Main and Accessory Canal Filling Quality of a Premixed Calcium Silicate Endodontic Sealer According to Different Obturation Techniques

Outcome of root canal treatment using warm vertical compaction with bioceramic and resin-based sealers: A randomised clinical trial

This study aimed to compare the effect of a bioceramic sealer (iRoot SP) and a resin-based sealer (AH Plus) on the outcome of root canal treatment in a 2-year follow-up. Seventy-six teeth with irreversibly or necrotic pulp were recruited. After instrumentation and disinfection, the root canals were obturated using warm vertical compaction with iRoot SP (n = 43) or AH Plus (n = 33). Patients were followed up by clinical and radiographic examination at 6 12 and 24 months with recall rates of 84.2%, 65.8% and 48.7%, respectively. During each recall session, the success rates were 80%, 85.2% and 85% in the iRoot SP group and 82.8%, 91.3% and 88.2% in the AH Plus group. The success rates of the two groups did not differ significantly (p > 0.05). The bioceramic sealer resulted in a similar clinical performance and success rate to the resin-based sealer in endodontic treatment during a 2-year follow-up.

Volume and power of expansion of novel polyurethane-based sealers

INTRODUCTION

Shrinkage and lack of interfacial adaptation between endodontic sealers and root canal walls may jeopardize the root canal treatment outcome. This study aimed to evaluate the volume and power of expansion (and the relationship between the two) of three novel root canal sealers (polyurethane expandable sealer (PES), zeolite + PES (ZPES), and elastomeric polyurethane sealer (EPS)) in comparison with an epoxy-resin based sealer (AH Plus) and a calcium silicate-based sealer (EndoSequence BC).

METHODS

This study utilized 36 cylinders (30 plastic graduated cylinders for volume of expansion and 6 steel cylinders for power of expansion) (4x10mm) filled with PES, ZPES, EPS, AH Plus, EndoSequence BC, or water (n=5/group). The plastic graduated cylinders were inserted inside a customized Linear Swell Meter (LSM) apparatus to measure the percentage of volumetric expansion. The steel cylinders were placed inside an LSM apparatus mounted onto a universal testing machine to measure the maximum pressure in psi. Specimens were tested for 72 hours for both volume and power of expansion tests. Data were analyzed using Kolmogorov-Smirnov, one-way ANOVA, Post Hoc Tukey, and Pearson correlation tests (p<0.05).

RESULTS

The volume of expansion of PES, ZPES, and EPS was significantly higher than in AH Plus and EndoSequence BC (p<0.05). For the power of expansion, no significant differences were found between the root-filling materials (p>0.05). No correlation was seen between the volume and power of expansion (p>0.05).

CONCLUSION

Although polyurethane-based sealers showed a significantly higher volume of expansion compared to AH Plus and EndoSequence BC, their power of expansion did not increase significantly.

A critical analysis of research methods and experimental models to study root canal fillings

Canal filling materials and techniques have been one of the most studied topics in Endodontics. A simple search using the mesh term "root canal filling" in PubMed revealed more than 11,000 articles, an impressive number that is much higher than "root canal disinfection" (5,544 articles) or even the popular "root canal preparation" (8,527 articles). The overriding importance attributed to root filling procedures is not merely intuitive. It derived from the appealing relevance given by the appearance of the white lines in common radiographs grounded on retrospective clinical data that had identified the quality of a root filling as one of the major causes of treatment failure (lack of healing). Since the publication of the Washington study, impressive efforts have been made for the release of new materials and techniques, as well as, for the development of a plethora of laboratory methods to assess the quality of root filling procedures. This narrative review aims to address and discuss the most relevant laboratory methods to assess the root canal filling. Since filling quality improvements have not translated into higher success rates, as reported in longitudinal clinical studies, more than to deliver a simple methodology-based review, this paper aims to present an in-depth critical view on the assessment of laboratory methods used to study the filling materials and techniques. Recent data indicate that the long-term dimensional stability/degradation over time of endodontic sealers plays a central role in the treatment outcome. In this context, laboratory methods should be developed focusing on predicting, at least to some degree, the long-term clinical behaviour of root canal fillings, rather than simply ranking different materials or techniques.

Antimicrobial and Antibiofilm Properties of Bioceramic Materials in Endodontics

Microbes are prevalent in the root canals of necrotic teeth, and they are the cause of primary and post-treatment apical periodontitis. Bacteria can dwell within the infected root canal system as surface-adherent biofilm structures, which exhibit high resistance to antimicrobial agents. Bioceramic materials, with their biocompatible nature and excellent physico-chemical properties, have been widely used in dental applications, including endodontics. This review focuses on the application of bioceramic technology in endodontic disinfection and the antibiofilm effects of endodontic bioceramic materials. Different bioceramic materials have shown different levels of antibiofilm effects. New supplements have emerged to potentially enhance the antibiofilm properties of bioceramics aiming to achieve the goal of microbial elimination in the root canal system.

Clinical Efficacy of Sealer-based Obturation Using Calcium Silicate Sealers: A Randomized Clinical Trial

INTRODUCTION

This randomized controlled clinical trial compared the clinical efficacy and outcome of a sealer-based obturation technique (SBO) with calcium silicate sealers and a continuous wave of condensation technique (CWC) with a resin-based sealer.

METHODS

Root canals were prepared using rotary instruments and 2.5% sodium hypochlorite. At the next visit, patients were enrolled and randomly assigned into 2 groups on the basis of the obturation protocol: CWC with AH Plus sealer and SBO with Endoseal TCS. Patients were assessed for the level of postoperative pain using a numeric rating scale. The quality of root canal obturation was evaluated in terms of the sealer extrusion, root-filling voids, and level of root filling. The participants were recalled after at least 6 months. Healing of the teeth was determined as a decrease in Periapical Index score and resolution of symptoms. The results were statistically compared by using the χ² test or Fisher exact test, followed by multivariate analysis with logistic regression.

RESULTS

A total of 74 teeth were included in the analysis (79% recalls), and the mean follow-up period was 17 months (6-29 months). Two groups expressed identical distribution of postoperative pain (P = .973) and similar quality of root canal obturation. The total success rates were 93.2% (CWC 92.3%, SBO 94.3%) by loose criteria and 60.8% (CWC 51.3%, SBO 71.4%) by strict criteria, with no significant differences between the 2 groups. The success rate by loose criteria in teeth with sealer extrusion was significantly lower than those in teeth without sealer extrusion (P = .049).

CONCLUSIONS

SBO using an Endoseal TCS could be a possible alternative to CWC using AH Plus. Sealer extrusion and postoperative pain were found to negatively impact prognosis of the endodontic treatment.

Comparison of Dentinal Tubule Penetration between a Calcium Silicate-Based Sealer with Ultrasonic Activation and an Epoxy Resin-Based Sealer: A Study Using Confocal Laser Scanning Microscopy

OBJECTIVE

 The aim of this study was to compare the degree of dentinal penetration between an epoxy resin-based sealer applied by using two different filling methods and an ultrasonically activated calcium silicate-based sealer via confocal laser scanning microscopy (CLSM).

MATERIALS AND METHODS

 Forty-five extracted permanent maxillary premolars with type II canals (Vertucci's classification) were subjected to the experiment. The root canals were instrumented and distributed randomly into the following three groups: AH Plus + continuous wave technique (AHC group); AH Plus + single cone technique (AHS group); and Endoseal MTA + single cone technique with ultrasonic activation (EMS) group. Each sealer was labeled with rhodamine B dye to allow visualization under CLSM. The sealer penetration depth in each sample was observed at 2 mm and 5 mm from the apex by using CLSM. The data were statistically analyzed by using analysis of variance or Kruskal-Wallis H test according to normality of variable (α = 0.05).

RESULTS

 In all groups, the maximum sealer penetration depth, mean fluorescence intensity, and sum fluorescence intensity values were higher at the 5-mm level than at the 2-mm level. At the 5-mm level, the EMS group showed the lowest value (p = 0.02). At the 2-mm level, there were no statistically significant differences among any of the groups. The AHC group showed higher values than the other groups, but there was no statistically significant difference in the apical area where access of instruments was difficult.

CONCLUSION

 The AHC group showed the highest dentinal tubule penetration, but had questionable filing efficacy in the apical area, which is of particular importance for the success of root canal treatment. Therefore, in areas such as the apical 2 mm of premolars with type II canals, which are difficult to access by using instruments such as heat carriers, other appropriate approaches may be required accordingly.

Comparison of Root Filling Quality of Two Types of Single Cone-Based Canal Filling Methods in Complex Root Canal Anatomies: The Ultrasonic Vibration and Thermo-Hydrodynamic Obturation versus Single-Cone Technique

This study aimed to assess the effectiveness of ultrasonic vibration and thermo-hydrodynamic obturation (VibraTHO) using two types of root canal sealers, in comparison to the single-cone (SC) technique and a calcium silicate-based root canal sealer in complex root canal anatomies. Thirty single-rooted human maxillary premolars with two canals that had a complex root canal anatomy of transverse anastomoses or ramifications were prepared and assigned to the following three experimental groups, according to the filling method: SE group, SC technique with Endoseal TCS; VE group, VibraTHO with Endoseal TCS; and VG group, VibraTHO with GuttaFlow 2. Each tooth was scanned using micro-computed tomography, and the volume percentages of the filling material were calculated. The analysis of variance was used to analyze the statistical differences between the three groups (p < 0.05). The mean volume of the filling material was higher in the VG and VE groups than that in the SE group (p < 0.05) along the apical to middle-to-coronal thirds, and significant differences were observed between each root canal area (p < 0.05), with the only exception being at the apical thirds between the VE and SE groups. The VibraTHO technique using GuttaFlow 2 can be a more effective root canal filling method for anatomically complex root canal systems than the SC technique with Endoseal TCS. On the other hand, the VibraTHO technique using Endoseal TCS has a limited effect on improving the quality of the root filling at the apical portion of anatomically complex root canal systems, compared to the SC technique with Endoseal TCS.

Ultrasonic vibration and thermo-hydrodynamic technique for filling root canals: Technical overview and a case series

AIM

To present a novel root canal filling technique: Ultrasonic Vibration & Thermo-Hydrodynamic Obturation (VibraTHO), and its rationale with a series of cases.

SUMMARY

The VibraTHO technique was used to fill the root canals of three clinically challenging cases: A C-shaped mandibular molar with complex anatomy, a C-shaped mandibular molar with an infected root canal system and a periapical lesion that required retreatment, and apically bifurcating mesiobuccal canals with a common orifice in a maxillary second molar. The cases were followed up for 15, 7 and 37 months, respectively. After follow-up, normal periapical status was observed without any noticeable radiographic change in the root canal fillings in each case. Periapical radiographs revealed complete healing of the periapical area in cases with pre-operative periapical lesions.

Microcomputed Tomographic Assessment of the Single Cone Root Canal Fillings Performed by Undergraduate Student, Postgraduate Student and Specialist Endodontist

The present study evaluated the obturation quality of root canals filled with BioRoot RCS sealer and single gutta-percha point by undergraduate student (US), postgraduate student (PS) and endodontist (ED). Twenty-one plastic models of upper premolars were enlarged with HyFlex EDM instruments to a size 40/0.04 taper and randomly divided into three groups (7 teeth/14 canals per group): US, PS and ED. After the obturation of root canals with BioRoot RCS and one HyFlex EDM size 40 gutta-percha point, plastic models were scanned using micro-computed tomography scanner (µCT) SkyScan 1272 at isotropic resolution of 10 µm. The porosity distribution was evaluated separately for the apical, middle and coronal thirds. The Kruskal–Wallis, Mann–Whitney, Friedman and Wilcoxon tests with the significance level set at 5% were used for data analysis. The µCT evaluation revealed open pores being the dominant type of porosity in all experimental groups and root canal thirds, with the highest percentage of pores in the apical third of root canal fillings. The quality and homogeneity of single cone root canals fillings remained similar between the groups in the apical and middle thirds (p > 0.05). Significant differences were observed only in the coronal third (p < 0.05).