Selective Recovery of Cadmium, Cobalt, and Nickel from Spent Ni–Cd Batteries Using Adogen® 464 and Mesoporous Silica Derivatives

Selective recycling of lithium from spent LiNixCoyMn1-x-yO2 cathode via constructing a synergistic leaching environment

The global response to lithium scarcity is overstretched, and it is imperative to explore a green process to sustainably and selectively recover lithium from spent lithium-ion battery (LIB) cathodes. This work investigates the distinct leaching behaviors between lithium and transition metals in pure formic acid and the auxiliary effect of acetic acid as a solvent in the leaching reaction. A formic acid-acetic acid (FA-AA) synergistic system was constructed to selectively recycle 96.81% of lithium from spent LIB cathodes by regulating the conditions of the reaction environment to inhibit the leaching of non-target metals. Meanwhile, the transition metals generate carboxylate precipitates enriched in the leaching residue. The inhibition mechanism of manganese leaching by acetic acid and the leaching behavior of nickel or cobalt being precipitated after release was revealed by characterizations such as XPS, SEM, and FTIR. After the reaction, 90.50% of the acid can be recycled by distillation, and small amounts of the residual Li-containing concentrated solution are converted to battery-grade lithium carbonate by roasting and washing (91.62% recovery rate). This recycling process possesses four significant advantages: i) no additional chemicals are required, ii) the lithium sinking step is eliminated, iii) no waste liquid is discharged, and iv) there is the potential for profitability. Overall, this study provides a novel approach to the waste management technology of lithium batteries and sustainable recycling of lithium resources.

Optimization of atmospheric leaching parameters for cadmium and zinc recovery from low-grade waste by response surface methodology (RSM)

This study is focused on the optimization of effective parameters on Cadmium and Zinc recovery by atmospheric acid leaching of low-grade waste by response surface methodology (RSM) and using the Central Composite Design (CCD) method. The effects of parameters including time (0.5-2.5 h), temperature (40-80 °C), solid/liquid (S/L) (0.05-0.09 g/cc), particle size (174-44 mic), oxygen injection (0-1%) and pH (0.5-4.5) were statistically investigated at 5 surfaces. The sample of low-grade waste used in this study was mainly zinc factory waste. Two quadratic models for the correlation of independent parameters for the maximum recovery were proposed. The properties of waste were evaluated by X-ray diffraction (XRD) and X-ray fluorescence (XRF). Atomic absorption spectroscopy was used to determine the amount of Cadmium and Zinc in the leaching solution. The correlation coefficient (R2) for the predicted and experimental data of Cadmium and Zinc are 0.9837 and 0.9368, respectively. Time, S/L and size were the most effective parameters for the recovery efficiency of cadmium and zinc. 75.05% of Cadmium and 86.13% of Zinc were recovered in optimal conditions of leaching: S/L 0.08, pH 2.5, size 88 µm, 70 °C and 2.5 h. with air injection.

Exploring the Potential of Water-Soluble Squid Ink Melanin: Stability, Free Radical Scavenging, and Cd2+ Adsorption Abilities

Squid ink melanin can be efficiently extracted from the byproduct ink sac generated during squid processing. As a natural food colorant, it possesses inherent antioxidant properties and the capability to adsorb heavy metals. This study aims to investigate the solubility of water-soluble squid ink melanin (WSSM) obtained from the ink sac, as well as its stability under various conditions including temperature, pH, salt, sugar, potassium sorbate, metal ions, sodium benzoate, sodium sulfite (reducing agent), and hydrogen peroxide (oxidizing agent). Moreover, it explores the scavenging effects of WSSM on free radicals and cadmium ions. The findings suggest that WSSM's stability is insignificantly affected by high temperature, sucrose, and salt. However, acidity, sodium benzoate, potassium sorbate, sodium sulfite (Na2SO3), and hydrogen peroxide (H2O2) significantly influence its stability. Most metal ions do not impact the stability of WSSM, except for Fe2+, Fe3+, Al3+, and Cu2+, which result in the precipitation of WSSM. Additionally, WSSM exhibits remarkable antioxidant activity with IC50 values of 0.91, 0.56, and 0.52 mg/mL for scavenging superoxide anion radicals (O2-·), hydroxyl radicals (·OH), and DPPH radicals, respectively. It also demonstrates the ability to adsorb the heavy metal Cd2+, with the adsorption rate gradually increasing with a higher temperature and larger amounts of WSSM added. Infrared spectroscopy analysis reveals the weakening of characteristic peaks (-COOH and -OH) during the process of Cd2+ adsorption by WSSM, while SEM confirms surface roughening and structural damage after Cd2+ adsorption. This study provides valuable insights for the utilization of squid melanin products as natural antioxidants and heavy metal adsorbents in the food industry.

Effective Removal of Cd(II) from Aqueous Solutions Using Theobroma cacao Agro-Industrial Waste

Theobroma cacao agro-industrial waste (WTC) has been characterized and tested as an effective biosorbent to remove Cd(II) from aqueous media. At the optimum pH of 5.0, a maximum adsorption capacity of q_e,max = 58.5 mg g^-1 was determined. The structural and morphological characterization have been conducted by FTIR, SEM/EDX, and TGA measurements. The SEM/EDX results confirmed that the metals are adsorbed on the surface. C-O-C, OH, CH, NH, and C=O functional groups were identified by FTIR. TGA results were consistent with the presence of hemicellulose. Biosorption kinetics were rapid during the first 30 min and then reached equilibrium. The corresponding experimental data were well fitted to pseudo-first and -second order models, the latter being the best. The biosorption isotherm data were also well fitted to Temkin, Langmuir, and Freundlich models, showing that several sorption mechanisms may be involved in the Cd(II) biosorption process, which was characterized as exothermic (ΔH⁰ < 0), feasible, and spontaneous (ΔG⁰ < 0). In binary (Cd-Pb and Cd-Cu) and ternary (Cd-Pb-Cu) systems, Cu(II) and particularly Pb(II) co-cations exert strong antagonistic effects. Using HNO₃, effective good regeneration of WTC was obtained to efficiently remove Cd(II) up to three times.

Heavy metal contamination levels, source distribution, and risk assessment in fine sand of urban surface deposited sediments of Ekaterinburg, Russia

Urban surface deposited sediments (USDS) are unique indicators of local pollution that pose a potential threat to the living environment and human health. Ekaterinburg is a highly populated metropolitan area in Russia with rapid urbanization and industrialization activities. In Ekaterinburg's residential areas, about 35, 12, and 16 samples are represented by green zones, roads, driveways, and sidewalks, respectively. The total concentrations of heavy metals was detected using a chemical analyzer inductively coupled plasma mass spectrometry (ICP-MS). Zn, Sn, Sb, and Pb have the highest concentrations in the green zone, while V, Fe, Co, and Cu represent the utmost values on roads. Moreover, Mn and Ni are the prevailing metals in the fine sand fraction of driveways along with sidewalks. Broadly, the high pollution in the studied zones is generated by anthropogenic activities and traffic emissions. The potential ecological risk (RI) was observed in high risk (IR > 600), even though the results of all heavy metals reveal no adverse health effects from the considered noncarcinogenic metal for adults and children by different exposure pathways except the children's exposure to Co in case of the dermal contact, where the HI values of Co for children in the studied zones are higher than the proposed level (> 1). In all urban zones, the total carcinogenic risk (TLCR) values are predicted as a high potential inhalation exposure.

Eco-Friendly Recycling of Lithium Batteries for Extraction of High-Purity Metals

The significant increase in lithium batteries consumption produces a significant quantity of discarded lithium-ion batteries (LIBs). On the one hand, the shortage of high-grade ores leads to the necessity of processing low-grade ores, which contain a low percentage of valuable metals in comparison to the discarded LIBs that contain a high percentage of these metals, which enhances the processing of the discarded LIBs. On the other hand, the processing of discarded LIBs reduces the negative environmental effects that result from their storage and the harmful elements contained in their composition. Hence, the current study aims at developing cost-effective and ecofriendly technology for cobalt and lithium metal ion recovery based on discarded LIBs. A novel synthesized solid-phase adsorbent (TZAB) was utilized for the selective removal of cobalt from synthetic solutions and spent LIBs. The synthesized TZAB adsorbent was characterized by using 13C-NMR, GC-MS, FT-IR, 1H-NMR, and TGA. The factors affecting the adsorption of cobalt and lithium ions from synthetic solutions and spent LIBs, including the sorbent dose, pH, contact time, temperature, and cobalt concentration were investigated. The conditions surrounding the recovery of cobalt and lithium from processing discarded LIBs, were investigated to optimize the maximum recovery. The Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models were used to study the kinetics of the adsorption process. The obtained results showed that high-purity CoC₂O₄ and Li₃PO₄ were obtained with a purity of 95% and 98.3% and a percent recovery of 93.48% and 95.76%, respectively. The maximum recovery of Co(II) from synthetic solutions was obtained at C₀ = 500 mg·L^-1, dose of 0.08 g, pH 7.5, T = 25 °C, and reaction time = 90 min. The collected data from Langmuir's isotherm and the adsorption processes of Co agree with the data predicted by the D-R isotherm models, which shows that the adsorption of Co(II) onto the TZAB seems to be chemisorption, and the results agree with the Langmuir and D-R isotherm models.

Recovery of W(VI) from Wolframite Ore Using New Synthetic Schiff Base Derivative

A new synthetic material, namely, (3-(((4-((5-(((S)-hydroxyhydrophosphoryl)oxy)-2-nitrobenzylidene) amino) phenyl) imino) methyl)-4-nitrophenyl hydrogen (R)-phosphonate)), was subjected to a quaternary ammonium salt and named (HNAP/QA). Several characterizations, such as FTIR spectrometry, ¹H-NMR analysis, ¹³C-NMR analysis, ³¹P-NMR Analysis, TGA analysis, and GC-MS analysis, were performed to ensure its felicitous preparation. HNAP/QA is capable of the selective adsorption of W(VI) ions from its solutions and from its rock leachate. The optimum factors controlling the adsorption of W(VI) ions on the new adsorbent were studied in detail. Furthermore, kinetics and thermodynamics were studied. The adsorption reaction fits the Langmuir model. The sorption process of the W(VI) ions is spontaneous due to the negative value of ∆G° calculated for all temperatures, while the positive value of ∆H° proves that the adsorption of the W(VI) ions adsorption on HNAP/QA is endothermic. The positive value of ∆S° suggests that the adsorption occurs randomly. Ultimately, the recovery of W(IV) from wolframite ore was conducted successfully.

Recent Advances in Synthesis, Characterization and Applications of Innovative Materials in Removal of Water Contaminants

Water is a scarce resource with a close and intricate nexus with energy [...].

Characteristic Aspects of Uranium(VI) Adsorption Utilizing Nano-Silica/Chitosan from Wastewater Solution

A new nano-silica/chitosan (SiO₂/CS) sorbent was created using a wet process to eliminate uranium(VI) from its solution. Measurements using BET, XRD, EDX, SEM, and FTIR were utilized to analyze the production of SiO₂/CS. The adsorption progressions were carried out by pH, SiO₂/CS dose, temperature, sorbing time, and U(VI) concentration measurements. The optimal condition for U(VI) sorption (165 mg/g) was found to be pH 3.5, 60 mg SiO₂/CS, for 50 min of sorbing time, and 200 mg/L U(VI). Both the second-order sorption kinetics and Langmuir adsorption model were observed to be obeyed by the ability of SiO₂/CS to eradicate U(VI). Thermodynamically, the sorption strategy was a spontaneous reaction and exothermic. According to the findings, SiO₂/CS had the potential to serve as an effectual sorbent for U(VI) displacement.

Potentially harmful elements in urban surface deposited sediment of Ekaterinburg, Russia: Occurrence, source appointment and risk assessment

In this study, the human health risks of potentially harmful elements (PHEs) in urban surface deposited sediments (USDS) were examined by collecting urban dust samples, measuring their PHE concentrations, and using index evaluation. About 35, 12 and 16 samples are represented a green zones, roads, driveways and sidewalks in residential areas of Ekaterinburg, respectively. The dust fraction (0.002-0.1 mm) was obtained by sieving, filtration, and decantation process. Total concentrations of 10 PHEs were measured using inductively coupled plasma mass spectrometry. The highest concentrations of Pb were found in USDS from green zones, while Fe, V, Mn, Co, Ni, Sn, and Sb on roads, Cu and Zn on driveways and sidewalks. The contamination levels in the investigated land-use areas were studied, where the highest contamination was contributed from Sb in the driveways and sidewalk. Moreover, the pollution in the studied zones was a high load, contributing to anthropogenic activities and traffic emissions. No non-cancerogenic risk was attributed from the PHEs based on the results of health indices (HI < 1) for both adult and children, except Co and Ni which has HI > 1 for children. The total carcinogenic risk (TLCR) in all urban landscape areas is defined as a high potential inhalation exposure and a low potential ingestion and dermal exposure.

A Novel Triazole Schiff Base Derivatives for Remediation of Chromium Contamination from Tannery Waste Water

Tannery industries are one of the extensive industrial activities which are the major source of chromium contamination in the environment. Chromium contamination has been an increasing threat to the environment and human health. Therefore, the removal of chromium ions is necessary to save human society. This study is oriented toward the preparation of a new triazole Schiff base derivatives for the remediation of chromium ions. 4,4′-((1E)-1,2-bis ((1H-1,2,4-triazol-3-yl) imino)ethane-1,2-diyl) diphenol was prepared by the interaction between 3-Amino-1H-1,2,4-triazole and 4,4′-Dihydroxybenzil. Then, the produced Schiff base underwent a phosphorylation reaction to produce the adsorbent (TIHP), which confirmed its structure via the different tools FTIR, TGA, ¹HNMR, ¹³CNMR, GC-MS, and Phosphorus-31 nuclear magnetic resonance (³¹P-NMR). The newly synthesized adsorbent (TIHP) was used to remove chromium oxyanions (Cr(VI)) from an aqueous solution. The batch technique was used to test many controlling factors, including the pH of the working aqueous solution, the amount of adsorbent dose, the initial concentration of Cr(VI), the interaction time, and the temperature. The desorption behaviour of Cr(VI) changes when it is exposed to the suggested foreign ions. The maximum adsorption capacity for Cr(VI) adsorption on the new adsorbent was 307.07 mg/g at room temperature. Freundlich’s isotherm model fits the adsorption isotherms perfectly. The kinetic results were well-constrained by the pseudo-second-order equation. The thermodynamic studies establish that the adsorption type was exothermic and naturally spontaneous.