Hydroxyapatite and Fluorapatite in Conservative Dentistry and Oral Implantology-A Review

A coating machine for coating filaments with bioactive nanomaterials for extrusion 3D printing

Extrusion printing based on biocompatible filaments offers a wide variety of targeted medical and dental applications in the area of personalized medicine, if combined with bioactive nanomaterials. However, this requires filament to be coated with bioactive nanomaterial. This study introduces a concept of a machine to coat filament with bioactive nanomaterials and its application. A machine was constructed with modules manufactured using additive manufacturing. A filament spool of polylactide (PLA) or glycol-modified polyethylene terephthalate (PETG) was transported through a copper tube, with the outer surface of the filament heated to the appropriate glass transition temperature to incorporate added nanomaterials such as nano-hydroxyapatite (nHA) or nano-fluorapatite(nFA). Coatings with nHA led to an increase in diameter of around 3 μm, while coatings with nFA increased the diameter by 4 μm. Printing of cubes with a standard extrusion printer platform using PLA or PETG filaments with added nHA or nFA has been successfully carried out. Scanning electron microscope (SEM) images of coated filaments and printed cubes showed an irregular distribution of nHA or nFA, which could be verified by energy dispersive X-ray analysis (EDX). Adding and adjusting bioactive nanomaterials to filament with a coating machine for filament proved to generate printable filaments. With the wide range of possible applications by different nanomaterials it is anticipated that extrusion printing can cover needs for personalized medicine and dentistry.

In vivo assessment of marine vs bovine origin collagen-based composite scaffolds promoting bone regeneration in a New Zealand rabbit model

The ability of human tissues to self-repair is limited, which motivates the scientific community to explore new and better therapeutic approaches to tissue regeneration. The present manuscript provides a comparative study between a marine-based composite biomaterial, and another composed of well-established counterparts for bone tissue regeneration. Blue shark skin collagen was combined with bioapatite obtained from blue shark's teeth (mColl:BAp), while bovine collagen was combined with synthetic hydroxyapatite (bColl:Ap) to produce 3D composite scaffolds by freeze-drying. Collagens showed similar profiles, while apatite particles differed in their composition, being the marine bioapatite a fluoride-enriched ceramic. The marine-sourced biomaterials presented higher porosities, improved mechanical properties, and slower degradation rates when compared to synthetic apatite-reinforced bovine collagen. The in vivo performance regarding bone tissue regeneration was evaluated in defects created in femoral condyles in New Zealand rabbits twelve weeks post-surgery. Micro-CT results showed that mColl:BAp implanted condyles had a slower degradation and an higher tissue formation (17.9 ± 6.9 %) when compared with bColl:Ap implanted ones (12.9 ± 7.6 %). The histomorphometry analysis provided supporting evidence, confirming the observed trend by quantifying 13.1 ± 7.9 % of new tissue formation for mColl:BAp composites and 10.4 ± 3.2 % for bColl:Ap composites, suggesting the potential use of marine biomaterials for bone regeneration.

Urchin-like multiscale structured fluorinated hydroxyapatite as versatile filler for caries restoration dental resin composites

Caries is one of the most prevalent human diseases, resulting from demineralization of tooth hard tissue caused by acids produced from bacteria, and can progress to pulpal inflammation. Filling restoration with dental resin composites (DRCs) is currently the most common treatment for caries. However, existing DRCs suffer from low fracture strength and lack comprehensive anti-caries bioactivity including remineralization, pulp protection, and anti-cariogenic bacteria effects. In this study, inspired by plant roots' ability to stabilize and improve soil, fluorinated urchin-like hydroxyapatite (FUHA) with a three-dimensional whisker structure and bioactive components of calcium, phosphorus, and fluorine was designed and synthesized by a dynamic self-assembly method. Furthermore, versatile FUHA particles with different loading fractions were used as functional fillers to fabricate methacrylate-based DRCs, where the urchin-like hydroxyapatite (UHA) filled DRCs and commercial DRCs (Z350XT and BEAUTIFIL II) served as the control groups. The results demonstrated that FUHA with 50 wt% loading in resin matrix endowed DRC (F5) with excellent physicochemical properties, dentin remineralization property, cell viability, promotion of dental pulp stem cells mineralization, and antibacterial properties. Meanwhile, F5 also presented good clinical handling and aesthetic characteristics. Therefore, structure/functional-integrated FUHA filled DRCs have potential as a promising strategy for tooth restoration and anti-caries bioactivity.

A Comparison of the Enamel Remineralisation Potential of Self-Assembling Peptides

BACKGROUND

The aim of this research was to compare the efficacy of the remineralising potential of self-assembling peptides (SAPs): Curodont Repair (P11-4), P26, and leucine-rich amelogenin peptides (LRAP) with the standard 5% NaF varnish (Duraphat) on early enamel caries lesions (EECLs).

METHODS

A demineralising solution (DS) was used to create artificial EECLs in human dental enamel specimens, which were randomly allocated to treatment groups: P11-4; P26 solution; LRAP solution; 5% NaF varnish; and deionised water (DIW). Each specimen was subjected to 8 days of pH cycling. Specimens from each test group were subjected to microcomputed tomography (micro-CT) and nanomechanical testing to assess mineral density (MD), hardness (H), and elastic modulus (EM) properties of sound, demineralised, and treated enamel.

RESULTS

The mean MD percentage gain was highest in the P26 and P11-4 groups, followed by the LRAP, 5% NaF varnish, and DIW groups. There were statistically significant differences amongst groups. In the outer layer of EECLs, the EM and H were highest in P26 and P11-4 groups, followed by the LRAP and 5% NaF varnish. In the inner layer of EECLs, the EM and H were highest in P11-4 and P26 groups, indicative of enhanced penetration and remineralisation of the deeper parts of the artificial EECLs.

CONCLUSIONS

P26 and P11-4 SAPs are more effective than 5% NaF varnish in remineralising the depth of EECLs.

Biological Properties and Medical Applications of Carbonate Apatite: A Systematic Review

Bone defects represent an everyday challenge for clinicians who work in the fields of orthopedic surgery, maxillofacial and oral surgery, otorhinolaryngology, and dental implantology. Various bone substitutes have been developed and utilized, according to the needs of bone reconstructive surgery. Carbonate apatite has gained popularity in recent years, due to its excellent tissue behavior and osteoconductive potential. This systematic review aims to evaluate the role of carbonate apatite in bone reconstructive surgery and tissue engineering, analyze its advantages and limitations, and suggest further directions for research and development. The Web of Science, PubMed, and Scopus electronic databases were searched for relevant review articles, published from January 2014 to 21 July 2023. The study was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Eighteen studies were included in the present review. The biological properties and medical applications of carbonate apatite (CO3Ap) are discussed and evaluated. The majority of articles demonstrated that CO3Ap has excellent biocompatibility, resorbability, and osteoconductivity. Furthermore, it resembles bone tissue and causes minimal immunological reactions. Therefore, it may be successfully utilized in various medical applications, such as bone substitution, scaffolding, implant coating, drug delivery, and tissue engineering.

Novel Synthesis Approach for Natural Tea Polyphenol-Integrated Hydroxyapatite

Hydroxyapatite (HAP) has garnered considerable interest in biomedical engineering for its diverse applications. Yet, the synthesis of HAP integrated with functional natural organic components remains an area ripe for exploration. This study innovatively utilizes the versatile properties of tea polyphenol (TP) to synthesize HAP nanomaterials with superior crystallinity and distinct morphologies, notably rod-like structures, via a chemical deposition process in a nitrogen atmosphere. This method ensures an enhanced integration of TP, as confirmed by thermogravimetric (TGA) analysis and a variety of microscopy techniques, which also reveal the dependence of TP content and crystallinity on the synthesis method employed. The research significantly impacts the field by demonstrating how synthesis conditions can alter material properties. It leads the way in employing TP-modified nano-HAP particles for biomedical applications. The findings of this study are crucial as they open avenues for the future development of tailored HAP nanomaterials, aiming at specific medical applications and advancements in nanotechnology.

Nanotechnology in toothpaste: Fundamentals, trends, and safety

Several studies have revealed that healthcare nanomaterials are widely used in numerous areas of dentistry, including prevention, diagnosis, treatment, and repair. Nanomaterials in dental cosmetics are utilized to enhance the efficacy of toothpaste and other mouthwashes. Nanoparticles are added to toothpastes for a variety of reasons, including dental decay prevention, remineralization, hypersensitivity reduction, brightening, and antibacterial qualities. In this review, the benefits and uses of many common nanomaterials found in toothpaste are outlined. Additionally, the capacity and clinical applications of nanoparticles as anti-bacterial, whitening, hypersensitivity, and remineralizing agents in the treatment of dental problems and periodontitis are discussed.

Microbiome-friendly PS/PVP electrospun fibrous membrane with antibiofilm properties for dental engineering

Dental caries is one of the most prevalent and biofilm-associated oral diseases in humans. Streptococcus mutans, with a high ability to form biofilms by adhering to hard surfaces, has been established as an important etiological agent for dental caries. Therefore, it is crucial to find a way to prevent the formation of cariogenic biofilm. Here, we report an electrospun fibrous membrane that could inhibit the adhesion and biofilm formation of S. mutans. Also, the polystyrene (PS)/polyvinyl pyrrolidone (PVP) electrospun fibrous membrane altered the 3D biofilm architecture and decreased water-insoluble extracellular polysaccharide production. Notably, the anti-adhesion mechanism which laid in Coulomb repulsion between the negatively charged PS/PVP electrospun fibrous membrane and S. mutans was detected by zeta potential. Furthermore, metagenomics sequencing analysis and CCK-8 assay indicated that PS/PVP electrospun fibrous membrane was microbiome-friendly and displayed no influence on the cell viability of human gingival epithelial cells and human oral keratinocytes. Moreover, an in vitro simulation experiment demonstrated that PS/PVP electrospun fibrous membrane could decrease colony-forming unit counts of S. mutans effectively, and PS/PVP electrospun fibrous membrane carrying calcium fluoride displayed better anti-adhesion ability than that of PS/PVP electrospun fibrous membrane alone. Collectively, this research showed that the PS/PVP electrospun fibrous membrane has potential applications in controlling and preventing dental caries.

Influence of surface pre-reacted glass-ionomer (S-PRG) filler eluate on collagen morphology, remineralization, and ultimate tensile strength of demineralized dentin

OBJECTIVE

To evaluate the effect of ions released from surface pre-reacted glass-ionomer (S-PRG) filler on collagen morphology, remineralization, and ultimate tensile strength (UTS) of demineralized dentin.

MATERIALS AND METHODS

Bovine incisor root dentins were demineralized with EDTA and divided into three treatment groups: 1) water (control); 2) S-PRG filler eluate; 3) 125 ppm sodium fluoride (NaF). After a 3-min treatment, the specimens were stored in simulated body fluid (SBF) for 3 months. Collagen morphology and remineralization were assessed using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR). Additionally, ultimate tensile strength (UTS) was measured.

RESULTS

TEM and SEM demonstrated that S-PRG induced more effective remineralization compared to NaF, while the control group exhibited faint mineral deposition with collagen degradation. S-PRG displayed the most homogenous mineral deposition in collagen fibrils, along with closure of interfibrillar spaces. Extensive mineral precipitation was observed within dentinal tubules in the S-PRG group. In addition, S-PRG filler eluate demonstrated significantly higher phosphate-to-amide ratio and UTS compared to NaF and control groups (p < 0.05).

CONCLUSIONS

Ion released from S-PRG filler positively influenced collagen morphology, remineralization, and ultimate tensile strength of demineralized dentin.

CLINICAL SIGNIFICANCE

S-PRG filler enhances remineralization and improve the biomechanics of demineralized dentin.

Post-Orthodontic Relapse Prevention through Administration of a Novel Synthetic Carbonated Hydroxyapatite-Chitosan Hydrogel Derived from Blood Cockle Shell (Anadara granosa L.)

Relapse during passive orthodontic treatment is a major issue, with 70-90% frequency. This study examines whether blood cockle shells may be used to extract carbonated hydroxyapatite (CHA)-chitosan (CS). This study also aims to analyze the effect of CHA-CS on orthodontic relapse in rats. This study utilized 18 male Wistar rats which were randomly divided into two groups: CHA-CS and the control group (CG). The rats were subjected to a 35 cN orthodontic force for a duration of 7 days, after which the rats were conditioned to be passive. During this phase, the CHA-CS group received daily administration of CHA-CS hydrogel derived from the blood cockle shell. Subsequently, the appliances were detached to facilitate relapse. The distance between the mesial tips was measured using a digital caliper at three consecutive time points: 1, 5, and 7 days after debonding. The number of osteoblasts, osteoclasts, and fibroblasts was examined using hematoxylin-eosin staining. The data were subjected to statistical analysis using a t-test. The relapse distance of the CHA-CS group was lower than that of the control groups on day 7. Histological examinations using hematoxylin-eosin (HE) staining showed a significant increase in osteoblasts, a decrease in osteoclasts, and an increase in fibroblasts during orthodontic relapse movement (p < 0.05). This study found that blood cockle shell-derived CHA-CS may reduce orthodontic relapse by increasing osteoblasts and fibroblasts and by reducing the osteoclast number in rats.

Highly cyto- and immune compatible new synthetic fluorapatite nanomaterials co-doped with rubidium(I) and europium(III) ions

In the present study, biocompatible luminescent of nanosized fluorapatite doped with rubidium(I) (Rb+ ion) and europium(III) (Eu3+ ion) ions were synthesized via hydrothermal method. It was investigated the influence of co-doped Rb+ and Eu3+ ions on the structural, and morphological characteristics of the obtained fluorapatite materials. The characterization techniques utilized included: X-ray powder diffraction (XRPD), infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). Moreover, to establish the influence of the co-doped Rb+ and Eu3+ ions on the luminescence properties of the lanthanide ion, emission excitation, emission spectrum and luminescence decays were measured. This confirmed a distinct red emission originating from Eu3+ ions and an increased emission lifetime. To determine the biocompatibility of the obtained fluorapatite compounds, in vitro studies using normal dermal human fibroblasts were performed. The results of these studies clearly demonstrate the remarkable biocompatibility of our compounds. This discovery opens exciting prospects for the use of synthetic fluorapatites doped with Eu3+ and Rb+ ions in various biomedical contexts. In particular, these materials hold great promise for potential applications in regenerative engineering, but also serve as innovative and practical solutions as bone scaffolds and dental implants containing nano-fluorapatite. Further discussion of these properties can be found in this article, along with a discussion of their importance and potential in the field of biomedical applications. However, according to our pervious study and based on our current investigations but also based on available scientific records, it was proposed potential molecular mechanism of Rb+ ions in the process of osteoclastogenesis.

Role of Fluoride in Dentistry: A Narrative Review

Fluoride has performed a central role in the growth over the last fifty years. This report examines the present state of knowledge about fluoride's involvement in preventing dental caries. In recent years, our knowledge of the development of dental caries and the manner of operation of fluoride has been shifted. Dental caries is a constant procedure for enamel demineralization and remineralization, and fluoride plays an important part in this action by acting at the plaque-enamel contact. Fluoride's major method of action is now recognized as posteruptive. Fluoride's post-eruptive activity has led to the development of novel fluoride delivery systems. The importance of various fluoride delivery techniques on a population and societal level is discussed, along with suggestions.

Evaluation of flexural strength, degree of conversion, and demineralization-prevention properties in adjacent tooth structures of an experimental fissure sealant containing nano-calcium-phosphate compounds

BACKGROUND

The present study aimed to evaluate the flexural strength, degree of conversion, and demineralization-prevention ability of an experimental fissure sealant containing nano-calcium-phosphate compounds.

METHODS

An experimental sealant was formulated using silica and nano hydroxyapatite filler particles. The control group consisted of the DENU Seal (n = 10, each group). The flexural bond strength was evaluated by UTM. DC was evaluated by FTIR. To evaluate the demineralization-prevention ability, Cl V cavities in 10 third molar teeth restored with two sealant products, followed by an acid challenge then the Vickers microhardness test was carried out.

RESULTS

The mean flexural strength in the commercial group was higher than the experimental group. However, the mean flexural modulus was not significantly different between the two groups. In the experimental group, DC was significantly higher than the commercial group. Adjacent to the interface, the decrease in microhardness in the experimental group was significantly less than the commercial group. However, on the tooth surface, there were no significant differences between the two groups. In the experimental group, the decrease in microhardness at the interface was less than at the tooth surface, however the situation was opposite in the commercial group.

CONCLUSIONS

Incorporating hydroxyapatite into the sealant structure might prevent demineralization, without adverse effects on flexural modulus and degree of conversion.

Highly Reversible Zn Anodes Achieved by Enhancing Ion-Transport Kinetics and Modulating Zn (002) Deposition

Uncontrolled dendrite growth and water-related side reactions in mild electrolytes are the main causes of poor cycling stability of zinc anodes, resulting in the deterioration of aqueous zinc-based batteries. Herein, a multifunctional fluorapatite (Ca5(PO4)3F) aerogel (FAG) interface layer is proposed to realize highly stable zinc anodes via the integrated regulation of Zn2+ migration kinetics and Zn (002) orientation deposition. Owing to the well-defined aerogel nanochannels and the rich Zn2+ adsorption sites resulting from the ion exchange between Ca2+ and Zn2+, the FAG interface layer could significantly accelerate the Zn2+ migration and effectively homogenize the Zn2+ flux and nucleation sites, thus promoting rapid and uniform Zn2+ migration at the electrode/electrolyte interface. Additionally, during the cycling process, the F atoms from FAG promote the in situ generation of ZnF2, which facilitates the manipulation of the preferred Zn (002) orientation deposition, thus efficiently suppressing dendrite growth and side reactions by combining with the above synergistic effects. Consequently, the FAG-modified Zn anode displays a stable cycle life of over 4000 h at 1 mA cm-2 and exhibits highly reversible Zn plating/stripping behavior. Meanwhile, the Zn||MnO2 full cells exhibit improved cycle stability over 2000 cycles compared with that of the bare Zn, highlighting the virtues of the FAG protective layer for highly reversible Zn anodes. Our work brings the insight in to stabilize Zn anodes and power the commercial applications of aqueous zinc-based batteries.

Novel Remineralizing and Antibiofilm Low-Shrinkage-Stress Nanocomposites to Inhibit Salivary Biofilms and Protect Tooth Structures

Recurrent caries remain a persistent concern, often linked to microleakage and a lack of bioactivity in contemporary dental composites. Our study aims to address this issue by developing a low-shrinkage-stress nanocomposite with antibiofilm and remineralization capabilities, thus countering the progression of recurrent caries. In the present study, we formulated low-shrinkage-stress nanocomposites by combining triethylene glycol divinylbenzyl ether and urethane dimethacrylate, incorporating dimethylaminododecyl methacrylate (DMADDM), along with nanoparticles of calcium fluoride (nCaF2) and nanoparticles of amorphous calcium phosphate (NACP). The biofilm viability, biofilm metabolic activity, lactic acid production, and ion release were evaluated. The novel formulations containing 3% DMADDM exhibited a potent antibiofilm activity, exhibiting a 4-log reduction in the human salivary biofilm CFUs compared to controls (p < 0.001). Additionally, significant reductions were observed in biofilm biomass and lactic acid (p < 0.05). By integrating both 10% NACP and 10% nCaF2 into one formulation, efficient ion release was achieved, yielding concentrations of 3.02 ± 0.21 mmol/L for Ca, 0.5 ± 0.05 mmol/L for P, and 0.37 ± 0.01 mmol/L for F ions. The innovative mixture of DMADDM, NACP, and nCaF2 displayed strong antibiofilm effects on salivary biofilm while concomitantly releasing a significant amount of remineralizing ions. This nanocomposite is a promising dental material with antibiofilm and remineralization capacities, with the potential to reduce polymerization-related microleakage and recurrent caries.

In vitro evaluation of a novel fluoride-coated clear aligner with antibacterial and enamel remineralization abilities

OBJECTIVE

To investigate the antibacterial and enamel remineralization performances as well as physicochemical properties and biocompatibility of a fluoride-coated clear aligner plastic (FCAP).

MATERIALS AND METHODS

FCAP and normal clear aligner plastic (CAP) was bought from the manufacturer (Angelalign Technology Inc, China). The FCAP was observed under scanning electron microscopy. Its element composition, resistance to separation, contact angle, and protein adhesion performance were characterized. Colony-forming unit (CFU) count and 3-(4,5)-dimethylthiazol(-z-y1)-3,5-diphenyltetrazolium bromide (MTT) assay were used to evaluate the antibacterial ability of Streptococcus mutans. Fluoride release-recharge patterns were obtained. Apatite formation was evaluated after immersing FCAP in artificial saliva. Enamel remineralization capability was evaluated in the demineralization model (immersing samples in demineralization solution for 36 h) and pH cycling model (immersing samples in demineralization solution and remineralization solution in turns for 14 days). Cell Counting Kit-8 (CCK-8) and live/dead cell staining kits were used for cytotoxicity assay.

RESULTS

The FCAP showed uniformly distributed fluoride and did not compromise protein adhesion performance. CFU count (5.47 ± 0.55 for CAP, 3.63 ± 0.38 for FCAP) and MTT assay (0.41 ± 0.025 for CAP, 0.28 ± 0.038) indicated that the FCAP had stronger antibacterial activity compared with normal CAP (P < 0.05 for both evaluations). The FCAP could release fluoride continuously for 14 days and could be recharged after immersing in NaF solution. The FCAP could induce the formation of hydroxyapatite in artificial saliva and could reduce the microhardness decrease, color change, and mineral loss of enamels in both two models (P < 0.05 for all evaluations). CCK-8 and live/dead cell staining analyses showed that the coating did not compromise the biocompatibility of the clear aligner (P > 0.05 for CCK-8 evaluation).

CONCLUSIONS

The FCAP had antibacterial, fluoride recharge, and enamel remineralization abilities while it did not compromise physicochemical properties and biocompatibility.

CLINICAL RELEVANCE

The FCAP has the potential to prevent enamel demineralization during clear aligner treatment.

Biomimetic hydroxyapatite paste for molar-incisor hypomineralization: A randomized clinical trial

OBJECTIVES

The aim of this randomized clinical trial was to evaluate the desensitizing and remineralizing effect of a new zinc-hydroxyapatite-based paste in sites affected by molar-incisor hypomineralization (MIH), by assessing dental sensitivity, tooth wear, and periodontal indexes.

MATERIALS AND METHODS

Twenty-five patients with presence of 1 enamel demineralization of permanent molars and incisors in two different quadrants were recruited. After professional dental hygiene, a domiciliary hydroxyapatite-based paste was assigned and recommended to be applied on 2 MIH teeth in one random quadrant (test group), while the 2 contralateral MIH teeth did not undergo paste application (control group). The following primary outcomes were assessed: Plaque Control Record (PCR), Bleeding Index (BI), MIH Treatment Need Index (MIH-TNI), and Schiff Air Index (SAI).

RESULTS

No significant inter- and intragroup differences were found for PI and BI, except for both intragroup T0-T1. For MIH-TNI, significant intergroup differences were detectable in the test group after 9 months of treatment. For SAI values, no significant differences were found in the control group, while in the test group, significant lower values were found after 1 and 3 months since baseline, respectively.

CONCLUSIONS AND CLINICAL RELEVANCE

Biomimetic zinc-hydroxyapatite showed a desensitizing effect when used to treat MIH.

Advanced applications of strontium-containing biomaterials in bone tissue engineering

Strontium (Sr) and strontium ranelate (SR) are commonly used therapeutic drugs for patients suffering from osteoporosis. Researches have showed that Sr can significantly improve the biological activity and physicochemical properties of materials in vitro and in vivo. Therefore, a large number of strontium containing biomaterials have been developed for repairing bone defects and promoting osseointegration. In this review, we provide a comprehensive overview of Sr-containing biomaterials along with the current state of their clinical use. For this purpose, the different types of biomaterials including calcium phosphate, bioactive glass, and polymers are discussed and provided future outlook on the fabrication of the next-generation multifunctional and smart biomaterials.

Composite grafts made of polycaprolactone fiber mats and oil-based calcium phosphate cement pastes for the reconstruction of cranial and maxillofacial defects

OBJECTIVES

Synthetic bone substitutes which can be adapted preoperatively and patient specific may be helpful in various bony defects in the field of oral- and maxillofacial surgery. For this purpose, composite grafts made of self-setting and oil-based calcium phosphate cement (CPC) pastes, which were reinforced with 3D-printed polycaprolactone (PCL) fiber mats were manufactured.

MATERIALS AND METHODS

Bone defect models were acquired using patient data from real defect situations of patients from our clinic. Using a mirror imaging technique, templates of the defect situation were fabricated via a commercially available 3D-printing system. The composite grafts were assembled layer by layer, aligned on top of these templates and fitted into the defect situation. Besides, PCL-reinforced CPC samples were evaluated regarding their structural and mechanical properties via X-ray diffraction (XRD), infrared (IR) spectroscopy, scanning electron microscopy (SEM), and 3-point-bending testing.

RESULTS

The process sequence including data acquisition, template fabrication, and manufacturing of patient specific implants proved to be accurate and uncomplicated. The individual implants consisting mainly of hydroxyapatite and tetracalcium phosphate displayed good processability and a high precision of fit. The mechanical properties of the CPC cements in terms of maximum force and stress load to material fatigue were not negatively affected by the PCL fiber reinforcement, whereas clinical handling properties increased remarkably.

CONCLUSION

PCL fiber reinforcement of CPC cements enables the production of very freely modelable three-dimensional implants with adequate chemical and mechanical properties for bone replacement applications.

CLINICAL RELEVANCE

The complex bone morphology in the region of the facial skull often poses a great challenge for a sufficient reconstruction of bony defects. A full-fledged bone replacement here often requires the replication of filigree three-dimensional structures partly without support from the surrounding tissue. With regard to this problem, the combination of smooth 3D-printed fiber mats and oil-based CPC pastes represents a promising method for fabricating patient specific degradable implants for the treatment of various craniofacial bone defects.

Micromechanical interlocking structure at the filler/resin interface for dental composites: a review

Dental resin composites (DRCs) are popular materials for repairing caries or dental defect, requiring excellent properties to cope with the complex oral environment. Filler/resin interface interaction has a significant impact on the physicochemical/biological properties and service life of DRCs. Various chemical and physical modification methods on filler/resin interface have been introduced and studied, and the physical micromechanical interlocking caused by the modification of fillers morphology and structure is a promising method. This paper firstly introduces the composition and development of DRCs, then reviews the chemical and physical modification methods of the filler/resin interface, mainly discusses the interface micromechanical interlocking structures and their enhancement mechanism for DRCs, finally give a summary on the existing problems and development potential.

Inorganic Compounds as Remineralizing Fillers in Dental Restorative Materials: Narrative Review

Secondary caries is one of the leading causes of resin-based dental restoration failure. It is initiated at the interface of an existing restoration and the restored tooth surface. It is mainly caused by an imbalance between two processes of mineral loss (demineralization) and mineral gain (remineralization). A plethora of evidence has explored incorporating several bioactive compounds into resin-based materials to prevent bacterial biofilm attachment and the onset of the disease. In this review, the most recent advances in the design of remineralizing compounds and their functionalization to different resin-based materials' formulations were overviewed. Inorganic compounds, such as nano-sized amorphous calcium phosphate (NACP), calcium fluoride (CaF₂), bioactive glass (BAG), hydroxyapatite (HA), fluorapatite (FA), and boron nitride (BN), displayed promising results concerning remineralization, and direct and indirect impact on biofilm growth. The effects of these compounds varied based on these compounds' structure, the incorporated amount or percentage, and the intended clinical application. The remineralizing effects were presented as direct effects, such as an increase in the mineral content of the dental tissue, or indirect effects, such as an increase in the pH around the material. In some of the reported investigations, inorganic remineralizing compounds were combined with other bioactive agents, such as quaternary ammonium compounds (QACs), to maximize the remineralization outcomes and the antibacterial action against the cariogenic biofilms. The reviewed literature was mainly based on laboratory studies, highlighting the need to shift more toward testing the performance of these remineralizing compounds in clinical settings.

Analysis of Dental Enamel Remineralization: A Systematic Review of Technique Comparisons

The demineralization process conditions the structure of the enamel and begins with a superficial decalcification procedure that makes the enamel surface porous and gives it a chalky appearance. White spot lesions (WSLs) are the first clinical sign that can be appreciated before caries evolves into cavitated lesions. The years of research have led to the testing of several remineralization techniques. This study's objective is to investigate and assess the various methods for remineralizing enamel. The dental enamel remineralization techniques have been evaluated. A literature search on PubMed, Scopus, and Web of Science was performed. After screening, identification, and eligibility processes 17 papers were selected for the qualitative analysis. This systematic review identified several materials that, whether used singly or in combination, can be effective in the process of remineralizing enamel. All methods have a potential for remineralization when they come into contact with tooth enamel surfaces that have early-stage caries (white spot lesions). From the studies conducted in the test, all of the substances used to which fluoride has been added contribute to remineralization. It is believed that by developing and researching new remineralization techniques, this process might develop even more successfully.

Ceramic Materials for Biomedical Applications: An Overview on Properties and Fabrication Processes

A growing interest in creating advanced biomaterials with specific physical and chemical properties is currently being observed. These high-standard materials must be capable to integrate into biological environments such as the oral cavity or other anatomical regions in the human body. Given these requirements, ceramic biomaterials offer a feasible solution in terms of mechanical strength, biological functionality, and biocompatibility. In this review, the fundamental physical, chemical, and mechanical properties of the main ceramic biomaterials and ceramic nanocomposites are drawn, along with some primary related applications in biomedical fields, such as orthopedics, dentistry, and regenerative medicine. Furthermore, an in-depth focus on bone-tissue engineering and biomimetic ceramic scaffold design and fabrication is presented.

In vitro and in vivo evaluation of surface functionalization of titanium with H2 O2 hydrothermal treatment and FGF-2

The goals of the study were to investigate the effects on bone bioactivity of a titanium dioxide layer formed by hydrothermal oxidation of a titanium surface with hydrogen peroxide (H₂ O₂ ) and loading with fibroblast growth factor-2 (FGF-2) in vitro and in vivo. Ti-6Al-4V discs were hydrothermally oxidized with H₂ O₂ and then loaded with FGF-2. After cytotoxicity testing, Ti-6Al-4V mini-implants were subjected to the same treatment, and their osteogenic potential was evaluated histologically in a rat model. H₂ O₂ hydrothermal oxidation resulted in a dense porous network structure and hydrophilic changes, which improved retention of FGF-2. Morphologically, the cell density was higher, cell elongation was more pronounced, and the cell adhesion area was significantly higher in FGF-2-loaded cells than in those without FGF-2. In a cell proliferation assay using mouse osteoblast-like cells, absorbance tended to increase over time, especially in the FGF-2 group after 7 and 14 days, and in a bone differentiation assay based on ALP activity, there was a significant increase in the FGF-2 group after 14 days. In the rat model, H₂ O₂ hydrothermal oxidation and FGF-2 loading both resulted in more laminar bone tissue in the bone marrow around the mini-implant. These results suggest that titanium surface functionalization by H₂ O₂ hydrothermal oxidation and FGF-2 may promote initial cell adhesion, proliferation, and osteodifferentiation, and enhance bone bioactivity. These effects all contribute to early bonding of an implant with the surrounding bone.

Nanocrystalline fluorapatite mineralization in the calciphile rock-boring bivalve Lithophaga: functional and phylogenetic significance

Phosphate mineralization as a skeletal material is uncommon in invertebrate animals and rare in Mollusca. Remarkably, apatite minerals were first reported more than 30 years ago in the periostracum of two species of the mytilid bivalve Lithophaga where shells are mostly constructed of calcium carbonate. This discovery extended the range of biominerals secreted by molluscs but has attracted no subsequent research. In this study we review the occurrence of phosphate mineralization in Lithophaga and putatively allied taxa. Lithophagine bivalves, particularly Lithophaga and the more diverse Leiosolenus species, are well known for their endolithic chemical dissolution of calcareous rocks and corals with calcium-binding lipoproteins secreted by mantle glands. Fluorapatite was identified by X-ray diffraction in an outer layer of the periostracum in six species of Lithophaga. Morphological study by scanning electron microscopy of four species showed the fluorapatite crystals embedded in periostracal material in a layer 10–20 µm thick. Dilute bleach treatment revealed the crystals as densely packed euhedral prisms 250–400 nm in size. The succeeding inner layers of the periostracum were unmineralized. Observations of the developing periostracum of Lithophaga teres suggest that the initial mineralization is in the form of amorphous granules that coalesce and transform into euhedral crystals. Periostracal phosphate was not recorded in other members of the Lithophaginae – Leiosolenus, Botula or Zelithophaga species. Leiosolenus species characteristically have extraperiostracal aragonitic encrustations that can be thick and structurally complex. Published molecular phylogenies of Mytilidae bivalves show a division into two major clades with Lithophaga species in one clade and Leiosolenus species in the other, indicating that the subfamily Lithophaginae as presently understood is polyphyletic. This result implies that the two genera have independent evolutionary pathways to endolithic occupation of calcareous substrates although using similar mantle gland secretions to excavate their crypts. Because fluorapatite is considerably less soluble and harder than calcium carbonate, it is suggested that the phosphate layer of Lithophaga is a functional adaptation to protect their shells from self-dissolution from their rock-dissolving glandular secretions and may also act as defence against other shell-eroding organisms.

Fluoridated Apatite Coating on Human Dentin via Laser-Assisted Pseudo-Biomineralization with the Aid of a Light-Absorbing Molecule

A simple, area-specific coating technique for fluoridated apatite (FAp) on teeth would be useful in dental applications. Recently, we achieved area-specific FAp coating on a human dentin substrate within 30 min by a laser-assisted biomimetic (LAB) process; pulsed Nd:YAG laser irradiation in a fluoride-containing supersaturated calcium phosphate solution (FCP solution). The LAB-processed, FAp-coated dentin substrate exhibited antibacterial activity against a major oral bacterium, Streptococcus mutans. In the present study, we refined the LAB process with a combination of a dental diode laser and a clinically approved light-absorbing molecule, indocyanine green (ICG). A micron-thick FAp layer was successfully formed on the dentin surface within only 3 min by the refined LAB process, i.e., dental diode laser irradiation in the FCP solution following ICG treatment. The ICG layer precoated on the dentin substrate played a crucial role in inducing rapid pseudo-biomineralization (FAp layer formation) on the dentin surface by absorbing laser light at the solid-liquid interface. In the refined LAB process, the precoated ICG layer was eliminated and replaced with the newly formed FAp layer composed of vertically oriented pillar-like nanocrystals. Cross-sectional ultrastructural analysis revealed a smooth interface between the FAp layer and the dentin substrate. The refined LAB process has potential as a tool for the tooth surface functionalization and hence, is worth further process refinement and in vitro and in vivo studies.

Characterization of Transparent Fluorapatite Ceramics Fabricated by Spark Plasma Sintering

Highly optically transparent polycrystalline fluorapatite ceramics with hexagonal crystal structures were fabricated via a liquid-phase synthesis of fluorapatite powder, followed by spark plasma sintering (SPS). The effect of sintering temperature, as observed using a thermopile, on the optical transmittance and microstructure of the ceramics was investigated in order to determine suitable sintering conditions. As a result, high optical transmittance was obtained in the SPS temperature range of 950-1100 °C. The highest optical transmittance was obtained for the ceramic sample sintered at 1000 °C, and its average grain size was evaluated at only 134 nm. The grain size dramatically increased with temperature, and the ceramics became translucent at SPS temperatures above 1200 °C. The mechanical and thermal properties of the ceramics were measured to evaluate the thermal shock parameter, which was found to be comparable to or slightly smaller than that of single-crystal fluorapatite. This transparent polycrystalline fluorapatite ceramic material should prove useful in a wide range of applications, for example as a biomaterial or optical/laser material, in the future. Furthermore, the knowledge obtained in this study should help to promote the application of this ceramic material.

Hydrothermal Synthesis of Fluorapatite Coatings over Titanium Implants for Enhanced Osseointegration-An In Vivo Study in the Rabbit

This work aims at the development and characterization of fluorapatite coatings, innovatively prepared by the hydrothermal method, aiming for enhanced osseointegration of titanium implants. Fluoride-containing coatings were prepared and characterized by scanning and transmission electron microscopy, Fourier-transform infrared spectroscopy-attenuated total reflectance, and X-ray photoelectron spectroscopy. The biological response was characterized by microtomographic evaluation and histomorphometric analysis upon orthotopic implantation in a translational rabbit experimental model. Physic-chemical analysis revealed the inclusion of fluoride in the apatite lattice with fluorapatite formation, associated with the presence of citrate species. The in vivo biological assessment of coated implants revealed an enhanced bone formation process-with increased bone-to-implant contact and bone volume. The attained enhancement of the osteogenic process may be attributable to the conjoined modulatory activity of selected fluoride and citrate levels within the produced coatings. In this regard, the production of fluorapatite coatings with citrate, through the hydrothermal method, entails a promising approach for enhanced osseointegration in implant dentistry and orthopedic applications.

Sustained antibacterial coating with graphene oxide ultrathin film combined with cationic surface-active agents in a wet environment

Antimicrobial surfactants contained in mouthrinse have excellent efficacy, but are not retained on the tooth surface (are rinsed away) due to their low water resistance and thus do not exhibit sustained antibacterial activity. We have developed a new coating method using graphene oxide (GO) that retains the surfactant on the tooth surface even after rinsing with water, thus providing a sustained antibacterial effect. Ultra-thin films of GO and an antimicrobial agent were prepared by (1) applying GO to the substrate surface, drying, and thoroughly rinsing with water to remove excess GO to form an ultrathin film (almost a monolayer, transparent) on the substrate surface, then (2) applying antimicrobial cationic surface active agents (CSAAs) on the GO film to form a composite coating film (GO/CSAA). GO/CSAA formation was verified by scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and ζ-potential and contact angle measurements. GO/CSAA was effective at inhibiting the growth of oral pathogens for up to 7 days of storage in water, and antibacterial activity was recovered by reapplication of the CSAA. Antibacterial GO/CSAA films were also formed on a tooth substrate. The results suggest that GO/CSAA coatings are effective in preventing oral infections.

Remineralization of Artificially Demineralized Human Enamel and Dentin Samples by Zinc-Carbonate Hydroxyapatite Nanocrystals

(1) Background: Decalcified enamel and dentin surfaces can be regenerated with non-fluoride-containing biomimetic systems. This study aimed to investigate the effect of a zinc carbonate-hydroxyapatite-containing dentifrice on artificially demineralized enamel and dentin surfaces. (2) Methods: Human enamel and dentin discs were prepared and subjected to surface demineralization with 30% orthophosphoric acid for 60 s. Subsequently, in the test group (n = 20), the discs were treated three times a day for 3 min with a zinc carbonate-hydroxyapatite-containing toothpaste (biorepair^®). Afterwards, all samples were gently rinsed with PBS (5 s) and stored in artificial saliva until next use. Samples from the control group (n = 20) received no dentifrice-treatment and were stored in artificial saliva, exclusively. After 15 days of daily treatment, specimens were subjected to Raman spectroscopy, energy-dispersive X-ray micro-analysis (EDX), white-light interferometry, and profilometry. (3) Results: Raman spectroscopy and white-light interferometry revealed no significant differences compared to the untreated controls. EDX analysis showed calcium phosphate and silicon dioxide precipitations on treated dentin samples. In addition, treated dentin surfaces showed significant reduced roughness values. (4) Conclusions: Treatment with biorepair^® did not affect enamel surfaces as proposed. Minor mineral precipitation and a reduction in surface roughness were detected among dentin surfaces only.

Bioactive Inorganic Materials for Dental Applications: A Narrative Review

Over time, much attention has been given to the use of bioceramics for biomedical applications; however, the recent trend has been gaining traction to apply these materials for dental restorations. The bioceramics (mainly bioactive) are exceptionally biocompatible and possess excellent bioactive and biological properties due to their similar chemical composition to human hard tissues. However, concern has been noticed related to their mechanical properties. All dental materials based on bioactive materials must be biocompatible, long-lasting, mechanically strong enough to bear the masticatory and functional load, wear-resistant, easily manipulated, and implanted. This review article presents the basic structure, properties, and dental applications of different bioactive materials i.e., amorphous calcium phosphate, hydroxyapatite, tri-calcium phosphate, mono-calcium phosphate, calcium silicate, and bioactive glass. The advantageous properties and limitations of these materials are also discussed. In the end, future directions and proposals are given to improve the physical and mechanical properties of bioactive materials-based dental materials.

A new hydrogel with fluorapatite nanoparticles for osteogenic differentiation of human adipose-derived stem cells in tissue engineering field

Since scaffolds are engineered to support functional tissue formation, their design and materials play an essential role in medical fields by providing different mechanical function. The aim of this study was to investigate the synthesis and structural characterization of collagen-gelatin (COL-GEL) composite scaffolds containing fluorapatite (FA) nanoparticles as well as evaluation of the osteogenic differentiation of human adipose-derived stem cells (hADSCs). First, the composite scaffolds were evaluated using Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. The cytotoxicity of scaffolds and various concentrations of FA nanoparticles was studied through MTT assay and acridine orange/ethidium bromide staining. Next, the differentiated hADSCs were analyzed using Alizarin red and von Kossa staining, calcium content assay, alkaline phosphatase (ALP) activity, real-time RT-PCR, and immunocytochemical analyses. According to the characterization analyses, the composite scaffolds were properly integrated. The results also illustrated that COL-GEL composite scaffolds in the presence of FA nanoparticles not only showed no cytotoxicity but also increased ALP activity and calcium deposition as well as the expression of osteogenic genes, including Runx2, Col-I, ALP, and osteocalcin and the synthesis of proteins such as osteocalcin and osteopontin in vitro. The obtained data were confirmed by Alizarin red and von Kossa staining. These results are very promising for further tissue engineering experiments, in which FA nanoparticle incorporation into COL-GEL composite scaffolds is a novel approach that improves the surface COL-GEL composite scaffolds for tissue engineering application in vitro.

Biological and Physico-Chemical Properties of Composite Layers Based on Magnesium-Doped Hydroxyapatite in Chitosan Matrix

In the present study, we report the development and characterization of composite layers (by spin coating) based on magnesium-doped hydroxyapatite in a chitosan matrix, (Ca_10-xMg_x(PO₄)₆(OH)₂; x_Mg = 0, 0.08 and 0.3; HApCh, 8MgHApCh and 30MgHApCh). The MgHApCh composite layers were investigated using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS) techniques. The in vitro biological evaluation included the assessment of their cytotoxicity on MG63 osteoblast-like cells and antifungal activity against Candida albicans ATCC 10231 fungal cell lines. The results of the physico-chemical characterization highlighted the obtaining of uniform and homogeneous composite layers. In addition, the biological assays demonstrated that the increase in the magnesium concentration in the samples enhanced the antifungal effect but also decreased their cytocompatibility. However, for certain optimal magnesium ion concentrations, the composite layers presented both excellent biocompatibility and antifungal properties, suggesting their promising potential for biomedical applications in both implantology and dentistry.

Physicochemical Properties and Surface Characteristics of Ground Human Teeth

Enamel, dentin and cementum apatite has a complex composition. The lack of complete reports on the chemical composition of all tooth tissues together and the need to create a modern biomaterial that reproduces the correct ratio of individual tooth mineral components prompted the authors to undertake the research. A detailed evaluation of the micro- and macro-elements of tooth powder, using various methods of chemical analysis was conducted. All four groups of human sound teeth were crushed using the grinder. A fine powder was implemented for the FTIR (Fourier Transform Infrared Spectroscopy), ICP (Inductively Coupled Plasma Optical Emission Spectometry) and for the potentiometric titration, SEM and mercury porosimetry analyses. The obtained studies indicate that there is no significant correlation in chemical composition between the different teeth types. This proves that every removed, crushed tooth free of microorganisms can be a suitable material for alveolar augmentation. It is essential to know the chemical profiles of different elements in teeth to develop a new class of biomaterials for clinical applications.

TiO2 nanoparticles added to dense bovine hydroxyapatite bioceramics increase human osteoblast mineralization activity

OBJECTIVES

This study evaluated the effect of TiO₂ nanoparticles + dense hydroxyapatite (HA) on human osteoblast cells (SAOS-2).

METHODS

Particulate bovine HA powder with or without the addition of either 5 or 8 % TiO₂ (HA, HA/TiO₂Np5 % or HA/TiO₂Np8 %) were pressed into disks (Ø = 12.5 mm; thickness = 1.3 mm) uniaxially (100 MPa) and isostatically (200 MPa/1 min) and sintered at 1300 °C. Y-TZP disks were used as control. The following tests were performed: Scanning Electron Microscopy and Dispersive Energy Spectroscopy (SEM/EDS), Atomic Force Microscopy (AFM), cell viability assay (Alamar Blue-AB) and mineralized matrix deposition (Alizarin Red-AR). AB and AR data were submitted to 2-way ANOVA/Tukey tests and ANOVA/Tukey tests, respectively.

RESULTS

SEM revealed that the surface of HA/TiO₂Np5% resembles DPBHA surface, but also contains smaller granules. HA/TiO₂Np8% characteristics resembles HA/TiO₂Np5% surface, but with irregular topography. Y-TZP showed a typical oxide ceramic surface pattern. EDS revealed Ca, O, and P in all samples. C, O, and Zr appeared in Y-TZP samples. AFM data corroborates SEM analysis. AB test revealed excellent cellular viability for HA/TiO₂Np5% group. AR test showed that all groups containing TiO₂np had more mineralized matrix deposition than all other groups, with statistically differences between HA/TiO₂Np8% and HA cultivated in non-osteogenic medium. Culture in osteogenic medium exhibited much more mineralized matrix deposition by TiO₂np groups.

SIGNIFICANCE

In conclusion, the addition of TiO₂np showed chemical, superficial, and biological changes in the reinforced materials. HA/TiO₂Np5% showed the best results for cell viability and HA/TiO₂Np8% for mineralized matrix deposition.

Hydrothermal Synthesis and In Vivo Fluorescent Bioimaging Application of Eu3+/Gd3+ Co-Doped Fluoroapatite Nanocrystals

In this study, Eu3+/Gd3+ co-doped fluoroapatitååe (Eu/Gd:FAP) nanocrystals were synthesized by the hydrothermal method as a fluorescent bioimaging agent. The phase composition, morphology, fluorescence, and biosafety of the resulting samples were characterized. Moreover, the in vivo fluorescent bioimaging application of Eu/Gd:FAP nanocrystals was evaluated in mice with subcutaneously transplanted tumors. The results showed that the Eu/Gd:FAP nanocrystals were short rod-like particles with a size of 59.27 ± 13.34 nm × 18.69 ± 3.32 nm. With an increasing F substitution content, the Eu/Gd:FAP nanocrystals displayed a decreased size and enhanced fluorescence emission. Eu/Gd:FAP nanocrystals did not show hemolysis and cytotoxicity, indicating good biocompatibility. In vivo fluorescent bioimaging study demonstrated that Eu/Gd:FAP nanocrystals could be used as a bioimaging agent and displayed stable fluorescence emitting in tumors, indicating an accumulation in tumor tissue due to the passive targeting ability. In addition, any adverse effects of Eu/Gd:FAP nanocrystals on major organs were not observed. This study shows that biocompatible rare earth co-doped FAP nanocrystals have the potential to be used as a bioimaging agent in vivo.

Long-term evaluation of early-enamel lesions treated with novel experimental tricalcium silicate paste: A 2-year randomized clinical trial

OBJECTIVE

The aim of the current study is to evaluate the remineralization potential of experimental tricalcium silicate (TCS) paste in comparison with more popular remineralizing agents like silver diamine fluoride potassium iodide (SDF-KI) and casein phosphopeptide amorphous calcium phosphate (CPP-ACP) on early enamel lesions.

MATERIALS AND METHODS

Forty-five patients in the age range of 15-50 years had early enamel lesions on the buccal surface of molar teeth. The patients were randomly divided into three treatment groups (SDF-KI, CPP-ACP, and TCS group) with 15 patients per group. Lesions were evaluated clinically by DIAGNOdent pen immediately and after 3,6,12, and 24 months of treatment.

RESULTS

The study was completed with 45 patients and 92 teeth. Twice-daily application of CPP-ACP and TCS paste showed a significant remineralization effect on early enamel lesions after 24 months (p < 0.001). Also, annual application of SDF-KI showed a significant remineralization effect after 24 months (p < 0.001). There was a significant difference between (SDF-KI and CPP-ACP) and (SDF-KI and TCS) at the different follow-up periods 3,6,12, and 24 months (p < 0.001). Meanwhile, there was no significant difference between CPP-ACP and TCS at the mentioned follow-up periods (p > 0.05).

CONCLUSION

TCS showed potential remineralization for early enamel lesions.

CLINICAL RELEVANCE

Experimental TCS is a promising remineralizing agent for management of early enamel lesions.

Strategies and Challenges in the Treatment of Dental Enamel

Enamel tissue, the hardest body tissue, which covers the outside of the tooth shields the living tissue, but it erodes and disintegrates in the acidic environment of the oral cavity. On the one hand, mature enamel is cell-free and, if damaged, does not regenerate. Tooth sensitivity and decay are caused by enamel loss. On the other hand, the tissue engineering approach is challenging because of the unique structure of tooth enamel. To develop an exemplary method for dental enamel rebuilding, accurate knowledge of the structure of tooth enamel, knowing how it is created and how proteins interact in its structure, is critical. Furthermore, novel techniques in tissue engineering for using stem cells to develop enamel must be established. This article aims to discuss current attempts to regenerate enamel using synthetic materials methods, recent advances in enamel tissue engineering, and the prospects of enamel biomimetics to find unique insights into future possibilities for repairing enamel tissue, perhaps the most fascinating of all tooth tissues.

Effect of a Self-Assembly Peptide on Surface Roughness and Hardness of Bleached Enamel

After bleaching, enamel surfaces are damaged, contributing to erosion and tooth sensitivity. Although fluoride is used after bleaching to try and revert alterations, it is not capable of repairing tooth structure. This study compared the effect of a self-assembly peptide (P11-4), with and without fluoride, and sodium fluoride (NaF 2%) on the Knoop microhardness (KHN) and surface roughness (Ra (μm)) of bleached enamel with an in-office bleaching regimen. Enamel blocks of bovine teeth (5 × 5 × 2 mm) with standardized surface hardness were bleached with 35% carbamide peroxide, following the manufacturer’s instructions. The teeth were randomly divided into the following groups (n = 7) according to post-bleaching treatment: no treatment (negative control) (C-); 2% NaF (NaF); Curodont™ Repair (Repair); and Curodont™ Protect (Protect). Specimens were stored in artificial saliva at 37 °C. To evaluate the effect of the post-bleaching treatments, KHN and Ra were measured before bleaching (baseline) and 24 h and 7 days after bleaching. Data were submitted to repeated measures ANOVA and Bonferroni tests (α = 0.05). There were significant interactions between the study factors (p = 0.001). After 7 days, Repair (572.50 ± 79.04) and Protect (583.00 ± 74.76) specimens showed increased surface KHN, with values higher than the NaF (465.50 ± 41.50) and C- (475.22 ± 58.95) baseline values. There was no significant difference in KHN at 24 h among groups (p = 0.587). At 24 h after bleaching, Repair was significantly different from all groups (p < 0.05). Repair showed the lowest Ra (μm) values (0.133 ± 0.035). After seven days, there was no significant difference in Ra values among groups when compared to the baseline. The use of P11-4-based materials after bleaching resulted in the fastest recovery to baseline enamel properties.

Combined Effects of Topical Fluorides and Semiconductor Lasers on Prevention of Enamel Caries: A Systematic Review and Meta-Analysis

Objective: To compare the effects of combined treatment of topical fluoride and semiconductor laser (F&L) with topically using fluoride (F) on remineralization and prevention of enamel caries. Background: There is no agreement on whether semiconductor lasers can promote the effect of topical fluoride on the remineralization and prevention of dental caries. This study is the first systematic review and meta-analysis to investigate the pooled effect of data from studies that compared the combined use of semiconductor lasers and topical fluorides with the single use of fluoride on remineralization and prevention of caries. Methods: We performed literature search on Scopus, Web of Science, and PubMed. The keywords were as follows: ((diode lasers) OR (diode laser) OR (quantum cascade laser) OR (quantum cascade lasers) OR (Gallium Aluminum Arsenide lasers) OR (Gallium Aluminum Arsenide laser) OR (GaAlAs lasers) OR (GaAlAs Laser) OR (semiconductor laser) OR (semiconductor lasers)) AND ((caries) OR (dental caries) OR (remineralisation) OR (remineralization) OR (demineralization) OR (demineralisation)) AND fluoride. We carried out meta-analysis to compare the microhardness of demineralized enamel, lesion depth (LD), and percent reduction of calcium (Ca%) of sound enamel receiving F&L with F. Results: The search identified nine laboratory studies, which used 445 to 980 nm semiconductor lasers with various fluorides. The standard mean difference of microhardness of demineralized enamel between F&L and F was 1.06 [95% confidence interval (CI): 0.12 to 2.00, p = 0.03]. No difference was found in LD (95% CI: -1.63 to 0.10, p = 0.08) and Ca% (95% CI: -0.52 to 1.28, p = 0.40) on sound enamel between the two groups. Conclusions: Semiconductor lasers enhance the effect of fluoride on remineralizing but not on preventing enamel caries. Moreover, substantial heterogeneity was found among the studies, and the results should be interpreted cautiously.

Synthetic microbiology applications powered by light

Synthetic biology is a field of research in which molecular parts (mostly nucleic acids and proteins) are de novo created or modified and then used either alone or in combination to achieve new functions that can help solve the problems of our modern society. In synthetic microbiology, microbes are employed rather than other organisms or cell-free systems. Optogenetics, a relatively recently established technology that relies on the use of genetically encoded photosensitive proteins to control biological processes with high spatiotemporal precision, offers the possibility to empower synthetic (micro)biology applications due to the many positive features that light has as an external trigger. In this review, we describe recent synthetic microbiology applications that made use of optogenetics after briefly introducing the molecular mechanism behind some of the most employed optogenetic tools. We highlight the power and versatility of this technique, which opens up new horizons for both research and industry.

Recent Advances in Direct Adhesive Restoration Resin-Based Dental Materials With Remineralizing Agents

Resin-based dental materials are popular restorative materials especially in direct adhesive restoration because of the excellent mechanical and esthetic properties. Toward the realization of minimally invasive dental procedures, direct composite resin adhesive restoration has become the main treatment for dental defects. In addition, for caries-affected dentin close to the pulp, conservation remineralization has been advocated to save the living pulp. However, the resin–dentin interface can be destabilized by various factors, especially the enzymatic degradation of collagen fibrils within the hybrid layer and polymer hydrolysis. Furthermore, for resin-based restorative materials, the marginal gap remains a major problem that can lead to the occurrence of secondary caries. To address these issues, research efforts have focused on the remineralization of mineral-depleted dental hard tissues using remineralizing bioactive substances. In this review, we first described various bioactive agents with remineralizing properties. Furthermore, we discussed recent advances in resin-based dental materials for enamel or dentin remineralization. Finally, we examined the current challenges and prospects of these emerging materials. This work aims to provide a theoretical foundation for the future development of resin-based dental materials in direct adhesive restoration with remineralizing agents.

Demineralized Dentin Matrix for Dental and Alveolar Bone Tissues Regeneration: An Innovative Scope Review

Background:

Dentin is a permeable tubular composite and complex structure, and in weight, it is composed of 20% organic matrix, 10% water, and 70% hydroxyapatite crystalline matrix. Demineralization of dentin with gradient concentrations of ethylene diamine tetraacetic acid, 0.6 N hydrochloric acid, or 2% nitric acid removes a major part of the crystalline apatite and maintains a majority of collagen type I and non-collagenous proteins, which creates an osteoinductive scaffold containing numerous matrix elements and growth factors. Therefore, demineralized dentin should be considered as an excellent naturally-derived bioactive material to enhance dental and alveolar bone tissues regeneration.

Method:

The PubMed and Midline databases were searched in October 2021 for the relevant articles on treated dentin matrix (TDM)/demineralized dentin matrix (DDM) and their potential roles in tissue regeneration.

Results:

Several studies with different study designs evaluating the effect of TDM/DDM on dental and bone tissues regeneration were found. TDM/DDM was obtained from human or animal sources and processed in different forms (particles, liquid extract, hydrogel, and paste) and different shapes (sheets, slices, disc-shaped, root-shaped, and barrier membranes), with variable sizes measured in micrometers or millimeters, demineralized with different protocols regarding the concentration of demineralizing agents and exposure time, and then sterilized and preserved with different techniques. In the act of biomimetic acellular material, TDM/DDM was used for the regeneration of the dentin-pulp complex through direct pulp capping technique, and it was found to possess the ability to activate the odontogenic differentiation of stem cells resident in the pulp tissues and induce reparative dentin formation. TDM/DDM was also considered for alveolar ridge and maxillary sinus floor augmentations, socket preservation, furcation perforation repair, guided bone, and bioroot regenerations as well as bone and cartilage healing.

Conclusion:

To our knowledge, there are no standard procedures to adopt a specific form for a specific purpose; therefore, future studies are required to come up with a well-characterized TDM/DDM for each specific application. Likely as decellularized dermal matrix and prospectively, if the TDM/DDM is supplied in proper consistency, forms, and in different sizes with good biological properties, it can be used efficiently instead of some widely-used regenerative biomaterials.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13770-022-00438-4.

Characterisation of Selected Materials in Medical Applications

Tissue engineering is an interdisciplinary field of science that has developed very intensively in recent years. The first part of this review describes materials with medical and dental applications from the following groups: metals, polymers, ceramics, and composites. Both positive and negative sides of their application are presented from the point of view of medical application and mechanical properties. A variety of techniques for the manufacture of biomedical components are presented in this review. The main focus of this work is on additive manufacturing and 3D printing, as these modern techniques have been evaluated to be the best methods for the manufacture of medical and dental devices. The second part presents devices for skull bone reconstruction. The materials from which they are made and the possibilities offered by 3D printing in this field are also described. The last part concerns dental transitional implants (scaffolds) for guided bone regeneration, focusing on polylactide–hydroxyapatite nanocomposite due to its unique properties. This section summarises the current knowledge of scaffolds, focusing on the material, mechanical and biological requirements, the effects of these devices on the human body, and their great potential for applications.

Simulated Analysis Ti-6Al-4V Plate and Screw as Transverse Diaphyseal Fracture Implant for Ulna Bone

Transverse diaphyseal fracture is one of the most common fractures caused by accidents. The fracture treatment needs surgery to apply the fixations that matched the bone geometry. This paper aims to reverse engineering of a published bone plate and screw criteria into a three-dimensional (3D) model and analyze them using the finite element method (FEM) in several factors, the bone, the plate, the screw, the unification of plate and screw, and combination all components. This paper conducts two main activities of designing plate and screw based on literature for ulna bone implant and running the FEM to achieve the von Misses stress in the plate, screw, and bone by placing load and constrained area based on the actual use of the implant in the patient. The maximum number in von Misses stress are 5.01855 MPa for bone only, 0.00918 MPa for plate only, 193.304 MPa for screws only, 6.28160 MPa for the assembly screws and a plate, and 761.07 MPa for all unification. All simulation results meet the expectation that the bone analysis is less than the compressive strength of the ulnar bone. Moreover, when applied to the bone, the plate and screw analysis and the assembly also demonstrate a lower number than the yield strength of the properties of the Ti6Al4V materials. All this biomechanical assessment confirms that designs could withstand ulnar bone’s ultimate flexural load and pressure. The finite element analysis (FEA) on the proposed recreated dimension on ulnar plate and screw is expected to accelerate the rehabilitation process of radius ulnar fracture, particularly in the transverse diaphyseal fracture in ulna bone.

A Fresh Look at Mouthwashes-What Is Inside and What Is It For?

Mouthwashes are a very popular additional oral hygiene element and there are plenty of individual products, whose compositions are in a state of flux. The aim of our study was to investigate the compositions of mouthwashes and their functions, as well as to discuss their effectiveness in preventing and curing oral diseases and side effects. We searched for mouthwashes available on the market in Poland. We identified 241 individual mouthwash products. The extraction of compositions was performed and functions of the ingredients were assessed. Then, analysis was performed. The evaluation revealed that there are plenty of ingredients, but a typical mouthwash is a water–glycerine mixture and consists of additional sweetener, surfactant, preservative, and some colourant and flavouring agent, as well as usually having two oral health substances, anticaries sodium fluoride and antimicrobial essential oils. The effectiveness or side effects of several substances of mouthwashes were thoroughly discussed. We recommend not multiplying individual mouthwash products and their ingredients beyond medical or pharmaceutical necessity, especially without scientific proof.