Compositional and in Vitro Evaluation of Nonwoven Type I Collagen/Poly-dl-lactic Acid Scaffolds for Bone Regeneration

Potential of Atlantic Codfish (Gadus morhua) Skin Collagen for Skincare Biomaterials

Collagen is the major structural protein in extracellular matrix present in connective tissues, including skin, being considered a promising material for skin regeneration. Marine organisms have been attracting interest amongst the industry as an alternative collagen source. In the present work, Atlantic codfish skin collagen was analyzed, to evaluate its potential for skincare. The collagen was extracted from two different skin batches (food industry by-product) using acetic acid (ASColl), confirming the method reproducibility since no significant yield differences were observed. The extracts characterization confirmed a profile compatible with type I collagen, without significant differences between batches or with bovine skin collagen (a reference material in biomedicine). Thermal analyses suggested ASColl's native structure loss at 25 °C, and an inferior thermal stability to bovine skin collagen. No cytotoxicity was found for ASColl up to 10 mg/mL in keratinocytes (HaCaT cells). ASColl was used to develop membranes, which revealed smooth surfaces without significative morphological or biodegradability differences between batches. Their water absorption capacity and water contact angle indicated a hydrophilic feature. The metabolic activity and proliferation of HaCaT were improved by the membranes. Hence, ASColl membranes exhibited attractive characteristics to be applied in the biomedical and cosmeceutical field envisaging skincare.

Collagen Alignment via Electro-Compaction for Biofabrication Applications: A Review

As the most prevalent structural protein in the extracellular matrix, collagen has been extensively investigated for biofabrication-based applications. However, its utilisation has been impeded due to a lack of sufficient mechanical toughness and the inability of the scaffold to mimic complex natural tissues. The anisotropic alignment of collagen fibres has been proven to be an effective method to enhance its overall mechanical properties and produce biomimetic scaffolds. This review introduces the complicated scenario of collagen structure, fibril arrangement, type, function, and in addition, distribution within the body for the enhancement of collagen-based scaffolds. We describe and compare existing approaches for the alignment of collagen with a sharper focus on electro-compaction. Additionally, various effective processes to further enhance electro-compacted collagen, such as crosslinking, the addition of filler materials, and post-alignment fabrication techniques, are discussed. Finally, current challenges and future directions for the electro-compaction of collagen are presented, providing guidance for the further development of collagenous scaffolds for bioengineering and nanotechnology.

Biomaterials for Soft Tissue Repair and Regeneration: A Focus on Italian Research in the Field

Tissue repair and regeneration is an interdisciplinary field focusing on developing bioactive substitutes aimed at restoring pristine functions of damaged, diseased tissues. Biomaterials, intended as those materials compatible with living tissues after in vivo administration, play a pivotal role in this area and they have been successfully studied and developed for several years. Namely, the researches focus on improving bio-inert biomaterials that well integrate in living tissues with no or minimal tissue response, or bioactive materials that influence biological response, stimulating new tissue re-growth. This review aims to gather and introduce, in the context of Italian scientific community, cutting-edge advancements in biomaterial science applied to tissue repair and regeneration. After introducing tissue repair and regeneration, the review focuses on biodegradable and biocompatible biomaterials such as collagen, polysaccharides, silk proteins, polyesters and their derivatives, characterized by the most promising outputs in biomedical science. Attention is pointed out also to those biomaterials exerting peculiar activities, e.g., antibacterial. The regulatory frame applied to pre-clinical and early clinical studies is also outlined by distinguishing between Advanced Therapy Medicinal Products and Medical Devices.

The effectiveness of hydroxyapatite-beta tricalcium phosphate incorporated into stem cells from human exfoliated deciduous teeth for reconstruction of rat calvarial bone defects

OBJECTIVE

To investigate the effects of stem cells from the pulp of human exfoliated deciduous teeth (SHED) on biphasic calcium phosphate granules (BCP) to repair rat calvarial defects as compared to autogenous bone grafting.

MATERIALS AND METHODS

A defect with a 6-mm diameter was produced on the calvaria of 50 rats. BCP granules were incorporated into SHED cultures grown for 7 days in conventional (CM) or osteogenic (OM) culture media. The animals were allocated into 5 groups of 10, namely: clot, autogenous bone, BCP, BCP+SHED in CM (BCP-CM), and BCP+SHED in OM (BCP-OM). The presence of newly formed bone and residual biomaterial particles was assessed by histometric analysis after 4 and 8 weeks.

RESULTS

The autogenous group showed the largest newly formed bone area at week 8 and in the entire experimental period, with a significant difference in relation to the other groups (P < 0.05). At week 8, BCP-CM and BCP-OM groups showed homogeneous new bone formation (P = 0.13). When considering the entire experimental period, the BCP group had the highest percentage of residual particle area, with no significant difference from the BCP-CM group (P = 0.06) and with a significant difference from the BCP-OM group (P = 0.01). BCP-CM and BCP-OM groups were homogeneous throughout the experimental period (P = 0.59).

CONCLUSIONS

BCP incorporated into SHED cultures showed promising outcomes, albeit less pronounced than autogenous grafting, for the repair of rat calvarial defects.

CLINICAL RELEVANCE

BCP incorporated into SHED cultures showed to be an alternative in view of the disadvantages to obtain autogenous bone graft.

Collagen-Based Electrospun Materials for Tissue Engineering: A Systematic Review

Collagen is a key component of the extracellular matrix (ECM) in organs and tissues throughout the body and is used for many tissue engineering applications. Electrospinning of collagen can produce scaffolds in a wide variety of shapes, fiber diameters and porosities to match that of the native ECM. This systematic review aims to pool data from available manuscripts on electrospun collagen and tissue engineering to provide insight into the connection between source material, solvent, crosslinking method and functional outcomes. D-banding was most often observed in electrospun collagen formed using collagen type I isolated from calfskin, often isolated within the laboratory, with short solution solubilization times. All physical and chemical methods of crosslinking utilized imparted resistance to degradation and increased strength. Cytotoxicity was observed at high concentrations of crosslinking agents and when abbreviated rinsing protocols were utilized. Collagen and collagen-based scaffolds were capable of forming engineered tissues in vitro and in vivo with high similarity to the native structures.

Effect of protease inhibitor specificity on dentin matrix properties

OBJECTIVE

To evaluate protease activity of dentin matrices subjected to treatment with non-specific (chlorhexidine - CHX), cysteine cathepsin specific (E-64), and cysteine cathepsin-K (CT-K) specific (Odanacatib - ODN) inhibitors.

METHODS

Pulverized dentin powder obtained from human dentin disks (0.5 mm thickness) completely demineralized with 10% H₃PO₄ were challenged in 1 mL lactic acid (LA) (0.1M, pH 5.5) or stored in deionized water for 30 min. Aliquots of dentin powder were then immersed in 1 mL of CHX (2%), E-64 (10 μM and 20 μM) or Odanacatib (0.2 nM and 1 μM) for 30min. Degradation of dentin collagen was determined by telopeptide assays measuring the sub-product release of C-terminal cross-linked telopeptides (ICTP) and C-terminal peptide (CTX) in incubation media, which correlates with matrix metalloproteinases (MMP) and CT-K activities respectively (n = 3). The ICTP and CTX data were normalized to concentration of total protein (ICTP_tp and CTX_tp) in the media, measured by bicinchoninic acid assay. Dentin matrix properties were also measured by gravimetric change (n = 8) and ultimate tensile strength (UTS) (n = 10). Data were analyzed by one-way ANOVA followed by Tukey's post-hoc test and independent t-test (α = 5%).

RESULTS

Telopeptide assays showed significantly lower CTX_tp values after treatment with E-64 and Odanacatib. E-64 and Odanacatib at all tested concentrations significantly reduced the release of ICTP_tp. Gravimetric analysis showed no significant difference between the tested inhibitors and control except for CHX after lactic acid challenge. UTS results showed significantly higher values for E-64 (20 μM) and Odanacatib (0.2 nM and 1 μM) groups in deionized water.

SIGNIFICANCE

Dentin therapies targeting enzymes such as CT-K by specific inhibitors may provide superior pharmacokinetics and optimum efficacy due to precise protein binding, consequently limiting collagen degradation directly or indirectly by enzyme related pathways.

Development of Bionanocomposites Based on PLA, Collagen and AgNPs and Characterization of Their Stability and In Vitro Biocompatibility

Bionanocomposites including poly(lactic acid) (PLA), collagen, and silver nanoparticles (AgNPs) were prepared as biocompatible and stable films. Thermal properties of the PLA-based bionanocomposites indicated an increase in the crystallinity of PLA plasticized due to a small quantity of AgNPs. The results on the stability study indicate the promising contribution of the AgNPs on the durability of PLA-based bionanocomposites. In vitro biocompatibility conducted on the mouse fibroblast cell line NCTC, clone 929, using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed high values of cell viability (>80%) after cell cultivation in the presence of bionanocomposite formulations for 48 h, while the percentages of lactate dehydrogenase (LDH) released in the culture medium were reduced (<15%), indicating no damages of the cell membranes. In addition, cell cycle analysis assessed by flow cytometry indicated that all tested bionanocomposites did not affect cell proliferation and maintained the normal growth rate of cells. The obtained results recommend the potential use of PLA-based bionanocomposites for biomedical coatings.

Importance of crosslinking strategies in designing smart biomaterials for bone tissue engineering: A systematic review

Biomaterials are of significant importance in biomedical applications as these biological macromolecules have moderately replaced classical tissue grafting techniques owing to its beneficial properties. Despite of its favourable advantages, poor mechanical and degradative properties of biomaterials are of great concern. To this regard, crosslinkers have emerged as a smart and promising tool to augment the biological functionality of biopolymers. Different crosslinkers have been extensively used in past decades to develop bone substitutes, but the implications of toxic response and adverse reactions are truly precarious after implantation. Traditional crosslinker like glutaraldehyde has been widely used in numerous bio-implants but the potential toxicity is largely being debated with many disproving views. As alternative, green chemicals, enzymatic and non-enzymatic chemicals, bi-functional epoxies, zero-length crosslinkers and physical crosslinkers have been introduced to achieve the desired properties of a bone substitute. In this review, systematic literature search was performed on PubMed database to identify the most commonly used crosslinkers for developing promising bone like materials. The relevant articles were identified, analysed and reviewed in this paper giving due importance to different crosslinking methodologies and comparing their effectiveness and efficacy in regard to material composition, scaffold production, crosslinker dosage, toxicity and immunogenicity. This review summarizes the recent developments in crosslinking mechanism with an emphasis placed on their ability to link proteins through bonding reactions. Finally, this study also covers the convergent and divergent methodologies of crosslinking strategies also giving special importance in retrieving the current limitations and future opportunities of crosslinking modalities in bone tissue engineering.

Novel Biomedical Applications of Crosslinked Collagen

Collagen is one of the most useful biopolymers because of its low immunogenicity and biocompatibility. The biomedical potential of natural collagen is limited by its poor mechanical strength, thermal stability, and enzyme resistance, but exogenous chemical, physical, or biological crosslinks have been used to modify the molecular structure of collagen to minimize degradation and enhance mechanical stability. Although crosslinked collagen-based materials have been widely used in biomedicine, there is no standard crosslinking protocol that can achieve a perfect balance between stability and functional remodeling of collagen. Understanding the role of crosslinking agents in the modification of collagen performance and their potential biomedical applications are crucial for developing novel collagen-based biopolymers for therapeutic gain.

Potential of Electrospun Poly(3-hydroxybutyrate)/Collagen Blends for Tissue Engineering Applications

In this work, tunable nonwoven mats based on poly(3-hydroxybutyrate) (PHB) and type I collagen (Coll) were successfully produced by electrospinning. The PHB/Coll weight ratio (fixed at 100/0, 70/30, and 50/50, resp.) was found to control the morphological, thermal, mechanical, and degradation properties of the mats. Increasing collagen amounts led to larger diameters of the fibers (in the approximate range 600-900 nm), while delaying their thermal decomposition (from 245°C to 262°C). Collagen also accelerated the hydrolytic degradation of the mats upon incubation in aqueous medium at 37°C for 23 days (with final weight losses of 1%, 15%, and 23% for 100/0, 70/30, and 50/50 samples, resp.), as a result of increased mat wettability and reduced PHB crystallinity. Interestingly, 70/30 meshes were the ones displaying the lowest stiffness (~116 MPa; p < 0.05 versus 100/0 and 50/50 meshes), while 50/50 samples had an elastic modulus comparable to that of 100/0 ones (~250 MPa), likely due to enhanced physical crosslinking of the collagen chains, at least at high protein amounts. All substrates were also found to allow for good viability and proliferation of murine fibroblasts, up to 6 days of culture. Collectively, the results evidenced the potential of as-spun PHB/Coll meshes for tissue engineering applications.

A hydroxamic acid–methacrylated collagen conjugate for the modulation of inflammation-related MMP upregulation

The selective covalent coupling of hydroxamic acid functions on to methacrylated type I collagen led to UV-cured networks with inherent MMP-modulating capability and enhanced proteolytic stability.

Construction and biocompatibility of a thin type I/II collagen composite scaffold

Articular cartilage injury is a common type of damage observed in clinical practice. A matrix-induced autologous chondrocyte implant was developed to repair articular cartilage as an advancement on the autologous chondrocyte implant procedure. Here, we establish a thin double layer of collagen as a novel and effective bioscaffold for the regeneration of cartilaginous lesions. We created a collagen membrane with double layers using a cover slip, a cover slip, and the collagen was then freeze-dried under vacuum. Carbodiimide as a crosslinking agent was used to obtain a relatively stable collagen construction. The thickness of the knee joint cartilage from grown rabbits was measured from a frozen section. Both type I and type II collagens were characterized using Sodium dodecylsulfate/polyacrylamide gel electrophoresis (SDS-PAGE) and ultraviolet absorption peaks. The aperture size of the scaffold was observed using a scanning electron microscope (SEM). The degradation of the scaffolds in vitro was tested through digestion using collagenase solution. The mechanical capacity of the scaffolds was assessed under dynamic compression. The influence of the scaffold on chondrocyte proliferation was assessed using the methyl thiazolyl tetrazolium (MTT) colourimetric assay and scanning electron microscopy. The frozen sections of the rabbit femoral condyle showed that the thickness of the weight-bearing area of the articular cartilage was less than 1 mm. The results of the SDS-PAGE and ultraviolet absorption peaks of the collagens were in agreement with the standard photographs in the references. SEM showed that the aperture size of the cross-linked scaffold was 82.14 ± 15.70 μm. The in vitro degradation studies indicated that Carbodiimide cross-linking can effectively enhance the biostability of the scaffolds. The Carbodiimide cross-linking protocol resulted in a mean value for the samples that ranged from 8.72 to 15.95 MPa for the compressive strength. The results of the MTT demonstrated that the scaffold had promoted chondrocyte proliferation and SEM observations showed that the scaffold was a good adhesive and growth material for chondrocytes. Thin type I/II collagen composite scaffold can meet the demands of cartilage tissue engineering and have good biocompatibility.

Stabilisation of Collagen Sponges by Glutaraldehyde Vapour Crosslinking

Glutaraldehyde is a well-recognised reagent for crosslinking and stabilising collagens and other protein-based materials, including gelatine. In some cases, however, the use of solutions can disrupt the structure of the material, for example, by causing rapid dispersion or distortions from surface interactions. An alternative approach that has been explored in a number of individual cases is the use of glutaraldehyde vapour. In this study, the effectiveness of a range of different glutaraldehyde concentrations in the reservoir providing vapour, from 5% to 25% (w/v), has been explored at incubation times from 5 h to 48 h at room temperature. These data show the effectiveness of the glutaraldehyde vapour approach for crosslinking collagen and show that materials with defined, intermediate stability could be obtained, for example, to control resorption rates in vivo.

Emerging Perspectives in Scaffold for Tissue Engineering in Oral Surgery

Bone regeneration is currently one of the most important and challenging tissue engineering approaches in regenerative medicine. Bone regeneration is a promising approach in dentistry and is considered an ideal clinical strategy in treating diseases, injuries, and defects of the maxillofacial region. Advances in tissue engineering have resulted in the development of innovative scaffold designs, complemented by the progress made in cell-based therapies. In vitro bone regeneration can be achieved by the combination of stem cells, scaffolds, and bioactive factors. The biomimetic approach to create an ideal bone substitute provides strategies for developing combined scaffolds composed of adult stem cells with mesenchymal phenotype and different organic biomaterials (such as collagen and hyaluronic acid derivatives) or inorganic biomaterials such as manufactured polymers (polyglycolic acid (PGA), polylactic acid (PLA), and polycaprolactone). This review focuses on different biomaterials currently used in dentistry as scaffolds for bone regeneration in treating bone defects or in surgical techniques, such as sinus lift, horizontal and vertical bone grafts, or socket preservation. Our review would be of particular interest to medical and surgical researchers at the interface of cell biology, materials science, and tissue engineering, as well as industry-related manufacturers and researchers in healthcare, prosthetics, and 3D printing, too.

Protease-sensitive atelocollagen hydrogels promote healing in a diabetic wound model

The design of exudate-managing wound dressings is an established route to accelerated healing, although such design remains a challenge from material and manufacturing standpoints. Aiming towards the clinical translation of knowledge gained in vitro with highly-swollen rat tail collagen hydrogels, this study investigated the healing capability in a diabetic mouse wound model of telopeptide-free, protease-inhibiting collagen networks. 4-Vinylbenzylation and UV irradiation of type I atelocollagen (AC) led to hydrogel networks with chemical and macroscopic properties comparable to previous collagen analogues, attributable to similar lysine content and dichroic properties. After 4 days in vitro, hydrogels induced nearly 50 RFU% reduction in matrix metalloproteinase (MMP)-9 activity, whilst showing less than 20 wt% mass loss. After 20 days in vivo, dry networks promoted 99% closure of 10 × 10 mm full thickness wounds and accelerated neo-dermal tissue formation compared to Mepilex®. This collagen system can be equipped with multiple, customisable properties and functions key to personalised chronic wound care.

Polylactic Acid Based Nanocomposites: Promising Safe and Biodegradable Materials in Biomedical Field

Polylactic acid (PLA) is widely used in biological areas due to its excellent compatibility, bioabsorbability, and degradation behavior in human bodies. Pure polylactic acid has difficulty in meeting all the requirements that specific field may demand. Therefore, PLA based nanocomposites are extensively investigated over the past few decades. PLA based nanocomposites include PLA based copolymers in nanometer size and nanocomposites with PLA or PLA copolymers as matrix and nanofillers as annexing agent. The small scale effect and surface effect of nanomaterials help improve the properties of PLA and make PLA based nanocomposites more popular compared with pure PLA materials. This review mainly introduces different kinds of PLA based nanocomposites in recent researches that have great potential to be used in biomedical fields including bone substitute and repair, tissue engineering, and drug delivery system.

A structurally self-assembled peptide nano-architecture by one-step electrospinning

Peptide self-assembly during electrospinning while the solvent is evaporating and the fibres are forming.