Bio-Based Rigid Polyurethane Foam Composites Reinforced with Bleached Curauá Fiber

A Study on a Polymeric Foam Based on Pulse Proteins and Cellulose Fibrils

Biofoams are a challenge for scientists in terms of innovation. Incorporation of cellulose fibrils (CF), might help improve the microstructure of foams, thus this study focuses on studying the impact of CF on the foaming properties and rheology of lentil protein (LP) foams at various pH and CF concentrations. Additionally, LP-CF mixtures were transformed into solid foams, and their microstructure, physical properties, and morphology were evaluated. CF concentration significantly impacted on LP-CF foam properties, primarily due to high viscosity values. Increased CF concentration resulted in improved FS values (up to 77 min) at all pH values. This is likely attributed to associative interactions and coacervates formation. Also, foam microstructure could be related to apparent viscosity, suggesting the role of viscosity in preserving the integrity of the wet foam structure during freezing and lyophilization processes. However, elevated viscosity values might negatively impact properties such as foaming capacity and produce denser microstructures. The microstructure and morphology analysis revealed that certain foams exhibited a sponge-like structure with open pores and semi-spherical shapes, supported by CF fibers extending and forming layers. However, the structure itself was irregular. While others exhibited non-uniform, irregular pore size, and shape, along with a denser structure. These findings contribute to understanding the behavior of LP-CF mixtures, although additional investigations on mechanical properties, biodegradability, and hydrophobicity are necessary to reach their full potential for various applications.

Role of hemp fiber addition on thermal stability, heat insulation, air permeability and cellular structural features of rigid polyurethane foam

In this current study, rigid polyurethane foams (RPUFs) composites were prepared using different percentage (3, 6, 9 and 12%) of the hemp fibers via one-shut one-step polymerization method. The influences of the hemp fiber addition on the RPUFs were investigated meticulously by means of Fourier-transform infrared spectroscopy (FTIR), thermo gravimetric analysis (TGA), thermal conductivity measurement and scanning electron microscopy (SEM) techniques by evaluating the alternations in the chemical structures of the component, thermal stability, apparent density, insulation performance and cellular topology of the produced samples. The structural analysis revealed that there existed the strong secondary chemical bonds between the functional groups belonging to the components and, depending on that, the improvement in the thermal stability of the foam samples was recorded accompanied by the formation of the better interfacial adhesion. Furthermore, thermal conductivity values of the hemp fiber-loaded RPUFs were observed to increase regularly with the increasing of the content level of the hemp fibers. This was explained by enhancement in the bulk phase conduction level depending of the apparent density rising, reduction in CO2 concentration inside cells as well as the formation of the distorted cellular structures. The obtained air permeability results displayed that the hemp fibers incorporated successfully with RPUF structure, which provides the occurrence of the novel micro barriers and pathways limiting the passage of the air throughout the matrix. The taken scanning electron microscopy images also indicated that the cellular morphology and dimensional stability of the produced foams affected negatively by the hemp fiber addition. At high contents, the wrinkled, non-uniform and irregular cellular structures were observed with ruptured and collapsed walls and struts.

Development of Rigid Polyurethane Foams Based on Kraft Lignin Polyol Obtained by Oxyalkylation Using Propylene Carbonate

This study aimed to develop new rigid polyurethane foams (RPUFs) for thermal insulation based on kraft lignin, the main by-product of the pulp and paper industry. Crude lignin-based polyol (LBP) was obtained via the oxyalkylation of kraft lignin using propylene carbonate (PC). A design of experiments (DoE) was used to evaluate the effect of the isocyanate (NCO)-to-hydroxyl (OH)-group’s ratio, the content of crude LBP, the blowing agent (BA), and catalyst on the thermal conductivity and density of RPUFs. Statistical analysis revealed that the increase in crude LBP and BA content in the formulation decreases the thermal conductivity and density of the foams. In addition, the fact that LBP is a viscous polyol containing PC-oligomers appears to affect the cellular structure of RPUFs, and consequently reduces their mechanical and thermal properties. The main novelty of this study consisted in the careful optimization of the formulation, namely, with regard to the type of blowing agent and with the high content of crude LBP obtained from the oxyalkylation of LignoBoost kraft lignin without purification to obtain good quality RPUF that meets market requirements for insulation materials.

Bio-Based Rigid Polyurethane Foams Modified with C-MOF/MWCNTs and TBPBP as Building Insulation Materials: Synergistic Effect and Corresponding Mechanism for Enhancing Fire and Smoke Safety

Rigid polyurethane foams (RPUFs) as building insulation materials quickly burn and release a lot of heat, smoke, and carbon monoxide, and cause human safety risk and severe environmental pollution. To mitigate these disadvantages, MOF/MWCNTs were fabricated via mixing Cu ions' partly substituted framework of ZIF-67 and MWCNTs, and further calcinated MOF/MWCNTs (C-MOF/MWCTs) was newly generated by calcinating MOF/MWCNTs in air. Then, MOF/MWCNTs and C-MOF/MWCNTs were respectively employed together with a phosphorus-nitrogen-containing reactive flame retardant (TBPBP) to prepare renewable bio-based rigid polyurethane foam, including RPUF-T/MOF/MWCNTs 2 and RPUF-T/C-MOF/MWCNTs 2. The characterization results showed that RPUF-T/C-MOF/MWCNTs 2 had better performance than RPUF-T/MOF/MWCNTs 2 and neat RPUF. Compared to neat RPUF, the compressive strength, limiting oxygen index value, and the mass char residue in cone calorimetry test of RPUF-T/C-MOF/MWCNTs 2, respectively, were increased by 105.93%, 46.35%, and 347.32%; meanwhile, the total heat release rate, total smoke production, total carbon monoxide product, and total carbon dioxide product were reduced by 47.97%, 50.46%, 41.38%, 43.37%, respectively. This study provides a referable method for preparing RPUFs with good physical properties, fire, and smoke safety, which is favorable for human safety and environmental protection as new building insulation materials.

Cost-Effective Fabrication of Modified Palygorskite-Reinforced Rigid Polyurethane Foam Nanocomposites

Integration of nanoclay minerals into rigid polyurethane foams (RPUFs) is a cost-effective solution to enhance foam’s performance via environmental protection technology. In this work, palygorskite/RPUFs nanocomposites (Pal/RPUFNs) with excellent mechanical properties and thermal stability were prepared via a one-step method, using 4,4’-diphenylmethane diisocyanate and polyether polyol as the starting materials, coupled with Pal modified by silane coupling agent KH570. The effects of the modified Pal on the mechanics, morphology, and thermal properties of the nanocomposites were studied systematically. When the content of the modified Pal was 8 wt% of polyether polyol, the elastic modulus and compressive strength of the Pal/RPUFNs were increased by ca. 131% and 97%, respectively. The scanning electron microscopy images indicated that the addition of the modified Pal significantly decreased the cell diameter of the Pal/RPUFNs. The results of thermogravimetric and derivative thermogravimetry analyses revealed that the addition of the modified Pal increased the thermal weight loss central temperature of the Pal/RPUFNs, showing better thermal stability in comparison with the pure RPUFs. A self-made evaluation device was used to estimate the thermal insulation ability of the Pal/RPUFNs. It was found that the small cell size and uniform cellular structure were keys to improving the thermal insulation performance of the RPUFs. The prepared Pal/RPUFNs are expected to have great potential in the field of building insulation.