Electrodeposited Porous Mn1.5Co1.5O₄/Ni Composite Electrodes for High-Voltage Asymmetric Supercapacitors

In Situ Binder-Free and Hydrothermal Growth of Nanostructured NiCo2S4/Ni Electrodes for Solid-State Hybrid Supercapacitors

Herein, we report a comparison of the electrochemical performance of two kinds of NiCo2S4-based electrodes for solid-state hybrid supercapacitors (HSCs). For the binder-free electrode, NiCo2S4 was grown on Ni foam by the chemical bath deposition (CBD) method. For the binder-using electrode, NiCo2S4 powder was synthesized by the hydrothermal method. FESEM images depicted the hierarchical nanostructure of NiCo2S4 synthesized by the hydrothermal method and uniform distribution of nanostructured NiCo2S4 grown on Ni foam by the CBD method. Half-cell studies of both NiCo2S4 electrodes showed them exhibiting battery-type charge storage behavior. To assemble HSCs, NiCo2S4 and activated carbon were used as a positive and negative electrode, respectively. Electrochemical studies of the HSCs showed that the accessible potential window was wide, up to 2.6 V, through cyclic voltammetry (CV) analysis. Chronopotentiometry (CP) studies revealed that the energy and power densities of binder-using HSC were 51.24 Wh/kg and 13 kW/kg at 1 Ag−1, respectively, which were relatively higher than those of the binder-free HSC. The binder-free HSC showed 52% cyclic stability, relatively higher than that of the binder-using HSC. Both HSCs, with unique benefits and burdens on energy storage performance, are discussed in this work.

Coconut Shell-Derived Activated Carbon for High-Performance Solid-State Supercapacitors

Coconut shells, low-cost and renewable agro-wastes, were used as a starting material in the synthesis of hierarchical activated carbons via hydrothermal, KOH-activation, and carbonization techniques. The ratio of KOH to hydrochar was varied in a systemic manner to study how it influences the texture and electrochemical behavior of the capacitor. Coconut shell-based carbon coated on nickel foams presented a surface area of 1567 m2 g−1, with micropores as well as mesopores widely distributed. The sample showed superior electrochemical performance, attaining 449 F g−1 at 1 A g−1 in 6 M LiNO3 aqueous solution. The solid-state symmetric supercapacitor device delivered a specific capacitance of 88 F g−1 at 1 A g−1 and a high energy density of 48.9 Whkg−1 at a power density of 1 kW kg−1. At a wide voltage window of 2.0 V, the sample was highly stable during the cycle test, showing a 92% capacitance retention at 2 A g−1 after cycling for 5000 times. The superior performance is due to the sample possessing great BET surface area, a good distribution of pores, and the usage of a suitable electrolyte. This facilitates an electrical double layer that can be deployed for applications to store energy.

Biomass-Derived Porous Carbons Derived from Soybean Residues for High Performance Solid State Supercapacitors

A series of heteroatom-containing porous carbons with high surface area and hierarchical porosity were successfully prepared by hydrothermal, chemical activation, and carbonization processes from soybean residues. The initial concentration of soybean residues has a significant impact on the textural and surface functional properties of the obtained biomass-derived porous carbons (BDPCs). SRAC5 sample with a BET surface area of 1945 m2 g-1 and a wide micro/mesopore size distribution, nitrogen content of 3.8 at %, and oxygen content of 15.8 at % presents the best electrochemical performance, reaching 489 F g-1 at 1 A g-1 in 6 M LiNO3 aqueous solution. A solid-state symmetric supercapacitor (SSC) device delivers a specific capacitance of 123 F g-1 at 1 A g-1 and a high energy density of 68.2 Wh kg-1 at a power density of 1 kW kg-1 with a wide voltage window of 2.0 V and maintains good cycling stability of 89.9% capacitance retention at 2A g-1 (over 5000 cycles). The outstanding electrochemical performances are ascribed to the synergistic effects of the high specific surface area, appropriate pore distribution, favorable heteroatom functional groups, and suitable electrolyte, which facilitates electrical double-layer and pseudocapacitive mechanisms for power and energy storage, respectively.

The Influence of the Electrodeposition Parameters on the Properties of Mn-Co-Based Nanofilms as Anode Materials for Alkaline Electrolysers

In this work, the influence of the synthesis conditions on the structure, morphology, and electrocatalytic performance for the oxygen evolution reaction (OER) of Mn-Co-based films is studied. For this purpose, Mn-Co nanofilm is electrochemically synthesised in a one-step process on nickel foam in the presence of metal nitrates without any additives. The possible mechanism of the synthesis is proposed. The morphology and structure of the catalysts are studied by various techniques including scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. The analyses show that the as-deposited catalysts consist mainly of oxides/hydroxides and/or (oxy)hydroxides based on Mn²⁺, Co²⁺, and Co³⁺. The alkaline post-treatment of the film results in the formation of Mn-Co (oxy)hydroxides and crystalline Co(OH)₂ with a β-phase hexagonal platelet-like shape structure, indicating a layered double hydroxide structure, desirable for the OER. Electrochemical studies show that the catalytic performance of Mn-Co was dependent on the concentration of Mn versus Co in the synthesis solution and on the deposition charge. The optimised Mn-Co/Ni foam is characterised by a specific surface area of 10.5 m²·g⁻¹, a pore volume of 0.0042 cm³·g⁻¹, and high electrochemical stability with an overpotential deviation around 330–340 mV at 10 mA·cm⁻²_geo for 70 h.

Special Issue: Materials for Electrochemical Capacitors and Batteries

Electrochemical capacitors and rechargeable batteries have received worldwide attention due to their excellent energy storage capability for a variety of applications. The rapid development of these technologies is propelled by the advanced electrode materials and new energy storage systems. It is believed that research efforts can improve the device performance to meet the ever-increasing requirements of high energy density, high power density and long cycle life. This Special Issue aims to provide readers with a glimpse of different kinds of electrode materials for electrochemical capacitors and batteries.