Further Theoretical Insight into the Mechanical Properties of Polycaprolactone Loaded with Organic-Inorganic Hybrid Fillers

Advancements in gradient bone scaffolds: enhancing bone regeneration in the treatment of various bone disorders

Bone scaffolds are widely employed for treating various bone disorders, including defects, fractures, and accidents. Gradient bone scaffolds present a promising approach by incorporating gradients in shape, porosity, density, and other properties, mimicking the natural human body structure. This design offers several advantages over traditional scaffolds. A key advantage is the enhanced matching of human tissue properties, facilitating cell adhesion and migration. Furthermore, the gradient structure fosters a smooth transition between scaffold and surrounding tissue, minimizing the risk of inflammation or rejection. Mechanical stability is also improved, providing better support for bone regeneration. Additionally, gradient bone scaffolds can integrate drug delivery systems, enabling controlled release of drugs or growth factors to promote specific cellular activities during the healing process. This comprehensive review examines the design aspects of gradient bone scaffolds, encompassing structure and drug delivery capabilities. By optimizing the scaffold's inherent advantages through gradient design, bone regeneration outcomes can be improved. The insights presented in this article contribute to the academic understanding of gradient bone scaffolds and their applications in bone tissue engineering.

Highly Reinforced Acrylic Resins for Hard Tissue Engineering and Their Suitability to Be Additively Manufactured through Nozzle-Based Photo-Printing

Mineralized connective tissues represent the hardest materials of human tissues, and polymer based composite materials are widely used to restore damaged tissues. In particular, light activated resins and composites are generally considered as the most popular choice in the restorative dental practice. The first purpose of this study is to investigate novel highly reinforced light activated particulate dental composites. An innovative additive manufacturing technique, based on the extrusion of particle reinforced photo-polymers, has been recently developed for processing composites with a filler fraction (w/w) only up to 10%. The second purpose of this study is to explore the feasibility of 3D printing highly reinforced composites. A variety of composites based on 2,2-bis(acryloyloxymethyl)butyl acrylate and trimethylolpropane triacrylate reinforced with silica, titanium dioxide, and zirconia nanoparticles were designed and investigated through compression tests. The composite showing the highest mechanical properties was processed through the 3D bioplotter AK12 equipped with the Enfis Uno Air LED Engine. The composite showing the highest stiffness and strength was successfully processed through 3D printing, and a four-layer composite scaffold was realized. Mechanical properties of particulate composites can be tailored by modifying the type and amount of the filler fraction. It is possible to process highly reinforced photopolymerizable composite materials using additive manufacturing technologies consisting of 3D fiber deposition through extrusion in conjunction with photo-polymerization.

Ozone-treated poly-ε-caprolactone scaffolds for bone regeneration

The aim of this paper was the creation of porous 3D substrates and scaffolds of polycaprolactone (PCL) and the analysis of the effect of an ozone treatment on their performance, in collaboration with the Institute for Polymers, Composites and Biomaterials (IPCB) of the National Research Council (CNR). The nanoindentation tests showed that the substrates treated with ozone exhibit lower hardness values than the untreated ones, suggesting that the treatment carried out makes these substrates "softer". From the small punch tests carried out, very similar load-displacement curves were obtained for treated and untreated PCL substrates, characterized by an initial linear section, followed by a decrease in the slope until reaching a value maximum for the load and, finally, from a reduction of the load until failure. Tensile tests showed ductile behavior for both treated and untreated substrates. The results obtained showed that the treatment carried out with ozone does not significantly alter the values of the modulus (E) and of the maximum effort (σmax). Finally, preliminary biological analyzes carried out on substrates and 3D scaffolds using an appropriate assay (Alamar Blue Assay), useful for determining cellular metabolic activity, showed that ozone treatment appears to improve aspects relating to cell viability/proliferation.

Calvaria Critical Size Defects Regeneration Using Collagen Membranes to Assess the Osteopromotive Principle: An Animal Study

Guided bone regeneration (GBR) is a common practice in implantology, and it is necessary to use membranes in this process. The present study aimed to evaluate the osteopromotive principle of two porcine collagen membranes in critical-size defects at rats calvaria. Ninety-six Albinus Wistar rats were divided into BG (positive control), JS, CS, and CG (negative control) groups and were sacrificed at 7, 15, 30, and 60 days postoperatively. The samples were assessed by histological, histometric, immunohistochemical, and microtomographic analyses. More intense inflammatory profile was seen in the JS and CS groups (p < 0.05). At 60 days, the JS group showed a satisfactory osteopromotive behavior compared to BG (p = 0.193), while CS did not demonstrate the capacity to promote bone formation. At the immunohistochemical analysis, the CS showed mild labeling for osteocalcin (OC) and osteopontin (OP), the JS demonstrated mild to moderate for OC and OP and the BG demonstrated moderate to intense for OC and OP. The tridimensional analysis found the lowest average for the total volume of newly formed bone in the CS (84,901 mm2), compared to the BG (319,834 mm2) (p < 0.05). We conclude that the different thicknesses and treatment techniques of each membrane may interfere with its biological behavior.

Orsellinic acid-loaded chitosan nanoparticles in gelatin/nanohydroxyapatite scaffolds for bone formation in vitro

AIM

Orsellinic acid (2,4-Dimethoxy-6-methylbenzoic acid) (OA) is a hydrophobic polyphenolic compound with therapeutic potential, but its impact on actuating osteogenesis remains unknown. The bioavailability of OA is hampered by its hydrophobic nature. This study aimed to fabricate nano-drug delivery system-based scaffolds for OA and test its potential for osteogenesis in vitro.

MATERIALS AND METHODS

OA was loaded into chitosan nanoparticles (nCS + OA) using the ionic gelation technique at different concentrations. nCS + OA were incorporated onto the scaffolds containing gelatin (Gel) and nanohydroxyapatite (nHAp) by the lyophilization method. Biocomposite scaffolds were examined for their physicochemical and material characteristic properties. The effect of OA in the scaffolds for osteoblast differentiation was determined by alizarin red and von Kossa staining at the cellular level and by reverse transcriptase-qPCR and western blot analysis at the molecular level.

KEY FINDINGS

The scaffolds showed excellent physiochemical and material characteristics and remained cyto-friendly to mouse mesenchymal stem cells (mMSCs, C3H10T1/2). The release of OA from Gel/nHAp/nCS scaffolds enhanced the differentiation of mMSCs towards osteoblasts, as observed through cellular and molecular studies. Moreover, the osteogenic potential of OA was mediated by the activation of FAK and ERK signaling pathways through integrins.

SIGNIFICANCE

The inclusion of OA into Gel/nHAp/nCS biocomposite scaffolds at 80 μM concentration promoted osteoblast differentiation via cell adhesion mediated signaling, compared with that shown by Gel/nHAp/nCS alone. Overall, this study identified the potential therapeutic OA containing Gel/nHAp/nCS scaffolds, accelerating its potential for clinical application towards bone regeneration.

A hierarchical bilayer architecture for complex tissue regeneration

Engineering a complete, physiologically functional, periodontal complex structure remains a great clinical challenge due to the highly hierarchical architecture of the periodontium and coordinated regulation of multiple growth factors required to induce stem cell multilineage differentiation. Using biomimetic self-assembly and microstamping techniques, we construct a hierarchical bilayer architecture consisting of intrafibrillarly mineralized collagen resembling bone and cementum, and unmineralized parallel-aligned fibrils mimicking periodontal ligament. The prepared biphasic scaffold possesses unique micro/nano structure, differential mechanical properties, and growth factor-rich microenvironment between the two phases, realizing a perfect simulation of natural periodontal hard/soft tissue interface. The interconnected porous hard compartment with a Young's modulus of 1409.00 ± 160.83 MPa could induce cross-arrangement and osteogenic differentiation of stem cells in vitro, whereas the micropatterned soft compartment with a Young's modulus of 42.62 ± 4.58 MPa containing abundant endogenous growth factors, could guide parallel arrangement and fibrogenic differentiation of stem cells in vitro. After implantation in critical-sized complete periodontal tissue defect, the biomimetic bilayer architecture potently reconstructs native periodontium with the insertion of periodontal ligament fibers into newly formed cementum and alveolar bone by recruiting host mesenchymal stem cells and activating the transforming growth factor beta 1/Smad3 signaling pathway. Taken together, integration of self-assembly and microstamping strategies could successfully fabricate a hierarchical bilayer architecture, which exhibits great potential for recruiting and regulating host stem cells to promote synergistic regeneration of hard/soft tissues.

Preparation of the bioglass/chitosan-alginate composite scaffolds with high bioactivity and mechanical properties as bone graft materials

Bioglass/chitosan-alginate (BCA) composite scaffolds with remarkable performance for bone tissue engineering are successfully prepared by freeze-drying method. The influence of the addition amount of sodium alginate (SA) on the microstructure, porosity, pore size, swelling ratio, degradation ratio, mechanical properties and mineralization ability of BCA composite scaffolds is studied and characterized by various techniques of the scanning electron microscopy, X-ray diffraction, infrared absorption spectrometer and so on. The results show that the BCA composite scaffolds have the three-dimensional interconnected network structure with the high porosity of 82%-87% and a suitable average pore size of 140-200 μm. With the increase of SA addition, the porosity and pore size of BCA gradually reduced and the thickness of pore wall increased. The swelling and degradation ratios decreased gradually with the raising SA and increased with the prolongation of soaking time in PBS. The mechanical strength of BCA was also significantly enhanced, and the mineralization ability of bioglass was effectively deployed with the adding SA of BCA. The improved performance of BCA may be attributed to the formed 3D network structure, activated bioavailability and crosslinking ability between chitosan and SA. It indicates that BCA composite scaffolds have potential applications in bone issues engineering.

3D porous PCL-PEG-PCL / strontium, magnesium and boron multi-doped hydroxyapatite composite scaffolds for bone tissue engineering

Bioceramic/polymer composite systems have gained importance in treating hard tissue damages using bone tissue engineering (BTE). In this context, it was aimed to develop 3D porous composite PCL-PEG-PCL scaffolds containing different amounts of B, Sr and Mg multi-doped HA that can provide bone regeneration in the bone defect area and to investigate the effect of both the amount of inorganic phase and the porosity on the mechanical and the biological properties. B-Sr-Mg multi-doped HA and PCL-PEG-PCL copolymer were successfully synthesized. PCL-PEG-PCL composite scaffolds containing different amounts of hydroxyapatite (HA) (10% and 20 wt%) were produced with the desired porosity (50% and 60%) by compression-molding and particulate leaching method. The porosity of the scaffolds was determined between 47% and 59%. HA/PCL-PEG-PCL composite scaffolds were subjected to a 3-week degradation test and showed negligible (0.2-0.5%) degradation. The water uptake percentage of the composite scaffolds with 60% porosity was the highest among all groups. Presence of HA in the scaffolds improved the water adsorption and the mechanical properties. Compressive strength of the scaffolds was between 9.32 and 24.27 MPa and 20% 2Sr0.5BHA scaffolds were found to have the maximum compressive strength. Compressive strength of 50% porous samples was higher than that of 60% porous samples. In the relative cell viability (%) test, the highest viability was observed on the scaffolds with HA and 2Sr0.5BHA. The specific ALP activity level of the cells on the scaffolds containing 2Sr0.5BHA was significantly higher (2.6 times) than that of the control group. The amount of porosity did not make a significant difference in cellular response. It was concluded that PCL-PEG-PCL composite scaffolds with 2Sr0.5BHA have the potential to be used in BTE.

Nylon lattice design parameter effects on additively manufactured structural performance

Lattice structures are used in a multitude of applications from medical to aerospace, and their adoption in these applications has been further enabled by additive manufacturing. Lattice performance is governed by a multitude of variables and estimating this performance may be needed during various phases of the design and validation process. Numerical modeling and constitutive relationships are common methodologies to assess performance, address risks, lower costs, and accelerate time to market for innovative and potentially life altering products. These methods are usually accompanied by engineering rationales to justify the methods appropriateness. However, engineering analyses and numerical models should be validated using experimental data when possible to quantify the accuracy of their predictions under conditions relevant to their planned use. In this work, a set of lattice design parameters are evaluated using numerical modeling and experimental methods under quasi-static tensile, compressive, and shear modalities. Regular body centered cubic (BCC) and stochastic Voronoi Tessellation Method (VTM) lattices are constructed with three different cell lengths (2.5 mm, 4.0 mm, 5.0 mm) and various strut diameter thicknesses (ranging from 0.536 mm-1.3506 mm) while maintaining the lattice's relative density (0.2 and 0.3). Some strut diameters were selected to challenge the AM process limits. Specimens were fabricated in nylon 12 on a laser powder bed fusion system. Optical microscopy showed up to a 28.6% difference between as-designed and fabricated strut diameters. Simulated reaction loads revealed up to a 4.6% difference in BCC lattices within a constant relative density at a 1.4 mm displacement boundary condition while the VTM samples had up to a 19.5% difference. Errors between the experimental and simulated lattice reaction loads were as high as 97.0%. This error magnitude appears to strongly correlate with lattice strut diameter. These results showcase that a computational estimation, even one with reasonable assumptions, may erroneously characterize the performance of these lattice structures, and that these assumptions should be challenged by experimentally evaluating and validating critical quantities of interest.

3D-printed Mg-incorporated PCL-based scaffolds: A promising approach for bone healing

3D-printed scaffolds have been developed as potential therapeutic strategies in bone tissue engineering. Mg/PCL biomaterials have been attracted much attention owing to biocompatibility, biodegradability as well as tunable mechanical properties. In this work, we developed 3D-printed customized Mg/PCL composite scaffolds with enhanced osteogenesis and biomineralization. Mg microparticles embedded in PCL-based scaffolds took a positive role in the improvement of biocompatibility, biomineralization, and biodegradable abilities. When incorporated with 3 wt% Mg, PCL-based scaffolds exhibited the optimal bone repairing ability in vitro and in vivo. The in vitro experiments indicated that 3 Mg/PCL scaffolds had improved mechanical properties, good biocompatibility, enhanced osteogenic and angiogenic activities. Besides, the in vivo studies demonstrated that Mg/PCL scaffolds promoted tissue ingrowth and new bone formation. In sum, these findings indicated that 3D-printed cell-free Mg/PCL scaffolds are promising strategies for bone healing application.

Hybrid porous zirconia scaffolds fabricated using additive manufacturing for bone tissue engineering applications

For the formation of new bone in critical-sized bone defects, bioactive scaffolds with an interconnected porous network are necessary. Herein, we fabricated three-dimensional (3D) porous hybrid zirconia scaffolds to promote hybrid functionality, i.e., excellent mechanical properties and bioactive performance. Specifically, the 3D printed scaffolds were subjected to Zn-HA/glass composite coating on glass-infiltrated zirconia (ZC). In addition, to pertain the extracellular matrix of bone, biopolymer (alginate/gelatine) was embedded in a developed 3D construct (ZB and ZCB). A zirconia-printed scaffold (Z) group served as a control. The structural and mechanical properties of the constructed scaffolds were studied using essential characterization techniques. Furthermore, the biological performance of the designed scaffolds was tested by a sequence of in vitro cell tests, including the attachment, proliferation, and osteogenic differentiation of dental pulp cells (DPCs). The ZC and ZCB scaffolds exhibited 20% higher compression strength than the zirconia (Z) scaffolds. More importantly, the ZC constructs exhibited superior cell-adhesion, distribution, and osteogenic differentiation ability due to the synergistic effects of the composite coating. In addition, the biopolymer-embedded scaffolds (ZB, ZCB) showed an excellent biological and mechanical performance. Thus, our results suggest that the Zn-HA/glass composite-coated glass-infiltrated zirconia (ZC, ZCB) scaffolds are a dynamic approach to designing bioactive 3D scaffolds for the load-bearing bone regeneration applications.

Efficacy of eluted antibiotics through 3D printed femoral implants

Costs associated with musculoskeletal diseases in the United States account for 5.7% of the Gross Domestic Product (GDP) (Weinstein et al. 2018). As such, there is a need to pursue new ideas in orthopaedic implants that can decrease cost and improve patient care. In the recent years, 3D printing of polymers using Fused Deposition Modeling (FDM) and metals using Direct Metal Laser Sintering (DMLS) has opened several exciting possibilities to create customized orthopaedic implants. Such implants can be engineered to release antibiotics in a controlled manner by infusing the drug into the material during manufacturing stage. However, the prevalence of high temperature could impact the anti-bacterial effectiveness of the eluted antibiotics in such implants. An alternative approach to circumvent this issue would be to modify the implant geometry to incorporate built-in design features such as micro-channels and reservoirs in which antibiotics can be introduced prior to the surgical procedure. Irrespective of the approach used, the ability of 3D printed orthopaedic implants to elute antibiotics, and the rate of elution are not well understood. The purpose of this article is to study the elution of doxycycline through 3D printed femoral implants using three different materials: Poly-Lactic Acid (PLA), Poly-Caprolactone (PCL) and Titanium grade Ti-6Al-4V. The PLA and Ti-6Al-4V implants were designed with built-in reservoirs and micro-channels in which doxycycline was introduced post the manufacturing stage. However, the PCL implants were printed from a PCL spool that was infused with doxycycline using an extruder. The PLA and Ti-6Al-4V experiments were run for a period of 31 days and the PCL experiment for one day. The antibacterial ability of eluted doxycycline from all implants were examined using Kirby-Bauer test on the bacteria E.coli k-12. The results show that most of doxycycline eluted through the three materials in the first 24 hours. After the initial spike, a steady release was achieved for the PLA and Ti-6Al-4V implants for 30 days. During this timeframe, Ti-6Al-4V implants released more doxycycline than the PLA implant. The eluted antibiotics through all the implants demonstrated the ability to kill bacteria in the subsequent Kirby-Bauer test. These outcomes show that irrespective of how the antibiotics were introduced, 3D printed polymeric and metallic implants have great potential in orthopaedic applications.

Sinapic acid-loaded chitosan nanoparticles in polycaprolactone electrospun fibers for bone regeneration in vitro and in vivo

Sinapic acid (SA) is a plant-derived phenolic compound known for its multiple biological properties, but its role in the promotion of bone formation is not yet well-studied. Moreover, the delivery of SA is hindered by its complex hydrophobic nature, limiting its bioavailability. In this study, we fabricated a drug delivery system using chitosan nanoparticles (nCS) loaded with SA at different concentrations. These were incorporated into polycaprolactone (PCL) fibers via an electrospinning method. nCS loaded with 50 μM SA in PCL fibers promoted osteoblast differentiation. Furthermore, SA treatment activated the osteogenesis signaling pathways in mouse mesenchymal stem cells. A critical-sized rat calvarial bone defect model system identified that the inclusion of SA into PCL/nCS fibers accelerated bone formation. Collectively, these data suggest that SA promoted osteoblast differentiation in vitro and bone formation in vivo, possibly by activating the TGF-β1/BMP/Smads/Runx2 signaling pathways, suggesting SA might have therapeutic benefits in bone regeneration.

Advances in additive manufacturing for bone tissue engineering scaffolds

This article reviews the current state of the art of additive manufacturing techniques for the production of bone tissue engineering (BTE) scaffolds. The most well-known of these techniques include: stereolithography, selective laser sintering, fused deposition modelling and three-dimensional printing. This review analyses in detail the basic physical principles and main applications of these techniques and presents a list of biomaterials for BTE applications, including commercial trademarks. It also describes and compares the main advantages and disadvantages and explains the highlights of each additive manufacturing technique and their evolution. Finally, is discusses both their capabilities and limitations and proposes potential strategies to improve this field.

Study of potential biomedical application of sol-gel derived Zn-doped SiO2-hydroxypropyl cellulose nanohybrids

A series of Zn-doped hybrid materials based on silica from tetraethoxysilane (TEOS) and hydroxypropyl cellulose (HPC) were prepared by a sol-gel route. The structure, morphology and thermal behavior of synthesized hybrids were characterized by infrared (IR) spectroscopy, ultraviolet-visible spectroscopy (UV-Vis), transmission electron microscopy (TEM) and differential thermal analysis with thermogravimetric analysis (DTA/TG). The obtained materials were investigated for a potential biomedical application. The antibacterial properties of hybrids were investigated by measuring the inhibition zones formed around the materials containing different zinc content in presence of reference strains of Gram-positive and Gram-negative bacteria. The biocompatibility tests showed no cytotoxicity and genotoxicity, as well as no changes in actin cytoskeleton organization for hybrids with Zn content below 5 wt%.

3D-Printed Bioactive Calcium Silicate/Poly-ε-Caprolactone Bioscaffolds Modified with Biomimetic Extracellular Matrices for Bone Regeneration

Currently, clinically available orthopedic implants are extremely biocompatible but they lack specific biological characteristics that allow for further interaction with surrounding tissues. The extracellular matrix (ECM)-coated scaffolds have received considerable interest for bone regeneration due to their ability in upregulating regenerative cellular behaviors. This study delves into the designing and fabrication of three-dimensional (3D)-printed scaffolds that were made out of calcium silicate (CS), polycaprolactone (PCL), and decellularized ECM (dECM) from MG63 cells, generating a promising bone tissue engineering strategy that revolves around the concept of enhancing osteogenesis by creating an osteoinductive microenvironment with osteogenesis-promoting dECM. We cultured MG63 on scaffolds to obtain a dECM-coated CS/PCL scaffold and further studied the biological performance of the dECM hybrid scaffolds. The results indicated that the dECM-coated CS/PCL scaffolds exhibited excellent biocompatibility and effectively enhanced cellular adhesion, proliferation, and differentiation of human Wharton's Jelly mesenchymal stem cells by increasing the expression of osteogenic-related genes. They also presented anti-inflammatory characteristics by showing a decrease in the expression of tumor necrosis factor-alpha (TNF-α) and interleukin-1 (IL-1). Histological analysis of in vivo experiments presented excellent bone regenerative capabilities of the dECM-coated scaffold. Overall, our work presented a promising technique for producing bioscaffolds that can augment bone tissue regeneration in numerous aspects.

Metal Posts and the Effect of Material–Shape Combination on the Mechanical Behavior of Endodontically Treated Anterior Teeth

The control of the process–structure–property relationship of a material plays an important role in the design of biomedical metal devices featuring desired properties. In the field of endodontics, several post-core systems have been considered, which include a wide range of industrially developed posts. Endodontists generally use posts characterized by different materials, sizes, and shapes. Computer-aided design (CAD) and finite element (FE) analysis were taken into account to provide further insight into the effect of the material–shape combination of metal posts on the mechanical behavior of endodontically treated anterior teeth. In particular, theoretical designs of metal posts with two different shapes (conical-tapered and conical-cylindrical) and consisting of materials with Young’s moduli of 110 GPa and 200 GPa were proposed. A load of 100 N was applied on the palatal surface of the crown at 45° to the longitudinal axis of the tooth. Linear static analyses were performed with a non-failure condition. The results suggested the possibility to tailor the stress distribution along the metal posts and at the interface between the post and the surrounding structures, benefiting from an appropriate combination of a CAD-based approach and material selection. The obtained results could help to design metal posts that minimize stress concentrations.

Fabrication and biocompatibility of agarose acetate nanofibrous membrane by electrospinning

In the present paper, agarose acetate (AGA) nanofibrous membranes containing different weight percentages of β-tricalcium phosphate (β-TCP) were successfully developed through electrospinning. The fibers in the nanofibrous membranes had a rough surface due to the β-TCP particles which were uniformly dispersed within or on the surface of AGA fibers. Rat-bone marrow-derived mesenchymal stem cells (rBMSCs) were cultured on the AGA based nanofibrous membranes while showed a good adhesion and proliferation. It was found that more rBMSCs were differentiated to osteoblast-like cells on the β-TCP containing nanofibrous membranes compared with the single AGA membrane, and more alkaline phosphatase (ALP) and mineralized matrix could be detected when rBMSCs were cultured on the β-TCP containing nanofibrous membranes. The nanofibrous membranes were implanted into Sprague-Dawley (SD) rats for biocompatibility test. Gross examination and histological analysis of the AGA based nanofibrous membranes results showed that there was less inflammatory response. All of experimental results suggested that the AGA based nanofibrous membranes had the great potential application in bone tissue engineering.

Theoretical Design of Multilayer Dental Posts Using CAD-Based Approach and Sol-Gel Chemistry

A computer-aided design (CAD)-based approach and sol-gel chemistry were used to design a multilayer dental post with a compositional gradient and a Young’s modulus varying from 12.4 to 2.3 GPa in the coronal-apical direction. Specifically, we propose a theoretical multilayer post design, consisting of titanium dioxide (TiO₂) and TiO₂/poly(ε-caprolactone) (PCL) hybrid materials containing PCL up to 24% by weight obtained using the sol-gel method. The current study aimed to analyze the effect of the designed multilayer dental post in endodontically treated anterior teeth. Stress distribution was investigated along and between the post and the surrounding structures. In comparison to a metal post, the most uniform distributions with lower stress values and no significant stress concentration were found when using the multilayer post.

FE analysis of conceptual hybrid composite endodontic post designs in anterior teeth

OBJECTIVES

To assess conceptual designs of dental posts consisting of polyetherimide (PEI) reinforced with carbon (C) and glass (G) glass fibers in endodontically treated anterior teeth.

METHODS

3D tessellated CAD and geometric models of endodontically treated anterior teeth were generated from Micro-CT scan images. Model C-G/PEI composite posts with different Young's moduli were analyzed by Finite Element (FE) methods post A (57.7GPa), post B (31.6GPa), post C (from 57.7 to 9.0GPa in the coronal-apical direction). A load of 50N was applied at 45° to the longitudinal axis of the tooth, acting on the palatal surface of the crown. The maximum principal stress distribution was determined along the post and at the interface between the post and the surrounding structure.

RESULTS

Post C, with Young's modulus decreasing from 57.7 to 9.0GPa in the coronal-apical direction, reduced the maximum principal stress distribution in the restored tooth. Post C gave reduced stress and the most uniform stress distribution with no stress concentration, compared to the other C-G/PEI composite posts.

SIGNIFICANCE

The FE analysis confirmed the ability of the functionally graded post to dissipate stress from the coronal to the apical end. Hence actual (physical) C-G/PEI posts could permit optimization of stress distributions in endodontically treated anterior teeth.

Integrated Oxidized-Hyaluronic Acid/Collagen Hydrogel with β-TCP Using Proanthocyanidins as a Crosslinker for Drug Delivery

The susceptibility of guided bone regeneration (GBR) material to infection by pathogens at wound sites during bone healing has often been overlooked. The objective of this study was the synthesis and characterization of a potential material for antibacterial GBR application. In the current study, the mechanical strength and biocompatibility of a composite restoration material-made of oxidized hyaluronic acid (HA)/type I collagen hydrogel integrated with tricalcium phosphate (β-TCP) using a natural crosslinking agent, oligomeric proanthocyanidins (OPCs)-were evaluated. The suitability of the material as a carrier matrix for antibacterial applications was evaluated by following the drug-release profile of tetracycline loaded within the composite. Results indicated that this composite material had a high swelling ratio of 420% and mechanical strength of 25 kPa while remaining at more than 60% of the weight after 30 days of an in vitro degradation test with good biocompatibility in promoting the proliferation of MG-63 cells. Drug release studies further showed that 93% of the tetracycline was released after 5 days, which supports this GBR material's capability to release antibacterial drugs while keeping other required GBR material design functions.

Effects of sol–gel process parameters on the anticorrosive performance of phosphosilicate hybrid coatings for carbon steel: structural and electrochemical studies

The effects of several sol–gel process parameters such as acid catalyst addition and the heat treatment procedure on porosity and anticorrosive properties were investigated for phosphosilicate sol–gel hybrid coatings prepared from 3-[(methacryloyloxy)propyl] trimethoxysilane (MEMO) and bis-[2-(methacryloyloxy)ethyl] phosphate (BMEP).