Control of the Size of Silver Nanoparticles and Release of Silver in Heat Treated SiO₂-Ag Composite Powders

Property evaluation of graphene - reinforced Al-Cu-Li (2195) alloy for lightweight structural applications

Aluminium 2XXX series are prominently used in aerospace structural applications, especially Al-Cu-Li Alloys, which are used in the space exploration sector. This work aims to identify a substitute material and an effective manufacturing technique for producing suitable metal matrix composites intended for super lightweight tank structural applications. This work describes the property evaluation of 0.5 wt% of graphene-reinforced AA2195 composite processed through vacuum induction melting (VIM) technique under a dynamic inert atmosphere. Thus, the fabricated final cast plate was homogenized and hot rolled following the T8 heat treatment process. Incorporating 0.5 wt% of 2D - Graphene Sheets resulted in a 33 % enhancement in UTS and a 40 % increase in HRB relative to the AA2195 parent alloy. EBSD and Transmission Kikuchi Diffraction (TKD) analysis confirmed that the Graphene Sheets are homogeneously dispersed throughout the composite plate.

SERS aptasensor detection of aflatoxin B1 based on silicon-au-ag Janus nanocomposites

Aflatoxin B1 (AFB1) is a prevalent contaminant in maize, posing significant threats to human health. This study designed AuAg Janus NPs with intrinsic Raman signals as signal probes and SiO2@AgNPs as capture probes. The two were coupled through complementary base pairing to ensure the ordered, controlled distribution of noble metal nanoparticles. The AuAg Janus NPs and the highly stable SiO2 carrier is expected to avoid the adverse effects on stability caused by using signal molecules and the formation of random aggregates when using the noble metal nanoparticle gap effect to concentrate on the electromagnetic field. This study improved the negative impact of AgNPs' high surface energy on their uniformity, while enhancing the pH adaptability of AuAg Janus NPs. In the presence of AFB1, the composite disintegrates, and the SERS intensity showed a negative correlation with AFB1 concentration, enabling highly sensitive and stable detection of AFB1.

Bioinspired synthesis of multifunctional, highly stable polymeric templated silver-silica colloids as catalytic and antibacterial coatings for paper

In this paper, a simple, bottom up, bioinspired technique is proposed for the synthesis of highly stable colloids of silica supported spherical silver nanoparticles (SiO2@Ag) that act as efficient catalytic and antimicrobial coatings for an organic substrate, filter paper. The core - shell structure and the highly branched dendritic polymer, poly(ethylene)imine, enabled the precise control of growth rate and morphology of silica and silver nanoparticles. The polymer also enabled the deposition of these nanoparticles onto an organic substrate, filter paper, through immersion by modifying its surface. The catalytic and antibacterial properties of these samples were assessed. The results obtained from this analysis showed a complete degradation of an aqueous pollutant, 4-nitrophenol, for 6 successive catalytic cycles without intermediate purification steps. Furthermore, the polymeric silica-silver suspension proved to express antibacterial activity against both Gram-positive and Gram-negative bacteria (Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa). The antibacterial properties were evaluated according to the disk diffusion method, whereas the Minimum Inhibitory Concentration was also determined. The samples were examined by Scanning Electron Microscopy, Transmission Electron Microscopy, X-ray diffraction analysis, z-potential analysis, Fourier Transform Infrared Spectroscopy and Ultraviolet-visible Spectroscopy.

Sensitive, Stable, and Recyclable ZnO/Ag Nanohybrid Substrates for Surface-Enhanced Raman Scattering Metrology

Surface-enhanced Raman scattering is a practical, noninvasive spectroscopic technique that measures chemical fingerprints for varieties of molecules in multiple applications. However, synthesizing appropriate substrates for practical, long-term applications of this method has always been a challenging task. In the present study, we show that ZnO/Ag nanohybrid substrates may act as highly stable, sensitive, and recyclable substrates for surface-enhanced Raman scattering, as illustrated by the detection of methylene blue, selected as a test dye molecule with self-cleaning functionalities. Specifically, we demonstrate the detection enhancement factor of 3.7 × 107 along with exceptional long-term stability explained in terms of the localized surface plasmon resonance from the Ag nanocrystals embedded into the chemically inert ZnO nanoparticles, constituting the nanohybrid. Significantly, these substrates can be efficiently cleaned and regenerated while maintaining their high performance upon recycling. As a result, using these substrates, up to 10-12 M detection sensitivity has been demonstrated, enabling the accuracy required in modern environmental monitoring, bioassays, and analytical chemistry. Thus, ZnO nanoparticles with embedded Ag nanocrystals constitute a novel class of advanced nanohybrid substrates for use in multiple applications of surface-enhanced Raman scattering metrology.

Effects of Raman Labeling Compounds on the Stability and Surface-Enhanced Raman Spectroscopy Performance of Ag Nanoparticle-Embedded Silica Nanoparticles as Tagging Materials

Surface-enhanced Raman spectroscopy (SERS) tagging using silica(SiO2)@Ag nanoparticles (NPs) is easy to handle and is being studied in various fields, including SERS imaging and immunoassays. This is primarily due to its structural advantages, characterized by high SERS activity. However, the Ag NPs introduced onto the SiO2 surface may undergo structural transformation owing to the Ostwald ripening phenomenon under various conditions. As a result, the consistency of the SERS signal decreases, reducing their usability as SERS substrates. Until recently, research has been actively conducted to improve the stability of single Ag NPs. However, research on SiO2@Ag NPs used as a SERS-tagging material is still lacking. In this study, we utilized a Raman labeling compound (RLC) to prevent the structural deformation of SiO2@Ag NPs under various conditions and proposed excellent SiO2@Ag@RLC-Pre NPs as a SERS-tagging material. Using various RLCs, we confirmed that 4-mercaptobenzoic acid (4-MBA) is the RLC that maintains the highest stability for 2 months. These results were also observed for the SiO2@Ag NPs, which were unstable under various pH and temperature conditions. We believe that SERS tags using SiO2@Ag NPs and 4-MBA can be utilized in various applications on based SERS because of the high stability and consistency of the resulting SERS signal.

Silver Compounds for Caries Management

Silver metal and compounds have antibacterial properties, although their action's mechanisms are not fully understood. Scientists generally consider that silver disrupts the bacterial cell wall. It causes a structural change in the bacterial cell membrane and cytoplasm. It also stops deoxyribonucleic acid replication, resulting in inactivating enzymatic activity and cell death. The antimicrobial effect of silver-containing compounds relies on the release of bioactive silver ions. Hence, silver metal and compounds have been used in medicine to prevent infection for hundreds of years. Silver metal and compounds are also used as antibacterial agents in dentistry. Studies have shown that silver compounds are effective in the management of dental caries. Fluoride-containing silver compounds have been found in experiments to be beneficial at remineralising dental cavities. Silver diamine fluoride (SDF) can assist in preventing and arresting tooth cavities. The World Health Organization included SDF in its Model List of Essential Medicine for both adults and children in 2021. Clinicians also use SDF to manage dentine hypersensitivity as well as to inhibit growth of periodontal pathogens. However, traditional silver compounds cause tooth discolouration because of the silver-staining effect. These side effects of their applications depend on the amount applied and the frequency of application. Researchers are developing nanosilver fluoride and silver nanoparticles to overcome the staining. This review gives an overview of the antibacterial mechanism of silver compounds, namely silver nitrate, silver fluoride, SDF, silver nanoparticles, and nano silver fluoride for caries management. The outlook for the future development of silver compounds will be discussed.

Antimicrobial potential of linear low-density polyethylene food packaging with Ag nanoparticles in different carriers (Silica and Hydroxyapatite)

Silver nanoparticles incorporation into polymeric packaging aims to prevent microbiological contamination in food products, thus ensuring superior food safety and preservation. In this context, this study aimed to verify the antimicrobial efficacy of linear low-density polyethylene (LLDPE) films incorporated with silver nanoparticles (AgNPs) dispersed in silica (SiO2) and hydroxyapatite (HAP) carriers at different concentrations. AgNPs + carriers polymer films were characterized at 0.2, 0.4, and 0.6% concentrations using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission gun-scanning electron microscope (FEG-SEM), thermogravimetric analyzer (TGA), differential scanning calorimetry (DSC), and migration in acidic and non-acidic simulants. Antimicrobial action was investigated on Gram-positive Staphylococcus aureus, Gram-negative Escherichia coli, and the Penicillium expansum and Fusarium solani fungi with antimicrobial activity by direct contact test and bacterial imaging by scanning electron microscopy. AgNPs addition to the LLDPE matrix did not interfere with the films' chemical and thermal properties and presented no significant migration to the external medium. For antimicrobial action, silver nanoparticles showed, in most concentrations, an inhibition percentage higher than 90% on all microorganisms studied, regardless of the carrier. However, a greater inhibitory action on S. aureus and between carriers was found, making hydroxyapatite more effective. The results indicated that nanostructured films with AgNPs + hydroxyapatite showed more promising antimicrobial action on microorganisms than AgNPs + silica, making hydroxyapatite with silver nanoparticle potentially useful in food packaging, improving safety and maintaining quality.

Recent Studies on Metal-Embedded Silica Nanoparticles for Biological Applications

Recently, silica nanoparticles (NPs) have attracted considerable attention as biocompatible and stable templates for embedding noble metals. Noble-metal-embedded silica NPs utilize the exceptional optical properties of novel metals while overcoming the limitations of individual novel metal NPs. In addition, the structure of metal-embedded silica NPs decorated with small metal NPs around the silica core results in strong signal enhancement in localized surface plasmon resonance and surface-enhanced Raman scattering. This review summarizes recent studies on metal-embedded silica NPs, focusing on their unique designs and applications. The characteristics of the metal-embedded silica NPs depend on the type and structure of the embedded metals. Based on this progress, metal-embedded silica NPs are currently utilized in various spectroscopic applications, serving as nanozymes, detection and imaging probes, drug carriers, photothermal inducers, and bioactivation molecule screening identifiers. Owing to their versatile roles, metal-embedded silica NPs are expected to be applied in various fields, such as biology and medicine, in the future.

Adsorption and photodegradation of organic contaminants by silver nanoparticles: isotherms, kinetics, and computational analysis

In view of the widespread and distribution of several classes and types of organic contaminants, increased efforts are needed to reduce their spread and subsequent environmental contamination. Although several remediation approaches are available, adsorption and photodegradation technologies are presented in this review as one of the best options because of their environmental friendliness, cost-effectiveness, accessibility, less selectivity, and wider scope of applications among others. The bandgap, particle size, surface area, electrical properties, thermal stability, reusability, chemical stability, and other properties of silver nanoparticles (AgNPS) are highlighted to account for their suitability in adsorption and photocatalytic applications, concerning organic contaminants. Literatures have been reviewed on the application of various AgNPS as adsorbent and photocatalyst in the remediation of several classes of organic contaminants. Theories of adsorption have also been outlined while photocatalysis is seen to have adsorption as the initial mechanism. Challenges facing the application of silver nanoparticles have also been highlighted and possible solutions have been presented. However, current information is dominated by applications on dyes and the view of the authors supports the need to strengthen the usefulness of AgNPS in adsorption and photodegradation of more classes of organic contaminants, especially emerging contaminants. We also encourage the simultaneous applications of adsorption and photodegradation to completely convert toxic wastes to harmless forms.

Multi-Wavelength-Recognizable Memristive Devices via Surface Plasmon Resonance Effect for Color Visual System

Photoelectric memristor has attracted many attentions thanks to their promising potential in optical communication chips and artificial vision systems. However, the implementation of an artificial visual system based on memristive devices remains a considerable challenge because most photoelectric memristors cannot recognize color. Herein, multi-wavelength recognizable memristive devices based on silver(Ag) nanoparticles (NPs) and porous silicon oxide (SiO_x ) nanocomposites are presented. Rely on the effects of localized surface plasmon resonance (LSPR) and optical excitation of Ag NPs in SiO_x , the set voltage of the device can be gradually reduced. Moreover, the current overshoot problem is alleviated to suppress conducting filament overgrowth after visible light irradiation with different wavelengths, resulting in diverse low resistance states (LRS). Taking advantage of the characteristics of controlled switching voltage and LRS resistance distribution, color image recognition is finally realized in the present work. X-ray photoelectron spectroscopy (XPS) and conductive atomic force microscopy (C-AFM) show that the light irradiation plays an important role on resistive switching (RS) process: the photo-assisted Ag ionization leads to a significant reduction of set voltage and overshoot current. This work provides an effective method toward the development of multi-wavelength-recognizable memristive devices for future artificial color vision system.

A Combinatorial Study Investigating the Growth of Ultrasmall Embedded Silver Nanoparticles upon Thermal Annealing

Ultrasmall nanoparticles (NPs) with a high active surface area are essential for optoelectronic and photovoltaic applications. However, the structural stability and sustainability of these ultrasmall NPs at higher temperatures remain a critical problem. Here, we have synthesized the nanocomposites (NCs) of Ag NPs inside the silica matrix using the atom beam co-sputtering technique. The post-deposition growth of the embedded Ag NPs is systematically investigated at a wide range of annealing temperatures (ATs). A novel, fast, and effective procedure, correlating the experimental (UV-vis absorption results) and theoretical (quantum mechanical modeling, QMM) results, is used to estimate the size of NPs. The QMM-based simulation, employed for this work, is found to be more accurate in reproducing the absorption spectra over the classical/modified Drude model, which fails to predict the expected shift in the LSPR for ultrasmall NPs. Unlike the classical Drude model, the QMM incorporates the intraband transition of the conduction band electrons to calculate the effective dielectric function of metallic NCs, which is the major contribution of LSPR shifts for ultrasmall NPs. In this framework, a direct comparison is made between experimentally and theoretically observed LSPR peak positions, and it is observed that the size of NPs grows from 3 to 18 nm as AT increases from room temperature to 900 °C. Further, in situ grazing-incidence small- & wide-angle X-ray scattering and transmission electron microscopy measurements are employed to comprehend the growth of Ag NPs and validate the UV + QMM results. We demonstrate that, unlike chemically grown NPs, the embedded Ag NPs ensure greater stability in size and remain in an ultrasmall regime up to 800 °C, and beyond this temperature, the size of NPs increases exponentially due to dominant Ostwald ripening. Finally, a three-stage mechanism is discussed to understand the process of nucleation and growth of the silica-embedded Ag NPs.

Handheld, Low-Cost, Aptamer-Based Sensing Device for Rapid SARS-CoV-2 RNA Detection Using Novelly Synthesized Gold Nanoparticles

The development of a cost-efficient device to rapidly detect pandemic viruses is paramount. Hence, an innovative and scalable synthesis of metal nanoparticles followed by its usage for rapid detection of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has been reported in this work. The simple synthesis of metal nanoparticles utilizing tin as a solid-state reusable reducing agent is used for the SARS-CoV-2 ribonucleic acid (RNA) detection. Moreover, the solid-state reduction process occurs faster and leads to the enhanced formation of silver and gold nanoparticles (AuNPs) with voltage. By adding tin as a solid-state reducing agent with the precursor, the nanoparticles are formed within 30 s. This synthesis method can be easily scaled up for a commercially viable process to obtain different-sized metal nanoparticles. This is the first disclosure of the usage of tin as a reusable solid-state reducing agent for metal nanoparticle synthesis. An electronic device, consisting of AuNPs functionalized with a deoxyribonucleic acid (DNA)-based aptamer, can detect SARS-CoV-2 RNA in less than 5 min. With an increase in SARS-CoV-2 variants, such as Delta and Omicron, the detection device could be used for identifying the nucleic acids of the COVID-19 variants by modifying the aptamer sequence. The reported work overcomes the drawbacks of complex instrumentation, trained labor, and increased turnaround time.

Silver Nanoparticles Biosynthesized with Spruce Bark Extract-A Molecular Aggregate with Antifungal Activity against Candida Species

Due to their high content of biomolecules, combined with silver's well known antimicrobial potential, silver nanoparticles biosynthesized using spruce bark (AgNP SBEs) demonstrate antibacterial and antioxidant activity, making them a versatile option for developing new antimicrobial agents that might be used for medical treatment or as adjuvants for the classical agents. This study aims to analyze if silver nanoparticles (AgNPs) mediated by spruce bark extract (SBE) and silver salts (AgNP SBE Acetate, AgNP SBE Nitrate) presents antifungal activity against five different Candida spp., synergistic activity with fluconazole, and if they interact with some virulence factors of C. albicans. AgNP SBEs presented MICs (minimum inhibitory concentrations) for all the five tested Candida spp. AgNP SBEs inhibited the growth of C. parapsilosis, C. krusei, and C. guilliermondii, exerted synergistic activity with fluconazole for C. parapsilosis and C. guilliermondii, and inhibited biofilm production for C. albicans, C. auris, and C. guilliermondii. MICs of AgNP SBE Acetate significantly inhibited the production of germ tubes of C. albicans. The expression of C. albicans SAP2 gene was down-regulated by the short-time treatment with MICs of AgNP SBE Acetate, while ALS3 and HSP70 genes were up-regulated by the AgNPs MICs. These results emphasize the potential of using the AgNP SBEs as treatments/adjuvants options, not only against the redundant C. albicans but also for the non-albicans Candida species (which are not as frequently involved in human pathologies, but, sometimes, can be more aggressive).

Ag-Modified LiMn2O4 Cathode for Lithium-Ion Batteries: Coating Functionalization

In this work, the properties of silver-modified LiMn2O4 cathode materials are revisited. We study the influence of calcination atmosphere on the properties of the Ag-coated LiMn2O4 (Ag/LMO) and highlight the silver oxidation. The effect of the heat treatment in vacuum is compared with that in air by the characterization of the structure, specific surface area, Li transport properties and electrochemical performance of Ag/LMO composites. Surface analyses (XPS and Raman spectroscopy) show that the nature of the coating (~3 wt.%) differs with the calcination atmosphere: Ag/LMO(v) calcined in vacuum displays Ag nanospheres and minor AgO content on its surface (specific surface area of 4.1 m2 g−1), while Ag/LMO(a) treated in air is mainly covered by the AgO insulating phase (specific surface area of 0.6 m2 g−1). Electrochemical experiments emphasize that ~3 wt.% Ag coating is effective to minimize the drawbacks of the spinel LiMn2O4 (Mn dissolution, cycling instability, etc.). The Ag/LMO(v) electrode shows high capacity retention, good cyclability at C/2 rate and capacity fade of 0.06% per cycle (in 60 cycles).

Design and development of porous terracotta disc: An eco-friendly novel control agent for mosquito larvae

In the present work, we synthesized silver nanoparticles supported by rice husk by hydrothermal treatment, as-synthesized silver nanoparticles rice husk (AgNPs-RH) bio-composite mixed with potter clay thoroughly, molded, dried into a disc-shaped before firing and applying as a point of use larvicidal agent. As designed, porous terracotta disc (PTD) infused with AgNPs-RH-biocomposite were characterized by UV spectrophotometer, Fourier-transform infrared spectroscopy, transmission electron microscopy, X-ray diffraction analysis and energy-dispersive X-ray spectroscopy. The amount of silver ions released from the PTD was also found to be within the prescribed limit of 0.1 ppm-level. Later we dropped the PTD and tested its larvicidal activity against the IV^th instar larva stage of Aedes, Anopheles and Culex species. We found 100% larvicidal mortality in 24 h of exposure to the designed PTD and the amount of silver released from the porous disc was found to be 0.0343 ppm. Further from the histopathological studies of dead larvae revealed that the silver ions from the PTD have substantially damaged the exoskeleton of larvae.

Enhancing ultraviolet-to-visible rejection ratio by inserting an intrinsic NiO layer in p-NiO/n-Si heterojunction photodiodes

Conventionally, p-NiO/n-Si (p-n) heterojunction photodiodes (HPDs) exhibit a larger visible response than the ultraviolet response due to the thick Si substrate; hence, it is used as a broadband photodetector with a poor ultraviolet (UV)-to-visible rejection ratio. Herein, an intrinsic NiO (i-NiO) layer is inserted between the p-NiO and the n-Si substrate to fabricate p-NiO/i-NiO/n-Si (p-i-n) HPDs, significantly suppressing leakage current and visible response. Compared with the conventional p-n HPDs, the insertion of the i-NiO layer significantly reduces leakage current by approximately 241 times and enhances the rectification ratio from 13.8 to 3228 for the p-n and p-i-n HPDs. The insertion of an i-NiO layer not only increases the UV-response but also suppresses the visible response. These issues enhance the UV-to-visible rejection ratio from 72.2 in p-n HPDs to 915.3 in p-i-n HPDs. The p-NiO reveals a poorer crystalline structure than the i-NiO film because the Ag dopants accumulate at the grain boundary and inhibit crystalline growth. The Ag diffusion in the Si substrate causes defect states within the Si bandgap, whereas it is retarded by the i-NiO layer in the p-i-n HPDs. The poor crystallinity in the p-NiO and defect states within the Si bandgap contributes to a high leakage current and visible response in p-n HPDs. The p-i-n HPDs demonstrate a higher UV-response due to absorption by the i-NiO layer. Because visible light cannot be absorbed by the i-NiO layer, visible response is suppressed in p-i-n HPDs.

Synthesis of Silver Nanoparticles Using a Novel Cyanobacteria Desertifilum sp. extract: Their Antibacterial and Cytotoxicity Effects

BACKGROUND

The emergence of multi drug-resistant (MDR) bacterial infections and cancer has necessitated the development and discovery of alternative eco-safe antibacterial and anticancer agents. Biogenic fabrication of metallic nanoparticles is an emerging discipline for production of nanoproducts that exert potent anticancer and antibacterial activity, and do not suffer from the limitations inherent in physiochemical synthesis methods.

METHODOLOGY

In this study, we isolated, purified, and characterized a novel cyanobacteria extract (Desertifilum IPPAS B-1220) to utilize in biofabrication of silver nanoparticles (D-SNPs). D-SNPs were produced by adding Desertifilum extract to silver nitrate solution under controlled conditions. Biofabrication of D-SNPs was confirmed using a UV-Vis spectrophotometer. The resultant D-SNPs were characterized using XRD, FTIR, SEM, and TEM. The toxicity of D-SNPs against five pathogenic bacteria and three cancer cell lines (MCF-7, HepG2, and Caco-2) was evaluated.

RESULTS

Formation of D-SNPs was indicated by a color change from pale yellow to dark brown. The peak of the surface plasmon resonance of the D-SNPs was at 421 nm. The XRD detected the crystallinity of D-SNPs. FTIR showed that polysaccharides and proteins may have contributed to the biofabrication of D-SNPs. Under SEM and TEM, the D-SNPs were spherical with diameter ranges from 4.5 to 26 nm. The D-SNPs significantly suppressed the growth of five pathogenic bacteria, and exerted cytotoxic effects against MCF-7, HepG2, and Caco-2 cancer cells with IC50 values of 58, 32, and 90 µg/mL, respectively.

CONCLUSION

These findings showed for the first time the potentiality of novel cyanobacteria strain Desertifilum IPPAS B-1220 to fabricate small SNPs that acted as potent anticancer and antibacterial material against different cancer cell lines and pathogenic bacterial strains. These findings encourage the researchers to focus on cyanobacteria in general and especially Desertifilum sp. IPPAS B-1220 for synthesizing different NPs that opening the window for new applications.

Photoelectrochemical Behavior of Silver Nanoparticles inside Mesoporous Titania: Plasmon-Induced Charge Separation Effect

The self-assembly block copolymer method was used to synthesize mesoporous titania films and silver nanoparticles (NPs) were grown inside the films. Such silver NPs-titania films are known for their multicolor photochromic properties due to a photo-oxidation reaction of silver in the presence of titania under light excitation which is attributed to a plasmon induced charge separation. Here, the photoelectrochemical properties of these composite films have been investigated at different light wavelengths and chemical environment in order to characterize the light-induced redox reactivity modifications. Cyclic voltammetry study shows that the Ag⁺ electro-reduction peak potential varies depending on the light irradiation, which determines the state of the silver nanoparticles complexed or not by titania.