Efficient Photocatalytic Degradation of Malachite Green in Seawater by the Hybrid of Zinc-Oxide Nanorods Grown on Three-Dimensional (3D) Reduced Graphene Oxide(RGO)/Ni Foam

Green synthesis of MnO2 nanoparticles from Psidium guajava leaf extract: Morphological characterization, photocatalytic and DNA/BSA interaction studies

In this work, a simple, efficient and eco-friendly green synthesis of manganese dioxide nanoparticles (MnO2NPs) by Psidium guajava leaf extract was described. Fourier-Transform infrared spectra results revealed that involvement of the plant extract functional groups in the formation of MnO2NPs. The UV-vis absorption spectra of the synthesized MnO2NPs exhibited absorption peaks at 374 nm, which were attributed to the band gap of the MnO2NPs. Crystal phase identification of the MnO2NPs were characterized by X-ray diffraction analysis and the formation of crystalline MnO2NPs have been confirmed. Furthermore, scanning electron microscopy analysis showed that the synthesized MnO2NPs have a spherical in shape. Interestingly, the prepared green synthesized MnO2NPs showed catalytic degradation activity for malachite green dye. Malachite green's photocatalytic degradation was detected spectrophotometrically in the wavelength range of 250-900 nm, and it was discovered to have a photodegradation efficiency of 75.5 % within 90 min when exposed to solar radiation. Green synthesized MnO2NPs are responsible for this higher activity. An interaction between synthesized NPs and biomolecules, including CT-DNA and BSA was also evaluated. The spectrophotometric and Fluoro spectroscopic analyses indicate a gradual reduction in peak intensities and shifts in wavelengths, indicating binding and affinity between the NPs and the biomolecules.

Highly Efficient Photocatalysts for Methylene Blue Degradation Based on a Platform of Deposited GO-ZnO Nanoparticles on Polyurethane Foam

The demand for reactive dyes in industries has increased rapidly in recent years, and producing a large quantity of dye-containing effluent waste contaminates soils and water streams. Current efforts to remove these harmful dyes have focused on utilizing functionalized nanomaterials. A 3D polyurethane foam loaded with reduced graphene oxide (rGO) and ZnO nanocomposite (PUF/rGO/ZnO) has been proposed as an efficient structural design for dye degradation under the influence of visible light. The proposed structure was synthesized using a hydrothermal route followed by microwave irradiation. The resultant 3D PUF/rGO/ZnO was examined and characterized by various techniques such as XRD, FTIR, SEM, EDAX, BET, and UV-visible spectroscopy. SEM data illustrated that a good dispersion and embedment of the rGO/ZnO NPs within the PUF matrix occurred. The adsorption capacity for neat PUF showed that around 20% of the Methylene blue (MB) dye was only adsorbed on its surface. However, it was found that an exceptional adsorption capacity for MB degradation was observed when the rGO/ZnO NPs inserted into the PUF, which initially deteriorated to ~ 70 % of its initial concentration. Notably, the MB dye was completely degraded within 3 h.

Enhanced photodegradation of methylene blue from aqueous solution using Al-doped ZnS nanoparticles

The post-transition semiconducting material of pure zinc sulfide (ZnS) and various concentrations of aluminum (Al) (2.5 wt%, 5.0% wt, 7.5 wt%, and 10% calcined at 200 °C) doped ZnS nanoparticles (NPs) were synthesized by sol-gel procedure. The crystal-like nature and phase structure of the product were examined by powder XRD analysis. This analysis shows that the pure ZnS nanoparticle does not form any secondary phase. The functional group of synthesized materials was analyzed by FTIR examination. The energy gap of the materials is calculated using electro-optic analysis and the Kubelka-Munk equation varies from 3.04 nm to 3.63 nm. The photoluminescence studies show the wide emissions (blue to green) for pure ZnS and Al-doped ZnS nanomaterials. The SEM images show the spherical structure and the agglomerated nanostructures. The presence of Zn, S, and Al are confirmed by EDAX spectra. From HR-TEM studies, pure ZnS and Al-doped ZnS nanoparticles exhibit uniform particle sizes. The rate of degradation was observed using MB dye. MB dye has maximum wavelength (λ_max) of 664 nm. The dye degradation efficiency was improved as the dye ratio increased. Photocatalytic activities studies show the intensity of photocatalytic activities decreased for the maximum time interval. Doping of Al in ZnS boosts the photocatalytic activity. Hence, Al-doped ZnS appears to be better decomposing MB dye when exposed to visible light.

Malachite Green Dye Decoloration over Au/TiO2-Nanotubes Photocatalyst under Simulate Visible-Light Irradiation

Au nanoparticles were supported on TiO₂ nanotubes by a novel vapor phase impregnation approach (VPI) using gold dimethyl-acetylacetonate as a precursor. This study aimed to evaluate the capacity of these materials in the photodecoloration of malachite green dye, with the vision to correlate the chemical, structural, morphological, and optical properties with its photocatalytic performance. The photocatalysts were characterized by X-ray diffraction, Raman spectroscopy, X-ray photoelectronic spectroscopy (XPS), electronic microscopy (HAADF-STEM and HRTEM), and UV-vis spectroscopy. The techniques mentioned above made it possible to detect the presence of small gold nanoparticles (around 3.1 nm), with a high apparent dispersion even at high metal loading for all analyzed systems. According to the XPS results, the Au nanoparticles remain reduced (Au°), and they have a high electronic interaction with TiO₂, which eventually originates an electronic exchange between them and consequently a decrease in the band gap energy. In addition, the surface plasmonic resonance observed through UV-vis spectroscopy of the Au nanoparticles are factors that can be related to the high decoloration observed in these photocatalysts, specifically in the 15 wt% Au material, which achieves maximum photodecoloration of malachite green dye at 93%.

Degradation of mixed cationic dye pollutant by metal free melem derivatives and graphitic carbon nitride

Graphitic carbon nitride (GCN), a polymeric metal free catalyst is widely used to degrade the toxic organic dye from the aqueous pollution. However, its catalytic efficiency and effective simultaneous reduction of mixed dye is still a challenge. Here, we have tuned the physiochemical properties of the GCN and melem derivatives by facilely tuning the degree of polycondensation and examined their catalytic activity towards the removal of cationic dye individually and together in solution. Catalysts were synthesized by thermal treatment of low-cost melamine and characterized by XRD, FTIR, RAMAN, FE-SEM, EDX, UV-DRS, and FL spectroscopy to confirm materials' structure, phase, morphology and optical properties. A suitable phase of the catalyst (M-450) exhibited superior removal capacity with a high-rate constant compared to others. The results demonstrate that M-450 has a maximum loading efficacy of 2.13 and 1.12 mg g^-1 for methylene blue (MB) and Rhodamine B (RhB) dyes respectively in a single dye system. Attractively, when MB and RhB co-exist in the solution, the efficacy increased by 14% (2.44 mg g^-1) and 27% (1.43 mg g^-1) for MB and RhB respectively. The adsorption kinetics, stability, effect of pH and reusability of M-450 catalyst was testified. Further, radical scavenger experiments and terephthalic acid tests were carried out to explain the reaction mechanism involved in the degradation of textile dyes. Moreover, electron paramagnetic resonance (EPR) analysis validated the availability of hydroxyl radicals in the photocatalytic reaction. Excellent stability and reusability were attained even after five successive cycles, demonstrating a suitable photocatalyst for the efficient degradation of mixed dye.

In vitro genotoxicity of dibutyl phthalate on A549 lung cells at air-liquid interface in exposure concentrations relevant at workplaces

The ubiquitous use of phthalates in various materials and the knowledge about their potential adverse effects is of great concern for human health. Several studies have uncovered their role in carcinogenic events and suggest various phthalate-associated adverse health effects that include pulmonary diseases. However, only limited information on pulmonary toxicity is available considering inhalation of phthalates as the route of exposure. While in vitro studies are often based on submerged exposures, this study aimed to expose A549 alveolar epithelial cells at the air-liquid interface (ALI) to unravel the genotoxic and oxidative stress-inducing potential of dibutyl phthalate (DBP) with concentrations relevant at occupational settings. Within this scope, a computer modeling approach calculating alveolar deposition of DBP particles in the human lung was used to define in vitro ALI exposure conditions comparable to potential occupational DBP exposures. The deposited mass of DBP ranged from 0.03 to 20 ng/cm² , which was comparable to results of a human lung particle deposition model using an 8 h workplace threshold limit value of 580 μg/m³ proposed by the Scientific Committee on Occupational Exposure Limits for the European Union. Comet and Micronucleus assay revealed that DBP induced genotoxicity at DNA and chromosome level in sub-cytotoxic conditions. Since genomic instability was accompanied by increased generation of the lipid peroxidation marker malondialdehyde, oxidative stress might play an important role in phthalate-induced genotoxicity. The results highlight the importance of adapting in vitro studies to exposure scenarios relevant at occupational settings and reconsidering occupational exposure limits for DBP.

UV Photochromism in Transition Metal Oxides and Hybrid Materials

Limited levels of UV exposure can be beneficial to the human body. However, the UV radiation present in the atmosphere can be damaging if levels of exposure exceed safe limits which depend on the individual the skin color. Hence, UV photochromic materials that respond to UV light by changing their color are powerful tools to sense radiation safety limits. Photochromic materials comprise either organic materials, inorganic transition metal oxides, or a hybrid combination of both. The photochromic behavior largely relies on charge transfer mechanisms and electronic band structures. These factors can be influenced by the structure and morphology, fabrication, composition, hybridization, and preparation of the photochromic materials, among others. Significant challenges are involved in realizing rapid photochromic change, which is repeatable, reversible with low fatigue, and behaving according to the desired application requirements. These challenges also relate to finding the right synergy between the photochromic materials used, the environment it is being used for, and the objectives that need to be achieved. In this review, the principles and applications of photochromic processes for transition metal oxides and hybrid materials, photocatalytic applications, and the outlook in the context of commercialized sensors in this field are presented.

A Three-Component Hybrid Templated by Asymmetric Viologen Exhibiting Visible-Light-Driven Photocatalytic Degradation on Dye Pollutant in Maritime Accident Seawater

The increasing dangerous chemical pollutants led by shipping accidents call for the new pollutant treatment strategy. In this work, a new three-component hybrid {[(BiI6)I13]·2I3·(H-BPA)4}n (1) can be used in dye degradation in seawater. The highly interesting feature of 1 lies in its unique 1-D Z-shape [(BiI6)I13]n6− infinite chain constructed from the I···I contacts between mono-nuclear (BiI6)3− anions and I133− polyiodide anions. Finally, the hydrogen bonds between [(BiI6)I13]n6− polyanions and H-BPA2+ cations contribute to the formation a quasi-3-D network. Specifically, 1 exhibits the wide absorption zone from ultraviolet to visible regions and high charge-separation efficiency, hinting its application in visible-light catalysis. As expected, 1 represents photocatalytic activity for the degradation of rhodamine B in seawater with degradation ratio of 90%, and the photocatalytic performance is stable. This work might provide new photocatalytic material for pollutant treatment in shipping accidents.

Sonophotocatalytic Degradation of Malachite Green by Nanocrystalline Chitosan-Ascorbic Acid@NiFe2O4 Spinel Ferrite

Statistics show that more than 700 thousand tons of dye are produced annually across the globe. Around 10–20% of this is used in industrial processes such as printing and dyeing, while about 50% of the dye produced is discharged into the environment without proper physicochemical treatment. Even trace amounts of dye in water can reduce oxygen solubility and have carcinogenic, mutagenic, and toxic effects on aquatic organisms. Therefore, before dye-containing wastewater is discharged into the environment, it must be properly treated. The present study investigates the green synthesis of nickel ferrite NiFe2O4 (NIFE) spinel magnetic nanoparticles (MNPs) via chemical coprecipitation of a solution of Ni2+/Fe3+ in the presence of a biopolymer blend of chitosan (CT) and ascorbic acid (AS). The magnetic nanomaterial was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy–energy dispersive X-ray analysis (SEM-EDX), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-Vis), differential scanning calorimetry (DSC), and vibrating-sample magnetometry (VSM). The material was further explored as a catalyst for the photocatalytic degradation of malachite green (MG) under visible light irradiation coupled with ultrasonic waves. The combination of 90 min of visible solar light irradiation with 6.35 W·mL−1 ultrasonic power at pH 8 resulted in 99% of the photocatalytic efficiency of chitosan-ascorbic acid@NIFE (CTAS@NIFE) catalyst for 70 mg·L−1 MG. The quenching of the photocatalytic efficiency from 98% to 64% in the presence of isopropyl alcohol (IPA) suggested the involvement of hydroxy (•OH) radicals in the mineralization process of MG. The high regression coefficients (R2) of 0.99 for 35, 55, and 70 mg·L−1 MG indicated the sonophotocatalysis of MG by CTAS@NIFE was best defined by a pseudo first-order kinetic model. The mechanism involves the adsorption of MG on the catalyst surface in the first step and thereby mineralization of the MG by the generated hydroxyl radicals (•OH) under the influence of visible radiation coupled with 6.34 W·mL−1 ultrasonic power. In the present study the application of photodegradation process with sonochemistry results in 99% of MG mineralization without effecting the material structure unlike happens in the case adsorption process. So, the secondary pollution (generally happens in case of adsorption) can be avoided by reusing the spent material for another application instead of disposing it. Thus, the ecofriendly synthesis protocol, ease in design of experimentation like use of solar irradiation instead of electric power lamps, reusability and high efficiency of the material suggested the study to be potentially economical for industrial development at pilot scale towards wastewater remediation.

Fabrication and investigation on Ag nanowires/TiO2 nanosheets/graphene hybrid nanocomposite and its water treatment performance

In this paper, a novel Ag nanowires/TiO₂ nanosheets/graphene nanocomposite was fabricated via a facile method of hydrothermal and calcination, and then the water treatment performance of it was evaluated for methylene blue (MB) and Escherichia coli removal. The as-prepared Ag nanowires/TiO₂ nanosheets/graphene nanocomposite was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), UV-visible diffuse reflection spectroscopy (DRS), molecular dynamics simulation, and gas chromatography-mass spectrometry (GC-MS). All data revealed that the Ag/TiO₂/graphene nanocomposite showed a rich cell structure. The photocatalytic activity of Ag/TiO₂/graphene nanocomposite is higher than those of pristine TiO₂ nanosheets and TiO₂/graphene nanocomposite. Under optimized conditions, the degradation efficiency was 100% and 71% for MB (30 mg/L) and with 10 mg Ag/TiO₂/graphene nanocomposite under UV and visible light irradiation for 2 h, respectively. Ag/TiO₂/graphene also showed excellent bacteria-killing activity. Meanwhile, the Ag/TiO₂/graphene nanocomposite exhibited microstructure stability and cyclic stability. The water treatment performance was enhanced mainly attributed to the excellent adsorption performance of graphene and the high efficiency in separation of electron-hole pairs induced by the remarkable synergistic effects of TiO₂, Ag, and graphene. On the basis of the experimental results, the photocatalytic mechanism and MB degradation mechanism were proposed. It is hoped that our work could avert the misleading message to the readership, hence offering a valuable source of reference on fabricating composite photocatalyst with stable microstructure and excellent performance for their application in the environment clean-up. Graphical abstract.

Highly Sensitive Biosensors Based on Biomolecules and Functional Nanomaterials Depending on the Types of Nanomaterials: A Perspective Review

Biosensors are very important for detecting target molecules with high accuracy, selectivity, and signal-to-noise ratio. Biosensors developed using biomolecules such as enzymes or nucleic acids which were used as the probes for detecting the target molecules were studied widely due to their advantages. For example, enzymes can react with certain molecules rapidly and selectively, and nucleic acids can bind to their complementary sequences delicately in nanoscale. In addition, biomolecules can be immobilized and conjugated with other materials by surface modification through the recombination or introduction of chemical linkers. However, these biosensors have some essential limitations because of instability and low signal strength derived from the detector biomolecules. Functional nanomaterials offer a solution to overcome these limitations of biomolecules by hybridization with or replacing the biomolecules. Functional nanomaterials can give advantages for developing biosensors including the increment of electrochemical signals, retention of activity of biomolecules for a long-term period, and extension of investigating tools by using its unique plasmonic and optical properties. Up to now, various nanomaterials were synthesized and reported, from widely used gold nanoparticles to novel nanomaterials that are either carbon-based or transition-metal dichalcogenide (TMD)-based. These nanomaterials were utilized either by themselves or by hybridization with other nanomaterials to develop highly sensitive biosensors. In this review, highly sensitive biosensors developed from excellent novel nanomaterials are discussed through a selective overview of recently reported researches. We also suggest creative breakthroughs for the development of next-generation biosensors using the novel nanomaterials for detecting harmful target molecules with high sensitivity.

Investigation of the structural, optical and crystallographic properties of Bi2WO6/Ag plasmonic hybrids and their photocatalytic and electron transfer characteristics

We have fabricated an efficient Bi₂WO₆-Ag plasmonic hybrid via the photoreduction technique and the obtained materials were well characterized with sophisticated instruments.