Comparative Study of the Adsorption of Acid Blue 40 on Polyaniline, Magnetic Oxide and Their Composites: Synthesis, Characterization and Application

Multifunctional carboxymethyl cellulose/graphene oxide/polyaniline hybrid thin film for adsorptive removal of Cu(II) and oxytetracycline antibiotic from wastewater

The antibiotics and metal ions in the contaminated water bodies must be removed using appropriate methods for sustainable development. In this study, the multifunctional carboxymethyl cellulose/graphene oxide/polyaniline (CMC/GO/PANI) hybrid thin film was synthesized and utilized for adsorptive scavenging of (Cu(II) and oxytetracycline (OTC) from wastewater. The prepared thin films' morphology, chemical compositions, functionality, and surface charge were analyzed by well-known physicochemical techniques. The adsorption process of the selected model pollutants was examined as a function of reaction time, Cu(II), and OTC solution pH, concentrations, and temperatures. Results showed that CMC/GO/PANI hybrid thin film had higher Cu(II) and OTC adsorption than CMC, GO/CMC, and PANI/CMP thin films due to the multifunctional synergetic effect. The adsorption kinetic data were fitted to the pseudo-second-order model. Redlich-Peterson isotherm model well interpreted Cu(II) and OTC scavenging equilibrium data. Energetically, the adsorption was spontaneous and endothermic for both pollutants. The multifunctional CMC/GO/PANI thin film was recycled and reused seven times during adsorption-desorption cycles. The study outcomes demonstrated that CMC/GO/PANI thin film could be reused multiple times for large-scale wastewater purification.

Ionic Liquid-Assisted Fabrication of Bioactive Heterogeneous Magnetic Nanocatalyst with Antioxidant and Antibacterial Activities for the Synthesis of Polyhydroquinoline Derivatives

Antibacterial materials have obtained much attention in recent years due to the presence of hazardous agents causing oxidative stress and observation of pathogens. However, materials with antioxidant and antibacterial activities can cause toxicity due to their low biocompatibility and safety profile, urging scientists to follow new ways in the synthesis of such materials. Ionic liquids have been employed as a green and environmentally solvent for the fabrication of electrically conductive polymers. In the present study, an antibacterial poly(p-phenylenediamine)@Fe3O4 (PpPDA@Fe3O4) nanocomposite was fabricated using [HPy][HSO4] ionic liquid. The chemical preparation of PpPDA@Fe3O4 nanocomposite was initiated through the oxidative polymerization of p-phenylenediamine by ammonium persulfate in the presence of [HPy][HSO4]. The PpPDA@Fe3O4 nanocomposite exhibited antibacterial properties against Gram-negative (Escherichia coli) and Gram-positive (Bacillus subtilis) bacteria. The PpPDA@Fe3O4 nanocomposite was employed as a heterogeneous nanocatalysis for one-pot synthesis of polyhydroquinoline derivatives using aromatic aldehyde, dimedone, benzyl acetoacetate, and ammonium acetate. Polyhydroquinoline derivatives were synthesized in significant yields (90-97%) without a difficult work-up procedure in short reaction times. Additionally, PpPDA@Fe3O4 nanocatalyst was recycled for at least five consecutive catalytic runs with a minor decrease in the catalytic activity. In this case, 11 derivatives of polyhydroquinoline showed in vitro antioxidant activity between 70-98%.

The Adsorption Performance of Polyaniline/ZnO Synthesized through a Two-Step Method

Polyaniline/Zinc oxide (PANI/ZnO) were prepared using a two-step method, and the morphology and the structure of PANI/ZnO composites were characterized through a scanning electron microscope (SEM) and X-ray diffraction (XRD). Factors such as the content of ZnO, the adsorption time and the mass of the adsorbent, and the kinetic equation of PANI/ZnO as adsorbents for the adsorption of methyl orange solution were studied. The results showed that the adsorption efficiency of methyl orange by polyaniline with the increase of adsorbent mass firstly increased and then decreased. Among the composites with the same quality, PANI composites with 8% ZnO have a better adsorption effect for methyl orange, and the maximum adsorption ratio can reach 69% with the increase of adsorption time at 0.033 g; With the increase of adsorbent mass, the adsorption efficiency of PANI composites with 8% ZnO increased continuously. When the mass increased from 0.033 g to 0.132 g, the adsorption rate increased from 69% to 93%, and the adsorption of the methyl orange solution by PANI/ZnO composites was more in line with the quasi-second-order kinetic equation.

Preparation of Magnetic Composite Polyaniline/Fe3O4−Hydrotalcite and Performance in Removal of Methyl Orange

Magnetic composite fabricated from polyaniline and Fe3O4-hydrotalcite (Pan/MHT) was successfully applicated for removal of methyl orange (MO) from wastewater. The structure and properties of Pan/MHT were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, vibrating sample magnetometer, and Brunauer-Emmett-Teller adsorption isotherm. Adsorption kinetic results indicated that the adsorption process followed pseudosecond-order kinetic model ( $R^2=0.999$ ), MO adsorption onto Pan/MHT was well described by Freundlich isotherm ( $R^2=0.994$ ), and the MO adsorption capacity of 2 Pan/MHT obtained the highest with $Q_e=156.25\text{mg}/\text{g}$ . Batch adsorption experiments were carried out using magnetic composite with the effects of initial MO concentration, solution pH, and adsorbent dosage. The results revealed that the magnetic Pan/MHT exhibited efficient adsorption of MO in the aqueous solution as a result of the affinity for organic dyes, microporous structure, and suitable surface area for adsorption (15,460 m2/g). The superparamagnetic behavior of Pan/MHT (with $H_c=18.56\text{Oe}$ , $M_s=23.38\times {10}^{-3}\text{emu}/\text{g}$ , and $M_r=0.91\times {10}^{-3}\text{emu}/\text{g}$ ) helps that it could be separated from the solution and performs as an economical and alternative adsorbent to removal and degrade azo dye from wastewater. Pan/MHT was also investigated to reuse after desorption of MO in 0.1 M HCl, and the results show that 2 Pan/MHT can be reused for 4 cycles with $Q_e=79.66\text{mg}/\text{g}.$

Conductive Polymers and Their Nanocomposites as Adsorbents in Environmental Applications

Proper treatment and disposal of industrial pollutants of all kinds are a global issue that presents significant techno-economical challenges. The presence of pollutants such as heavy metal ions (HMIs) and organic dyes (ODs) in wastewater is considered a significant problem owing to their carcinogenic and toxic nature. Additionally, industrial gaseous pollutants (GPs) are considered to be harmful to human health and may cause various environmental issues such as global warming, acid rain, smog and air pollution, etc. Conductive polymer-based nanomaterials have gained significant interest in recent years, compared with ceramics and metal-based nanomaterials. The objective of this review is to provide detailed insights into different conductive polymers (CPs) and their nanocomposites that are used as adsorbents for environmental remediation applications. The dominant types of CPs that are being used as adsorbent materials include polyaniline (PANI), polypyrrole (Ppy), and polythiophene (PTh). The various adsorption mechanisms proposed for the removal of ODs, HMIs, and other GPs by the different CPs are presented, together with their maximum adsorption capacities, experimental conditions, adsorption, and kinetic models reported.

Special Issue: Conductive Polymers: Materials and Applications

Intrinsically conductive polymers (CPs) combine the inherent mechanical properties of organic polymers with charge transport, opto-electronic and redox properties that can be easily tuned up to those typical of semiconductors and metals. The control of the morphology at the nanoscale and the design of CP-based composite materials have expanded their multifunctional character even further. These virtues have been exploited to advantage in opto-electronic devices, energy-conversion and storage systems, sensors and actuators, and more recently in applications related to biomedical and separation science or adsorbents for pollutant removal. The special issue “Conductive Polymers: Materials and Applications” was compiled by gathering contributions that cover the latest advances in the field, with special emphasis upon emerging applications.

Effective Adsorption of Hexavalent Chromium and Divalent Nickel Ions from Water through Polyaniline, Iron Oxide, and Their Composites

Water pollution caused by industrial wastes containing heavy metals and dyes is a major environmental problem. This study reports on the synthesis, characterization, and utilizations of Polyaniline (PANI) and its composites with Fe3O4 for the removal of hexavalent chromium Cr(VI) and divalent nickel Ni(II) ions from water. The adsorption data were fitted in Freudlich, Langmuir, Tempkin, Dubbanin–Ruddishkawich (D–R), and Elovich adsorption isotherms. The Freundlich isotherm fits more closely to the adsorption data with R2 values of 0.9472, 0.9890, and 0.9684 for adsorption of Cr(VI) on Fe3O4, PANI, and PANI/Fe3O4 composites, respectively, while for adsorption of Ni(II) these values were 0.9366, 0.9232, and 0.9307 respectively. The effects of solution pH, initial concentration, contact time, ionic strength, and adsorbent dosage on adsorption behavior were investigated. The adsorption ability of composites was compared with pristine PANI and Fe3O4 particles. Activation energy and other thermodynamic properties such as changes in enthalpy, entropy, and Gibbs free energy indicated spontaneous and exothermic adsorption.

Adsorption and Separation of the H2O/H2SO4 and H2O/C2H5OH Mixtures: A Simulated and Experimental Study

Adsorption processes are characterized by their kinetics and equilibrium isotherms described by mathematical models. Nowadays, adsorption with molecular sieves is a method used to separate certain elements or molecules from a mixture and produce hydrogen, nitrogen, oxygen, ethanol, or water treatment. This study had two main objectives. The first one was focused on the use of different natural (Clinoptilolite-S.L. Potosi, Clinoptilolite-Puebla, and Heulandite-Sonora) and synthetic (Zeolite Type 3A) adsorbents to separate the mixtures H 2 O / H 2 S O 4 and H 2 O / C 2 H 5 O H . It was determined that both Zeolite Type-3A and Heulandite-Sonora have greater adsorption capacity in a shorter time compared with the Clinoptilolites at different temperatures. The second objective was the simulation of a pressure swing adsorption process to dehydrate ethanol using the parameters obtained from Zeolite Type 3A (with maximum adsorption capacity). Several configurations were considered to calculate the appropriate nominal values for the optimal process. The results illustrate that the purity of ethanol is increased when the following parameters are considered in the adsorption process: a high pressure, a constant temperature between 100 and 120 ° C, a feed composition near the azeotropic point with lower water content, and a purge pressure near the vacuum. Finally, the results show that it is possible to take advantage of the length of the absorber bed in order to reduce the energy costs by increasing the ethanol production as well as complying with the international purity standards.