Experimental and Theoretical Studies on the Adsorption Mechanisms of Uranium (VI) Ions on Chitosan

Synergetic and advanced isotherm investigation for the enhancement influence of zeolitization and β-cyclodextrin hybridization on the retention efficiency of U(vi) ions by diatomite

In synergetic investigations, the adsorption effectiveness of diatomite-based zeolitic structure (ZD) as well as its β-cyclodextrin (CD) hybrids (CD/ZD) towards uranium ions (U(vi)) was evaluated to examine the influence of the transformation procedures. The retention behaviors and mechanistic processes have been demonstrated through analyzing the steric and energetic factors employing the modern equilibrium approach (a monolayer model with a single energy level). After the saturation phase, the uptake characteristics of U(vi) were dramatically improved to 297.5 mg g-1 after the CD blending procedure versus ZD (262.3 mg g-1) or 127.8 mg g-1. The steric analysis indicated a notable increase in binding site levels after the zeolitization steps (Nm = 85.7 mg g-1) as well as CD implementation (Nm = 91.2 mg g-1). This finding clarifies the reported improvement in the ability of CD/ZD to effectively retain the U(vi) ions. Furthermore, every single active site of the CD/ZD material has the capacity to adsorb around four ions, which are aligned according to a vertical pattern. The energetic aspects, specifically Gaussian energy (<8 kJ mol-1) along with retention energy (<40 kJ mol-1), validate the regulated influences of the physical mechanistic processes. The physical adsorption of U(vi) seems to depend on various intermolecular forces, such as van der Waals forces, in conjunction with zeolitic ion exchanging pathways (0.6-25 kJ mol-1). The thermodynamic assets have been evaluated to confirm the exothermic together with spontaneous adsorption U(vi) by ZD and its blend with CD (CD/ZD).

Integration of 3D Printing-Coelectrospinning: Concept Shifting in Biomedical Applications

Porous structures with sizes between the submicrometer and nanometer scales can be produced using efficient and adaptable electrospinning technology. However, to approximate desirable structures, the construction lacks mechanical sophistication and conformance and requires three-dimensional solitary or multifunctional structures. The diversity of high-performance polymers and blends has enabled the creation of several porous structural conformations for applications in advanced materials science, particularly in biomedicine. Two promising technologies can be combined, such as electrospinning with 3D printing or additive manufacturing, thereby providing a straightforward yet flexible technique for digitally controlled shape-morphing fabrication. The hierarchical integration of configurations is used to imprint complex shapes and patterns onto mesostructured, stimulus-responsive electrospun fabrics. This technique controls the internal stresses caused by the swelling/contraction mismatch in the in-plane and interlayer regions, which, in turn, controls the morphological characteristics of the electrospun membranes. Major innovations in 3D printing, along with additive manufacturing, have led to the production of materials and scaffold systems for tactile and wearable sensors, filtration structures, sensors for structural health monitoring, tissue engineering, biomedical scaffolds, and optical patterning. This review discusses the synergy between 3D printing and electrospinning as a constituent of specific microfabrication methods for quick structural prototypes that are expected to advance into next-generation constructs. Furthermore, individual techniques, their process parameters, and how the fabricated novel structures are applied holistically in the biomedical field have never been discussed in the literature. In summary, this review offers novel insights into the use of electrospinning and 3D printing as well as their integration for cutting-edge applications in the biomedical field.

Bio-functionalized magnetic nanoparticles for cost-effective adsorption of U(vi): experimental and theoretical investigation

U(vi) removal using cost-effective (production cost: $14.03 per kg), biocompatible, and superparamagnetic Cinnamomum tamala (CT) leaf extract-coated magnetite nanoparticles (CT@MNPs or CT@Fe₃O₄ nanoparticles) from water resources was studied. From pH-dependent experiments, the maximum adsorption efficiency was found to be at pH 8. Isotherm and kinetic studies were performed and found to follow Langmuir isotherm and pseudo-second order kinetics, respectively. The maximum adsorption capacity of CT@MNPs was calculated to be 45.5 mg of U(vi) per g of nanoparticles (NPs). Recyclability studies suggest that over 94% sorption was retained even after four consecutive cycles. The sorption mechanism was explained by the point of the zero-charge experiment and the XPS measurement. Additionally, calculations using density functional theory (DFT) were carried out to support the experimental findings.

Hectorite-CTAB-alginate composite beads for water treatment: kinetic, isothermal and thermodynamic studies

Encapsulation of hectorite-modified CTAB with Ca-alginate formed reusable adsorbent beads for wastewater treatment. The thermogravimetric analysis (TGA) investigation indicated excellent thermal stability results for BHec-40 compared to Hec-40. Although the mesoporous surface area of BHec-40 decreased to 79.74 m2 g-1 compared to 224.21 m2 g-1 for Hec-40, the hectorite-CTAB-alginate beads showed high adsorption capacity and stability for methyl orange (MO) adsorption with more than 60% removal after five adsorption-desorption cycles. The influence of pH (3-11), temperature (30, 40, and 50 °C), initial concentration (50-400 mg L-1), and contact time were studied to obtain the kinetics and thermodynamics of adsorption. The outcomes revealed a maximum monolayer adsorption capacity of 117.71 mg g-1 for BHec-40. The kinetics of adsorption demonstrated the suitability of using the pseudo-first-order kinetic model, while the equilibrium adsorption data follows the Langmuir isotherm. Thermodynamic analysis indicates physisorption of MO onto BHec-40. BHec-40 improves the reusability as an adsorbent for the removal of anionic dyes from aqueous media.

Characteristic Aspects of Uranium(VI) Adsorption Utilizing Nano-Silica/Chitosan from Wastewater Solution

A new nano-silica/chitosan (SiO₂/CS) sorbent was created using a wet process to eliminate uranium(VI) from its solution. Measurements using BET, XRD, EDX, SEM, and FTIR were utilized to analyze the production of SiO₂/CS. The adsorption progressions were carried out by pH, SiO₂/CS dose, temperature, sorbing time, and U(VI) concentration measurements. The optimal condition for U(VI) sorption (165 mg/g) was found to be pH 3.5, 60 mg SiO₂/CS, for 50 min of sorbing time, and 200 mg/L U(VI). Both the second-order sorption kinetics and Langmuir adsorption model were observed to be obeyed by the ability of SiO₂/CS to eradicate U(VI). Thermodynamically, the sorption strategy was a spontaneous reaction and exothermic. According to the findings, SiO₂/CS had the potential to serve as an effectual sorbent for U(VI) displacement.

Predicting the Adsorption of Amoxicillin and Ibuprofen on Chitosan and Graphene Oxide Materials: A Density Functional Theory Study

The occurrence, persistence, and accumulation of antibiotics and non-steroidal anti-inflammatory drugs (NSAIDs) represent a new environmental problem due to their harmful effects on human and aquatic life. A suitable absorbent for a particular type of pollutant does not necessarily absorb other types of compounds, so knowing the compatibility between a particular pollutant and a potential absorbent before experimentation seems to be fundamental. In this work, the molecular interactions between some pharmaceuticals (amoxicillin, ibuprofen, and tetracycline derivatives) with two potential absorbers, chitosan and graphene oxide models (pyrene, GO-1, and coronene, GO-2), were studied using the ωB97X-D/6-311G(2d,p) level of theory. The energetic interaction order found was amoxicillin/chitosan > amoxicillin/GO-1 > amoxicillin/GO-2 > ibuprofen/chitosan > ibuprofen/GO-2 > ibuprofen/GO-1, the negative sign for the interaction energy in all complex formations confirms good compatibility, while the size of Eint between 24-34 kcal/mol indicates physisorption processes. Moreover, the free energies of complex formation were negative, confirming the spontaneity of the processes. The larger interaction of amoxicillin Gos, compared to ibuprofen Gos, is consistent with previously reported experimental results, demonstrating the exceptional predictability of these methods. The second-order perturbation theory analysis shows that the amoxicillin complexes are mainly driven by hydrogen bonds, while van der Waals interactions with chitosan and hydrophobic interactions with graphene oxides are modelled for the ibuprofen complexes. Energy decomposition analysis (EDA) shows that electrostatic energy is a major contributor to the stabilization energy in all cases. The results obtained in this work promote the use of graphene oxides and chitosan as potential adsorbents for the removal of these emerging pollutants from water.

Insight into chitosan/mesoporous silica nanocomposites as eco-friendly adsorbent for enhanced retention of U (VI) and Sr (II) from aqueous solutions and real water

The chitosan chains were integrated with MCM-48 mesoporous silica in an eco-friendly composite (CH/MCM-48) of enhanced adsorption capacity. The prepared CH/MCM-48 composite was applied in systematic retention of U (VI) as well as Sr (II) ions from water as the commonly detected radioactive pollutants. It displayed promising retention capacities of 261.3 mg/g and 328.6 mg/g for U (VI) and Sr (II) considering the equilibrium time interval that was identified after 420 min. The composite showed the kinetic behavior of the Pseudo-First order model and the isotherm properties of the Langmuir assumption. The thermodynamic assessment of the reactions validated the retention of both U (VI) and Sr (II) ions by spontaneous, favorable, and exothermic reactions. Based on the theoretical values of entropy (-5.94 kJ mol^-1 (U (VI)) and -2.93 kJ mol^-1 (Sr (II))), Gibbs free energy (less than 20 kJ mol^-1), and Gaussian energy (5.77 kJ mol^-1 (U (VI)) and 4.56 kJ mol^-1 (Sr (II))) the uptake processes are related to physical adsorption reactions. The CH/MCM-48 composite is of significant recyclability and showed considerable affinities for the studied radioactive ions even in the presence of other metal ions (Cd (II), Pb (II), Zn (II), and Co (II)).

Effective decontamination of As(V), Hg(II), and U(VI) toxic ions from water using novel muscovite/zeolite aluminosilicate composite: adsorption behavior and mechanism

Muscovite/phillipsitic zeolite was introduced as a novel inorganic composite of stunning adsorption properties. The composite was investigated in the uptake reactions of Hg(II), As(V), and U(VI) as highly toxic water contaminants considering different adsorption factors. The adsorption properties of muscovite/phillipsitic zeolite are highly dependent on the pH values and the best decontamination percentages can be obtained at pH 4, pH 5, and pH 5 for Hg(II), As(V), and U(VI), respectively. The kinetic studies demonstrated adsorption equilibrium for Hg(II), As(V), and U(VI) after 360 min, 300 min, and 360 min, respectively. The equilibrium modeling suggested monolayer uptake for all the metals and represented mainly by the Langmuir model considering both the values of determination coefficient and chi-squared (χ²). The estimated maximum capacities are 117 mg/g (Hg(II)), 122.5 mg/g (As(V)), and 138.5 mg/g (U(VI)) which are higher values than several studied adsorbents. The Dubinin-Radushkevich adsorption energies of Hg(II) (19.4 kJ/mol), As(V) (25.6 kJ/mol), and U(VI) (26.47 kJ/mol) signify chemical adsorption mechanisms and close to the obtained values for the ion-exchange process. Additionally, the composite is of high reusability properties and was applied effectively for five decontamination cycles. Graphical abstract.

Removal and recovery of U(VI) from aqueous effluents by flax fiber: Adsorption, desorption and batch adsorber proposal

•

Removal and recovery of uranium were investigated in a batch process.

•

Adsorbent characteristics were scientifically analyzed.

•

The maximum obtained U(VI) removal was ≈94.50% at pH of 4 and adsorbent dose of 1.2 g.

•

Adsorption data were analyzed using kinetic, isotherm and thermodynamic models.

•

Full scale batch adsorber unit was recommended.

Flax fiber (Linen fiber), a valuable and inexpensive material was used as sorbent material in the uptake of uranium ion for the safe disposal of liquid effluent. Flax fibers were characterized using BET, XRD, TGA, DTA and FTIR analyses, and the results confirmed the ability of flax fiber to adsorb uranium. The removal efficiency reached 94.50% at pH 4, 1.2 g adsorbent dose and 100 min in batch technique. Adsorption results were fitted well to the Langmuir isotherm. The recovery of U (VI) to form yellow cake was investigated by precipitation using NH₄OH (33%). The results show that flax fibers are an acceptable sorbent for the removal and recovery of U (VI) from liquid effluents of low and high initial concentrations. The design of a full scale batch unit was also proposed and the necessary data was suggested.