Supramolecular Gold Metallogelators: The Key Role of Metallophilic Interactions

Unusually short unsupported Au(III)⋯Au(III) aurophilic contacts in emissive lanthanide tetracyanoaurate(III) complexes

A series of [Au(CN)4]- salts with lanthanide 2,2'-bipyridine dioxide cations features Au(III) aurophilic interactions between [Au(CN)4]- groups, with Au⋯Au distances of 3.3603(4) Å and 3.4354(4) Å that are shorter than any previously reported. Computations predict the interactions to be weakly attractive; packing effects appear to also contribute to the close contacts. The materials are emissive: there is no Au(III)-based luminescence, but for Ln = Eu the PLQY of 29% is surprisingly high compared to related analogues.

Investigating the Impact of Packing and Environmental Factors on the Luminescence of Pt(N^N^N) Chromophores

Four Pt(II)(N^N^N) compounds featuring DMSO coordination at the fourth position were synthesized. Ligands varied in terms of pyridyl central ring (hydrogen/chlorine substituent) and lateral rings (triazoles with CF3 substitution or tetrazoles). Coordination to pyridine yielded tetra-nitrogen coordinated Pt(II) complexes or Pt-functionalized polymers using commercial 4-pyridyl polyvinyl (PV) or dimethylaminopyridine. Luminescence behaviors exhibited remarkable environmental dependence. While some of the molecular compounds (tetrazole derivatives) in solid state displayed quenched luminescence, all the polymers exhibited 3MMLCT emission around 600 nm. Conversely, monomer emission was evident on poly(methyl methacrylate) or polystyrene matrices. DFT calculations were used to analyze the aggregation of the complexes both at the molecular level and coordinated to the PV polymer and their influence on the HOMO-LUMO gaps.

Solvation-Mediated Self-Assembly from Crystals to Helices of Protic Acyclic Carbene AuI -Enantiomers with Chirality Amplification

Constructing chiral supramolecular assembly and exploring the underlying mechanism are of great significance in promoting the development of circularly polarized luminescence (CPL)-active materials. Herein, we report a solvation-mediated self-assembly from single-crystals to helical nanofibers based on the first protic acyclic (methoxy)(amino)carbenes (pAMACs) AuI -enantiomers driven by a synergetic aurophilic interactions and H-bonds. Their aggregation-dependent thermally activated delayed fluorescence properties with high quantum yields (ΦFL ) up to 95 % were proved to be attributed to packing modes of Au⋅⋅⋅Au dimers with π-stacking or one-dimensional extended Au⋅⋅⋅Au chains. Via drop-casting method, supramolecular P- or M-helices were prepared. Detailed studies on the helices demonstrate that formations of extended helical Au⋅⋅⋅Au molecular chains amplify supramolecular chirality, leading to strong CPL with high dissymmetry factor (|glum |=0.030, ΦFL =67 %) and high CPL brightness (BCPL ) of 4.87×10-3 . Our findings bring new insights into the fabrication of helical structures to improve CPL performance by modifying aurophilic interactions.

Spontaneous Water-Promoted Self-Aggregation of a Hydrophilic Gold(I) Complex Due to Ligand Sphere Rearrangement

Aggregating gold(I) complexes in solution through short aurophilic contacts promotes new photoluminescent deactivation pathways (aggregation-induced emission, AIE). The time dependence of spontaneous AIE is seldom studied. We examine the behavior of complex [Au(N9-hypoxanthinate)(PTA)] (1) in an aqueous solution with the aid of variable-temperature NMR, time-resolved UV-Vis and photoluminescence spectroscopy, and PGSE NMR. The studies suggest that partial ligand scrambling in favor of the ionic [Au(PTA)2][Au(N9-hypoxanthinate)2] pair followed by anion oligomerization takes place. The results are rationalized with the aid of computational calculations at the TD-DFT level of theory and IRI analysis of the electron density.

Mono- and Dinuclear Gold(I) Coumarin Complexes: Luminescence Studies and Singlet Oxygen Production

The 4-(thiolmethyl)-7-(diethylamino)-2H-chromen-2-one ligand has been synthesized and used as chromophore in several mono- and dinuclear gold(I) compounds that contain a phosphane at the second coordination position. Four final products were able to obtain in pure form containing one coumarin and one phosphane ligand in the case of PTA (1,3,5-triaza-7-phosphatricyclo[3.3.1.13.7]decane) and PPh₃ (triphenylphosphine); one coumarin and two gold(I)-phosphane groups in the case of phosphane=DAPTA (3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane) and two coumarin and two gold(I) atoms in the case of phosphane=DPEphos (bis[(2-diphenylphosphino)phenyl]ether), when it was used a diphosphane. Other diphosphane ligands used were not able to give the desired products in pure form. The luminescent properties of the compounds are governed by the fluorescence of the coumarin moiety in all compounds both for measurements carried out in solution and also immobilized in PMMA organic matrix. Phosphorescence emission can be detected in all cases at 77 K both for the uncoordinated coumarin ligand and the gold(I) derivatives, being more favoured in the presence of the gold(I) heavy atom. The compounds have been used as photosensitizers to generate ¹ O₂ with moderate quantum yields values.

Stimuli-Responsive Properties of Supramolecular Gels Based on Pyridyl-N-oxide Amides

The nature of functional groups and their relative position and orientation play an important role in tuning the gelation properties of stimuli-responsive supramolecular gels. In this work, we synthesized and characterized mono-/bis-pyridyl-N-oxide compounds of N-(4-pyridyl)nicotinamide (L₁-L₃). The gelation properties of these N-oxide compounds were compared with the reported isomeric counterpart mono-/bis-pyridyl-N-oxide compounds of N-(4-pyridyl)isonicotinamide. Hydrogels obtained with L₁ and L₃ were thermally and mechanically more stable than the corresponding isomeric counterparts. The surface morphology of the xerogels of di-N-oxides (L₃ and diNO) obtained from the water was studied using scanning electron microscopy (SEM), which revealed that the relative position of N-oxide moieties did not have a prominent effect on the gel morphology. The solid-state structural analysis was performed using single-crystal X-ray diffraction to understand the key mechanism in gel formation. The versatile nature of N-oxide moieties makes these gels highly responsive toward an external stimulus, and the stimuli-responsive behavior of the gels in water and aqueous mixtures was studied in the presence of various salts. We studied the effect of various salts on the gelation behavior of the hydrogels, and the results indicated that the salts could induce gelation in L₁ and L₃ below the minimum gelator concentration of the gelators. The mechanical properties were evaluated by rheological experiments, indicating that the modified compounds displayed enhanced gel strength in most cases. Interestingly, cadmium chloride formed supergelator at a very low concentration (0.7 wt% of L₃), and robust hydrogels were obtained at higher concentrations of L₃. These results show that the relative position of N-oxide moieties is crucial for the effective interaction of the gelator with salts/ions resulting in LMWGs with tunable properties.

Intra- vs Intermolecular Aurophilic Contacts in Dinuclear Gold(I) Compounds: Impact on the Population of the Triplet Excited State

Two series of dinuclear gold(I) complexes that contain two Au-chromophore units (chromophore = dibenzofurane or dimethylfluorene) connected through a diphosphane bridge that differs in the flexibility and length (diphosphane = dppb for 1,4-bis(diphenylphosphino)butane, DPEphos for bis[(2-diphenylphosphino)phenyl]ether, xanthphos for 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene, and BiPheP for 2,2'-bis(diphenylphosphino)-1,1'-biphenyl) have been synthesized and structurally characterized. Their photophysical properties have been carefully investigated, paying attention to the role of the presence, or absence, of aurophilic contacts and their nature (intra- or intermolecular character). This analysis was permitted due to the X-ray crystallographic determination of all of the structures of the compounds discussed herein. The quantum yields of the triplet population, ϕ_T, have been calculated by nanosecond-laser flash photolysis measurements, and we could determine the main role of the character of the aurophilic contacts in the resulting ϕ_T, being especially favored in the presence of intermolecular contacts. Time-dependent density functional theory (TD-DFT) calculations support the absorption and emission assignments and the shorter distance between S₁ and the closest triplet excited state energy in the case of the compounds with a higher triplet-state population.

Highly emissive supramolecular gold(I)-BTD materials

Herein we report the synthesis of three light emitting rod-shaped gold(I) complexes by combining ethynyl-functionalized 2,1,3-benzothiadiazole (BTD), with different N-heterocyclic (imidazole, benzimidazole and phenantroimidazole) carbene gold(I) complexes. As could be determined by single crystal structure determination, the size of the N-heterocyclic carbene affects the relative disposition of the two ligands in the linear gold complexes (nearly perpendicular in the benzimidazole vs. planar in the phenantroimidazole derivative) which translates to different types of interactions between neighbouring units. In fact, the planar conformation in the more π-extended phenantroimidazole carbene allows Au(I) atoms to get sufficiently closer favouring aurophilic interactions. This compound is obtained as two different colour emitting solids which is ascribed to changes in packing modes probably leading to differences in the strength of aurophilic interactions. Interestingly, while the emission in the solid state is almost quenched, the incorporation of the compounds in polymer matrixes enhances the emissive properties of the compounds reaching near unity quantum yields.

Spontaneous in situ generation of photoemissive aurophilic oligomers in water solution based on the 2-thiocytosine ligand

Complexes [Au(S-2-thiocytosinate)(PMe₃)] (2, 2-thiocytosine = 4-amino-2-mercaptopyrimidine) and [Au(S-2-thiocytosine)(PMe₃)](CF₃CO₂) (3) have been prepared by the reaction of [Au(acac)(PMe₃)] (1, acac = acetylacetonate) or [Au(OCOCF₃)(PMe₃)] with 2-thiocytosine, respectively. The equimolecular mixture of complexes 1 and 3 also produces [{Au(PMe₃)}₂(μ-S,N¹-2-thiocytosinate)](CF₃CO₂) (4), which features two distinct [Au(PMe₃)]⁺ groups coordinated to the S and N¹ atoms of the heterocycle. Complex 4 experiences a ligand redistribution process in water solution that liberates [Au(PMe₃)₂](CF₃CO₂) and a brightly coloured and luminescent species of [Au_n(μ-S,N¹-2-thiocytosinate)_n] stoichiometry, presumably as a tetraauracycle (n = 4).

The doubly-aurated [{Au(PMe₃)}₂(μ-S,N¹-2-thiocytosinate)]⁺ cation breaks up in water solution to form a strongly-coloured and photoluminescent neutral aurophilic oligomer.

Aggregation versus Biological Activity in Gold(I) Complexes. An Unexplored Concept

The aggregation process of a series of mono- and dinuclear gold(I) complexes containing a 4-ethynylaniline ligand and a phosphane at the second coordination position (PR3-Au-C≡CC6H4-NH2, complexes 1-5, and (diphos)(Au-C≡CC6H4-NH2)2, complexes 6-8), whose biological activity was previously studied by us, has been carefully analyzed through absorption, emission, and NMR spectroscopy, together with dynamic light scattering and small-angle X-ray scattering. These experiments allow us to retrieve information about how the compounds enter the cells. It was observed that all compounds present aggregation in fresh solutions, before biological treatment, and thus they must be entering the cells as aggregates. Inductively coupled plasma atomic emission spectrometry measurements showed that mononuclear complexes are mainly found in the cytosolic fraction; the dinuclear complexes are mainly found in a subsequent fraction composed of nuclei and cytoskeleton. Additionally, dinuclear complex 8 affects the actin aggregation to a larger extent, suggesting a cooperative effect of dinuclear compounds.

Intracellular Dynamic Assembly of Deep-Red Emitting Supramolecular Nanostructures Based on the Pt…Pt Metallophilic Interaction

Many drug delivery systems end up in the lysosome because they are built from covalent or kinetically inert supramolecular bonds. To reach other organelles, nanoparticles hence need to either be made from a kinetically labile interaction that allows re-assembly of the nanoparticles inside the cell following endocytic uptake, or, be taken up by a mechanism that short-circuits the classical endocytosis pathway. In this work, the intracellular fate of nanorods that self-assemble via the Pt…Pt interaction of cyclometalated platinum(II) compounds, is studied. These deep-red emissive nanostructures (638 nm excitation, ≈700 nm emission) are stabilized by proteins in cell medium. Once in contact with cancer cells, they cross the cell membrane via dynamin- and clathrin-dependent endocytosis. However, time-dependent confocal colocalization and cellular electron microscopy demonstrate that they directly move to mitochondria without passing by the lysosomes. Altogether, this study suggests that Pt…Pt interaction is strong enough to generate emissive, aggregated nanoparticles inside cells, but labile enough to allow these nanostructures to reach the mitochondria without being trapped in the lysosomes. These findings open new venues to the development of bioimaging nanoplatforms based on the Pt…Pt interaction.

Recent Progress on Supramolecular Luminescent Assemblies Based on Aurophilic Interactions in Solution

The development of supramolecular systems showing aurophilic interactions in solution is gaining much attention in the last years. This is due to the intriguing photophysical properties of gold(I) complexes, which usually confer to these supramolecular assemblies interesting luminescent properties, as well as the possibility of morphological modulation, through fine tuning of inter- and intramolecular aurophilic interactions, in synergy with the formation of other supramolecular contacts. In this work, an overview of the advances made in this area since 2015 is presented. A large variety of systems showing different spectroscopical and structural topologies has been reported. Moreover, these supramolecular assemblies have proven to be useful in a wide range of applications.

Time-Dependent Molecular Rearrangement of [Au(N9-adeninate)(PTA)] in Aqueous Solution and Aggregation-Induced Emission in a Hydrogel Matrix

An in-depth study of the molecular rearrangement of the complex [Au(N⁹-adeninate)(PTA)] (1), promoted in aqueous solution, is presented. This complex, which has been previously described as forming dimers in its crystalline form, is also demonstrated as being able to assemble into an infinite Au^I···Au^I chain polymer. The structural motifs are tentatively related to the dramatic modification of the photoemissive properties of 1 in water solution at long times, with the aid of UV-vis and photoluminescence measurements, PGSE-NMR, and theoretical calculations. A subtle equilibrium in favor of aurophilically governed aggregates has been envisaged as the driving force of the molecular rearrangement. Furthermore, 1 has been explored as an additive of the hydrogel of [Au(N⁹-adeninate)(PMe₃)] (2) for a further tuning of its photophysical properties without loss of the gel texture.

Gold(i)-doped films: new routes for efficient room temperature phosphorescent materials

The synthesis of four novel gold(i)-phosphane complexes coordinated to 9-phenanthrene chromophore has been carried out through the reaction of 9-phenanthreneboronic acid and the corresponding AuClPR₃ (PR₃ = PPh₃ for triphenylphosphane (1a); 1,4-bis(diphenylphosphanyl)butane or dppb (2b); bis(diphenylphosphanyl)acetylene or dppa (2c); (AuCl)₂(diphos) (diphos = bis(diphenylphosphanyl)methane or dppm (3)) sources. The X-ray crystal structures of compounds 1a and 2b show the existence of MOF-like intermolecular assemblies that contain empty inner cavities in the absence of aurophilic contacts. In contrast, the formation of a tetranuclear complex with intramolecular aurophilic interactions was evidenced for 3. Photophysical characterization indicates dual emission in all gold(i) complexes when oxygen is removed from the sample, while only fluorescence emission is recorded for the uncoordinated ligand. The introduction of the compounds within PMMA and Zeonex was assayed, and luminescent films containing gold(i) complexes where phosphorescence is the sole pathway for emission are obtained, instead of the dual emission (with significant fluorescence contribution) recorded in solution.

Fluorination Effects in XPhos Gold(I) Fluorothiolates

Gold phosphine derivatives such as thiolates have been recently proposed as catalysts or catalyst precursors. The relevance of the supramolecular environment on the fine-tuning of the catalytical activity on these compounds incentivizes the use of tools that are convenient to characterize in detail the non-covalent landscape of the systems. Herein, we show the molecular and supramolecular diversity caused by the changes in the fluorination pattern in a family of new XPhos goldfluorothiolate derivatives. Furthermore, we studied the supramolecular interactions around the Au centers using quantum chemical topology tools, in particular the quantum theory of atoms in molecules (QTAIM) and the non-covalent interaction index. Our results give detailed insights into the fluorination effects on the strength of intramolecular and intermolecular interactions in these systems. We have also used QTAIM delocalization indexes to define a novel hapticity indicator. Finally, we assessed the trans influence of the fluorothiolates on the phosphine in terms of the change in the δ 31P-NMR. These results show the feasibility of the use of fluorination in the modulation of the electronic properties of Buchwald phosphine gold(I) compounds, and thereby its potential catalytic activity.

Multidisciplinary study on the hydrogelation of the digold(i) complex [{Au(9N-adeninate)}2(μ-dmpe)]: optical, rheological, and quasi-elastic neutron scattering perspectives

Non-conventional experimental techniques such as rheology or QENS will aid synthetic inorganic chemists to broaden the knowledge on gold(i) hydrometallogels’ structure and properties and to understand their expected relationship.

Stimuli-Sensitive Aggregation-Induced Emission of Organogelators Containing Mesogenic Au(I) Complexes

As the luminescence from conventional organic luminophores is typically quenched in constrained environments, the aggregation-induced emission (AIE) phenomenon is of interest for the development of materials that exhibit strong luminescence in condensed phases. Herein, new bismesogenic Au complexes were developed as organogelators and their photophysical properties, including their AIE characteristics, were investigated in organogels and crystals. The crystals of the gold complexes exhibited room-temperature phosphorescence with relatively high quantum yields. Moreover, the gold complexes also showed photoluminescence in the organogels and we demonstrated that the reversible switching of the luminescence intensity was induced by the sol-gel phase transition. The intense photoluminescence in the crystal and gel was induced by the restricted internal motion of the luminophore in the molecular aggregates. However, in the sol, the network structure of the organogel was destroyed and the nonradiative deactivation of the excited states was enhanced. As a result, we can conclude that the switching of the luminescence intensity was induced by changes in the aggregated structures of the molecules. The developed Au-complex-based gelators are excellent candidates for the realization of stimuli-responsive soft and smart luminescent materials.

Facile morphology control of gold(0) structures from aurophilic assemblies

Different gold microstructures have been synthesized by using supramolecular gold(i) organometallic compounds as templates and Ag nanoparticles as reducing agents. The use of fibers resulting from supramolecular assemblies of neutral gold(i) compounds gives rise to the formation of microrods. The use of supramolecular assemblies from ionic molecules results in spherical or square-based prism gold microstructures, depending on the shape of the supramolecular gold(i) precursor assembly. In addition to temperature and reaction time, solvents exert a strong influence on the formation and morphology of gold structures, as borne out by the example that well-defined star-like morphologies have been obtained in chloroform.

Exploring the Self-Assembled Tacticity in Aurophilic Polymeric Arrangements of Diphosphanegold(I) Fluorothiolates

Despite the recurrence of aurophilic interactions in the solid-state structures of gold(I) compounds, its rational control, modulation, and application in the generation of functional supramolecular structures is an area that requires further development. The ligand effects over the aurophilic-based supramolecular structures need to be better understood. This paper presents the supramolecular structural diversity of a series of new 1,3-bis(diphenylphosphane)propane (dppp) gold(I) fluorinated thiolates with the general formula [Au₂(SR_F)₂(μ-dppp)] (SR_F = SC₆F₅ (1); SC₆HF₄-4 (2); SC₆H₃(CF₃)₂-3,5 (3); SC₆H₄CF₃-2 (4); SC₆H₄CF₃-4 (5); SC₆H₃F₂-3,4 (6); SC₆H₃F₂-3,5 (7); SC₆H₄F-2 (8); SC₆H₄F-3 (9); SC₆H₄F-4 (10)). These compounds were synthesized and characterized, and six of their solid-state crystalline structures were determined using single-crystal X-ray diffraction. In the crystalline arrangement, they form aurophilic-bridged polymers. In these systems, the changes in the fluorination patterns of the thiolate ligands tune the aurophilic-induced self-assembly of the compounds causing tacticity and chiral differentiation of the monomers. This is an example of the use of ligand effects on the tune of the supramolecular association of gold complexes.

Real-Time Monitoring of Hierarchical Self-Assembly and Induction of Circularly Polarized Luminescence from Achiral Luminogens

Constructing artificial helical structures through hierarchical self-assembly and exploring the underlying mechanism are important, and they help gain insight from the structures, processes, and functions from the biological helices and facilitate the development of material science and nanotechnology. Herein, the two enantiomers of chiral Au(I) complexes ( S)-1 and ( R)-1 were synthesized, and they exhibited impressive spontaneous hierarchical self-assembly transitions from vesicles to helical fibers. An impressive chirality inversion and amplification was accompanied by the assembly transition, as elucidated by the results of in situ and time-dependent circular dichroism spectroscopy and scanning electron microscope imaging. The two enantiomers could serve as ideal chiral templates to co-assemble with other achiral luminogens to efficiently induce the resulting co-assembly systems to show circularly polarized luminescence (CPL). Our work has provided a simple but efficient way to explore the sophisticated self-assembly process and presented a facile and effective strategy to fabricate architectures with CPL properties.

Preparation and Antitumoral Activity of Au-Based Inorganic-Organometallic Nanocomposites

The synergy between gelator molecules and nanostructured materials is currently a novel matter of study. The possibility to carefully design the skeleton of the molecular entity as well as the nanostructure's morphological and chemical features offers the possibility to prepare a huge variety of nanocomposites with properties potentially different than just the sum of those of the individual building blocks. Here we describe the synthesis and characterization of nanocomposites made by the unconventional combination of phosphine-Au(I)-alkynyl-based organometallic gelating molecules and plasmonic Au nanoparticles. Our results indicate that the interaction between the two moieties leads to a significant degree of aggregation in both hydrophilic and hydrophobic media, either when using DAPTA or PTA-based organometallic molecules, with the formation of a sponge-like hybrid powder upon solvent evaporation. The biological activity of the nanocomposites was assessed, suggesting the existence of a synergetic effect evidenced by the higher cytotoxicity of the hybrid systems with respect to that of any of their isolated counterparts. These results represent a preliminary proof-of-concept for the exploitation of these novel nanocomposites in the biomedical field.

Supramolecular tripodal Au(i) assemblies in water. Interactions with a pyrene fluorescent probe

The synthesis of three gold(i) tripodal complexes derived from tripropargylamine and containing the water soluble phosphines PTA (1,3,5-triaza-7-phosphaadamantane), DAPTA (3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane) and TPPTS (triphenylphosfine-3,3′,3′′-trisulfonic acid trisodium salt) is described here.

Balancing ionic and H-bonding interactions for the formation of Au(i) hydrometallogels

Complex [Au(⁹N-adenine)(PMe₃)](CF₃CO₂) displays a supramolecular structure built up through ionic, π-stacking, C–H⋯O, C–H⋯N and C–H⋯Au interactions. This complex forms a stable hydrometallogel consisting of straight molecular nanowires.

Electron Dose-Controlled Formation, Growth, and Assembly of Nanoclusters and Nanoparticles from Aurophilic Au(I)-Thiolate Ensemble on Surfaces

The ability to precisely control electron irradiation-induced formation, growth, and assembly of nanoclusters or nanoparticles on a solid surface is important for design and creation of catalytically or chemically active surface sites and interfaces free from chemical reducing agents. Here, we show the results of an investigation of the electron dose-controlled formation, growth, and assembly of nanoclusters and nanoparticles in a molecularly assembled thin film of Au(I)-thiolate motifs on a substrate, highlighting an in situ monitoring of the evolution of morphology under controlled electron dose. With aurophilic motifs of Au(I)-thiolate being confined by electrostatic interactions, the sizes of Au nanoclusters and nanoparticles were shown to increase with electron dose, revealing a propensity of a string alignment of the grown nanoclusters and nanoparticles. This growth preference to one-dimensional assembly is supported by the analysis of the surface reaction kinetics in terms of the surface density of electron dose for the growth of the nanoclusters and nanoparticles. The electron dose-controlled size-focusing and directional assembly of nanoclusters and nanoparticles may be exploited as new strategy for the precise control of nanoclusters or nanoparticles and their assemblies on solid surfaces not only free from chemical reducing agent but also with the ability of visual monitoring of the morphological evolution during growth.

Nanoscale Lacing by Electrons

The ability to harness the optical or electrical properties of nanoscale particles depends on their assembly in terms of size and spatial characteristics which remains challenging due to lack of size focusing. Electrons provide a clean and focusing agent to initiate the assembly of nanoclusters or nanoparticles. Here an intriguing route is demonstrated to lace gold nanoclusters and nanoparticles in string assembly through electron-initiated nucleation and aggregative growth of Au(I)-thiolate motifs on a thin film substrate. This size-focused assembly is demonstrated by controlling the electron dose under transmission electron microscopic imaging conditions. The Au(I)-thiolate motifs, in combination with the molecularly mediated alignment, facilitate the interstring electrostatic and intrastring aurophilic interactions, which functions as a molecular template to aid electron-initiated 1D lacing. The findings demonstrate a hierarchical route for the 1D assemblies with size and spatial tunable catalytic, optical, sensing, and diagnostic properties.

Aggregation induced emission of gold(i) complexes in water or water mixtures

Gold(i) complexes are an expanding area of investigation due to the possibility of giving rise to supramolecular aggregates with particular morphologies that can be modulated together with their luminescent properties.

Effect of solvent polarity on the spectroscopic properties of an alkynyl gold(i) gelator. The particular case of water

The spectroscopic properties of an aurophilic hydrogelator depend on solvent polarity and concentration.

Tuning supramolecular aurophilic structures: the effect of counterion, positive charge and solvent

The synthesis of different cationic gold(i) complexes gave rise to the formation of unexpected supramolecular assemblies in water going from rod-like structures to vesicles and square-like structures.