Recombinase Polymerase Amplification Assay with and without Nuclease-Dependent-Labeled Oligonucleotide Probe

Isothermal Nucleic Acid Amplification-Based Lateral Flow Testing for the Detection of Plant Viruses

Isothermal nucleic acid amplification-based lateral flow testing (INAA-LFT) has emerged as a robust technique for on-site pathogen detection, providing a visible indication of pathogen nucleic acid amplification that rivals or even surpasses the sensitivity of real-time quantitative PCR. The isothermal nature of INAA-LFT ensures consistent conditions for nucleic acid amplification, establishing it as a crucial technology for rapid on-site pathogen detection. However, despite its considerable promise, the widespread application of isothermal INAA amplification-based lateral flow testing faces several challenges. This review provides an overview of the INAA-LFT procedure, highlighting its advancements in detecting plant viruses. Moreover, the review underscores the imperative of addressing the existing limitations and emphasizes ongoing research efforts dedicated to enhancing the applicability and performance of this technology in the realm of rapid on-site testing.

Development of a novel integrated isothermal amplification system for detection of bacteria-spiked blood samples

Bloodstream infection (BSI) caused by bacteria is highly pathogenic and lethal, and easily develops whole-body inflammatory state. Immediate identification of disease-causing bacteria can improve patient prognosis. Traditional testing methods are not only time-consuming, but such tests are limited to laboratories. Recombinase polymerase amplification combined with lateral flow dipstick (RPA-LFD) holds great promise for rapid nucleic acid detection, but the uncapping operation after amplification easily contaminates laboratories. Therefore, the establishment of a more effective integrated isothermal amplification system has become an urgent problem to be solved. In this study, we designed and fabricated a hermetically sealed integrated isothermal amplification system. Combining with this system, a set of RPA-LFD assays for detecting S. aureus, K. peneumoniae, P. aeruginosa, and H. influenza in BSI were established and evaluated. The whole process could be completed in less than 15 min and the results can be visualized by the naked eye. The developed RPA-LFD assays displayed a good sensitivity, and no cross-reactivity was observed in seven similar bacterial genera. The results obtained with 60 clinical samples indicated that the developed RPA-LFD assays had high specifcity and sensitivity for identifying S. aureus, K. peneumoniae, P. aeruginosa, and H. influenza in BSI. In conclusion, our results showed that the developed RPA-LFD assay is an alternative to existing PCR-based methods for detection of S. aureus, K. peneumoniae, P. aeruginosa, and H. influenza in BSI in primary hospitals.

A rapid and visual detection of Staphylococcus haemolyticus in clinical specimens with RPA-LFS

Staphylococcus haemolyticus (S. haemolyticus), which is highly prevent in the hospital environment, is an etiological factor for nosocomial infections. Point-of-care rapid testing (POCT) of S. haemolyticus is not possible with the currently used detection methods. Recombinase polymerase amplification (RPA) is a novel isothermal amplification technology with high sensitivity and specificity. The combination of RPA and lateral flow strips (LFS) can achieve rapid pathogen detection, enabling POCT. This study developed an RPA-LFS methodology using a specific probe/primer pair to identify S. haemolyticus. A basic RPA reaction was performed to screen the specific primer from 6 primer pairs targeting mvaA gene. The optimal primer pair was selected based on agarose gel electrophoresis, and the probe was designed. To eliminate false-positive results caused by the byproducts, base mismatches were introduced in the primer/probe pair. The improved primer/probe pair could specifically identify the target sequence. To explore the optimal reaction conditions, the effects of reaction temperature and duration of the RPA-LFS method were systematically investigated. The improved system enabled optimal amplification at 37 °C for 8 min, and the results were visualized within 1 min. The S. haemolyticus detection sensitivity of the RPA-LFS method, whose performance was unaffected by contamination with other genomes, was 0.147 CFU/reaction. Furthermore, we analyzed 95 random clinical samples with RPA-LFS, quantitative polymerase chain reaction (qPCR), and traditional bacterial-culture assays and found that the RPA-LFS had 100% and 98.73% compliance rates with the qPCR and traditional culture method, respectively, which confirms its clinical applicability. In this study, we designed an improved RPA-LFS assay based on the specific probe/primer pair for the detection of S. haemolyticus via rapid POCT, free from the limitations of the precision instruments, helping to make diagnoses and treatment decisions as soon as possible.

Rapid onsite detection of piper yellow mottle virus infecting black pepper by recombinase polymerase amplification-lateral flow assay (RPA-LFA)

Piper yellow mottle virus (PYMoV) is a pararetrovirus associated with stunt disease in black pepper. As the primary spread of the virus occurs through vegetative propagation, effective diagnostics are required for the production of virus-free plants. Currently available assays are time-consuming, require expensive equipment, and are not suitable for on-site detection. In the present study, two rapid assays based on the recombinase polymerase amplification (RPA) coupled with lateral flow assay (LFA) using (i) 6-carboxyfluorescein (FAM) labeled nfo probe and biotin-labeled reverse primer and (ii) FAM labeled forward and biotin-labeled reverse primer was developed for the detection of PYMoV. The assays were performed using TwistAmp DNA amplification reagents and crude extract from the infected plant and mealybug as templates. Both assays were optimized for parameters like concentration of magnesium acetate, temperature, and time. The RPA product was then diluted and applied to the sample pad of a lateral flow device for visualizing the results. The formation of a colored line at the test line was considered positive for PYMoV. The entire process from sample preparation to visualization of results could be completed in about 30 min. The developed assays were specific and 10 times more sensitive than PCR. The assays were validated using field samples of black pepper and mealybug vectors.

A versatile integrated tube for rapid and visual SARS-CoV-2 detection

The coronavirus disease 2019 (COVID-19) caused by novel severe acute respiratory coronavirus 2 (SARS-CoV-2) has been rapidly spreading worldwide. Rapid and widespread testing is essential to promote early intervention and curb the ongoing COVID-19 pandemic. Current gold standard reverse transcription-polymerase chain reaction (RT-PCR) for detecting SARS-CoV-2 is restricted to professional laboratories and well-trained personnel, thus, limiting its widespread use in resource-limited conditions. To overcome these challenges, we developed a rapid and convenient assay using a versatile integrated tube for the rapid and visual detection of SARS-CoV-2. The reaction conditions of the method were optimized using SARS-CoV-2 RNA standards and the sensitivity and specificity were further determined. Finally, it was verified on clinical specimens. The assay was completed within 40 min, and the result was visible by the naked eye. The limits of detection (LODs) for the target ORF1ab and N genes were 50 copies/μl. No cross-reactivity was observed with the RNA standard samples of four respiratory viruses or clinical samples of common respiratory viral infections. Ninety SARS-CoV-2 positive and 30 SARS-CoV-2 negative patient specimens were analyzed. We compared these results to both prior and concurrent RT-PCR evaluations. As a result, the overall sensitivity and specificity for detection SARS-CoV-2 were 94.5 and 100.0%, respectively.

Conclusion

The integrated tube assay has the potential to provide a simple, specific, sensitive, one-pot, and single-step assay for SARS-CoV-2.

Comparison of Biosensing Methods Based on Different Isothermal Amplification Strategies: A Case Study with Erwinia amylovora

Isothermal amplifications allow for the highly sensitive detection of nucleic acids, bypassing the use of instrumental thermal cycling. This work aimed to carry out an experimental comparison of the four most promising techniques: recombinase polymerase amplification (RPA) and loop-mediated isothermal amplification (LAMP) coupled with lateral flow test or coupled with additional amplification based on CRISPR/Cas12a resulting from the fluorescence of the Cas12a-cleaved probe. To compare the four amplification techniques, we chose the bacterial phytopathogen Erwinia amylovora (causative agent of fire blight), which has a quarantine significance in many countries and possesses a serious threat to agriculture. Three genes were chosen as the targets and primers were selected for each one (two for RPA and six for LAMP). They were functionalized by labels (biotin, fluorescein) at the 5' ends for amplicons recognition by LFT. As a result, we developed LAMP-LFT, LAMP-CRISPR/Cas, RPA-LFT, and RPA-CRISPR/Cas for E. amylovora detection. The detection limit was 10⁴ CFU/mL for LAMP-LFT, 10³ CFU/mL for LAMP-CRISPR/Cas, and 10² CFU/mL for RPA-LFT and RPA-CRISPR/Cas. The results of four developed test systems were verified by qPCR on a panel of real samples. The developed assays based on RPA, LAMP, CRISPR/Cas12a, and LFT are rapid (30-55 min), user-friendly, and highly sensitive for E. amylovora detection. All proposed detection methods can be applied to fire blight diagnosis and effective management of this disease.

Recent advances in recombinase polymerase amplification: Principle, advantages, disadvantages and applications

After the outbreak of SARS-CoV-2, nucleic acid testing quickly entered people's lives. In addition to the polymerase chain reaction (PCR) which was commonly used in nucleic acid testing, isothermal amplification methods were also important nucleic acid testing methods. Among several common isothermal amplification methods like displaced amplification, rolling circle amplification, and so on, recombinase polymerase amplification (RPA) was recently paid more attention to. It had the advantages like a simple operation, fast amplification speed, and reaction at 37-42°C, et al. So it was very suitable for field detection. However, there were still some disadvantages to RPA. Herein, our review mainly summarized the principle, advantages, and disadvantages of RPA. The specific applications of RPA in bacterial detection, fungi detection, virus detection, parasite detection, drug resistance gene detection, genetically modified food detection, and SARS-CoV-2 detection were also described. It was hoped that the latest research progress on RPA could be better delivered to the readers who were interested in RPA.

Rapid On-Site Detection of the Bursaphelenchus xylophilus Using Recombinase Polymerase Amplification Combined With Lateral Flow Dipstick That Eliminates Interference From Primer-Dependent Artifacts

The pine wood nematode (PWN), Bursaphelenchus xylophilus, is one of the most lethal nematode species, which causes pine wilt disease (PWD), a devastating forest disease. To date, no effective methods have been developed to control the disease; hence, rapid precise detection of B. xylophilus is of great significance. Traditional molecular diagnostic methods are time-consuming and require sophisticated instruments or skilled operators, which are unavailable in resource-limited settings. A specific, sensitive, and field-applicable diagnostic method is urgently needed. In this study, we developed a diagnostic method using recombinase polymerase amplification combined with lateral flow dipstick (RPA-LFD) for the rapid on-site detection of B. xylophilus. The false-positive signals from primer-dependent artifacts were eliminated using a probe, and base substitutions were included in the primer and probe. The entire detection process for the RPA-LFD assay can be completed under 38°C within approximately 30 min, including 15 min for crude nematode genomic DNA (gDNA) extraction and master mix preparation, 15 min for the RPA-LFD assay. This assay displayed high specificity toward B. xylophilus and showed no cross-reactions with closely related species, including Bursaphelenchus mucronatus and Bursaphelenchus doui. The sensitivity of this assay had a detection limit as low as 1 pg of B. xylophilus purified genomic DNA. Furthermore, the application of the RPA-LFD assay in simulated spiked pinewood samples showed accurate detection results. The RPA-LFD assay in this study successfully detected B. xylophilus in less than 30 min, providing a novel alternative for the simple, sensitive, and specific detection of B. xylophilus and showed potential for B. xylophilus point-of-care testing (POCT) in resource-limited areas or in field.