Biomaterial Enhanced Regeneration Design Research for Skin and Load Bearing Applications

Biomedical applications, perspectives and tag design concepts in the cell - silent Raman window

Spectroscopic studies increasingly employ Raman tags exhibiting a signal in the cell - silent region of the Raman spectrum (1800-2800 cm-1), where bands arising from biological molecules are inherently absent. Raman tags bearing functional groups which contain a triple bond, such as alkyne and nitrile or a carbon-deuterium bond, have a distinct vibrational frequency in this region. Due to the lack of spectral background and cell-associated bands in the specific area, the implementation of those tags can help overcome the inherently poor signal-to-noise ratio and presence of overlapping Raman bands in measurements of biological samples. The cell - silent Raman tags allow for bioorthogonal imaging of biomolecules with improved chemical contrast and they have found application in analyte detection and monitoring, biomarker profiling and live cell imaging. This review focuses on the potential of the cell - silent Raman region, reporting on the tags employed for biomedical applications using variants of Raman spectroscopy.

Designing a Biomaterial Approach to Control the Adaptive Response to a Skin Injury

The goal of this review is to explain how to design a biomaterial approach to control the adaptive response to injury, with an emphasis on skin wounds. The strategies will be selected based on whether they have a reasonable probability of meeting the desired clinical outcome vs. just comparing the pros and cons of different strategies. To do this, the review will look at the normal adaptive response in adults and why it does not meet the desired clinical outcome in most cases. In addition, the adaptive response will be looked at in cases where it does meet the clinical performance requirements including animals that regenerate and for fetal wound healing. This will lead to how biomaterials can be used to alter the overall adaptive response to allow it to meet the desired clinical outcome. The important message of the review is that you need to use the engineering design process, not the scientific method, to design a clinical treatment. Also, the clinical performance requirements are functional, not structural. The last section will give some specific examples of controlling the adaptive response for two skin injuries: burns and pressure ulcers. For burns, it will cover some preclinical studies used to justify a clinical study as well as discuss the results of a clinical study using this system. For pressure ulcers, it will cover some preclinical studies for two different approaches: electrical stimulation and degradable/regenerative scaffolds. For electrical stimulation, the results of a clinical study will be presented.

An Up-to-Date Review of Biomaterials Application in Wound Management

Whether they are caused by trauma, illness, or surgery, wounds may occur throughout anyone's life. Some injuries' complexity and healing difficulty pose important challenges in the medical field, demanding novel approaches in wound management. A highly researched possibility is applying biomaterials in various forms, ranging from thin protective films, foams, and hydrogels to scaffolds and textiles enriched with drugs and nanoparticles. The synergy of biocompatibility and cell proliferative effects of these materials is reflected in a more rapid wound healing rate and improved structural and functional properties of the newly grown tissue. This paper aims to present the biomaterial dressings and scaffolds suitable for wound management application, reviewing the most recent studies in the field.

Immuno-modulatory biomaterials as anti-inflammatory therapeutics

Biocompatible and biodegradable biomaterials are used extensively in regenerative medicine and serve as a tool for tissue replacement, as a platform for regeneration of injured tissue, and as a vehicle for delivery of drugs. One of the key factors that must be addressed in developing successful biomaterial-based therapeutics is inflammation. Whilst inflammation is initially essential for wound healing; bringing about clearance of debris and infection, prolonged inflammation can result in delayed wound healing, rejection of the biomaterial, further tissue damage and increased scarring and fibrosis. In this context, the choice of biomaterial must be considered carefully to minimise further induction of inflammation. Here we address the ability of the biomaterials themselves to modulate inflammatory responses and outline how the physico-chemical properties of the materials impact on their pro and anti-inflammatory properties (Fig. 1).

The Effect of Size of Materials Formed or Implanted In Vivo on the Macrophage Response and the Resultant Influence on Clinical Outcome

Both the chemistry and size of a material formed in vivo, or an implanted biomaterial, can alter the in vivo host response. Within the size range covered within this review, over 1 μm, chemistry is only important if the solid material is unstable and leeching small molecules. The macrophage activity and the resultant inflammatory response, however, are related to the size of the solid material. The premise of this review is that differences in size of the solid material, in different cases, can be the reason why there is some individual-to-individual variation in response. Specifically, the inflammatory response is enhanced when the size is between 1-50 μm. This will be looked at for three configurations: spherical particulate (silicone oil or gel from breast implants), elongated particulate (monosodium urate [MSU] crystals in gout or in kidney stones), and fibers (e.g., polyester used in fabric implants). These specific examples were selected because many still believe that the clinical outcome for each is controlled by the surface chemistry, when in fact it is the size. In each case, specific studies will be highlighted to either show a mechanism for creating different sizes and therefore a differential biological response (first three) or how changing the size and shape (diameter and spacing of fibers, in this example) can affect the response and can help explain the different responses to fabric implants found in vivo within the 1-50 μm size range. It was found that polyester fibers under 70 μm had a significant increase in macrophage response. Further, it was found that compounds found in synovial fluid could limit MSU crystal size. In addition, it was shown that plasma with low triglyceride levels emulsifies silicone oils to a greater extent than plasma with higher triglyceride levels. Therefore, in three cases it appears that differences in the inflammatory response between individuals and between different implants could be explained just by the size of the material formed or implanted.

Human-Derived Scaffold Components and Stem Cells Creating Immunocompatible Dermal Tissue Ensuing Regulated Nonfibrotic Cellular Phenotypes

Regeneration of large-sized acute and chronic wounds provoked by severe burns and diabetes is a major concern worldwide. The availability of immunocompatible matrix with a wide range of regenerative medical applications, more specifically, for nonhealing chronic wounds is an unmet clinical need. Extrapolating the in vitro tissue engineering knowledge for in vivo guided wound regeneration could be a meaningful approach. This study aimed to develop a completely human-derived and minimally immune-responsive scaffold comprising of acellular amniotic membrane (AM), fibrin (FIB) and hyaluronic acid (HA), termed AMFIBHA. The potential for in vivo guidance of skin regeneration was validated through in vitro dermal tissue assembly on the combination scaffold by growing human fibroblasts, differentiated from human adipose tissue-derived mesenchymal stem cells (hADMSCs). An effective method was standardized for obtaining decellularized amnion (dAM) for assuring better immuno-compatibility. The biochemical stability of dAM upon plasma sterilization (pdAM) confirms its suitability for both in vitro and in vivo tissue engineering. The problem of poor handling characteristics was solved by combining the dried dAM with fibrin derived from a clinically used fibrin sealant kit. An additional constituent HA, derived from human umbilical cord tissue, imparts the required water absorption and retention property for better cell migration and growth. Post sterilization, the combination scaffold AMFIBHA demonstrated hemo-/cytocompatibility, confirming the absence of detergent residuals. Upon long-term (20 days/40 days) culture of hADMSC-derived fibroblasts, the suppleness of generated tissue was established by demonstrating regulated deposition of collagen, elastin, and glycosaminoglycans using both qualitative and quantitative measurements. Regulated expressions of transforming growth factors-beta 1 (TGF-β1) & TGF-β3, alpha smooth muscle actin (α-SMA), fibrillin-1, collagen subtypes, and elastin suggest non-fibrotic fibroblast phenotype, which could be an effect of microenvironment endowed by the AM, FIB, and HA. In burn wound model experiments, immune response to cellular AM was prominent as compared to untreated/sham control wounds and decellularized AM-treated and AMFIBHA-treated wounds, ensuring biocompatibility. Wound regeneration with complete epithelialization, angiogenesis, development of rete pegs, and other skin appendages were clearly visualized in 28 days after treating large-sized (4 × 4 cm²), debrided, full-thickness third-degree burn wounds, indicating guided wound regeneration potential of AMFIBHA dermal substitute.

Preparation of ciprofloxacin loaded zein conduits with good mechanical properties and antibacterial activity

Conduit scaffolds have potential applications in tissue engineering as nerve conduits, urological stent and blood vessel graft. Zein is a well-reported biopolymer in tissue engineering and drug delivery systems. Herein, we prepared ciprofloxacin loaded zein conduits using a facile rolling method. Zein conduits (ZCs) were evaluated for physical structure, porosity, bending stiffness, degradation, drug release, in vitro and in vivo antibacterial efficacy and cells toxicity. ZCs showed porous structure with porosity > 60 % and good mechanical strength with bending stiffness of 28.54 N.mm². Slow enzymatic degradation (87 % in 30 days) was also observed for ZCs. Slow release of ciprofloxacin up to 42 days was observed that could assure prevention of post-implantation infection. In vitro and in vivo antibacterial study verified the short-time and long-time antibacterial efficacy of zein conduits on Gram-positive and Gram-negative bacteria. Live/dead measurement and CCK-8 assay on L929 cells demonstrated good cell compatibility for all zein conduits (>90 % cell viability and cells proliferation in 3 days). Overall, the rolling method could be exploited for preparation of ciprofloxacin loaded zein conduits, which had the potential for tissue engineering applications.