PlantCrystals-Nanosized Plant Material for Improved Bioefficacy of Medical Plants

Assessing the Oxidative State of the Skin by Combining Classical Tape Stripping with ORAC Assay

The antioxidant barrier system of the skin acts as the main defence against environmental pro-oxidants. Impaired skin oxidative state is linked to unhealthy conditions such as skin autoimmune diseases and cancer. Thus, the evaluation of the overall oxidative state of the skin plays a key role in further understanding and prevention of these disorders. This study aims to present a novel ex vivo model to evaluate the skin oxidative state by the measurement of its antioxidant capacity (AOC). For this the ORAC assay was combined with classical tape stripping and infrared densitometry to evaluate the oxidative state of the stratum corneum (SC). Outcomes implied the suitability of the used model to determine the intrinsic antioxidant capacity (iAOC) of the skin. The average iAOC of untreated skin was determined as 140 ± 7.4 µM TE. Skin exposure to UV light for 1 h reduced the iAOC by about 17%, and exposure for 2 h decreased the iAOC by about 30%. Treatment with ascorbic acid (AA) increased the iAOC in a dose-dependent manner and reached an almost two-fold iAOC when 20% AA solution was applied on the skin. The application of coenzyme Q10 resulted in an increase in the iAOC at low doses but decreased the iAOC when doses > 1% were applied on the skin. The results show that the combination of classical tape stripping and ORAC assay is a cost-effective and versatile method to evaluate the skin oxidative state and the pro-oxidate and antioxidative effects of topical skin treatments on the iAOC of the skin. Therefore, the model can be considered to be a valuable tool in skin research.

Assessing the Dermal Penetration Efficacy of Chemical Compounds with the Ex-Vivo Porcine Ear Model

(1) Background: The ex vivo porcine ear model is often used for the determination of the dermal penetration efficacy of chemical compounds. This study investigated the influence of the post-slaughter storage time of porcine ears on the dermal penetration efficacy of chemical compounds. (2) Methods: Six different formulations (curcumin and different fluorescent dyes in different vehicles and/or nanocarriers) were tested on ears that were (i) freshly obtained, (ii) stored for 24 or 48 h at 4 °C after slaughter before use and (iii) freshly frozen and defrosted 12 h before use. (3) Results: Results showed that porcine ears undergo post-mortem changes. The changes can be linked to rigor mortis and all other well-described phenomena that occur with carcasses after slaughter. The post-mortem changes modify the skin properties of the ears and affect the penetration efficacy. The onset of rigor mortis causes a decrease in the water-holding capacity of the ears, which leads to reduced penetration of chemical compounds. The water-holding capacity increases once the rigor is released and results in an increased penetration efficacy for chemical compounds. Despite different absolute penetration values, no differences in the ranking of penetration efficacies between the different formulations were observed between the differently aged ears. (4) Conclusions: All different types of ears can be regarded to be suitable for dermal penetration testing of chemical compounds. The transepidermal water loss (TEWL) and/or skin hydration of the ears were not correlated with the ex vivo penetration efficacy because both an impaired skin barrier and rigor mortis cause elevated skin hydration and TEWL values but an opposite penetration efficacy. Other additional values (for example, pH and/or autofluorescence of the skin) should, therefore, be used to select suitable and non-suitable skin areas for ex vivo penetration testing. Finally, data from this study confirmed that smartFilms and nanostructured lipid carriers (NLC) represent superior formulation strategies for efficient dermal and transdermal delivery of curcumin.

Cucumber-Derived Exosome-like Vesicles and PlantCrystals for Improved Dermal Drug Delivery

(1) Background: Extracellular vesicles (EVs) are considered to be efficient nanocarriers for improved drug delivery and can be derived from mammalian or plant cells. Cucumber-derived EVs are not yet described in the literature. Therefore, the aim of this study was to produce and characterize cucumber-derived EVs and to investigate their suitability to improve the dermal penetration efficacy of a lipophilic active ingredient (AI) surrogate. (2) Methods: The EVs were obtained by classical EVs isolation methods and by high pressure homogenization (HPH). They were characterized regarding their physico-chemical and biopharmaceutical properties. (3) Results: Utilization of classical isolation and purification methods for EVs resulted in cucumber-derived EVs. Their dermal penetration efficacy for the AI surrogate was 2-fold higher when compared to a classical formulation and enabled a pronounced transdermal penetration into the viable dermis. HPH resulted in submicron sized particles composed of a mixture of disrupted plant cells. A successful isolation of pure EVs from this mixture was not possible with classical EVs isolation methods. The presence of EVs was, therefore, proven indirectly. For this, the lipophilic drug surrogate was admixed to the cucumber juice either prior to or after HPH. Admixing of the drug surrogate to the cucumber prior to the HPH resulted in a 1.5-fold increase in the dermal penetration efficacy, whereas the addition of the AI surrogate to the cucumber after HPH was not able to improve the penetration efficacy. (4) Conclusions: Results, therefore, indicate that HPH causes the formation of EVs in which AI can be incorporated. The formation of plant EVs by HPH was also indicated by zeta potential analysis.

Production and Characterization of Sumac PlantCrystals: Influence of High-Pressure Homogenization on Antioxidant Activity of Sumac (Rhus coriaria L.)

Oxidative stress diseases are usually treated or prevented by using antioxidants from natural or artificial sources. However, as a sustainable source of phytochemicals, plants got a renewed interest in obtaining their active agents using green extraction technologies, i.e., sustainable extraction techniques that reduce energy consumption, use renewable sources and result in less post-extraction wastes. The high-pressure homogenization (HPH) technique was introduced into the food industry since it was invented in 1900 to homogenize milk and later to produce fruit juices with a longer shelf-life without preservatives. Recently, HPH was introduced as an eco-friendly method to nanomill plants for improved extraction efficacy without using organic solvents. In this study, sumac was used as an antioxidants-rich spice model to investigate the effects of HPH on its antioxidant capacity (AOC). Sumac was rendered into PlantCrystals by using HPH. Particle size characterization proved the presence of submicron-sized particles (about 750 nm). Thus, HPH was able to produce sumac PlantCrystals and increased the AOC of bulk sumac by more than 650% according to the ORAC (oxygen radical absorbance capacity) assay. The polyphenol and flavonoid contents showed higher values after HPH. Interestingly, the DPPH (1,1-diphenyl-2-picrylhydrazyl) assay also showed a well improved AOC (similar to ascorbic acid) after HPH. In fact, in this study, the PlantCrystal-technology was demonstrated to cause an efficient cell rupture of the sumac plant cells. This caused an efficient release of antioxidants and resulted in sumac PlantCrystals with a 6.5-fold higher antioxidant capacity when compared to non-processed sumac bulk material.

Fingerprint of Nature—Skin Penetration Analysis of a Stinging Nettle PlantCrystals Formulation

Background: PlantCrystals are a new concept to produce plant-based formulations. Their principle is based on the diminution of parts of or whole plants. In this study, the effect of a surfactant on stinging nettle leaf PlantCrystals was investigated. Secondly, the contents of bulk material and the PlantCrystals formulation were compared. In addition, for the very first time, the skin penetration of PlantCrystals was investigated. Methods: Stinging nettle leaves were milled with high-pressure homogenization. Sizes were analyzed via light microscopy and static light scattering. To investigate the effect of the milling, the flavonoid and total carotenoid content were determined, and the antioxidant capacity of the formulation was measured via total polyphenol content and DPPH (1,1-diphenyl-2-picrylhydrazyl) assay. Finally, the impact on skin penetration was investigated. Results: Size analysis showed a stabilizing effect of the surfactant, and the chemical analysis revealed higher flavonoid and polyphenol contents for PlantCrystals. The penetration of the formulation into the stratum corneum was shown to be promising; PlantCrystals possessed a visually perceived higher fluorescence and homogeneity compared to the bulk material. Conclusion: The concept of PlantCrystals improved the availability of valuable constituents and the penetration efficacy. The utilization of the natural chlorophyll fluorescence for skin penetration analysis of plant-based formulations proved itself highly effective.

Unleashing the Biological Potential of Fomes fomentarius via Dry and Wet Milling

Fomes fomentarius, usually referred to as tinder conk, is a common wood-based fungus rich in many interesting phytochemicals and with an unique porous structure. Dry or wet ball milling of this sponge on a planetary mill results in small particles with sizes in the range of 10 µm or below. Suspended in water and without preservatives or other stabilizers, the resulting micro-suspensions are sterile for around six days, probably due to the increased temperatures of around 80 °C especially during the wet milling process. The suspensions also exhibit excellent antioxidant activities as determined in the DPPH, ferric reducing antioxidant potential (FRAP) and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) assays. In the DPPH assay, IC₅₀ values of 0.02–0.04% w/v and 0.04% w/v were observed for dry and wet milled samples, respectively. In the FRAP assay, IC₅₀ values of <0.02% w/v and 0.04% w/v were observed for dry and wet milled samples, respectively. In contrast, the ABTS assay provided IC₅₀ values of 0.04% w/v and 0.005% w/v, respectively. Notably, this activity is mostly—albeit not exclusively—associated with the highly porous particles and their large surfaces, although some active ingredients also diffuse into the surrounding aqueous medium. Such suspensions of natural particles carrying otherwise insoluble antioxidants on their surfaces provide an interesting avenue to unleash the antioxidant potential of materials such as sponges and barks. As dry milling also enables longer storage and transport, applications in the fields of medicine, nutrition, agriculture, materials and cosmetics are feasible.

Improved Antioxidant Capacity of Black Tea Waste Utilizing PlantCrystals

Antioxidants are recommended to prevent and treat oxidative stress diseases. Plants are a balanced source of natural antioxidants, but the poor solubility of plant active molecules in aqueous media can be a problem for the formulation of pharmaceutical products. The potential of PlantCrystal technology is known to improve the extraction efficacy and antioxidant capacity (AOC) of different plants. However, it is not yet proved for plant waste. Black tea (BT) infusion is consumed worldwide and thus a huge amount of waste occurs as a result. Therefore, BT waste was recycled into PlantCrystals using small-scale bead milling. Their characteristics were compared with the bulk-materials and tea infusion, including particle size and antioxidant capacity (AOC) in-vitro. Waste PlantCrystals possessed a size of about 280 nm. Their AOC increased with decreasing size according to the DPPH (1,1-diphenyl-2-picrylhydrazyl) and ORAC (oxygen radical absorbance capacity) assays. The AOC of the waste increased about nine-fold upon nanonization, leading to a significantly higher AOC than the bulk-waste and showed no significant difference to the infusion and the used standard according to DPPH assay. Based on the results, it is confirmed that the PlantCrystal technology represents a natural, cost-effective plant-waste recycling method and presents an alternative source of antioxidant phenolic compounds.