Implant Survival in Immediately Loaded Full-Arch Rehabilitations Following an Anatomical Classification System-A Retrospective Study in 1200 Edentulous Jaws

Immediate Loading Implant-Supported Fixed Full-Arch Rehabilitation Using a New Clinical Decision-Support System: A Case Series

Background Implant-supported full-arch rehabilitation is an effective treatment for edentulous patients. It restores mastication, facial aesthetics, and psychological well-being. Patient-related outcome measures support the validity of this approach, emphasizing the importance of effective prosthodontic interventions for this patient population. This study aims to present a case series for fixed implant-supported full-arch rehabilitation using the new Carames classification (CC). Methods A total of seven patients with generalized periodontitis or non-restorable multiple teeth were indicated for extraction and replacement with a fixed full-arch implant-supported prosthesis. According to the Carames classification, most cases were categorized as CCI or CCII classes for both the upper and lower jaws. Before the surgery, screw-retained provisional complete dentures were constructed and adjusted for the vertical occlusal dimension and smile lines. After the extractions, 70 implants were immediately placed in one or both arches for the seven patients, followed by bone grafts with the dual-zone grafting technique. Multi-unit abutments were then placed and welded to a metal bar for stable fixation. The provisional denture was fitted snugly over the metal bar for immediate functional loading. After three months of healing, it was used as a biocopy to fabricate the final prosthesis. The implant loss and the peri-implant marginal tissue health status were assessed annually for three years. Statistical analysis compared the marginal bone loss as a change from the baseline over the year. Results No implant or prosthesis loss was reported over the three years. Peri-implant marginal tissue health showed promising results without bleeding and suppuration on probing and probing depths between 3 and 3.5 millimeters. Marginal bone loss was minimal over the three years, with some cases showing bone gain. Conclusion Using the Carames classification as a clinical decision support system in implant-supported full-arch rehabilitation showed promising results in peri-implant tissue health and no implant loss during three years of follow-up. The implant placement and prosthesis fabrication protocol in this study could be valuable for further research.

Accuracy of different digital acquisition methods in complete arch implant-supported prostheses: An in vitro study

STATEMENT OF PROBLEM

Digital methods such as intraoral scanners for recording the location of implants supporting complete arch prostheses have limitations. Photogrammetry devices should be able to digitize implant positions accurately, but standardized comparisons between different digital acquisition methods are lacking.

PURPOSE

The purpose of this in vitro study was to compare the repeatability of different digital acquisition methods for complete arch prostheses supported by 6 and 4 implants.

MATERIAL AND METHODS

A master cast was created with 6 and 4 dental implants with multiunit abutments to obtain the master digital casts. The evaluated devices were the industrial high-resolution 12-megapixel scanner (reference) Atos Compact Scan 12M (GOM), the laboratory scanners D2000 (3Shape A/S) and S900 Arti (Zirkonzahn), the photogrammetry devices iCam (iMetric4D) and PIC (PIC Dental), and the intraoral scanners TRIOS 3 (3Shape A/S) and iTero Element 5D (Align Technology). The resulting files were imported to a computer-aided design software program (exocad GmbH) to obtain the implant replicas as standard tessellation language (STL) files. These files were imported into a software program (Geomagic Control X) and superimposed per group through the best-fit algorithm to determine repeatability, defined as the closeness of agreement between each group's scanned results as root mean square (RMS) values. The normality of distribution was tested by the Shapiro-Wilk normality test, and the Kruskal-Wallis test with adjustment with the Bonferroni correction method was used accordingly (α=.05).

RESULTS

The repeatability means and 95% confidence intervals for the 4 implant scans were: 1.07 µm (0.86; 1.29) for GOM, 2.05 µm (1.89; 2.21) for D2000, 3.61 µm (3.23; 3.99) for S900, 7.01 µm (6.11; 7.91) for iCam, 5.18 µm (4.6; 5.76) for PIC, 20.52 µm (18.33; 22.72) for TRIOS 3, and 20.5 µm (17.37; 23.63) for iTero. Statistically significant differences were found between devices, except for iCam versus PIC, GOM versus S900, iCam versus D2000, PIC versus D2000, and TRIOS 3 versus iTero. The repeatability means and 95% confidence intervals for the 6 implant groups were: 1.36 µm (1.08; 1.65) for GOM, 3.17 µm (3.01; 3.33) for D2000, 2.15 µm (2.04; 2.25) for S900, 8.67 µm (8.06; 9.28) for iCam, 13.88 µm (12.62; 15.14) for PIC, 40.32 µm (36.29; 44.36) for TRIOS 3, and 38.86 µm (34.01; 43.71) for iTero. Statistically significant differences were detected between devices, except for S900 versus GOM, PIC versus iCam, and iTero versus TRIOS 3.

CONCLUSIONS

The results suggest that photogrammetry could be a suitable alternative for recording implant locations of complete arch prostheses supported by 4 or 6 implants, with better repeatability than intraoral scanners. Increasing the number of implants decreased the repeatability of every device tested except the laboratory scanners.

Influence of Implant Macro-Design, -Length, and -Diameter on Primary Implant Stability Depending on Different Bone Qualities Using Standard Drilling Protocols-An In Vitro Analysis

(1) Background: Primary implant stability is vital for successful implant therapy. This study explores the influence of implant shape, length, and diameter on primary stability in different bone qualities. (2) Methods: Three implant systems (two parallel-walled and one tapered) with various lengths and diameters were inserted into polyurethane foam blocks of different densities (35, 25, 15, and 10 PCF) using standard drilling protocols. Primary stability was assessed through insertion torque (IT) and resonance frequency analysis (RFA). Optimal ranges were defined for IT (25 to 50 Ncm) and RFA (ISQ 60 to 80). A comparison of implant groups was conducted to determine adherence to the optimal ranges. (3) Results: Implant macro-design, -length, and -diameter and bone block density significantly influenced IT and RFA. Optimal IT was observed in 8/40 and 9/40 groups for the parallel-walled implants, while the tapered implant achieved optimal IT in 13/40 groups (within a 25-50 Ncm range). Implant diameter strongly impacted primary stability, with sufficient stability achieved in only one-third of cases despite the tapered implant's superiority. (4) Conclusions: The findings highlight the need to adapt the drilling protocol based on diverse bone qualities in clinical practice. Further investigations should explore the impact of these adapted protocols on implant outcomes.

Immediate Functional Loading with Full-Arch Fixed Implant-Retained Rehabilitation in Periodontal Patients: Clinical Study

(1) Background. The immediate functional loading of implants is a clinical procedure used for treating periodontal edentulous patients. This clinical study aimed to evaluate the clinical outcomes of the immediate functional loading of implants with fully fixed rehabilitations in compromised periodontal patients. (2) Methods. Three hundred and five implants IPX screw implants were placed in 27 periodontal patients using an immediate functional loading protocol with fixed rehabilitations. All patients had a previous history of periodontitis, four patients (14.8%) were smokers and seven patients (25.9%) suffered from chronic medical conditions. (3) Results. Implant and prosthetic clinical findings were evaluated during a mean period of 41.3 ± 19.6 months. No implants were lost during the clinical follow-up. The cumulative survival rate for all implants was 100%. Regarding the prostheses designed, a total of 54 fixed prostheses were placed in the 27 patients immediately after the surgery. Forty-four hybrid fixed prostheses (81.5%) and 10 fixed rehabilitations (18.5%) were placed in the patients. The mean marginal bone loss was 1.51 ± 1.16 mm, ranging from 0 to 3.5 mm during the follow-up evaluation. Thirty-one implants (10.2%) in 10 patients (37%) were associated with peri-implantitis. Five patients (18.5%) showed some kind of technical complications (loss/fracture of the prosthetic screw, acrylic resin fracture, ceramic chipping). (4) Conclusions. The clinical outcomes of this study demonstrate that fixed rehabilitation by immediate functional loading of implants is considered a predictable procedure.

Survival of conventional dental implants in the edentulous atrophic maxilla in combination with zygomatic implants: a 20-year retrospective study

PURPOSE

Implant-supported prosthetic rehabilitation in the resorbed maxilla is a great challenge. The aim of this study was to determine the survival rate of conventional anterior implants placed in combination with zygomatic implants according to the Brånemark technique, and to identify risk factors for implant failure.

METHODS

We collected data retrospectively from 72 consecutive patients who received treatment from 1998 to 2018 at our center, according to Brånemark's original technique. Kaplan-Meier analysis was conducted to assess survival rate, and a survival regression model was used with the patient as the random factor, applying the Weibull distribution.

RESULTS

A total of 236 maxillary anterior implants were included, with a mean follow-up of 12.1 years. Kaplan-Meier analysis showed overall cumulative survival rates of 95.3% at 1 year, 94.8% at 2 years, 93.0% at 5 years, 90.5% at 10 years, 81.6% at 15 years, and 67.7% at 20 years. Survival regression showed an association between bruxism and implant failure as well as implants bearing an overdenture. Implants with length ≤ 10 mm had a significantly lower survival time. No significant association was found between the number of anterior implants and survival rate.

CONCLUSIONS

We found acceptable long-term anterior conventional implant survival. Significant risk factors for failure were bruxism, overdentures, and implants shorter than 10 mm.

Guided Bone Regeneration in the Edentulous Atrophic Maxilla Using Deproteinized Bovine Bone Mineral (DBBM) Combined with Platelet-Rich Fibrin (PRF)-A Prospective Study

Background: Bone regeneration procedures represent a major challenge in oral surgery. This study aimed to evaluate a composite PRF/particulate xenograft in guided bone regeneration. Methods: Edentulous patients with horizontal ridge deficiencies in the anterior maxilla and candidates to an immediate-loading full-arch rehabilitation were included. Horizontal linear measurements indicating bone gain were assessed from computer beam computer tomography (CBCT) scans obtained at pre-surgery, post-surgery, and the 12-month follow-up. Mean bone values were presented as mean ± 95% CI. Non-parametric tests were used as appropriate, and the effect size was calculated with Cohen’s d repeated measures. Results: Eighteen patients were rehabilitated with 72 implants. The mean horizontal bone width was 4.47 [4.13–4.80] mm pre-surgically, 9.25 [8.76–9.75] mm post-surgically, and 7.71 [7.28–8.14] mm 12 months after. Conclusions: PRF associated with a xenograft seems to promote an effective horizontal bone gain. Randomized clinical trials are needed to confirm the benefits of this surgical approach.