Assessment and Characterization of Some New Photosensitizers for Antimicrobial Photodynamic Therapy (aPDT)

Efficacy of methylene blue and curcumin mediated antimicrobial photodynamic therapy in the treatment of indirect pulp capping in permanent molar teeth

PURPOSE

This study aimed to evaluate the adhesive bond strength and antibacterial efficacy of methylene blue (MB)-mediated antimicrobial photodynamic therapy (aPDT) and curcumin (CUR)-mediated aPDT versus the conventional disinfectants, such as chlorhexidine gluconate (CHX) gel and sodium hypochlorite (NaOCl), for indirect pulp capping (IPC) treatment of permanent molars.

METHODS

One Hundred grossly carious human permanent molars were collected through non-traumatic extraction. All specimens were embedded in polyvinyl cross-sections to the cemento-enamel junction. The cavity preparation was conducted by grinding the samples using silicon carbide discs. After culturing Streptococcus mutans (S. mutans), a 10 µL of S. mutans suspension (10⁶ colony forming units/mL) was transferred in each tooth cavity and anaerobically incubated for 48 hours at 37°C. All specimens were randomly divided into 5 groups: Group-I: samples treated IPC; Group-II: samples treated with 2% CHX gel; Group-III: samples treated with 6% NaOCl; Group-IV: irradiation of prepared cavity with MB-mediated aPDT; and Group-V: irradiation of prepared cavity with CUR-mediated aPDT. After disinfection methods, the universal adhesive was used, and all specimens were restored using giomer. Eventually, confocal laser scanning microscopy, shear bond strength (SBS), micro-tensile bond strength (μTBS), four-point bending strength (4P-BS) analyses were performed, and the data were analyzed statistically.

RESULTS

At baseline, the highest SBS (48.8 ± 6.5 MPa), μTBS (54.3 ± 3.9 MPa), and 4P-BS (123 ± 32 MPa) scores were demonstrated by the samples treated with MB-mediated aPDT. However, after 12 months of storage, the highest SBS (42.3 ± 3.9 MPa) and μTBS (45.2 ± 6.6 MPa) scores were shown by samples treated with MB-mediated aPDT, while CUR-mediated aPDT treated samples demonstrated the highest 4P-BS scores (70 ± 18 MPa). Moreover, the highest antibacterial activity against S. mutans was shown by the samples treated with MB-mediated aPDT.

CONCLUSIONS

The application of aPDT, especially MB-mediated, demonstrated superior SBS, μTBS, and 4P-BS values as well as antibacterial activity against S. mutans as compared to 2% CHX gel and 6% NaOCl as cavity disinfectants for IPC treatment of permanent molars.

Characterization of a Graphene Oxide-Reinforced Whey Hydrogel as an Eco-Friendly Absorbent for Food Packaging

This study presents a structural analysis of a whey and gelatin-based hydrogel reinforced with graphene oxide (GO) by ultraviolet and visible (UV-VIS) spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The results revealed barrier properties in the UV range for the reference sample (containing no graphene oxide) and the samples with minimal GO content of 0.66×10−3% and 3.33×10−3%, respectively, in the UV-VIS and near-IR range; for the samples with higher GO content, this was 6.67×10−3% and 33.33×10−3% as an effect of the introduction of GO into the hydrogel composite. The changes in the position of diffraction angles 2θ from the X-ray diffraction patterns of GO-reinforced hydrogels indicated a decrease in the distances between the turns of the protein helix structure due to the GO cross-linking effect. Transmission electron spectroscopy (TEM) was used for GO, whilst scanning electron microscopy (SEM) was used for the composite characterization. A novel technique for investigating the swelling rate was presented by performing electrical conductivity measurements, the results of which led to the identification of a potential hydrogel with sensor properties.

An Explorative Review on Advanced Approaches to Overcome Bacterial Resistance by Curbing Bacterial Biofilm Formation

The continuous emergence of multidrug-resistant pathogens evoked the development of innovative approaches targeting virulence factors unique to their pathogenic cascade. These approaches aimed to explore anti-virulence or anti-infective therapies. There are evident concerns regarding the bacterial ability to create a superstructure, the biofilm. Biofilm formation is a crucial virulence factor causing difficult-to-treat, localized, and systemic infections. The microenvironments of bacterial biofilm reduce the efficacy of antibiotics and evade the host's immunity. Producing a biofilm is not limited to a specific group of bacteria; however, Pseudomonas aeruginosa, Acinetobacter baumannii, and Staphylococcus aureus biofilms are exemplary models. This review discusses biofilm formation as a virulence factor and the link to antimicrobial resistance. In addition, it explores insights into innovative multi-targeted approaches and their physiological mechanisms to combat biofilms, including natural compounds, phages, antimicrobial photodynamic therapy (aPDT), CRISPR-Cas gene editing, and nano-mediated techniques.

New Composite Hydrogel Based on Whey and Gelatin Crosslinked with Copper Sulphate

By-products from the meat and dairy industries are important sources of high biological value proteins. This paper explores possibilities for improving the swelling and integrity of a cross-linked whey and gelatin hydrogel with different amounts of CuSO₄ × 5H₂O. Overall, swelling tests demonstrate that cross-linked samples show a better hydration capacity and stability in the hydration medium, but different copper concentrations lead to different swelling behavior. At concentrations smaller than 0.39%, the sample lasts for 75 h in a water environment before beginning to disintegrate. At a concentration of copper sulphate higher than 0.55%, the stability of the sample increased substantially. The swelling kinetics has been investigated. The diffusion constant values increased with the increase in copper concentration, but, at the highest concentration of copper (0.86%), its value has decreased. Spectroscopy analyses such as Fourier transform infrared (FT-IR), X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-VIS), and nuclear magnetic resonance (NMR) relaxometry analyses revealed changes in the secondary and tertiary structure of proteins as a result of the interaction of Cu²⁺ ions with functional groups of protein chains. In addition to its cross-linking ability, CuSO₄ × 5H₂O has also shown excellent antibacterial properties over common bacterial strains responsible for food spoilage. The result of this research demonstrates the potential of this hydrogel system as a unique material for food packaging.

Photodynamic Therapy with Natural Photosensitizers in the Management of Periodontal Disease Induced in Rats

This study aims to investigate the effect of new natural photosensitizers (PS) (based on oregano essential oil, curcuma extract, and arnica oil) through in vitro cytotoxicity and biological tests in rat-induced periodontal disease, treated with photodynamic therapy (aPDT). The cytotoxicity of PS was performed on human dental pulp mesenchymal stem cells (dMSCs) and human keratinocyte (HaCaT) cell lines. Periodontal disease was induced by ligation of the first mandibular molar of 25 rats, which were divided into 5 groups: control group, periodontitis group, Curcuma and aPDT-treated group, oregano and aPDT-treated group, and aPDT group. The animals were euthanized after 4 weeks of study. Computed tomography imaging has been used to evaluate alveolar bone loss. Hematological and histological evaluation showed a greater magnitude of the inflammatory response and severe destruction of the periodontal ligaments in the untreated group.. For the group with the induced periodontitis and treated with natural photosensitizers, the aPDT improved the results; this therapy could be an important adjuvant treatment. The obtained results of these preliminary studies encourage us to continue the research of periodontitis treated with natural photosensitizers activated by photodynamic therapy.

Evaluation of antimicrobial photodynamic therapy with acidic methylene blue for the treatment of experimental periodontitis

OBJECTIVE

To investigate the security and effectiveness of antimicrobial photodynamic therapy (aPDT) with a citric acid-based methylene blue (MB) on the periodontal repair following the treatment of ligature-induced experimental periodontitis (EP) in rats.

MATERIAL AND METHODS

Were used 120 male rats, randomly divided into 4 experimental groups (n = 30): no treatment (NT), SRP alone (SRP), SRP plus aPDT using conventional MB pH 7.0 (aPDT-pH7), SRP plus aPDT using acidic MB pH 1.0 (aPDT-pH1). EP was induced at day 0 by the placement of a ligature around the mandibular left first molars. Ten animals per group/period were euthanized at 14, 22 and 37 days. Histopathological, histometric (percentage of bone in the furcation [PBF]) and immunohistochemical (for tartrate-resistant acid phosphatase [TRAP] and osteocalcin [OCN]) analyses were performed. Data were statistically analyzed.

RESULTS

aPDT-pH1 showed the highest PBF as compared with the other treatments. Collectively, tissues' reaction to both dyes were controlled and healthy for the periodontium. Both aPDT protocols reduced the extent and intensity of the local inflammatory response, reduced the alveolar bone resorption, and promoted a better structural arrangement of the connective tissue as compared with SRP. TRAP expression was downregulated while OCN expression was upregulated by aPDT as compared with SRP alone.

CONCLUSION

Our data implicate that the novel MB pH 1.0 is as safe as the conventional MB for use in aPDT and raises its additional benefit of increasing the amount of alveolar bone in the furcation.

Photodynamic Therapy (PDT) in Prosthodontics: Disinfection of Human Teeth Exposed to Streptococcus mutans and the Effect on the Adhesion of Full Ceramic Veneers, Crowns, and Inlays: An In Vitro Study

The use of PDT in prosthodontics as a disinfection protocol can eradicate bacteria from tooth surfaces by causing the death of the microorganisms to which the photosensitizer binds, absorbing the energy of laser light during irradiation. The aim of the study was to investigate the capacity of PDT to increase the bond strength of full ceramic restorations. In this study, 45 extracted human teeth were prepared for veneers, crowns, and inlays and contaminated with Streptococcus mutans. Tooth surfaces decontamination was performed using a diode laser and methylene blue as a photosensitizer. The disinfection effect and the impact on tensile bond strength were evaluated by scanning electron microscopy (SEM) and pull-out tests of the cemented ceramic prosthesis. Results show that the number of bacteria was reduced from colonized prepared tooth surfaces, and the bond strength was increased when PDT was used. In conclusion, the present study indicates that using PDT as a protocol before the final adhesive cementation of ceramic restorations could be a promising approach, with outstanding advantages over conventional methods.

Optical clearing of tissues: Issues of antimicrobial phototherapy and drug delivery

This review presents principles and novelties in the field of tissue optical clearing (TOC) technology, as well as application for optical monitoring of drug delivery and effective antimicrobial phototherapy. TOC is based on altering the optical properties of tissue through the introduction of immersion optical cleaning agents (OCA), which impregnate the tissue of interest. We also analyze various methods and kinetics of delivery of photodynamic agents, nanoantibiotics and their mixtures with OCAs into the tissue depth in the context of antimicrobial and antifungal phototherapy. In vitro and in vivo studies of antimicrobial phototherapies, such as photodynamic, photothermal plasmonic and photocatalytic, are summarized, and the prospects of a new TOC technology for effective killing of pathogens are discussed.

The Enhancement of the Photodynamic Therapy and Ciprofloxacin Activity against Uropathogenic Escherichia coli Strains by Polypodium vulgare Rhizome Aqueous Extract

Antibiotic therapy and photodynamic therapy (PDT) are commonly used to treat bacterial infections. Unfortunately, these methods are often ineffective. Therefore, agents that could effectively support antibiotic therapy and PDT in the inactivation of pathogens are being sought. Phytotherapy seems to be a good solution. The aim of the current research was to examine whether Polypodium vulgare extract (PvE) would improve the effectiveness of PDT and ciprofloxacin (CIP), an antibiotic that is commonly used to treat urinary tract infections in humans. UHPLC-MS analysis was performed to establish the PvE content. Chlorin e6 has been used as a photosensitizer in the PDT method. Biofilm production was established using the spectrophotometric method. The live cell count in planktonic and biofilm consortia was determined with the microdilution method and DAPI staining. The decrease of the bacterial survival, biofilm mass synthesis, and morphological changes of the bacteria under the combined treatments: PDT+PvE and CIP+PvE was noted. The results clearly indicate that the PvE can be used as a good agent for improving the efficacy of both PDT and the CIP activity to inactivate uropathogenic Escherichia coli strains. The obtained results are of particular value in the era of widespread and still-increasing drug resistance among bacterial pathogens.

Erythrosine as a photosensitizer for antimicrobial photodynamic therapy with blue light-emitting diodes - An in vitro study

BACKGROUND

This study aims to test the absorbance of a new composition of erythrosine, its pH, cell viability and potential as a photo sensitizer against Candida albicans when irratiaded with blue light emitting-diode (LED).

METHODS

For pH and absorbance tests, erythrosine was prepared at a concentration of 0.03/ml. The cells of the L929 strain were cultured and the alamarBlue® assay was performed on samples to assess cell viability. For the microbiological essay, the strain of Candida albicans ATCC 90028 was selected. Yeast suspensions were divided into the following groups: control without irradiation or photosensitizer (C), irradiated group without photosensitizer (L), photosensitizer group without irradiation (0), and groups that received photosensitizer and irradiation, called aPDT groups.

RESULTS

Erythrosine had no significant changes in pH and its absorbance was also consistent (≅400 nm). When it came to cell viability, on the first day, the group that was in contact with the dye and irradiated with the LED in minimun power was found to have the higher cell proliferation. On day 3, both irradiated groups (maximum and minimum) showed the highest cell proliferation. In the microbiological essay with C. albicans, aPDT groups started to show microbial reduction after 60 and 90 s of irradiation and when irradiated for 120 s, 6 microbial reduction logs were found.

CONCLUSIONS

The erythrosine in question is a PS, with pH stability, blue light absorbance, cell viability and efficacy against C. albicans. More studies with this PS should be encouraged in order to verify its performance in aPDT.

The Influence of Enzymatic Hydrolysis of Whey Proteins on the Properties of Gelatin-Whey Composite Hydrogels

Amino-acids, peptides, and protein hydrolysates, together with their coordinating compounds, have various applications as fertilizers, nutritional supplements, additives, fillers, or active principles to produce hydrogels with therapeutic properties. Hydrogel-based patches can be adapted for drug, protein, or peptide delivery, and tissue healing and regeneration. These materials have the advantage of copying the contour of the wound surface, ensuring oxygenation, hydration, and at the same time protecting the surface from bacterial invasion. The aim of this paper is to describe the production of a new type of hydrogel based on whey protein isolates (WPI), whey protein hydrolysates (WPH), and gelatin. The hydrogels were obtained by utilizing a microwave-assisted method using gelatin, glycerol, WPI or WPH, copper sulfate, and water. WPH was obtained by enzymatic hydrolysis of whey protein isolates in the presence of bromelain. The hydrogel films obtained have been characterized by FT-IR and UV-VIS spectroscopy. The swelling degree and swelling kinetics have also been determined.

Natural Photosensitizers in Antimicrobial Photodynamic Therapy

Health problems and reduced treatment effectiveness due to antimicrobial resistance have become important global problems and are important factors that negatively affect life expectancy. Antimicrobial photodynamic therapy (APDT) is constantly evolving and can minimize this antimicrobial resistance problem. Reactive oxygen species produced when nontoxic photosensitizers are exposed to light are the main functional components of APDT responsible for microbial destruction; therefore, APDT has a broad spectrum of target pathogens, such as bacteria, fungi, and viruses. Various photosensitizers, including natural extracts, compounds, and their synthetic derivatives, are being investigated. The main limitations, such as weak antimicrobial activity against Gram-negative bacteria, solubility, specificity, and cost, encourage the exploration of new photosensitizer candidates. Many additional methods, such as cell surface engineering, cotreatment with membrane-damaging agents, nanotechnology, computational simulation, and sonodynamic therapy, are also being investigated to develop novel APDT methods with improved properties. In this review, we summarize APDT research, focusing on natural photosensitizers used in in vitro and in vivo experimental models. In addition, we describe the limitations observed for natural photosensitizers and the methods developed to counter those limitations with emerging technologies.

Physical-Mechanical Characteristics and Microstructure of Ti6Al7Nb Lattice Structures Manufactured by Selective Laser Melting

The demand of lattice structures for medical applications is increasing due to their ability to accelerate the osseointegration process, to reduce the implant weight and the stiffness. Selective laser melting (SLM) process offers the possibility to manufacture directly complex lattice applications, but there are a few studies that have focused on biocompatible Ti6Al7Nb alloy. The purpose of this work was to investigate the physical-mechanical properties and the microstructure of three dissimilar lattice structures that were SLM-manufactured by using Ti6Al7Nb powder. In particular, the strut morphology, the fracture characterization, the metallographic structure, and the X-ray phase identification were analyzed. Additionally, the Gibson-Ashby prediction model was adapted for each lattice topology, indicating the theoretical compressive strength and Young modulus. The resulted porosity of these lattice structures was approximately 56%, and the pore size ranged from 0.40 to 0.91 mm. Under quasi-static compression test, three failure modes were recorded. Compared to fully solid specimens, the actual lattice structures reduce the elastic modulus from 104 to 6-28 GPa. The struts surfaces were covered by a large amount of partial melted grains. Some solidification defects were recorded in struts structure. The fractographs revealed a brittle rupture of struts, and their microstructure was mainly α' martensite with columnar grains. The results demonstrate the suitability of manufacturing lattice structures made of Ti6Al7Nb powder having unique physical-mechanical properties which could meet the medical requirements.