Facile Synthesis and Characterization of Ag₃PO₄ Microparticles for Degradation of Organic Dyestuffs under White-Light Light-Emitting-Diode Irradiation

Magnetic CoFe1.95Y0.05O4-Decorated Ag3PO4 as Superior and Recyclable Photocatalyst for Dye Degradation

The Ag₃PO₄/CoFe_1.95Y_0.05O₄ nanocomposite with magnetic properties was simply synthesized by the hydrothermal method. The structure and morphology of the prepared material were characterized, and its photocatalytic activity for degradation of the methylene blue and rhodamine B dyes was also tested. It was revealed that the Ag₃PO₄ in the nanocomposite exhibited a smaller size and higher efficiency in degrading dyes than the individually synthesized Ag₃PO₄ when exposed to light. Furthermore, the magnetic properties of CoFe_1.95Y_0.05O₄ enabled the nanocomposite to possess magnetic separation capabilities. The stable crystal structure and effective degradation ability of the nanocomposite were demonstrated through cyclic degradation experiments. It was shown that Ag₃PO₄/CoFe_1.95Y_0.05O₄-0.2 could deliver the highest activity and stability in degrading the dyes, and 98% of the dyes could be reduced within 30 min. Additionally, the photocatalytic enhancement mechanism and cyclic degradation stability of the magnetic nanocomposites were also proposed.

Ag3PO4-based photocatalysts and their application in organic-polluted wastewater treatment

Semiconductor photocatalysis technology has shown great potential in the field of organic pollutant removal, as it can use clean and pollution-free solar energy as driving force. The discovery of silver phosphate (Ag₃PO₄) is a major breakthrough in the field of visible light responsive semiconductor photocatalysis due to its robust capacity to absorb visible light < 520 nm. Furthermore, the holes produced in Ag₃PO₄ under light excitation possess a strong oxidation ability. However, the strong oxidation activity of Ag₃PO₄ is only achieved in the presence of electron sacrifice agents. Otherwise, photocorrosion would greatly reduce the reuse efficiency of Ag₃PO₄. This review thus focuses on the structural characteristics and preparation methods of Ag₃PO₄. Particularly, the recent advances in noble metal deposition, ion doping, and semiconductor coupling, as well as methods of magnetic composite modification for the improvement of catalytic activity and recycling efficiency of Ag₃PO₄-based catalysts, were also discussed, and all of these measures could enhance the catalytic performance of Ag₃PO₄ toward organic pollutants degradation. Additionally, some potential modification methods for Ag₃PO₄ were also proposed. This review thus provides insights into the advantages and disadvantages of the application of Ag₃PO₄ in the field of photocatalysis, clarifies the photocorrosion essence of Ag₃PO₄, and reveals the means to improve photocatalytic activity and stability of Ag₃PO₄. Furthermore, it provides a theoretical and methodological basis for studying Ag₃PO₄-based photocatalyst and also compiles valuable information regarding the photocatalytic treatment of organic polluted wastewater.

Sonochemical synthesis of ZnCo2O4/Ag3PO4 heterojunction photocatalysts for the degradation of organic pollutants and pathogens: a combined experimental and computational study

ZnCo2O4/Ag3PO4 heterostructure nanoparticles were prepared by a facile ultrasonic method and characterized by various techniques. The photocatalytic activity of ZnCo2O4/Ag3PO4 nanoparticles was investigated for the degradation of organic pollutants (methyl...

Graphene/silver-based composites and coating on dead coral for degradation of organic pollution using the Z-scheme mechanism

A high-performance photocatalytic nanocomposite consisting of silver phosphate-based particles with GO and RGO was synthesized by co-precipitation and hydrothermal methods. Ag₃PO₄ was prepared by a co-precipitation method. The as-prepared Ag₃PO₄ nanocomposites were characterized by different analyses. The results demonstrated that the Ag₃PO₄ particles were well dispersed on the graphene-based surfaces. The photocatalytic performance of the GO/RGO/Ag₃PO₄ nanocomposite was evaluated for the photodegradation of methylene blue (MB) under exposure to visible light (xenon lamp λ > 400 nm). The degradation rate was about 98% in 5 min. The enhancement in photocatalytic performance is attributed to the simultaneous presence of RGO and GO, which show significantly high absorption of organic molecules on the surface of GO/RGO, allowing the effective transfer and separation of photogenerated electrons. In addition, this modified structure can be in situ synthesized on dead coral structures that can be used in future real case-studies of the degradation of other organic pollutants. The ingredient of these composites, however, is about 93% Ag₃PO₄.

A high-performance photocatalytic nanocomposite consisting of silver phosphate-based particles with GO and RGO was synthesized by co-precipitation and hydrothermal methods.

TiO2 Modified with Organic Acids for the Decomposition of Chlorfenvinphos under the Influence of Visible Light: Activity, Performance, Adsorption, and Kinetics

Photocatalytic decomposition of chlorfenvinphos (CFVP) in the presence of titanium dioxide (TiO₂) modified with organic acids: pyruvic (PA) and succinic (SA) under the visible light radiation has been studied. The following tests were examined: dose of photocatalysts, adsorption time, pH of the model solution, deactivation of catalysts, the role of oxygen, identification of free radicals for the CFVP decomposition, Langmuir-Hinshelwood kinetics. The synthesized materials were characterized by Scanning Electron Microscopy (SEM) and UV-Vis. At 10 wt.% of acid (90:10) decomposition of chlorfenvinphos was the most effective in the following conditions: dose of catalyst 50.0 mg/L, time of adsorption = 20 min, pH of model solution = 3.0. Under these conditions the order of photocatalyst efficiency has been proposed: TiO₂/PA/90:10 > TiO₂/SA/90:10 > TiO₂ with the removal degree of 85, 72 and 48%. The mathematically calculated half-life at this conditions was 27.0 min and 39.0 min for TiO₂/PA/90:10 and TiO₂/SA/90:10 respectively, compared to 98 min for pure TiO₂. It has been determined that the O₂^- radicals and holes (h⁺) are the main reactive species involved in the photodegradation of chlorfenvinphos. The results of this study showed that method may be an interesting alternative for the treatment of chlorfenvinphos contaminated wastewater.

Special Issue: Novel Photoactive Materials

Photoactivity represents the ability of a material to activate when interacting with light. It can be declined in many ways, and several functionalities arising from this behavior of materials can be exploited, all leading to positive repercussions on our environment. There are several classes of effects of photoactivity, all of which have been deeply investigated in the last few decades, allowing researchers to develop more and more efficient materials and devices. The special issue “Novel Photoactive Materials” has been proposed as a means to present recent developments in the field; for this reason the articles included touch different aspects of photoactivity, from photocatalysis to photovoltaics to light emitting materials, as highlighted in this editorial.