility as well as its chemical and biological properties. In addition to being biodegradable and biocompatible, it also possesses a lot of reactive amino side groups that allow for chemical modification and the creation of a wide range of useful derivatives. The physical and chemical characteristics of chitosan, as well as how it is used in the food, environmental, and medical industries, have all been covered in a number of academic publications. Chitosan offers a wide range of possibilities in environmentally friendly textile processes because of its superior absorption and biological characteristics. Chitosan has the ability to give textile fibers and fabrics antibacterial, antiviral, anti-odor, and other biological functions. One of the most well-known and frequently used methods to create nanofibers is electrospinning. This technique is adaptable and effective for creating continuous nanofibers. In the field of biomaterials, new materials include nanofibers made of chitosan. Numerous medications, including antibiotics, chemotherapeutic agents, proteins, and analgesics for inflammatory pain, have been successfully loaded onto electro-spun nanofibers, according to recent investigations. Chitosan nanofibers have several exceptional qualities that make them ideal for use in important pharmaceutical applications, such as tissue engineering, drug delivery systems, wound dressing, and enzyme immobilization. The preparation of chitosan nanofibers, followed by a discussion of the biocompatibility and degradation of chitosan nanofibers, followed by a description of how to load the drug into the nanofibers, are the first issues highlighted by this review of chitosan nanofibers in drug delivery applications. The main uses of chitosan nanofibers in drug delivery systems will be discussed last.

Chitosan-Based Biomaterials for Hemostatic Applications: A Review of Recent Advances

Hemorrhage is a detrimental event present in traumatic injury, surgery, and disorders of bleeding that can become life-threatening if not properly managed. Moreover, uncontrolled bleeding can complicate surgical interventions, altering the outcome of surgical procedures. Therefore, to reduce the risk of complications and decrease the risk of morbidity and mortality associated with hemorrhage, it is necessary to use an effective hemostatic agent that ensures the immediate control of bleeding. In recent years, there have been increasingly rapid advances in developing a novel generation of biomaterials with hemostatic properties. Nowadays, a wide array of topical hemostatic agents is available, including chitosan-based biomaterials that have shown outstanding properties such as antibacterial, antifungal, hemostatic, and analgesic activity in addition to their biocompatibility, biodegradability, and wound-healing effects. This review provides an analysis of chitosan-based hemostatic biomaterials and discusses the progress made in their performance, mechanism of action, efficacy, cost, and safety in recent years.

Lupeol-loaded chitosan-Ag+ nanoparticle/sericin hydrogel accelerates wound healing and effectively inhibits bacterial infection

Lupeol, a pentacyclic triterpene, has demonstrated significant wound healing properties; however, its low water solubility has limited its clinical applicability. To overcome this limitation, we utilized Ag⁺-modified chitosan (CS-Ag) nanoparticles to deliver lupeol, resulting in the formation of CS-Ag-L-NPs. These nanoparticles were then encapsulated within a temperature-sensitive, self-assembled sericin hydrogel. Various analytical methods, including SEM, FTIR, XRD, HPLC, TGA assay, hemolysis and antibacterial activity tests, were employed to characterize the nanoparticles. Additionally, an infectious wound model was used to evaluate the therapeutic and antibacterial efficacy of the CS-Ag-L-NPs modified sericin hydrogel. Our results showed that the encapsulation efficiency of lupeol in CS-Ag-L-NPs reached 62.1 %, with good antibacterial activity against both gram-positive and gram-negative bacteria and a low hemolysis ratio (<5 %). The CS-Ag-L-NPs sericin gel exhibited multiple beneficial effects, including inhibiting bacterial proliferation in wound beds, promoting wound healing via accelerated re-epithelialization, reducing inflammation, and enhancing collagen fiber deposition. We conclude that the CS-Ag-L-NPs loaded sericin hydrogel has tremendous potential for development as a multifunctional therapeutic platform capable of accelerating wound healing and effectively suppressing bacterial infections in clinical settings.

Considerations for an ideal post-surgical wound dressing aligned with antimicrobial stewardship objectives: a scoping review

OBJECTIVE

Most surgical wounds heal by primary or secondary intention. Surgical wounds can present specific and unique challenges including wound dehiscence and surgical site infection (SSI), either of which can increase risk of morbidity and mortality. The use of antimicrobials to treat infection in these wounds is prevalent, but there is now an imperative to align treatment with reducing antimicrobial resistance and antimicrobial stewardship (AMS). The aim of this review was to explore the published evidence identifying general considerations/criteria for an ideal post-surgical wound dressing in terms of overcoming potential wound healing challenges (including infection) while supporting AMS objectives.

METHOD

A scoping review examining evidence published from 1954-2021, conducted by two authors acting independently. Results were synthesised narratively and have been reported in line with PRISMA Extension for Scoping Reviews.

RESULTS

A total of 819 articles were initially identified and subsequently filtered to 178 for inclusion in the assessment. The search highlighted six key outcomes of interest associated with post-surgical wound dressings: wound infection; wound healing; physical attributes related to comfort, conformability and flexibility; fluid handling (e.g., blood and exudate); pain; and skin damage.

CONCLUSION

There are several challenges that can be overcome when treating a post-surgical wound with a dressing, not least the prevention and treatment of SSIs. However, it is imperative that the use of antimicrobial wound dressings is aligned with AMS programmes and alternatives to active antimicrobials investigated.

Wound Dressing Modifications for Accelerated Healing of Infected Wounds

Infections that occur during wound healing involve the most frequent complications in the field of wound care which not only inhibit the whole process but also lead to non-healing wound formation. The diversity of the skin microbiota and the wound microenvironment can favor the occurrence of skin infections, contributing to an increased level of morbidity and even mortality. As a consequence, immediate effective treatment is required to prevent such pathological conditions. Antimicrobial agents loaded into wound dressings have turned out to be a great option to reduce wound colonization and improve the healing process. In this review paper, the influence of bacterial infections on the wound-healing phases and promising modifications of dressing materials for accelerated healing of infected wounds are discussed. The review paper mainly focuses on the novel findings on the use of antibiotics, nanoparticles, cationic organic agents, and plant-derived natural compounds (essential oils and their components, polyphenols, and curcumin) to develop antimicrobial wound dressings. The review article was prepared on the basis of scientific contributions retrieved from the PubMed database (supported with Google Scholar searching) over the last 5 years.

Extracellular Vesicle-Based Hydrogels for Wound Healing Applications

Hydrogels and extracellular vesicle-based therapies have been proposed as emerging therapeutic assets in wound closure. The combination of these elements has given good results in managing chronic and acute wounds. The intrinsic characteristics of the hydrogels in which the extracellular vesicles (EVs) are loaded allow for overcoming barriers, such as the sustained and controlled release of EVs and the maintenance of the pH for their conservation. In addition, EVs can be obtained from different sources and through several isolation methods. However, some barriers must be overcome to transfer this type of therapy to the clinic, for example, the production of hydrogels containing functional EVs and identifying long-term storage conditions for EVs. The aim of this review is to describe the reported EV-based hydrogel combinations, along with the obtained results, and analyze future perspectives.

Current and future outlook of loaded components in hydrogel composites for the treatment of chronic diabetic ulcers

Due to recalcitrant microangiopathy and chronic infection, traditional treatments do not easily produce satisfactory results for chronic diabetic ulcers. In recent years, due to the advantages of high biocompatibility and modifiability, an increasing number of hydrogel materials have been applied to the treatment of chronic wounds in diabetic patients. Research on composite hydrogels has received increasing attention since loading different components can greatly increase the ability of composite hydrogels to treat chronic diabetic wounds. This review summarizes and details a variety of newly loaded components currently used in hydrogel composites for the treatment of chronic diabetic ulcers, such as polymer/polysaccharides/organic chemicals, stem cells/exosomes/progenitor cells, chelating agents/metal ions, plant extracts, proteins (cytokines/peptides/enzymes) and nucleoside products, and medicines/drugs, to help researchers understand the characteristics of these components in the treatment of diabetic chronic wounds. This review also discusses a number of components that have not yet been applied but have the potential to be loaded into hydrogels, all of which play roles in the biomedical field and may become important loading components in the future. This review provides a "loading component shelf" for researchers of composite hydrogels and a theoretical basis for the future construction of "all-in-one" hydrogels.

Deciphering the focuses and trends in skin regeneration research through bibliometric analyses

Increasing attention to skin regeneration has rapidly broadened research on the topic. However, no bibliometric analysis of the field’s research trends has yet been conducted. In response to this research gap, this study analyzed the publication patterns and progress of skin regeneration research worldwide using a bibliometric analysis of 1,471 papers comprising 1,227 (83.4%) original articles and 244 (16.6%) reviews sourced from a Web of Science search. Publication distribution was analyzed by country/region, institution, journal, and author. The frequency of keywords was assessed to prepare a bibliometric map of the development trends in skin regeneration research. China and the United States were the most productive countries in the field: China had the greatest number of publications at 433 (29.4%) and the United States had the highest H-index ranking (59 with 15,373 citations or 31.9%). Author keywords were classified into four clusters: stem cell, biomaterial, tissue engineering, and wound dressing. “Stem cells,” “chitosan,” “tissue engineering,” and “wound dressings” were the most frequent keywords in each cluster; therefore, they reflected the field’s current focus areas. “Immunomodulation,” “aloe vera,” “extracellular vesicles,” “injectable hydrogel,” and “three-dimensional (3D) bioprinting” were relatively new keywords, indicating that biomaterials for skin regeneration and 3D bioprinting are promising research hotspots in the field. Moreover, clinical studies on new dressings and techniques to accelerate skin regeneration deserve more attention. By uncovering current and future research hotspots, this analysis offers insights that may be useful for both new and experienced scholars striving to expand research and innovation in the field of skin regeneration.

Hemostasis and Anti-Inflammatory Abilities of AuNPs-Coated Chitosan Dressing for Burn Wounds

Burn injuries are a common hazard in the military, as fire is likely to be weaponized. Thus, it is important to find an effective substance to accelerate burn wound healing. This study used chitosan and gold nanoparticles (AuNPs) as wound dressings and investigated their effectiveness in femoral artery hemorrhage swine and rat burn models. Chitosan dressing has significant hemostatic properties compared with gauze. Histological results showed that burn wounds treated with chitosan or AuNP-coated chitosan dressings exhibited more cells and a continuous structure of the epidermis and dermis than those of the control and untreated lesion groups. Furthermore, both chitosan dressings have been shown to positively regulate the expression of genes- and cytokines/chemokines-related to the wound healing process; AuNP-coated chitosan significantly lessened severe sepsis and inflammation, balanced the activities of pro-fibrotic and anti-fibrotic ligands for tissue homeostasis, regulated angiogenesis, and inhibited apoptosis activity, thereby being beneficial for the burn microenvironment. Hence, chitosan alone or in combination with AuNPs represents a prospective therapeutic substance as a burn dressing which might be helpful for burn wound care. This study provides a novel hemostasis dressing for modern warfare that is simple to use by most medical and paramedical personnel handling for burn treatment.

Applications of Chitosan in Surgical and Post-Surgical Materials

The continuous advances in surgical procedures require continuous research regarding materials with surgical applications. Biopolymers are widely studied since they usually provide a biocompatible, biodegradable, and non-toxic material. Among them, chitosan is a promising material for the development of formulations and devices with surgical applications due to its intrinsic bacteriostatic, fungistatic, hemostatic, and analgesic properties. A wide range of products has been manufactured with this polymer, including scaffolds, sponges, hydrogels, meshes, membranes, sutures, fibers, and nanoparticles. The growing interest of researchers in the use of chitosan-based materials for tissue regeneration is obvious due to extensive research in the application of chitosan for the regeneration of bone, nervous tissue, cartilage, and soft tissues. Chitosan can serve as a substance for the administration of cell-growth promoters, as well as a support for cellular growth. Another interesting application of chitosan is hemostasis control, with remarkable results in studies comparing the use of chitosan-based dressings with traditional cotton gauzes. In addition, chitosan-based or chitosan-coated surgical materials provide the formulation with antimicrobial activity that has been highly appreciated not only in dressings but also for surgical sutures or meshes.

Engineering Biomimetic Extracellular Matrix with Silica Nanofibers: From 1D Material to 3D Network

Biomaterials at nanoscale is a fast-expanding research field with which extensive studies have been conducted on understanding the interactions between cells and their surrounding microenvironments as well as intracellular communications. Among many kinds of nanoscale biomaterials, mesoporous fibrous structures are especially attractive as a promising approach to mimic the natural extracellular matrix (ECM) for cell and tissue research. Silica is a well-studied biocompatible, natural inorganic material that can be synthesized as morpho-genetically active scaffolds by various methods. This review compares silica nanofibers (SNFs) to other ECM materials such as hydrogel, polymers, and decellularized natural ECM, summarizes fabrication techniques for SNFs, and discusses different strategies of constructing ECM using SNFs. In addition, the latest progress on SNFs synthesis and biomimetic ECM substrates fabrication is summarized and highlighted. Lastly, we look at the wide use of SNF-based ECM scaffolds in biological applications, including stem cell regulation, tissue engineering, drug release, and environmental applications.

Application Progress of Modified Chitosan and Its Composite Biomaterials for Bone Tissue Engineering

In recent years, bone tissue engineering (BTE), as a multidisciplinary field, has shown considerable promise in replacing traditional treatment modalities (i.e., autografts, allografts, and xenografts). Since bone is such a complex and dynamic structure, the construction of bone tissue composite materials has become an attractive strategy to guide bone growth and regeneration. Chitosan and its derivatives have been promising vehicles for BTE owing to their unique physical and chemical properties. With intrinsic physicochemical characteristics and closeness to the extracellular matrix of bones, chitosan-based composite scaffolds have been proved to be a promising candidate for providing successful bone regeneration and defect repair capacity. Advances in chitosan-based scaffolds for BTE have produced efficient and efficacious bio-properties via material structural design and different modifications. Efforts have been put into the modification of chitosan to overcome its limitations, including insolubility in water, faster depolymerization in the body, and blood incompatibility. Herein, we discuss the various modification methods of chitosan that expand its fields of application, which would pave the way for future applied research in biomedical innovation and regenerative medicine.

Regulating the Physicochemical Properties of Chitosan Films through Concentration and Neutralization

Chitosan offers real potential for use in food preservation, biomedicine, and environmental applications due to its excellent functional properties, such as ease in the fabrication of large films, biocompatibility, and antibacterial properties. However, the production and application of chitosan films were limited by their strong residual acetic acid taste, weak mechanical properties, and poor water vapor barrier properties. In this study, the effects of the chitosan concentration in the film-forming solutions and the neutralization treatment on the physicochemical properties of chitosan films were examined. The results demonstrated that the chitosan concentration affected the mechanical and barrier properties of chitosan films without the neutralization treatment. This was mainly due to the low acetic acid contents in chitosan films after drying. Acetic acid acted as a plasticizer within chitosan films resulting in a looser network structure. After neutralization, the chitosan films showed improvements in properties, with little effect on the chitosan concentration in the film-forming solutions. Moreover, chitosan films after neutralization showed no residual acetic acid. Therefore, neutralization could effectively improve the performance of chitosan films.

Application of Chitosan and Its Derivative Polymers in Clinical Medicine and Agriculture

Chitosan is a biodegradable natural polymer derived from the exoskeleton of crustaceans. Because of its biocompatibility and non-biotoxicity, chitosan is widely used in the fields of medicine and agriculture. With the latest technology and technological progress, different active functional groups can be connected by modification, surface modification, or other configurations with various physical, chemical, and biological properties. These changes can significantly expand the application range and efficacy of chitosan polymers. This paper reviews the different uses of chitosan, such as catheter bridging to repair nerve broken ends, making wound auxiliaries, as tissue engineering repair materials for bone or cartilage, or as carriers for a variety of drugs to expand the volume or slow-release and even show potential in the fight against COVID-19. In addition, it is also discussed that chitosan in agriculture can improve the growth of crops and can be used as an antioxidant coating because its natural antibacterial properties are used alone or in conjunction with a variety of endophytic bacteria and metal ions. Generally speaking, chitosan is a kind of polymer material with excellent development prospects in medicine and agriculture.