3D Printed Structures Filled with Carbon Fibers and Functionalized with Mesenchymal Stem Cell Conditioned Media as In Vitro Cell Niches for Promoting Chondrogenesis

Deep eutectic solvent-assisted fabrication of bioinspired 3D carbon-calcium phosphate scaffolds for bone tissue engineering

Tissue engineering is a burgeoning field focused on repairing damaged tissues through the combination of bodily cells with highly porous scaffold biomaterials, which serve as templates for tissue regeneration, thus facilitating the growth of new tissue. Carbon materials, constituting an emerging class of superior materials, are currently experiencing remarkable scientific and technological advancements. Consequently, the development of novel 3D carbon-based composite materials has become significant for biomedicine. There is an urgent need for the development of hybrids that will combine the unique bioactivity of ceramics with the performance of carbonaceous materials. Considering these requirements, herein, we propose a straightforward method of producing a 3D carbon-based scaffold that resembles the structural features of spongin, even on the nanometric level of their hierarchical organization. The modification of spongin with calcium phosphate was achieved in a deep eutectic solvent (choline chloride : urea, 1 : 2). The holistic characterization of the scaffolds confirms their remarkable structural features (i.e., porosity, connectivity), along with the biocompatibility of α-tricalcium phosphate (α-TCP), rendering them a promising candidate for stem cell-based tissue-engineering. Culturing human bone marrow mesenchymal stem cells (hMSC) on the surface of the biomimetic scaffold further verifies its growth-facilitating properties, promoting the differentiation of these cells in the osteogenesis direction. ALP activity was significantly higher in osteogenic medium compared to proliferation, indicating the differentiation of hMSC towards osteoblasts. However, no significant difference between C and C-αTCP in the same medium type was observed.

Mesenchymal-Stromal-Cell-Conditioned Media and Their Implication for Osteochondral Regeneration

Despite significant advances in biomedical research, osteochondral defects resulting from injury, an autoimmune condition, cancer, or other pathological conditions still represent a significant medical problem. Even though there are several conservative and surgical treatment approaches, in many cases, they do not bring the expected results and further permanent damage to the cartilage and bones occurs. Recently, cell-based therapies and tissue engineering have gradually become promising alternatives. They combine the use of different types of cells and biomaterials to induce regeneration processes or replace damaged osteochondral tissue. One of the main challenges of this approach before clinical translation is the large-scale in vitro expansion of cells without changing their biological properties, while the use of conditioned media which contains various bioactive molecules appears to be very important. The presented manuscript provides a review of the experiments focused on osteochondral regeneration by using conditioned media. In particular, the effect on angiogenesis, tissue healing, paracrine signaling, and enhancing the properties of advanced materials are pointed out.

Manufacturing functional hydrogels for inducing angiogenic-osteogenic coupled progressions in hard tissue repairs: prospects and challenges

In large bone defects, inadequate vascularization within the engineered constructs has been a major challenge in developing clinically impactful products. It is fairly determined that bone tissues and blood vessels are established concurrently throughout tissue repairs after an injury. Thus, the coupling of angiogenesis-osteogenesis is an essential course of action in bone tissue restoration. The manufacture of biomaterial-based scaffolds plays a decisive role in stimulating angiogenic and osteogenic progressions (instruction of neovascularization and bone mineralization). Bone hydrogels with optimal conditions are more efficient at healing bone defects. There has been a remarkable advancement in producing bone substitutes in the tissue engineering area, but the sufficient and timely vascularization of engineered constructs for optimal tissue integration and regeneration is lacking due to mismatch in the scaffold characteristics and new bone tissue reconstruction. Therefore, various key challenges remain to be overcome. A deep understanding of angiogenesis and osteogenesis progressions is required to manufacture bone hydrogels with satisfactory results. The current review briefly discusses the fundamentals of bone tissues, the significance of angiogenesis-osteogenesis progressions and their inducers, the efficacy of biomaterials and composite hydrogel-promoted neo-vasculogenesis (i.e. angiogenesis) and bone mineralization (i.e. osteogenesis), and related challenges, including future research directions.

Hybprinting for musculoskeletal tissue engineering

This review presents bioprinting methods, biomaterials, and printing strategies that may be used for composite tissue constructs for musculoskeletal applications. The printing methods discussed include those that are suitable for acellular and cellular components, and the biomaterials include soft and rigid components that are suitable for soft and/or hard tissues. We also present strategies that focus on the integration of cell-laden soft and acellular rigid components under a single printing platform. Given the structural and functional complexity of native musculoskeletal tissue, we envision that hybrid bioprinting, referred to as hybprinting, could provide unprecedented potential by combining different materials and bioprinting techniques to engineer and assemble modular tissues.

Carbon-Based Materials for Articular Tissue Engineering: From Innovative Scaffolding Materials toward Engineered Living Carbon

Carbon materials constitute a growing family of high-performance materials immersed in ongoing scientific technological revolutions. Their biochemical properties are interesting for a wide set of healthcare applications and their biomechanical performance, which can be modulated to mimic most human tissues, make them remarkable candidates for tissue repair and regeneration, especially for articular problems and osteochondral defects involving diverse tissues with very different morphologies and properties. However, more systematic approaches to the engineering design of carbon-based cell niches and scaffolds are needed and relevant challenges should still be overcome through extensive and collaborative research. In consequence, this study presents a comprehensive description of carbon materials and an explanation of their benefits for regenerative medicine, focusing on their rising impact in the area of osteochondral and articular repair and regeneration. Once the state-of-the-art is illustrated, innovative design and fabrication strategies for artificially recreating the cellular microenvironment within complex articular structures are discussed. Together with these modern design and fabrication approaches, current challenges, and research trends for reaching patients and creating social and economic impacts are examined. In a closing perspective, the engineering of living carbon materials is also presented for the first time and the related fundamental breakthroughs ahead are clarified.

Modelling of Stem Cells Microenvironment Using Carbon-Based Scaffold for Tissue Engineering Application-A Review

A scaffold is a crucial biological substitute designed to aid the treatment of damaged tissue caused by trauma and disease. Various scaffolds are developed with different materials, known as biomaterials, and have shown to be a potential tool to facilitate in vitro cell growth, proliferation, and differentiation. Among the materials studied, carbon materials are potential biomaterials that can be used to develop scaffolds for cell growth. Recently, many researchers have attempted to build a scaffold following the origin of the tissue cell by mimicking the pattern of their extracellular matrix (ECM). In addition, extensive studies were performed on the various parameters that could influence cell behaviour. Previous studies have shown that various factors should be considered in scaffold production, including the porosity, pore size, topography, mechanical properties, wettability, and electroconductivity, which are essential in facilitating cellular response on the scaffold. These interferential factors will help determine the appropriate architecture of the carbon-based scaffold, influencing stem cell (SC) response. Hence, this paper reviews the potential of carbon as a biomaterial for scaffold development. This paper also discusses several crucial factors that can influence the feasibility of the carbon-based scaffold architecture in supporting the efficacy and viability of SCs.

Fibrous Systems as Potential Solutions for Tendon and Ligament Repair, Healing, and Regeneration

Tendon and ligament injuries caused by trauma and degenerative diseases are frequent and affect diverse groups of the population. Such injuries reduce musculoskeletal performance, limit joint mobility, and lower people's comfort. Currently, various treatment strategies and surgical procedures are used to heal, repair, and restore the native tissue function. However, these strategies are inadequate and, in some cases, fail to re-establish the lost functionality. Tissue engineering and regenerative medicine approaches aim to overcome these disadvantages by stimulating the regeneration and formation of neotissues. Design and fabrication of artificial scaffolds with tailored mechanical properties are crucial for restoring the mechanical function of tendons. In this review, the tendon and ligament structure, their physiology, and performance are presented. On the other hand, the requirements are focused for the development of an effective reconstruction device. The most common fiber-based scaffolding systems are also described for tendon and ligament tissue regeneration like strand fibers, woven, knitted, braided, and braid-twisted fibrous structures, as well as electrospun and wet-spun constructs, discussing critically the advantages and limitations of their utilization. Finally, the potential of multilayered systems as the most effective candidates for tendon and ligaments tissue engineering is pointed out.

Hybrid Collagen Hydrogel/Chondroitin-4-Sulphate Fortified with Dermal Fibroblast Conditioned Medium for Skin Therapeutic Application

The current strategy for rapid wound healing treatment involves combining a biomaterial and cell-secreted proteins or biomolecules. This study was aimed at characterizing 3-dimensional (3D) collagen hydrogels fortified with dermal fibroblast-conditioned medium (DFCM) as a readily available acellular skin substitute. Confluent fibroblasts were cultured with serum-free keratinocyte-specific medium (KM1 and KM2) and fibroblast-specific medium (FM) to obtain DFCM. Subsequently, the DFCM was mixed with collagen (Col) hydrogel and chondroitin-4-sulphate (C4S) to fabricate 3D constructs termed Col/C4S/DFCM-KM1, Col/C4S/DFCM-KM2, and Col/C4S/DFCM-FM. The constructs successfully formed soft, semi-solid and translucent hydrogels within 1 h of incubation at 37 °C with strength of <2.5 Newton (N). The Col/C4S/DFCM demonstrated significantly lower turbidity compared to the control groups. The Col/C4S/DFCM also showed a lower percentage of porosity (KM1: 35.15 ± 9.76%; KM2: 6.85 ± 1.60%; FM: 14.14 ± 7.65%) compared to the Col (105.14 ± 11.87%) and Col/C4S (143.44 ± 27.72%) constructs. There were no changes in both swelling and degradation among all constructs. Fourier transform infrared spectrometry showed that all groups consisted of oxygen–hydrogen bonds (O-H) and amide I, II, and III. In conclusion, the Col/C4S/DFCM constructs maintain the characteristics of native collagen and can synergistically deliver essential biomolecules for future use in skin therapeutic applications.

Mesenchymal stromal cell-derived factors promote the colonization of collagen 3D scaffolds with human skin cells

The development of stem cell technology in combination with advances in biomaterials has opened new ways of producing engineered tissue substitutes. In this study, we investigated whether the therapeutic potential of an acellular porous scaffold made of type I collagen can be improved by the addition of a powerful trophic agent in the form of mesenchymal stromal cells conditioned medium (MSC-CM) in order to be used as an acellular scaffold for skin wound healing treatment. Our experiments showed that MSC-CM sustained the adherence of keratinocytes and fibroblasts as well as the proliferation of keratinocytes. Moreover, MSC-CM had chemoattractant properties for keratinocytes and endothelial cells, attributable to the content of trophic and pro-angiogenic factors. Also, for the dermal fibroblasts cultured on collagen scaffold in the presence of MSC-CM versus serum control, the ratio between collagen III and I mRNAs increased by 2-fold. Furthermore, the gene expression for α-smooth muscle actin, tissue inhibitor of metalloproteinase-1 and 2 and matrix metalloproteinase-14 was significantly increased by approximately 2-fold. In conclusion, factors existing in MSC-CM improve the colonization of collagen 3D scaffolds, by sustaining the adherence and proliferation of keratinocytes and by inducing a pro-healing phenotype in fibroblasts.

Long-term safety of the carbon fiber as an implant scaffold material

Permanent therapeutically placed implants often used in situations when regeneration or transplantation are not practical or possible. They include metallic grafts for osteosynthesis, bulk metallic glasses, ceramics, and non-resorbable polymers providing mechanical support. Repair of the tissues on micro scale can also benefit from the biocompatible permanent implants. Vascular graft engineering and repairs of the spinal cord and peripheral nerves are among the most demanding application. Carbon fibers (CF) have superior mechanical and chemical properties, however, their long-time safety was never systematically estimated. The biggest concern comes from residual polymers used for pyrolysis and epoxy laminating resins. Here we attempted to investigate survival of the cells cultured on carbon fibers and to evaluate the tissue responses towards the long-term implanted material. Immortalized rat Schwann cells displayed efficient sporadic attachment to the carbon fibers with survival rate over 90%. Carbon fiber implants in adipose and on connective tissues were tolerable by animals during about 40% of their lifespan with no signs of inflammation on physiological, morphological or gene expression level.

Key components of engineering vascularized 3-dimensional bioprinted bone constructs

Vascularization has a pivotal role in engineering successful tissue constructs. However, it remains a major hurdle of bone tissue engineering, especially in clinical applications for the treatment of large bone defects. Development of vascularized and clinically-relevant engineered bone substitutes with sufficient blood supply capable of maintaining implant viability and supporting subsequent host tissue integration remains a major challenge. Since only cells that are 100-200 µm from blood vessels can receive oxygen through diffusion, engineered constructs that are thicker than 400 µm face a challenging oxygenation problem. Following implantation in vivo, spontaneous ingrowth of capillaries in thick engineered constructs is too slow. Thus, it is critical to provide optimal conditions to support vascularization in engineered bone constructs. To achieve this, an in-depth understanding of the mechanisms of angiogenesis and bone development is required. In addition, it is also important to mimic the physiological milieu of native bone to fabricate more successful vascularized bone constructs. Numerous applications of engineered vascularization with cell-and/or microfabrication-based approaches seek to meet these aims. Three-dimensional (3D) printing promises to create patient-specific bone constructs in the future. In this review, we discuss the major components of fabricating vascularized 3D bioprinted bone constructs, analyze their related challenges, and highlight promising future trends.

Functionalization of Carbon Nanomaterials for Biomedical Applications

Over the past decade, carbon nanostructures (CNSs) have been widely used in a variety of biomedical applications. Examples are the use of CNSs for drug and protein delivery or in tools to locally dispense nucleic acids to fight tumor affections. CNSs were successfully utilized in diagnostics and in noninvasive and highly sensitive imaging devices thanks to their optical properties in the near infrared region. However, biomedical applications require a complete biocompatibility to avoid adverse reactions of the immune system and CNSs potentials for biodegradability. Water is one of the main constituents of the living matter. Unfortunately, one of the disadvantages of CNSs is their poor solubility. Surface functionalization of CNSs is commonly utilized as an efficient solution to both tune the surface wettability of CNSs and impart biocompatible properties. Grafting functional groups onto the CNSs surface consists in bonding the desired chemical species on the carbon nanoparticles via wet or dry processes leading to the formation of a stable interaction. This latter may be of different nature as the van Der Waals, the electrostatic or the covalent, the π-π interaction, the hydrogen bond etc. depending on the process and on the functional molecule at play. Grafting is utilized for multiple purposes including bonding mimetic agents such as polyethylene glycol, drug/protein adsorption, attaching nanostructures to increase the CNSs opacity to selected wavelengths or provide magnetic properties. This makes the CNSs a very versatile tool for a broad selection of applications as medicinal biochips, new high-performance platforms for magnetic resonance (MR), photothermal therapy, molecular imaging, tissue engineering, and neuroscience. The scope of this work is to highlight up-to-date using of the functionalized carbon materials such as graphene, carbon fibers, carbon nanotubes, fullerene and nanodiamonds in biomedical applications.

Telas de carbón activado: generalidades y aplicaciones

Los carbones activados (CA) son de gran interés debido a las excepcionales propiedades físicas y químicas que poseen, estos materiales se presentan en forma de gránulos o polvos, pero recientemente se ha comercializado una nueva forma de CA conocida como Fibra de Carbón Activado (FCA), que se puede fabricar en dos presentaciones, como tela y como fieltro. Las Telas de carbón activado (TCA) son materiales que poseen excelentes propiedades que las hacen superiores en comparación con las formas tradicionales y se producen a partir de precursores, mediante diversos procesos que incluyen activación física o química, entre los agentes impregnantes más utilizados se encuentran el KOH, H3PO4, ZnCl2, AlCl3, NH4Cl, Na2CO3 y K2CO3, cuya función principal es servir como deshidratantes impidiendo al mismo tiempo la producción de alquitranes. Las características y propiedades que adquieren las TCA dependen de la naturaleza del material que se utilizó para producirlas, estas características han sido aprovechadas en una gran cantidad de aplicaciones, como: medicina, sistemas de soporte de catalizadores, en la industria para la adsorción de contaminantes, purificación de aguas y tratamiento de aguas residuales, entre otras. Esta revisión muestra las generalidades y aplicaciones en estudios recientes y resume las aplicaciones de las TCA de las diferentes investigaciones realizadas, así como su proceso de obtención.