Facile Synthesis of Gold Nanoparticles with Alginate and Its Catalytic Activity for Reduction of 4-Nitrophenol and H₂O₂ Detection

α-Fe2O3 and polypyrrole impregnated alginate/gelatin nanocatalysts for the reduction of azo dyes and persistent organic pollutants

Herein, we propose magnetic nanocomposites as a powerful new catalyst for organic pollutant reduction. Polypyrrole (PPy) was synthesized in situ within the semi-interpenetrating alginate (Alg)/gelatin (Ge) network in presence of α-Fe2O3 as encapsulating matrix and inorganic filler, respectively. The polymeric matrix can act as bifunctional agent such as a binder and stabilizer to improve nanocatalyst stability while preserving their catalytic/magnetic performances. The results showed that Alg/Ge/PPy/Fe2O3 catalyst was more effective than its Alg/Ge/PPy and Alg/Ge/PPy/Fe2O3 homologues, suggesting a synergistic effect between PPy and α-Fe2O3 for efficient pollutant removal. Nevertheless, despite the fact that the nanocatalysts showed good catalytic activity for all selected organic pollutants, a selectivity was observed in the following order: methyl orange (MO) > direct red 16 > congo red>amoxicillin>ciprofloxacin>acetamiprid with a rate constant k of 0.54 min-1 achieved for MO reduction over Alg/Ge/PPy/Fe2O3. The proposed mechanism for MO reduction based on HPLC-Q-TOF analysis supports the rupture of azo bond through hydrogenation. Moreover, magnetic nanocatalysts were easily recovered and reused without apparent loss of catalytic activity up to six successive cycles (89 %), and under different mineral salt samples. Lastly, the advantage of the optimized catalyst lies in its reduced manufacturing cost compared with those based on gold, platinum or silver.

Tau- and α-synuclein-targeted gold nanoparticles: applications, opportunities, and future outlooks in the diagnosis and therapy of neurodegenerative diseases

The use of nanomaterials in medicine offers multiple opportunities to address neurodegenerative disorders such as Alzheimer's and Parkinson's disease. These diseases are a significant burden for society and the health system, affecting millions of people worldwide without sensitive and selective diagnostic methodologies or effective treatments to stop their progression. In this sense, the use of gold nanoparticles is a promising tool due to their unique properties at the nanometric level. They can be functionalized with specific molecules to selectively target pathological proteins such as Tau and α-synuclein for Alzheimer's and Parkinson's disease, respectively. Additionally, these proteins are used as diagnostic biomarkers, wherein gold nanoparticles play a key role in enhancing their signal, even at the low concentrations present in biological samples such as blood or cerebrospinal fluid, thus enabling an early and accurate diagnosis. On the other hand, gold nanoparticles act as drug delivery platforms, bringing therapeutic agents directly into the brain, improving treatment efficiency and precision, and reducing side effects in healthy tissues. However, despite the exciting potential of gold nanoparticles, it is crucial to address the challenges and issues associated with their use in the medical field before they can be widely applied in clinical settings. It is critical to ensure the safety and biocompatibility of these nanomaterials in the context of the central nervous system. Therefore, rigorous preclinical and clinical studies are needed to assess the efficacy and feasibility of these strategies in patients. Since there is scarce and sometimes contradictory literature about their use in this context, the main aim of this review is to discuss and analyze the current state-of-the-art of gold nanoparticles in relation to delivery, diagnosis, and therapy for Alzheimer's and Parkinson's disease, as well as recent research about their use in preclinical, clinical, and emerging research areas.

Antibacterial and hemocompatibility potentials of nano-gold-cored alginate preparation against anaerobic bacteria from acne vulgaris

Acne is a prevalent dermatological disease, with high global incidence, and is a health menace. The current study aimed to isolate and characterize the anaerobic bacteria responsible for the condition. Causes of a total of 70 acne-based bacterium isolates obtained from patients of mild, moderate, and severe acne, 24 were Clostridium innocuum, 21 were Lactobacillus plantarum, 13 were Anaerococcus prevotii, and 12 were Peptoniphilus asaccharolyticus. Nearly 69% of males were suffering, while the rest were females at 31%. The 15-30 years old age group was the most affected. The gold/alginate nanoparticles' nanopreparation (GANPs) produced from chloroauric acid and sodium alginate was an effective treatment against the acne conditions under the experimental conditions. The nanopreparation exhibited significant inhibitory activity against anaerobic bacterial isolates, with a minimum inhibitory concentration of 200 µg/ml for A. prevotii and P. asaccharolyticus, and 400 µg/ml for C. innocuum and L. plantarum. The in vitro efficacy of the GANPs on human blood parameters was also assessed. The concurrent results suggested potential antibacterial activity and hemocompatibility of the product, which has promise to be used as a successful antibacterial agent for acne.

Layer-by-Layer Biopolymer Assembly for the In Situ Fabrication of AuNP Plasmonic Paper-A SERS Substrate for Food Adulteration Detection

Here, we introduce an environmentally friendly approach to fabricate a simple and cost-effective plasmonic paper for detecting food additives using surface-enhanced Raman spectroscopy (SERS). The plasmonic paper is fabricated by in situ growth of gold nanoparticles (AuNPs) on filter paper (FP). To facilitate this green fabrication process, we applied a double-layered coating of biopolymers, chitosan (CS) and alginate (ALG), onto the FP using a layer-by-layer (LbL) assembly through electrostatic interactions. Compared to single-layer biopolymer coatings, double-layered biopolymer-coated paper, ALG/CS/FP, significantly improves the reduction properties. Consequently, effective in situ growth of AuNPs can be achieved as seen in high density of AuNP formation on the substrate. The resulting plasmonic paper provides high SERS performance with an enhancement factor (EF) of 5.7 × 1010 and a low limit of detection (LOD) as low as 1.37 × 10-12 M 4-mercaptobenzoic acid (4-MBA). Furthermore, it exhibits spot-to-spot reproducibility with a relative standard deviation (RSD) of 8.2% for SERS analysis and long-term stability over 50 days. This paper-based SERS substrate is applied for melamine (MEL) detection with a low detection limit of 0.2 ppb, which is sufficient for monitoring MEL contamination in milk based on food regulations. Additionally, we demonstrate a simultaneous detection of β-agonists, including ractopamine (RAC) and salbutamol (SAL), exhibiting the multiplexing capability and versatility of the plasmonic paper in food contaminant analysis. The development of this simple plasmonic paper through the LbL biopolymer assembly not only paves the way for novel SERS substrate fabrication but also broadens the application of SERS technology in food contaminant monitoring.

Electrochemical Crosslinking of Alginate-Towards Doped Carbons for Oxygen Reduction

Electrochemical crosslinking of alginate strands by in situ iron oxidation was explored using a potentiostatic regime. Carbon-based materials co-doped with iron, nitrogen, and/or sulfur were prepared via electrolyte composition variation with a nitrogen-rich compound (rivanol) or through post-treatments with sodium sulfide. Nanometer-sized iron particles were confirmed by transmission and field emission scanning electron microscopy in all samples as a consequence of the homogeneous dispersion of iron in the alginate scaffold and its concomitant growth-limiting effect of alginate chains. Raman spectra confirmed a rise in structural disorder with rivanol/Na2S treatment, which points to more defect sites and edges known to be active sites for oxygen reduction. Fourier transform infrared (FTIR) spectra confirmed the presence of different iron, nitrogen, and sulfur species, with a marked difference between Na2S treated/untreated samples. The most positive onset potential (-0.26 V vs. saturated calomel electrode, SCE) was evidenced for the sample co-doped with N, S, and Fe, surpassing the activity of those with single and/or double doping. The mechanism of oxygen reduction in 0.1 M KOH was dominated by the 2e- reduction pathway at low overpotentials and shifted towards complete 4e- reduction at the most negative explored values. The presented results put forward electrochemically formed alginate gels functionalized by homogeneously dispersed multivalent cations as an excellent starting point in nanomaterial design and engineering.

Role and Merits of Green Based Nanocarriers in Cancer Treatment

Simple Summary

The use of chemotherapy drugs against tumours is associated with various drawbacks such as poor solubility, low stability, high toxicity, lack of selectivity and rapid clearance. Nanocarriers can improve the safety and efficiency of drugs by increasing their solubility, enhance their circulation time and improve their uptake into cancer cells. Natural materials can be incorporated in the fabrication of nanocarriers as a substitute to synthetic ingredients. Several studies developed different types of green based nanocarriers using materials obtained from plant or microbial sources such as polysaccharides and polyphenols without the need of toxic chemicals in the synthesis. The green components can have many roles for example as mechanical support, trigger pH response for drug release, or act as a targeting ligand. The inclusion of these green components will support the cost effective and feasible large-scale production of nanocarriers with minimum negative impact on the environment.

Abstract

The use of nanocarriers for biomedical applications has been gaining interests from researchers worldwide for the delivery of therapeutics in a controlled manner. These “smart” vehicles enhance the dissolution and the bioavailability of drugs and enable their delivery to the target site. Taking the potential toxicity into consideration, the incorporation of natural “green” materials, derived from plants or microbial sources, in the nanocarriers fabrication, improve their safety and biocompatibility. These green components can be used as a mechanical platform or as targeting ligand for the payload or can play a role in the synthesis of nanoparticles. Several studies reported the use of green based nanocarriers for the treatment of diseases such as cancer. This review article provides a critical analysis of the different types of green nanocarriers and their synthesis mechanisms, characterization, and their role in improving drug delivery of anticancer drugs to achieve precision cancer treatment. Current evidence suggests that green-based nanocarriers can constitute an effective treatment against cancer.

One-step green synthesis of 2D Ag-dendrite-embedded biopolymer hydrogel beads as a catalytic reactor

Silver (Ag) nanocrystals with a dendritic structure have attracted intensive attention because of their unique structural properties, which include abundant sharp corners and edges that provide a large number of active atoms. However, the synthesis of Ag dendrites via a simple and environmentally friendly method under ambient conditions remains a challenge. In this paper, we report a simple water-based green method for the production of biopolymer hydrogel beads embedded with Ag dendrites without using an additional reducing agent, stabilizer, or crosslinking agent. The obtained Ag dendrites exhibit a unique two-dimensional (2D) structure rather than a conventional three-dimensional structure because Ag⁺ ions are reduced on the surface of the solid-phase hydrogel beads and grow into crystals. Reasonable mechanisms explaining the formation of the nanocomposite hydrogel beads and the formation of 2D Ag dendrites in the hydrogel are proposed on the basis of our observations and results. The hydrogel beads embedded the 2D Ag dendrites were used as an environmentally friendly catalytic reactor, and their catalytic performance was evaluated by adopting the reduction of 4-nitrophenol to 4-aminophenol with NaBH₄ as a model reaction.

Alginate hydrogel beads embedded with 2D Ag dendrites were synthesized by simply adding aqueous alginate droplets to an aqueous AgNO₃ solution.

Optimization of sol-immobilized bimetallic Au-Pd/TiO2 catalysts: reduction of 4-nitrophenol to 4-aminophenol for wastewater remediation

A sol-immobilization method is used to synthesize a series of highly active and stable Au_xPd_1-x/TiO₂ catalysts (where x = 0, 0.13, 0.25, 0.5, 0.75, 0.87 and 1) for wastewater remediation. The catalytic performance of the materials was evaluated for the catalytic reduction of 4-nitrophenol, a model wastewater contaminant, using NaBH₄ as the reducing agent under mild reaction conditions. Reaction parameters such as substrate/metal and substrate/reducing agent molar ratios, reaction temperature and stirring rate were investigated. Structure-activity correlations were studied using a number of complementary techniques including X-ray powder diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. The sol-immobilization route provides very small Au-Pd alloyed nanoparticles, with the highest catalytic performance shown by the Au_0.5Pd_0.5/TiO₂ catalyst. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

Facile and Green Fabrication of Carrageenan-Silver Nanoparticles for Colorimetric Determination of Cu2+ and S2

In the present work, silver nanoparticles (AgNPs) were prepared by a simple and green method using carrageenan as reducing and capping agent. The as-synthesized carrageenan-AgNPs was demonstrated as an effective duel colorimetric sensing for selective and sensitive recognition of Cu²⁺ and S²⁻, which could be used to detect these ions with naked eyes. In addition, the possible sensing mechanism was that Cu²⁺ ions caused serious aggregation of carrageenan-AgNPs, which led to the color change of carrageenan-AgNPs. AgNPs were etched by S²⁻ forming Ag₂S, which played an important role in the determination of S²⁻ ions. Furthermore, it has been successfully applied to the determination of Cu²⁺ and S²⁻ in tap water and lake water, showing its great potential for the analysis of environmental water samples.

Engineered Gold-Based Nanomaterials: Morphologies and Functionalities in Biomedical Applications. A Mini Review

In the last decade, several engineered gold-based nanomaterials, such as spheres, rods, stars, cubes, hollow particles, and nanocapsules have been widely explored in biomedical fields, in particular in therapy and diagnostics. As well as different shapes and dimensions, these materials may, on their surfaces, have specific functionalizations to improve their capability as sensors or in drug loading and controlled release, and/or particular cell receptors ligands, in order to get a definite targeting. In this review, the up-to-date progress will be illustrated regarding morphologies, sizes and functionalizations, mostly used to obtain an improved performance of nanomaterials in biomedicine. Many suggestions are presented to organize and compare the numerous and heterogeneous experimental data, such as the most important chemical-physical parameters, which guide and control the interaction between the gold surface and biological environment. The purpose of all this is to offer the readers an overview of the most noteworthy progress and challenges in this research field.

Polydopamine functionalized hydrogel beads as magnetically separable antibacterial materials

In the present study, magnetically separable hydrogel beads of ionically cross-linked alginate were functionalized with polydopamine (PDA). The rationale behind this was to enhance the structural stability and antibacterial profile of PDA/Alg/Fe₃O₄ beads (K3). Incorporation of superparamagnetic magnetite (Fe₃O₄) nanoparticles endowed the hydrogel beads with magnetism. X-ray diffraction (XRD) analysis revealed the successful formation of pure Alg/Fe₃O₄ nanoparticles having an inverse spinel structure. Vibrating sample magnetometry (VSM) confirmed their superparamagnetic behaviour with M_s values of 36.18 and 30.46 emu g⁻¹ at 5 and 300 K, respectively. High resolution-transmission electron microscopy (HR-TEM) images showed alginate capping and the size of the Alg/Fe₃O₄ nanoparticles (∼8 nm). The successful deposition of PDA granules on the K3 bead surface was verified by field emission-scanning electron microscopy (FE-SEM). The PDA functionalization was further justified by VSM, XRD and Fourier-transform infrared spectroscopy (FT-IR). During swelling experiments, K3 beads displayed appreciable structural stability compared to bare/non-functionalized beads. Wettability studies revealed K3 beads to be hydrophilic with a contact angle of ∼55°. Rheological parameters including storage modulus (G′) and shear viscosity of K3 increased upon PDA functionalization. During antibacterial tests, K3 strongly inhibited E. coli, S. typhi, S. aureus and L. monocytogenes in a concentration and time dependent manner. Fluorescence staining experiments showed that K3 could greatly alter the bacterial membrane integrity. Reusability experiments with K3 beads substantiated their effective broad-spectrum antibacterial performance for three consecutive cycles.

Surface functionalization with polydopamine augments the structural stability and antibacterial profile of magnetic hydrogel beads.

Construction and Application of a Non-Enzyme Hydrogen Peroxide Electrochemical Sensor Based on Eucalyptus Porous Carbon

Natural eucalyptus biomorphic porous carbon (EPC) materials with unidirectional ordered pores have been successfully prepared by carbonization in an inert atmosphere. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) were employed to characterize the phase identification, microstructure and morphology analysis. The carbon materials were used to fabricate electrochemical sensors to detect hydrogen peroxide (H₂O₂) without any assistance of enzymes because of their satisfying electrocatalytic properties. It was immobilized on a glassy carbon electrode (GCE) with chitosan (CHIT) to fabricate a new kind of electrochemical sensor, EPC/CHIT/GCE, which showed excellent electrocatalytic activity in the reduction of H₂O₂. Meanwhile, EPC could also promote electron transfer with the help of hydroquinone. The simple and low-cost electrochemical sensor exhibited high sensitivity, and good operational and long-term stability.