POSS and SSQ Materials in Dental Applications: Recent Advances and Future Outlooks

The Influence of Conditions of Polycondensation in Acid Medium on the Structure of Oligosilsesquioxanes with a Novel Eugenol-Containing Substituent

Eugenol-containing oligoorganosilsesquioxanes were synthesized by the method of hydrolytic polycondensation in an active medium under various reaction conditions. The obtained products were characterized by 29Si NMR spectroscopy and MALDI-TOF spectrometry. It was shown that factors such as the reaction temperature, polycondensation duration, and molar ratio between the initial alkoxysilane monomer and acetic acid may affect the molecular weight characteristics and molecular structure of the formed oligomer, like the content of stressed cyclic units (T3, DTT, TDT) and unstressed silsesquioxane units TnDm. In particular, an increase in the ratio of the initial reagents led to an increase in the content of silsesquioxane Tn fragments from 28.2%mol to 41.7%mol, while the number of strained cyclic structures decreased by more than two times. An increase in the synthesis time is of no particular practical value since it was found that the composition of the oligomers synthesized for 6 h and 12 h was practically identical, as was that of the oligomers synthesized for 24 h and 48 h. A noticeable transition in the oligomer composition was observed only when the synthesis time was changed from 12 h to 24 h. Finally, it was shown that the choice of synthesis temperature had the strongest effect on the oligomer composition. The oligomer synthesized at 95 °C contained the highest amount of silsesquioxane Tn fragments, >77%mol, while a Tn fragment content of ~42%mol was observed during the synthesis at 117 °C. It was shown that silsesquioxanes are devitrified at room temperature (Tg from -6.4 to -10.6 °C), and their thermal stability in an inert atmosphere is 300 °C. The synthesized oligomers, due to the presence of hydroxyl-containing eugenol units, may be promising binders and additives for functional epoxy-silicone paints and coating materials.

Hybrid Hydroxyapatite-Metal Complex Materials Derived from Amino Acids and Nucleobases

Calcium phosphates (CaPs) and their substituted derivatives encompass a large number of compounds with a vast presence in nature that have aroused a great interest for decades. In particular, hydroxyapatite (HAp, Ca10(OH)2(PO4)6) is the most abundant CaP mineral and is significant in the biological world, at least in part due to being a major compound in bones and teeth. HAp exhibits excellent properties, such as safety, stability, hardness, biocompatibility, and osteoconductivity, among others. Even some of its drawbacks, such as its fragility, can be redirected thanks to another essential feature: its great versatility. This is based on the compound's tendency to undergo substitutions of its constituent ions and to incorporate or anchor new molecules on its surface and pores. Thus, its affinity for biomolecules makes it an optimal compound for multiple applications, mainly, but not only, in biological and biomedical fields. The present review provides a chemical and structural context to explain the affinity of HAp for biomolecules such as proteins and nucleic acids to generate hybrid materials. A size-dependent criterium of increasing complexity is applied, ranging from amino acids/nucleobases to the corresponding macromolecules. The incorporation of metal ions or metal complexes into these functionalized compounds is also discussed.

Thermoplastic polyurethane/POSS nanohybrids: Synthesis, morphology, and biological properties

Recent studies show good osteoinductive properties of polyurethanes modified with polyhedral oligomeric silsesquioxanes (POSS). In this work, three types of POSS; propanediolisobutyl-POSS (PHI-POSS), disilanolisobutyl-POSS (DSI-POSS), and octahydroxybutyl-POSS (OCTA-POSS) were chemically incorporated into linear polyurethane based on an aliphatic isocyanate, hexamethylene diisocyanate (HDI), to obtain new nanohybrid PU-POSS materials. The full conversion of POSS was confirmed by Fourier transform infrared spectroscopy (FTIR-ATR) spectra of the model reactions with pure HDI. The materials obtained were investigated by FTIR, SEM-EDS, and DSC. The DSC studies showed the thermoplasticity of the obtained materials and apparently good recovery. 30-day immersion in SBF (simulated body fluid) revealed an increase in the rate of deposition of hydroxyapatite (HAp) for the highest POSS loadings, resulting in thick layers of hydroxyapatite (~60-40 μm), and the Ca/P ratio 1.67 (even 1.785). The structure and properties of the inorganic layer depend on the type of POSS, the number of hard segments, and those containing POSS, which can be tailored by changing the HDI/poly(tetramethylene glycol) (PTMG) ratio. Furthermore, the obtained composites revealed good biocompatibility, as confirmed by cytotoxicity tests conducted on two cell lines; normal human dermal fibroblasts (NHDF) and primary human osteoblasts (HOB). Adherent cells seeded on the tested materials showed viability even after a 48-h incubation. After this time, the population of viable, and proliferating cells exceeded 90%. Bioimaging studies have shown the fibroblast and osteoblast cells were well attached to the surface of the tested materials.

Examining the Water-Polymer Interactions in Non-Isocyanate Polyurethane/Polyhedral Oligomeric Silsesquioxane Hybrid Hydrogels

Non-isocyanate polyurethane (NIPU) networks physically modified with octa(3-hydroxy-3-methylbutyldimethylsiloxy)POSS (8OHPOSS, 0-10 wt%) were conditioned in environments of different relative humidities (up to 97%) to study water-polymer interactions. The equilibrium sorption isotherms are of Brunauer type III in a water activity range of 0-0.97 and are discussed in terms of the Guggenheim (GAB) sorption model. The study shows that the introduction of 8OHPOSS, even in a large amount (10 wt%), does not hinder the water affinity of the NIPU network despite the hydrophobic nature of POSS; this is attributable to the homogenous dispersion of POSS in the polymer matrix. The shift in the urethane-derived carbonyl bands toward lower wavenumbers with a simultaneous shift in the urethane N-H bending bands toward higher wavenumbers exposes the breakage of polymer-polymer hydrogen bonds upon water uptake due to the formation of stronger water-polymer hydrogen bonds. Upon water absorption, a notable decrease in the glass transition temperature (Tg) is observed for all studied materials. The progressive reduction in Tg with water uptake is driven by plasticization and slaving mechanisms. POSS moieties are thought to impact slaving indirectly by slightly affecting water uptake at very high hydration levels.

Study of Water Sorption in Methacryl-Based Polyhedral Oligomeric Silsesquioxane (POSS) Dental Composites Using Molecular Dynamics Simulations

Methacrylate-based polyhedral oligomeric silsesquioxane (POSS) is one of the new composites used as a dental resin. Both monofunctional methacryl isobutyl POSS (MIPOSS) and multifunctional methacryl POSS (MAPOSS) are reported to be possible resins that possess the desired properties for using them as dental resins. Our group's previous comparative study on these two resins showed that the MAPOSS composite has superior mechanical properties compared with the MIPOSS composite. In this article, molecular dynamic simulations (MD simulations) are performed to study the water sorption in these two composites. Water sorption in dental composites can have several effects on the material properties, performance, and longevity of dental restorations. Water sorption in MAPOSS and MIPOSS composites is analyzed by studying the hydrogen bonding, cluster analysis, density projection calculations, and diffusion coefficient calculation of water molecules within the resin matrix. MD simulations results are further used to understand the interaction of water molecules with the resin matrix comprehensively, which governs the composite's mechanical properties. The water sorption study showed that the MAPOSS composite has less water sorption capacity than the MIPOSS composite. The practical significance of this study is to find properties that affect dental restoration and longevity, which can help in the design of better materials for dental applications.