Catalytically Active Imine-based Covalent Organic Frameworks for Detoxification of Nerve Agent Simulants in Aqueous Media

An 'on-off-on' fluorescent switch based on a luminous covalent organic framework for the rapid and selective detection of glyphosate

Glyphosate, the most used herbicide in the world, has a residue problem that cannot be ignored. However, glyphosate itself does not have fluorescence emission and lacks the conditions for fluorescence detection. In this work, a rapid and selective fluorescence detection method of glyphosate was designed by an 'on-off-on' fluorescent switch based on a luminous covalent organic framework (L-COF). Only the fixed concentration of Fe3+ as an intermediate could trigger the fluorescent switch and no incubation step was required. The proposed method showed good accuracy with a correlation coefficient of 0.9978. The method's limits of detection and quantitation were 0.88 and 2.93 μmol/L, which were lower than the maximum allowable residue limits in some regulations. Environmental water samples and tomatoes were selected as actual samples to verify the application in a complex matrix. A satisfactory mean recovery from 87% to 106% was gained. Furthermore, Fe3+ could induce fluorescence quenching of L-COF through the photo-induced electron transfer (PET) effect, while the addition of glyphosate could block the PET effect to achieve detection. These results demonstrated the proposed method had abilities to detect glyphosate and broaden the application of L-COF.

Electrochemical (Bio)Sensors Based on Covalent Organic Frameworks (COFs)

Covalent organic frameworks (COFs) are defined as crystalline organic polymers with programmable topological architectures using properly predesigned building blocks precursors. Since the development of the first COF in 2005, many works are emerging using this kind of material for different applications, such as the development of electrochemical sensors and biosensors. COF shows superb characteristics, such as tuneable pore size and structure, permanent porosity, high surface area, thermal stability, and low density. Apart from these special properties, COF’s electrochemical behaviour can be modulated using electroactive building blocks. Furthermore, the great variety of functional groups that can be inserted in their structures makes them interesting materials to be conjugated with biological recognition elements, such as antibodies, enzymes, DNA probe, aptamer, etc. Moreover, the possibility of linking them with other special nanomaterials opens a wide range of possibilities to develop new electrochemical sensors and biosensors.

Structural Characteristics and Environmental Applications of Covalent Organic Frameworks

Covalent organic frameworks (COFs) are emerging crystalline polymeric materials with highly ordered intrinsic and uniform pores. Their synthesis involves reticular chemistry, which offers the freedom of choosing building precursors from a large bank with distinct geometries and functionalities. The pore sizes of COFs, as well as their geometry and functionalities, can be pre-designed, giving them an immense opportunity in various fields. In this mini-review, we will focus on the use of COFs in the removal of environmentally hazardous metal ions and chemicals through adsorption and separation. The review will introduce basic aspects of COFs and their advantages over other purification materials. Various fabrication strategies of COFs will be introduced in relation to the separation field. Finally, the challenges of COFs and their future perspectives in this field will be briefly outlined.

Covalent Organic Frameworks: Synthesis, Properties and Applications-An Overview

Covalent Organic Frameworks (COFs) are an exciting new class of microporous polymers with unprecedented properties in organic material chemistry. They are generally built from rigid, geometrically defined organic building blocks resulting in robust, covalently bonded crystalline networks that extend in two or three dimensions. By strategically combining monomers with specific structures and properties, synthesized COF materials can be fine-tuned and controlled at the atomic level, with unparalleled precision on intrapore chemical environment; moreover, the unusually high pore accessibility allows for easy post-synthetic pore wall modification after the COF is synthesized. Overall, COFs combine high, permanent porosity and surface area with high thermal and chemical stability, crystallinity and customizability, making them ideal candidates for a myriad of promising new solutions in a vast number of scientific fields, with widely varying applications such as gas adsorption and storage, pollutant removal, degradation and separation, advanced filtration, heterogeneous catalysis, chemical sensing, biomedical applications, energy storage and production and a vast array of optoelectronic solutions. This review attempts to give a brief insight on COF history, the overall strategies and techniques for rational COF synthesis and post-synthetic functionalization, as well as a glance at the exponentially growing field of COF research, summarizing their main properties and introducing the numerous technological and industrial state of the art applications, with noteworthy examples found in the literature.

Facile Fabric Detoxification Treatment Method Using Microwave and Polyethyleneimine Against Nerve Gas Agents

Generally, detoxification fabrics are defined as fabrics that remove or inhibit the production of toxic compounds, especially chemical warfare agents such as nerve gas agents. They are usually prepared using a complicated and time-consuming method. This study suggests a facile treatment method for preparing detoxification fabrics against nerve gas agents using polyethyleneimine and microwave curing. The detoxification properties of polyethyleneimine and microwave-treated polypropylene nonwoven fabric were evaluated using diisopropylfluoro-phosphate, which is a nerve agent simulant. The treated polypropylene fabric decontaminated 53.6% of diisopropylfluorophosphate (DFP) in 2 h at 32 °C, and the half-life of DFP on the surface of the treated fabric was 122 min. The result indicates that the treated fabric can act as a basic organocatalyst for the DFP hydrolysis and has a shorter half-life owing to the large number of amine groups. Therefore, the facile treatment method has the potential for use in the preparation of detoxification fabrics.

Metal-Organic Framework (MOF)/Epoxy Coatings: A Review

Epoxy coatings are developing fast in order to meet the requirements of advanced materials and systems. Progress in nanomaterial science and technology has opened a new era of engineering for tailoring the bulk and surface properties of organic coatings, e.g., adhesion to the substrate, anti-corrosion, mechanical, flame-retardant, and self-healing characteristics. Metal-organic frameworks (MOFs), a subclass of coordinative polymers with porous microstructures, have been widely synthesized in recent years and applied in gas and energy storage, separation, sensing, environmental science and technology, and medicine. Nevertheless, less attention has been paid to their performance in coatings. Well-known as micro- and nanoporous materials, with a tailorable structure consisting of metal ions and organic linkers, MOFs have a huge loading capacity, which is essential for the delivery of corrosion inhibitors. This review paper attempts to highlight the importance of epoxy/MOF composites for coating applications. A particular emphasis was explicitly placed on the anti-corrosion, flame-retardant, mechanical, and dielectric properties of epoxy/MOF coatings.

Zirconium-Based Metal-Organic Frameworks for the Catalytic Hydrolysis of Organophosphorus Nerve Agents

Organophoshorus nerve agents are among the most toxic chemicals known to humans, and because of their unfortunate recent use despite international bans, there is an urgent need to develop materials that can effectively degrade these nerve agents. Within the past decade, zirconium-based metal-organic frameworks (Zr-MOFs) have emerged as a bioinspired class of materials capable of rapidly hydrolyzing these compounds and significantly diminishing their toxicity. Both experimental and computational insights have guided the design of Zr-MOFs, leading to the development of catalysts capable of detoxifying nerve agents and simulants, chemicals with similar functionality but lower toxicity, via hydrolysis within seconds in basic aqueous solutions. While these systems are acceptable for the elimination of stockpile weapons, translating this catalytic performance to filters incorporating Zr-MOFs that can be used in masks or protective clothing is not trivial. As such, a large area of focus recently has been targeted toward integrating these hydrolysis catalysts into protective clothing and gear while retaining the performance from solution-based catalytic systems. This Forum Article provides an overview of the development of Zr-MOFs for the catalytic hydrolysis of organophosphorus substrates, including design principles and mechanistic insights for both solution-based and textile-coated systems. Finally, we highlight the remaining challenges yet to be addressed and offer perspectives on the future directions for this field.

Coordination-Cage-Catalysed Hydrolysis of Organophosphates: Cavity- or Surface-Based?

The hydrophobic central cavity of a water-soluble M8 L12 cubic coordination cage can accommodate a range of phospho-diester and phospho-triester guests such as the insecticide "dichlorvos" (2,2-dichlorovinyl dimethyl phosphate) and the chemical warfare agent analogue di(isopropyl) chlorophosphate. The accumulation of hydroxide ions around the cationic cage surface due to ion-pairing in solution generates a high local pH around the cage, resulting in catalysed hydrolysis of the phospho-triester guests. A series of control experiments unexpectedly demonstrates that-in marked contrast to previous cases-it is not necessary for the phospho-triester substrates to be bound inside the cavity for catalysed hydrolysis to occur. This suggests that catalysis can occur on the exterior surface of the cage as well as the interior surface, with the exterior-binding catalysis pathway dominating here because of the small binding constants for these phospho-triester substrates in the cage cavity. These observations suggest that cationic but hydrophobic surfaces could act as quite general catalysts in water by bringing substrates into contact with the surface (via the hydrophobic effect) where there is also a high local concentration of anions (due to ion pairing/electrostatic effects).