A Reversible Bis(Salamo)-Based Fluorescence Sensor for Selective Detection of Cd2+ in Water-Containing Systems and Food Samples

The new role of dipyrromethene chemosensor for absorbance-ratiometic and fluorescence "turn-on" sensing Zn2+ ions in water-organic solutions and real water samples

This study presents a dipyrromethene-based sensitive and selective probe for Zn2+ ions detection in aqueous and water-organic media. The probe demonstrates absorbance-ratiometric and "off-on" fluorescent sensing for Zn2+ in a DMSO/H2O (9:1, v/v) mixture. The 3,3',4,4',5,5'-hexamethyl-2,2'-dipyrromethene (HL), similar to its analogs, exhibits weak fluorescence (with a quantum yield of less than 0.001). However, upon the presence of Zn2+ ions in the sensor HL solution, there is a remarkable increase (up to 200-fold) in fluorescence intensity due to the formation of a stable intramolecular chelate complex [ZnL2]. This complex formation induces a significant hyperchromic effect and a red shift (57 nm) in the characteristic absorption bands. The sensing mechanism of the probe towards Zn2+ ions was thoroughly investigated through absorbance and fluorescent titrations, molar ratio plots, 1H NMR, and DFT/TDDFT studies. The fluorescence response exhibited a strong linear relationship with Zn2+ concentration within the range of 0 to 5.7 × 10-6 mol/L. The detection limit (LOD) and limit of quantitation (LoQ) for Zn2+ were determined as 2 × 10-8 mol/L and 6.6 × 10-8 mol/L, respectively. Moreover, the probe demonstrated high selectivity for Zn2+ ions over other metal ions (Na+, Mg2+, Al3+, Cr3+, Mn2+, Fe3+, Co2+, Ni2+, Cu2+, Pd2+, Cd2+, Hg2+, Pb2+). Test systems in the form of test-strips and cotton-pads were developed based on the dipyrromethene sensor for rapid "naked-eye" detection of zinc ions in water. The sensor was successfully applied for detecting Zn2+ ions in real water samples.

Electrochemical Devices to Monitor Ionic Analytes for Healthcare and Industrial Applications

Recent advances in electrochemical devices have sparked exciting opportunities in the healthcare, environment, and food industries. These devices can be fabricated at low costs and are capable of multiplex monitoring. This overcomes challenges presnted in traditional sensors for biomolecules and provides us a unique gateway toward comprehensive analyses. The advantages of electrochemical sensors are derived from their direct integration with electronics and their high selectivity along with sensitivity to sense a wide range of ionic analytes at an economical cost. This review paper aims to summarize recent innovations of a wide variety of electrochemical sensors for ionic analytes for health care and industrial applications. Many of these ionic analytes are important biomarkers to target for new diagnostic tools for medicine, food quality monitoring, and pollution detection. In this paper, we will examine various fabrication techniques, sensing mechanisms, and will also discuss various future opportunities in this research direction.

2,6-bis(E)-4-methylbenzylidine)-cyclohexan-1-one as a Fluorescent-on Sensor for Ultra Selective Detection of Chromium Ion in Aqueous Media

The ligand 2,6-bis(E)-4-methylbenzylidine)-cyclohexan-1-one sensor has been synthesized as a fluorescence-on sensor/probe for the trace level detection of chromium III ion. The synthesized ligand was characterized by FTIR, ¹H-NMR spectroscopy, and fluorimetery. The sensor exhibited an ultra-selective response to chromium among the tested heavy metal ions. Different parameters were optimized like pH, effect of concentration of sensor C, metal ion and contact time. The binding stoichiometry of C:Cr³⁺ was calculated to be 2:1 (Job's plot) with a significantly low detection limit of 2.3 × 10^{- 9} M. Sensor C were practically employed for detection of chromium in spiked water samples.

Recent progress in cadmium fluorescent and colorimetric probes

Cadmium is a heavy metal which exists widely in industrial and agricultural production and can induce a variety of diseases in organisms. Therefore, its detection is of great significance in the fields of biology, environment and medicine. Fluorescent probe has been a powerful tool for cadmium detection because of its convenience, sensitivity, and bioimaging capability. In this paper, we reviewed 98 literatures on cadmium fluorescent sensors reported from 2017 to 2021, classified them according to different fluorophores, elaborated the probe design, application characteristics and recognition mode, summarized and prospected the development of cadmium fluorescent and colorimetric probes. We hope to provide some help for researchers to design cadmium fluorescent probes with higher selectivity, sensitivity and practicability.

Cadmium is a heavy metal which exists widely in industrial and agricultural production and can induce a variety of diseases in organisms.

A newly synthesized visual bis(salamo)-based fluorescent chemosensor for exogenous detection of B4O72- in living cells and zebrafish

A newly synthesized fluorescent chemosensor H₆L was explored for detecting B₄O₇^2-, characterized by ¹H NMR spectrum, mass spectrum and fluorescence spectra. During the detection process of B₄O₇^2-, the fluorescence is significantly enhanced and naked eye recognition can be performed under 365 nm UV light without any interference by other typical anions. The limit of detection is as low as 6.97 × 10^-10 M. In addition, in order to broaden the application of salamo-based fluorescence sensors in the field of biology, except for the fluorescence imaging of HeLa cells, the first attempt of exogenous detection in zebrafish was conducted successfully.

A Highly Selective Turn-on Fluorescent and Naked-eye Colourimetric Dual-channel Probe for Cyanide Anions Detection in Water Samples

A highly selective turn-on fluorescent and naked-eye colourimetric dual-channel probe for cyanide anions (CN-) has been designed and characterized. In the mixed solution (DMSO / H₂O, 9:1, v / v), only CN- could cause an increase in the UV absorption intensity and the corresponding fluorescence intensity increased, and other anions had no significant effect on the probe. After treatment with cyanide in the probe solution, the solution showed a noticeable colour change, from light yellow to purple. Moreover, a fluorescence spectrophotometer can be used to observe that the fluorescence intensity of the solution is significantly enhanced. The response of the colourimetric and fluorescent dual-channel probe to CN- was attributed to nucleophilic addition, and the mechanism was determined by ¹H NMR spectroscopy. In addition, this probe was used to detect CN- in actual water samples, including river water, drinking water, and tap water. The spiked CN- recovery rate is very high (97.2%-100.06%), and analytical precision is also very high (RSD < 2%), which shows its feasibility and reliability for detecting cyanide ions in actual water samples.

A novel turn-on fluorogenic aldehyde-appended salamo-like copper(ii) complex probe for the simultaneous detection of S2O32− and GSH

A novel salamo-like copper(ii) complex probe (ASC) behaves as a two-pronged sensor of S₂O₃²⁻ ions and GSH by a ‘turn-on’ fluorescence mechanism.

Synthesis and characterization for a highly selective bis(salamo)-based chemical sensor and imaging in living cell

A new sensor H₅L for continuous identification of Cu²⁺, Al³⁺ and lysine was synthesized by Schiff base reactions. The sensor could specifically recognized Cu²⁺ in the EtOH/H₂O (1:1 v/v) solution by UV-vis spectra, and the binding constant with Cu²⁺ can reach 10¹¹ M^-1, meanwhile, it was found by the naked-eye that the color of the solution was changed from colorless to yellow. The copper complex L-Cu²⁺ formed by the sensor H₅L and Cu²⁺ could further recognize Al³⁺ and lysine in the fluorescence spectra. The LOD values of the three objects were 2.67 × 10^-8, 1.96 × 10^-8 and 5.59 × 10^-9 M, respectively. In addition, fluorescence intracellular images of Al³⁺ and lysine were performed and obtained satisfactory results.

Highly efficient detection of Cu2+ and B4 O7 2- based on a recyclable asymmetric salamo-based probe in aqueous medium

An asymmetric salamo-based probe molecule (H₂ L) was synthesized and characterized structurally. When DMF/H₂ O (9:1) was used as the solvent, it was shown probe H₂ L has high sensitivity to Cu²⁺ . Using high-resolution mass spectrometry and theoretical calculation, it was found that probe H₂ L could form a more stable complex (1:1) with Cu²⁺ , the minimum limit of detection (LOD) of H₂ L for Cu²⁺ was calculated as 9.95 × 10^-8 M. In addition, probe H₂ L could also be used to identify B₄ O₇ ^2- under the same detection conditions and the minimum LOD of H₂ L for B₄ O₇ ^2- was calculated as 4.98 × 10^-7 M. At the same time, density functional theory theoretical calculation further proved the flexibility of probe H₂ L. Through the action of EDTA, probe H₂ L had a cyclic ability to recognize Cu²⁺ , and showed a better response in the physiological pH range; probe H₂ L had the characteristics of fast recognition speed and high efficiency. In addition, with probe H₂ L test paper for Cu²⁺ and B₄ O₇ ^2- , the effect was more obvious. Meanwhile, probe H₂ L can be used to quantitatively detect Cu²⁺ in water samples.

An Unsymmetric Salamo-like Chemosensor for Fuorescent Recognition of Zn2+

A new unsymmetric tetradentate salamo-like chemical sensor H₂L for fluorescent recognition of Zn²⁺ has been designed and synthesized. The sensor can recognize Zn²⁺ from other metal ions examined with selectivity, anti-interference, reliability and high sensitivity (LOD = 1.89 × 10^-6 M) in ethanol/H₂O solution. The results of UV-Vis and fluorescent spectra analyses, X-ray crystallographic study and DMol³ simulation and calculation (on Materials Studio) indicate that the chelation-enhanced fluorescence (CHEF) recognition mechanism of the sensor H₂L for Zn²⁺ is of its hindered PET process. The sensor H₂L for Zn²⁺ has excellent fluorescence characteristics and has potential application value in biological and environmental systems.

Colorimetric cadmium ion detection in aqueous solutions by newly synthesized Schiff bases

Two newly synthesized Schiff bases DMCA and DMBA were used for selective detection of Cd²⁺ over a wide range of other metal ions in acetonitrile (ACN)/ Tris-HCl buffer (10 mM, pH 7.32, v/v 2:1). The sensors can detect Cd²⁺ ions by colour changes from colourless to orange for DMBA and yellow to reddish for DMCA. Response of the probes towards metal ions was investigated by using UV-vis spectroscopy. The complex stoichiometry between the sensors, DMBA and DMCA, and Cd²⁺ was found to be 2:1 and the binding constants were calculated to be 2.65 ×10¹² M^-2 and 4.95 ×10¹² M^-2, respectively. The absorbance-based detection limits of DMBA and DMCA were calculated as 0.438 μM and 0.102 μM, respectively. The sensors were also successfully applied to real samples.

A highly sensitive and selective bis(salamo)-type fluorescent chemosensor for identification of Cu2+ and the continuous recognition of S2-, Arginine and Lysine

A novel bis(salamo)-type chemosensor H₃L was synthesized and characterized. It was found that the sensor molecule can selectively recognize Cu²⁺, and its L-Cu²⁺ is highly sensitive to the detection of S^2- anion, Arginine and Lysine when dissolved in ethanol solvent. The sensor H₃L can be used to identify a relay sensor for Cu²⁺, while the L-Cu²⁺ recognizes S^2- anion, Arginine and Lysine with high selectivity and sensitivity over an acceptable physiological pH range. The detection line of the sensor molecule H₃L is 1.02 × 10^-6 M, and its binding constant to Cu²⁺ is 1.54 × 10⁶ M^-1. The detection line of L-Cu²⁺ as a sensor is calculated as 5.57 × 10^-7 M, and its binding constants with S^2- anion, Arginine and Lysine are 2.80 × 10⁵ M^-1, 5.32 × 10⁶ M^-1 and 5.94 × 10⁶ M^-1, respectively. The crystal structure of the Cu(II) complex [Cu₄(L)₂(CH₃OH)₂]·2NO₃ with the sensor molecule H₃L has been determined by single crystal X-ray crystallography.

Two highly sensitive and efficient salamo-like copper(II) complex probes for recognition of CN. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2020;228:117775. [PMID: 31718968 DOI: 10.1016/j.saa.2019.117775]

Two salamo-like copper(II) complex probes, L¹-Cu²⁺ and L²-Cu²⁺, were designed and synthesized for sensitive and efficient identification of CN^-. UV spectroscopy, high resolution mass spectrometry, RGB analysis and naked eye recognition were performed to explore their recognition mechanisms. High resolution mass spectra indicated that the probes L¹-Cu²⁺ and L²-Cu²⁺ formed complexes with CN^-. The two probes could recognize CN^- by the naked eye and the color of the solution changed from light yellow to red. In terms of application, the contents of CN^- in the environmental water samples were tested. In addition, the optimal pH ranges for probe detection of CN^- were investigated by pH value measurement.

A high-efficiency salamo-based copper(ii) complex double-channel fluorescent probe

In this paper, a salamo-based copper(ii) complex probe L-Cu2+ was synthesized, which combined with copper(ii) ions to form L-Cu2+ for the detection of S2- and had a good fluorescence chemical response. Through spectral analysis, we found that S2- could be identified with high sensitivity and selectivity in the presence of various anions and could be used for the detection of S2- by the naked eye. With the addition of S2-, the solution color changed from colorless to bright yellow. UV absorption, fluorescence and other characterization methods were carried out, and the mechanism of action was determined. In addition, we performed a visual inspection of H2S gas, and the probe L-Cu2+ could detect S2- in the gas molecules, revealing its potential application value in biology and medicine.

Unprecedented Dinuclear CuII N,O-Donor Complex: Synthesis, Structural Characterization, Fluorescence Property, and Hirshfeld Analysis

An unprecedented dinuclear CuII complex, [Cu2(L2)2], derived from a salamo-like chelating ligand H2L2, was produced by the cleavage of a newly synthesized, half-salamo-like ligand HL1 (2-[O-(1-ethyloxyamide)]oxime-3,5-dichloro-phenol). This was synthesized and characterized by elemental analyses, IR, UV–Vis and fluorescent spectra, single crystal X-ray diffraction analysis, and Hirshfeld surface analysis. X-ray crystallographic analysis indicated that the two CuII (Cu1 and Cu2) ions bore different (N2O3 and N2O2) coordination environments, the penta-coordinated Cu1 ion possessed a slightly twisted tetragonal pyramid geometry with the τ value τ = 0.004, and the tetra-coordinated Cu2 ion showed a slightly twisted square planar geometry. Interestingly, one oxime oxygen atom participated in the coordination reported previously. Moreover, an infinite two-dimensional layered supramolecular network was formed. Compared with HL1, the CuII complex possessed the characteristic of fluorescence quenching.

Fluorescence Properties and Density Functional Theory Calculation of a Structurally Characterized Heterotetranuclear [ZnII2–SmIII2] 4,4′-Bipy-Salamo-Constructed Complex

A new heterotetranuclear complex, [{Zn(L)Sm(NO3)3}2(4,4′-bipy)]·2CH3OH, was synthesized via an unsymmetrical single salamo-like ligand H2L: 6-methoxy-6′-ethoxy-2,2′-[ethylenedioxybis(azinomethyl)]diphenol, with Zn(OAc)2·2H2O, Sm(NO3)3·6H2O, and 4,4′-bipyridine by the one-pot method. The [ZnII2–SmIII2] complex was validated via elemental analysis, powder X-ray diffraction (PXRD) analysis, infrared spectroscopy, and ultraviolet–visible (UV–Vis) absorption spectroscopy. The X-ray single crystal diffraction analysis of the [ZnII2–SmIII2] complex was carried out via X-ray single-crystal crystallography. The crystal structure and supramolecular features were discussed. In addition, while studying the fluorescence properties of the [ZnII2–SmIII2] complex, the density functional theory (DFT) calculation of its structure was also performed.

A Newly Synthesized Heterobimetallic NiII-GdIII Salamo-BDC-Based Coordination Polymer: Structural Characterization, DFT Calculation, Fluorescent and Antibacterial Properties

A unprecedented hetero-bimetallic 3d-4f BDC-salamo-based coordination polymer, [(L)Ni(BDC)Gd(NO3)(DMF)] was prepared and validated via elemental analyses, IR and UV–Visible absorption spectra, DFT calculation, and X-ray crystallography. The six-coordinated Ni1 ion lies at the N2O2 donor site of the L2− moiety, and one DMF O atom and carboxylate O atom occupy, collectively, the axial positions, and form a twisted octahedron. The nine-coordinated Gd1 ion consists of three oxygen atoms (O12, O13, and O14) of two carboxylate groups, two oxygen atoms (O8 and O9) derived from one bidentate nitrate group, and an O2O2 coordination site (O1, O2, O6, and O5) of the L2− unit, forming a twisted three-capped triangular prism coordination geometry. Compared to the ligand (H2L), the fluorescence intensity decreases due to the coordination of metal ions. Meanwhile, the antibacterial activities are researched.

Four rare structurally characterized hetero-pentanuclear [Zn4Ln] bis(salamo)-type complexes: syntheses, crystal structures and spectroscopic properties

Four new hetero-pentanuclear 3d–4f complexes [Zn₄(L)₂La(NO₃)₂(OEt)(H₂O)] (1), [Zn₄(L)₂Ce(NO₃)₂(OMe)(MeOH)] (2), [Zn₄(L)₂Pr(NO₃)₂(OEt)(EtOH)] (3) and [Zn₄(L)₂Nd(NO₃)₂(OMe)(MeOH)] (4) were synthesized by the reactions of a newly synthesized octadentate bis(salamo)-based tetraoxime ligand (H₄L) with Zn(OAc)₂·2H₂O and Ln(NO₃)₃·6H₂O (Ln = La, Ce, Pr and Nd), respectively, and characterized via elemental analyses, FT-IR, UV-Vis spectroscopy and single crystal X-ray crystallography. The X-ray crystallographic investigation revealed that all Zn^II ions were located in N₂O₃ coordination spheres, and possessed a trigonal bipyramid coordination environment. The Ln^III ion lay in an O₈ coordination sphere, and adopted a distorted square antiprismatic coordination environment. Furthermore, supramolecular interactions and fluorescence properties were investigated.

Four new hetero-pentanuclear 3d–4f complexes 1–4 were synthesized and characterized. Supramolecular interactions and fluorescence properties of complexes 1–4 were investigated.

A highly sensitive and selective fluorescent "off-on-off" relay chemosensor based on a new bis(salamo)-type tetraoxime for detecting Zn2+ and CN. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2019;222:117209. [PMID: 31200268 DOI: 10.1016/j.saa.2019.117209]

A new naphthalenediol-based bis(salamo)-type fluorescent probe H₄L for Zn²⁺ and CN^- was reported. Probe H₄L showed a highly selective fluorescence enhancement toward Zn²⁺ over other metal ions including Cd²⁺, and obtained the L-Zn²⁺complex can only detect CN^- in various anions. Their recognition mechanisms were explained by Job plots, fluorescent and UV-vis titrations, and theoretical calculations. The L-Zn²⁺complex has been synthesized and structurally characterized using Hirshfeld surface analysis, elemental analyses, IR, UV-Vis and fluorescent spectra. Additionally, the relay probe with the wide adaptability of pH range and excellent stability showed highly selectivity for CN^- recognition.

An Unexpected Trinuclear Cobalt(II) Complex Based on a Half-Salamo-Like Ligand: Synthesis, Crystal Structure, Hirshfeld Surface Analysis, Antimicrobial and Fluorescent Properties

An unexpected trinuclear Co(II) complex, [Co3(L2)2(μ-OAc)2(CH3OH)2]·2CH3OH (H2L2 = 4,4′-dibromo-2,2′-[ethylenedioxybis(nitrilomethylidyne)]diphenol) constructed from a half-Salamo-based ligand (HL1 = 2-[O-(1-ethyloxyamide)]oxime-4-bromophenol) and Co(OAc)2·4H2O, has been synthesized and characterized by elemental analyses, infrared spectra (IR), UV-Vis spectra, X-ray crystallography and Hirshfeld surface analysis. The Co(II) complex contains three Co(II) atoms, two completely deprotonated (L2)2− units, two bridged acetate molecules, two coordinated methanol molecules and two crystalline methanol molecules, and finally, a three-dimensional supramolecular structure with infinite extension was formed. Interestingly, during the formation of the Co(II) complex, the ligand changed from half-Salamo-like to a symmetrical single Salamo-like ligand due to the bonding interactions of the molecules. In addition, the antimicrobial activities of HL1 and its Co(II) complex were also investigated.

Crystal structure of 1-(4-{2,5-dichloro-3-hydroxy-4-[4-(1-methoxyimino-ethyl)-phenylamino]-6-methyl-phenylamino}-phenyl)-ethanone O-methyl-oxime, C24H22Cl2N4O4

C24H22Cl2N4O4, triclinic, P1̄ (no. 2), a = 9.7533(6) Å, b = 10.2969(8) Å, c = 17.9128(12) Å, α = 104.131(2)°, β = 99.242(2)°, γ = 91.106(2)°, V = 1718.7(2) Å3, Z = 3, R gt(F) = 0.0502, wR ref(F 2) = 0.1256, T = 153(2) K.

A New Half-Salamo-Based Homo-Trinuclear Nickel(II) Complex: Crystal Structure, Hirshfeld Surface Analysis, and Fluorescence Properties

A new homo-trinuclear Ni(II) half-salamo-based complex [Ni3(L)2(μ-OAc)2(OAc)2(CH3OH)2]·2CH3OH was synthesized via the reaction of a tridentate ligand HL (2-[O-(1-ethyloxyamide)]oxime-4-bromophenol) and Ni(OAc)2·4H2O, and characterized using elemental analyses, IR spectra, UV-Vis absorption spectra, X-ray crystallography, and Hirshfeld analysis. Interestingly, single-crystal X-ray analysis showed that the two acetate molecules were bonded simultaneously with the Ni(II) atoms by mono-dentate chelating and bidentate bridging coordination modes, respectively, and the resulting hexa-coordinate geometries were ultimately formed. Furthermore, the Hirshfeld analysis of the complex was studied. Compared with HL, the complex fluorescence intensity was significantly lowered, indicating that the Ni(II) ions have fluorescence quenching characteristics.

Structurally characterized homo-trinuclear ZnII and hetero-pentanuclear [ZnII4LnIII] complexes constructed from an octadentate bis(Salamo)-based ligand: Hirshfeld surfaces, fluorescence and catalytic properties

One 3d and five 3d-4f complexes were synthesized. Complexes 1–6 were characterized via elemental analyses, FT-IR, UV-Vis spectroscopy and X-ray crystallography, and their fluorescence properties, catalytic activities and Hirshfeld surface analyses were studied.

Synthesis and Fluorescence Properties of Structurally Characterized Heterobimetalic Cu(II)⁻Na(I) Bis(salamo)-Based Complex Bearing Square Planar, Square Pyramid and Triangular Prism Geometries of Metal Centers

A novel heterotrinuclear complex [Cu₂(L)Na(µ-NO₃)]∙CH₃OH∙CHCl₃ derived from a symmetric bis(salamo)-type tetraoxime H₄L having a naphthalenediol unit, was prepared and structurally characterized via means of elemental analyses, UV-Vis, FT-IR, fluorescent spectra and single-crystal X-ray diffraction. The heterobimetallic Cu(II)–Na(I) complex was acquired via the reaction of H₄L with 2 equivalents of Cu(NO₃)₂·2H₂O and 1 equivalent of NaOAc. Clearly, the heterotrinuclear Cu(II)–Na(I) complex has a 1:2:1 ligand-to-metal (Cu(II) and Na(I)) ratio. X-ray diffraction results exhibited the different geometric behaviors of the Na(I) and Cu(II) atoms in the heterotrinuclear complex; the both Cu(II) atoms are sited in the N₂O₂ coordination environments of fully deprotonated (L)⁴⁻ unit. One Cu(II) atom (Cu1) is five-coordinated and possesses a geometry of slightly distorted square pyramid, while another Cu(II) atom (Cu2) is four-coordination possessing a square planar coordination geometry. Moreover, the Na(I) atom is in the O₆ cavity and adopts seven-coordination with a geometry of slightly distorted single triangular prism. In addition, there are abundant supramolecular interactions in the Cu(II)–Na(I) complex. The fluorescence spectra showed the Cu(II)–Na(I) complex possesses a significant fluorescent quenching and exhibited a hypsochromic-shift compared with the ligand H₄L.

Synthesis and Fluorescence Properties of a New Heterotrinuclear Co(II)-Ce(III)Complex Constructed from a bis(salamo)-Type Tetraoxime Ligand

[Co₂(L)Ce(OAc)₃(CH₃CH₂OH)]·1.5CH₃OH∙0.5CH₂Cl₂, a heterotrinuclear Co(II)-Ce(III) bis(salamo)-type complex with a symmetric bi(salamo)-type ligand H₄L and an acyclic naphthalenediol moiety, was designed, synthesized and characterized by elemental analyses, FT-IR, UV-Vis and fluorescence spectroscopy and X-ray crystallography. The X-ray crystallographic investigation revealed the heterotrinuclear complex consisted of two Co(II) atoms, one Ce(III) atom, one (L)^4‒ unit, three μ₂-acetate ions, one coordinated ethanol molecule, one and half crystallization methanol molecule and half crystallization dichloromethane molecule. Two Co(II) atoms located in the N₂O₂ coordination spheres, are both hexacoordinated, with slightly distorted octahedral geometries. The Ce(III) atom is nine-coordinated and located in the O₆ cavity possesses a single square antiprismatic geometry. In addition, supramolecular interactions exist in the Co(II)-Ce(III) complex. Two infinite 2D supramolecular structures are built via intermolecular O-H···O, C-H···O and C-H···π interactions, respectively.