Chitosan and Hydroxyapatite Based Biomaterials to Circumvent Periprosthetic Joint Infections

Innovative Marine-Sourced Hydroxyapatite, Chitosan, Collagen, and Gelatin for Eco-Friendly Bone and Cartilage Regeneration

In recent years, the exploration of sustainable alternatives in the field of bone tissue engineering has led researchers to focus on marine waste byproducts as a valuable resource. These marine resources, often overlooked remnants of various industries, exhibit a rich composition of hydroxyapatite, collagen, calcium carbonate, and other minerals essential to the complex framework of bone structure. Marine waste by-products can emit gases such as methane and carbon dioxide, highlighting the urgency to repurpose these materials for innovative tissue regeneration solutions, offering a sustainable approach to address environmental challenges while advancing medical science. Using these discarded materials offers a promising pathway for sustainable development in regenerative medicine. This review investigates the distinctive properties of marine waste byproducts, emphasizing their capacity to be recycled effectively to contribute to the rebuilding of bone and cartilage tissue during regeneration processes. We also highlight the compatibility of these resources with biological materials such as platelet-rich plasma (PRP), stem cells, exosomes, and natural bioproducts, as well as nanoparticles (NPs) and polymers. By using the natural potential of these resources, we simultaneously address environmental challenges and promote innovative solutions in skeletal tissue engineering, initiating a new era of environmentally green biomedical research.

In vitro evaluation of bone cell response to novel 3D-printable nanocomposite biomaterials for bone reconstruction

Critically-sized segmental bone defects represent significant challenges requiring grafts for reconstruction. 3D-printed synthetic bone grafts are viable alternatives to structural allografts if engineered to provide appropriate mechanical performance and osteoblast/osteoclast cell responses. Novel 3D-printable nanocomposites containing acrylated epoxidized soybean oil (AESO) or methacrylated AESO (mAESO), polyethylene glycol diacrylate, and nanohydroxyapatite (nHA) were produced using masked stereolithography. The effects of volume fraction of nHA and methacrylation of AESO on interactions of differentiated MC3T3-E1 osteoblast (dMC3T3-OB) and differentiated RAW264.7 osteoclast cells with 3D-printed nanocomposites were evaluated in vitro and compared with a control biomaterial, hydroxyapatite (HA). Higher nHA content and methacrylation significantly improved the mechanical properties. All nanocomposites supported dMC3T3-OB cells' adhesion and proliferation. Higher amounts of nHA enhanced cell adhesion and proliferation. mAESO in the nanocomposites resulted in greater adhesion, proliferation, and activity at day 7 compared with AESO nanocomposites. Excellent osteoclast-like cells survival, defined actin rings, and large multinucleated cells were only observed on the high nHA fraction (30%) mAESO nanocomposite and the HA control. Thus, mAESO-based nanocomposites containing higher amounts of nHA have better interactions with osteoblast-like and osteoclast-like cells, comparable with HA controls, making them a potential future alternative graft material for bone defect repair.

Comparative Analysis of Calcium and Hydroxyl Ion Release from Pulp Dressing Materials in Pulpotomized Premolars

BACKGROUND The aim of this study was to evaluate the time-dependent release of calcium (Ca⁺⁺) and hydroxyl (OH⁻) ions from 3 different pulp dressing materials used to cap root canal orifices in pulpotomized premolars. MATERIAL AND METHODS Freshly extracted (n=40) premolars were subjected to standardized pulpotomy procedure and finally restored in 5 groups using resin-modified glass ionmmer liner (RMGI) and bonded resin composite directly against the pulp chamber's floor (Control, G2) and over 3 different orifices' capping materials - Dycal (G3), Endo Sequence root repair material (ESRRM, G4), and mineral trioxide aggregate (MTA) Angelus (G5). Another 10 sound premolars served as the Reference group (G1). The restored teeth were incubated at 37±1°C in sealed containers filled with deionized water to assess Ca⁺⁺ and OH⁻ ions release after 24 h and at 1, 4, and 8 weeks. Two-way ANOVA and Tukey's comparisons at alpha=0.05 were used to statistically analyze the collected data. RESULTS Two-way ANOVA revealed significant differences in Ca⁺⁺ ions between test groups at different testing time intervals (P<0.05). Despite the constant (Tukey's, P<0.05) pH levels (OH⁻ release), Group 5 specimens exhibited higher Ca⁺⁺ ion release in comparison to Groups 4 and 3 at different testing timepoints (Tukey's, P<0.05). CONCLUSIONS Although all the assessed pulp dressing materials had equivalent and stable pH levels, ESRRM and MTA-Angelus had the highest Ca⁺⁺ ion release at the assessment intervals.

Polysaccharide-Based Composite Systems in Bone Tissue Engineering: A Review

In recent years, a growing demand for biomaterials has been observed, particularly for applications in bone regenerative medicine. Bone tissue engineering (BTE) aims to develop innovative materials and strategies for repairing and regenerating bone defects and injuries. Polysaccharides, due to their biocompatibility, biodegradability as well as bioactivity, have emerged as promising candidates for scaffolds or composite systems in BTE. Polymers combined with bioactive ceramics can support osteointegration. Calcium phosphate (CaP) ceramics can be a broad choice as an inorganic phase that stimulates the formation of new apatite layers. This review provides a comprehensive analysis of composite systems based on selected polysaccharides used in bone tissue engineering, highlighting their synthesis, properties and applications. Moreover, the applicability of the produced biocomposites has been analyzed, as well as new trends in modifying biomaterials and endowing them with new functionalizations. The effects of these composites on the mechanical properties, biocompatibility and osteoconductivity were critically analyzed. This article summarizes the latest manufacturing methods as well as new developments in polysaccharide-based biomaterials for bone and cartilage regeneration applications.

Bone Regeneration Capabilities of Scaffolds Containing Chitosan and Nanometric Hydroxyapatite-Systematic Review Based on In Vivo Examinations

In this systematic review, the authors aimed to investigate the state of knowledge on in vivo evaluations of chitosan and nanometric hydroxyapatite (nanohydroxyapatite, nHAp) scaffolds for bone-tissue regeneration. In March 2024, an electronic search was systematically conducted across the PubMed, Cochrane, and Web of Science databases using the keywords (hydroxyapatite) AND (chitosan) AND (scaffold) AND (biomimetic). Methodologically, the systematic review followed the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) protocol to the letter. Initially, a total of 375 studies were screened, and 164 duplicates were removed. A further 188 articles were excluded because they did not correspond to the predefined topics, and an additional 3 articles were eliminated due to the inability to obtain the full text. The final compilation included 20 studies. All publications indicated a potential beneficial effect of the scaffolds in in vivo bone defect repair. A beneficial effect of hydroxyapatite as a scaffold component was observed in 16 studies, including greater mechanical resistance, cellular differentiation, and enhanced bone damage regeneration. The addition of chitosan and apatite ceramics, which combined the strengths of both materials, had the potential to become a useful bone-tissue engineering material.

Modern Microbiological Methods to Detect Biofilm Formation in Orthopedy and Suggestions for Antibiotic Therapy, with Particular Emphasis on Prosthetic Joint Infection (PJI)

Biofilm formation is a serious problem that relatively often causes complications in orthopedic surgery. Biofilm-forming pathogens invade implanted foreign bodies and surrounding tissues. Such a condition, if not limited at the appropriate time, often requires reoperation. This can be partially prevented by selecting an appropriate prosthesis material that prevents the development of biofilm. There are many modern techniques available to detect the formed biofilm. By applying them we can identify and visualize biofilm-forming microorganisms. The most common etiological factors associated with biofilms in orthopedics are: Staphylococcus aureus, coagulase-negative Staphylococci (CoNS), and Enterococcus spp., whereas Gram-negative bacilli and Candida spp. also deserve attention. It seems crucial, for therapeutic success, to eradicate the microorganisms able to form biofilm after the implantation of endoprostheses. Planning the effective targeted antimicrobial treatment of postoperative infections requires accurate identification of the microorganism responsible for the complications of the procedure. The modern microbiological testing techniques described in this article show the diagnostic options that can be followed to enable the implementation of effective treatment.

Use of Biomaterials in 3D Printing as a Solution to Microbial Infections in Arthroplasty and Osseous Reconstruction

The incidence of microbial infections in orthopedic prosthetic surgeries is a perennial problem that increases morbidity and mortality, representing one of the major complications of such medical interventions. The emergence of novel technologies, especially 3D printing, represents a promising avenue of development for reducing the risk of such eventualities. There are already a host of biomaterials, suitable for 3D printing, that are being tested for antimicrobial properties when they are coated with bioactive compounds, such as antibiotics, or combined with hydrogels with antimicrobial and antioxidant properties, such as chitosan and metal nanoparticles, among others. The materials discussed in the context of this paper comprise beta-tricalcium phosphate (β-TCP), biphasic calcium phosphate (BCP), hydroxyapatite, lithium disilicate glass, polyetheretherketone (PEEK), poly(propylene fumarate) (PPF), poly(trimethylene carbonate) (PTMC), and zirconia. While the recent research results are promising, further development is required to address the increasing antibiotic resistance exhibited by several common pathogens, the potential for fungal infections, and the potential toxicity of some metal nanoparticles. Other solutions, like the incorporation of phytochemicals, should also be explored. Incorporating artificial intelligence (AI) in the development of certain orthopedic implants and the potential use of AI against bacterial infections might represent viable solutions to these problems. Finally, there are some legal considerations associated with the use of biomaterials and the widespread use of 3D printing, which must be taken into account.

A Systematic Review of Oral Modifications Caused by the Prolonged Application of Continuous Positive Airway Pressure (CPAP) and Intraoral Appliances in Patients with Obstructive Sleep Apnea (OSA)

Objective

Prolonged use of oral devices as a substitute for traditional treatments has been studied in relation to the dental and skeletal changes associated with obstructive sleep apnea syndrome (OSA), which is a sleep-breathing disorder.

Materials and Methods

A review of articles indexed in PubMed, Google Scholar, Cochrane Library, Scopus, Web of Sciences, and CINHAL databases in September 2022 based on MeSH-based keywords with "dental and skeletal" and "oral appliance" and "obstructive sleep apnea" was examined to ensure that the keywords alone or cross-linked, depending on which base of the searched data, were used. 16 articles out of 289 articles were included in the research, and 273 articles were excluded due to lack of study.

Conclusions

CPAP treatment has limited dental or skeletal effects in short-term or long-term use. OAs and MADs show significant dental changes with prolonged use. MAS and TSD are more effective in short-term goals than CPAP. OAs' increase may cause dental and skeletal changes. MPD shows notable cephalometric alterations.

Oral Implantology: Current Aspects and Future Perspectives

In recent years, dental implantology has significantly improved with the development of more advanced techniques which have greatly increased the reliability of dental implant therapy while reducing patient morbidity [...]

3D bioprinting technology to construct bone reconstruction research model and its feasibility evaluation

Objective: To explore and construct a 3D bone remodeling research model displaying stability, repeatability, and precise simulation of the physiological and biochemical environment in vivo. Methods: In this study, 3D bioprinting was used to construct a bone reconstruction model. Sodium alginate (SA), hydroxyapatite (HA) and gelatin (Gel) were mixed into hydrogel as scaffold material. The osteoblast precursor cells MC3T3-E1 and osteoclast precursor cells RAW264.7 were used as seed cells, which may or may not be separated by polycarbonate membrane. The cytokines osteoprotegerin (OPG) and receptor activator of NF-κB ligand (RANKL) were used to induce cell differentiation. The function of scaffolds in the process of bone remodeling was analyzed by detecting the related markers of osteoblasts (alkaline phosphatase, ALP) and osteoclasts (tartrate resistant acid phosphatase, TRAP). Results: The scaffold showed good biocompatibility and low toxicity. The surface morphology aided cell adhesion and growth. The scaffold had optimum degradability, water absorption capacity and porosity, which are in line with the conditions of biological experiments. The effect of induced differentiation of cells was the best when cultured alone. After direct contact between the two types of cells at 2D or 3D level, the induced differentiation of cells was inhibited to varying degrees, although they still showed osteogenesis and osteoclast. After the cells were induced by indirect contact culture, the effect of induced differentiation improved when compared with direct contact culture, although it was still not as good as that of single culture. On the whole, the effect of inducing differentiation at 3D level was the same as that at 2D level, and its relative gene expression and enzyme activity were higher than that in the control group. Hence the scaffold used in this study could induce osteogenesis as well as osteoclast, thereby rendering it more effective in inducing new bone formation. Conclusion: This method can be used to construct the model of 3D bone remodeling mechanism.

Synthesis of Pectin and Eggshell Biowaste-Mediated Nano-hydroxyapatite (nHAp), Their Physicochemical Characterizations, and Use as Antibacterial Material

The current study reports the synthesis of sustainable nano-hydroxyapatite (nHAp) using a wet chemical precipitation approach. The materials used in the green synthesis of nHAp were obtained from environmental biowastes such as HAp from eggshells and pectin from banana peels. The physicochemical characterization of obtained nHAp was carried out using different techniques. For instance, X-ray diffractometer (XRD) and FTIR spectroscopy were used to study the crystallinity and synthesis of nHAp respectively. In addition, the morphology and elemental composition of nHAP were studied using FESEM equipped with EDX. HRTEM showed the internal structure of nHAP and calculated its grain size which was 64 nm. Furthermore, the prepared nHAp was explored for its antibacterial and antibiofilm activity which has received less attention previously. The obtained results showed the potential of pectin-bound nHAp as an antibacterial agent for various biomedical and healthcare applications.

The Importance of Chitosan Coatings in Dentistry

A Chitosan is a copolymer of N-acetyl-D-glucose amine and D-glucose amine that can be easily produced. It is a polymer that is widely utilized to create nanoparticles (NPs) with specific properties for applications in a wide range of human activities. Chitosan is a substance with excellent prospects due to its antibacterial, anti-inflammatory, antifungal, haemostatic, analgesic, mucoadhesive, and osseointegrative qualities, as well as its superior film-forming capacity. Chitosan nanoparticles (NPs) serve a variety of functions in the pharmaceutical and medical fields, including dentistry. According to recent research, chitosan and its derivatives can be embedded in materials for dental adhesives, barrier membranes, bone replacement, tissue regeneration, and antibacterial agents to improve the management of oral diseases. This narrative review aims to discuss the development of chitosan-containing materials for dental and implant engineering applications, as well as the challenges and future potential. For this purpose, the PubMed database (Medline) was utilised to search for publications published less than 10 years ago. The keywords used were "chitosan coating" and "dentistry". After carefully selecting according to these keywords, 23 articles were studied. The review concluded that chitosan is a biocompatible and bioactive material with many benefits in surgery, restorative dentistry, endodontics, prosthetics, orthodontics, and disinfection. Furthermore, despite the fact that it is a highly significant and promising coating, there is still a demand for various types of coatings. Chitosan is a semi-synthetic polysaccharide that has many medical applications because of its antimicrobial properties. This article aims to review the role of chitosan in dental implantology.

Complex Evaluation of Nanocomposite-Based Hydroxyapatite for Biomedical Applications

A magnesium-doped hydroxyapatite in chitosan matrix (MgHApC) sample was developed as a potential platform for numerous applications in the pharmaceutical, medical, and food industries. Magnesium-doped hydroxyapatite suspensions in the chitosan matrix were obtained by the coprecipitation technique. The surface shape and morphological features were determined by scanning electron microscopy (SEM). The hydrodynamic diameter of the suspended particles was determined by Dynamic light scattering (DLS) measurements. The stability of MgHApC suspensions was evaluated by ultrasonic measurements. The hydrodynamic diameter of the MgHApC particles in suspension was 29.5 nm. The diameter of MgHApC particles calculated from SEM was 12.5 ± 2 nm. Following the SEM observations, it was seen that the MgHApC particles have a spherical shape. The Fourier-transform infrared spectroscopy (FTIR) studies conducted on MgHApC proved the presence of chitosan and hydroxyapatite in the studied specimens. In vitro antimicrobial assays were performed on Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231 microbial strains. The antimicrobial experiments showed that MgHApC exhibited very good antimicrobial properties against all the tested microorganisms. More than that, the results of the in vitro studies revealed that the antimicrobial properties of the samples depend on the incubation time. The evaluation of the sample's cytotoxicity was performed using the human colon cancer (HCT-8) cell line. Our results suggested the great potential of MgHApC to be used in future applications in the field of biomedical applications (e.g., dentistry, orthopedics, etc.).

Latest Evidence on Orthognathic Surgery Techniques and Potential Changes in Oral Microbiota related to Intermaxillary Fixation in Orthodontic Patients: A Systematic Review

Background:

Orthognathic surgery is often applied for the correction of facial dysmorphia, and different findings were highlighted regarding the techniques applied. After surgical treatment, intermaxillary fixation is placed, which compromises oral hygiene and, consequently, can lead to increased plaque accumulation and microbiological changes, promoting the proliferation of periodontopathogenic bacteria. Therefore, the aims of the present review are to describe the main evidence from the last 20 years of clinical studies concerning surgical techniques applied to orthognathic surgery and, finally, to analyze potential changes in the oral microbiota.

Materials and Methods:

An electronic search was conducted in the PubMed (MEDLINE) and Scopus databases; the MeSH (Medical Subject Heading) terms are bacteria, dental plaque, evidence-based practice, maxillomandibular fixation, microbiota, operative procedures, and orthognathic surgery.

Results:

At the end of the search process, 31 relevant articles were finally included and analyzed in this systematic review, which has a low risk of bias. Clinical studies on humans have been considered in this review. Based on the studies included it would be preferable to use piezoelectric technology in osteotomies because of its many advantages, “surgery-first” technique allows for results comparable to the standard technique in Class III malocclusions while improving quality of life more rapidly, the “mandible-first” technique seems to have more advantages than the “maxilla-first” technique, Computer-Aided Design and Manufacturing (CAD/CAM) could provide more accurate and precise results, and finally, Laser can be applied with different advantages. Regarding intermaxillary fixation, no long-term increase in the concentration of periodontal bacteria was recorded.

Conclusion:

Several findings still need to be confirmed with reference to the best suturing technique to reconstitute the nasal wing base, the real effectiveness of “surgery-first,” “maxilla-first,” and “mandible-first” approaches in patients with Class III malocclusion, the use of CAD/CAM and Laser, more studies should be conducted to evaluate quantitative and qualitative changes in other microorganisms following intermaxillary fixation.

Treatment of Advanced Gingival Recession Secondary to Surgical Failure with Large Size Deepithelized Gingival Graft Associated with a Modified Tunnel Flap

Objective

To describe the use of a large size deepithelized gingival graft (DGG) associated with full-split tunnel technique in a clinical case of advanced gingival recession secondary to surgical failure (GRSF). Clinical Considerations. The presented case report helped to achieve satisfactory root coverage, ideal keratinized tissue gain, improvement in soft tissue quality and esthetics, scar deformity correction, and vestibular depth deepening with a one-step procedure of large size DGG associated with full-split tunnel technique for a condition of deep gingival recessions of 7-11 mm caused by a failed bone implantation surgery.

Conclusions

The large size DGG associated with full-split tunnel technique provided a versatile one-step procedure to obtain ideal results for advanced GRSF. Clinical Significance. GRSF that is generally associated with inadequate keratinized tissue and scar formation could be rather difficult to deal with. The large size DGG associated with full-split tunnel technique, as a one-step procedure, provided a predictable and practical treatment modality.

Promising Materials in the Fight against Healthcare-Associated Infections: Antibacterial Properties of Chitosan-Polyhedral Oligomeric Silsesquioxanes Hybrid Hydrogels

New technologies and materials could help in this fight against healthcare-associated infections. As the majority of these infections are caused by antibiotic-resistant bacteria, the development of materials with intrinsic antibacterial properties is a promising field of research. We combined chitosan (CS), with antibacterial properties, with polyhedral oligomeric silsesquioxanes (POSS), a biocompatible polymer with physico-chemical, mechanical, and rheological properties, creating a hydrogel using cross-linking agent genipin. The antibacterial properties of CS and CS-POSS hydrogels were investigated against nosocomial Gram-positive and Gram-negative bacteria both in terms of membrane damage and surface charge variations, and finally, the anti-biofilm property was studied through confocal microscopy. Both materials showed a good antibacterial capacity against all analyzed strains, both in suspension, with % decreases between 36.36 and 73.58 for CS and 29.86 and 66.04 for CS-POSS, and in plates with % decreases between 55.29 and 78.32 and 17.00 and 53.99 for CS and CS-POSS, respectively. The treated strains compared to the baseline condition showed an important membrane damage, which also determined a variation of surface charges, and finally, for both hydrogels, a remarkable anti-biofilm property was highlighted. Our findings showed a possible future use of these biocompatible materials in the manufacture of medical and surgical devices with intrinsic antibacterial and anti-biofilm properties.

A systematic review of natural products for skin applications: Targeting inflammation, wound healing, and photo-aging

BACKGROUND

Every day the skin is constantly exposed to several harmful factors that induce oxidative stress. When the cells are incapable to maintain the balance between antioxidant defenses and reactive oxygen species, the skin no longer can keep its integrity and homeostasis. Chronic inflammation, premature skin aging, tissue damage, and immunosuppression are possible consequences induced by sustained exposure to environmental and endogenous reactive oxygen species. Skin immune and non-immune cells together with the microbiome are essential to efficiently trigger skin immune responses to stress. For this reason, an ever-increasing demand for novel molecules capable of modulating immune functions in the skin has risen the level of their development, particularly in the field of natural product-derived molecules.

PURPOSE

In this review, we explore different classes of molecules that showed evidence in modulate skin immune responses, as well as their target receptors and signaling pathways. Moreover, we describe the role of polyphenols, polysaccharides, fatty acids, peptides, and probiotics as possible treatments for skin conditions, including wound healing, infection, inflammation, allergies, and premature skin aging.

METHODS

Literature was searched, analyzed, and collected using databases, including PubMed, Science Direct, and Google Scholar. The search terms used included "Skin", "wound healing", "natural products", "skin microbiome", "immunomodulation", "anti-inflammatory", "antioxidant", "infection", "UV radiation", "polyphenols", "polysaccharides", "fatty acids", "plant oils", "peptides", "antimicrobial peptides", "probiotics", "atopic dermatitis", "psoriasis", "auto-immunity", "dry skin", "aging", etc., and several combinations of these keywords.

RESULTS

Natural products offer different solutions as possible treatments for several skin conditions. Significant antioxidant and anti-inflammatory activities were reported, followed by the ability to modulate immune functions in the skin. Several membrane-bound immune receptors in the skin recognize diverse types of natural-derived molecules, promoting different immune responses that can improve skin conditions.

CONCLUSION

Despite the increasing progress in drug discovery, several limiting factors need future clarification. Understanding the safety, biological activities, and precise mechanisms of action is a priority as well as the characterization of the active compounds responsible for that. This review provides directions for future studies in the development of new molecules with important pharmaceutical and cosmeceutical value.

Calcium Phosphate Cements as Carriers of Functional Substances for the Treatment of Bone Tissue

Interest in calcium phosphate cements as materials for the restoration and treatment of bone tissue defects is still high. Despite commercialization and use in the clinic, the calcium phosphate cements have great potential for development. Existing approaches to the production of calcium phosphate cements as drugs are analyzed. A description of the pathogenesis of the main diseases of bone tissue (trauma, osteomyelitis, osteoporosis and tumor) and effective common treatment strategies are presented in the review. An analysis of the modern understanding of the complex action of the cement matrix and the additives and drugs distributed in it in relation to the successful treatment of bone defects is given. The mechanisms of biological action of functional substances determine the effectiveness of use in certain clinical cases. An important direction of using calcium phosphate cements as a carrier of functional substances is the volumetric incorporation of anti-inflammatory, antitumor, antiresorptive and osteogenic functional substances. The main functionalization requirement for carrier materials is prolonged elution. Various release factors related to the matrix, functional substances and elution conditions are considered in the work. It is shown that cements are a complex system. Changing one of the many initial parameters in a wide range changes the final characteristics of the matrix and, accordingly, the kinetics. The main approaches to the effective functionalization of calcium phosphate cements are considered in the review.

Personalized Treatment of Periodontitis in a Patient with McArdle's Disease: The Benefits from Probiotics

Introduction

McArdle's disease is a severe glycogen storage disease characterized by intolerance to exercise; patients have a syndrome of muscle intolerance to stress, associated with myalgia, cramps, fatigue, and muscle weakness. Periodontal disease is a multifactorial pathology of the supporting tissues of the teeth: one of the main factors is the formation of bacterial biofilm; its control favors the prevention and the maintenance of good health of the oral cavity; and some systemic pathologies can worsen the periodontal disease and hinder its therapy. This case report concerns a woman with McArdle's disease diagnosed with periodontal disease. Material and Methods. A 54-year-old female patient with McArdle's disease has been diagnosed with Stage 3 generalized periodontitis, Grade B. At the baseline, the patient had 82 pockets with probing pocket depth (PPD) equal to or greater than 4 mm. The patient was instructed in the correct methods of oral hygiene and was advised toothpaste and mouthwash based on probiotics; subsequently, a debridement was performed to remove etiological factors using Dental-Biofilm Detection Topographic Technique (D-BioTECH).

Results

After 60 days, the number of pockets was reduced from 82 to 14 overall with PPD ≥ 4 mm and from 50 to 2 pockets with PPD ≥ 5 mm. Full mouth bleeding score (FMBS) increased from 48% to 15% and full mouth plaque score (FMPS) from 73% to 15%.

Conclusions

In this case, the use of a correct brushing method combined with the D-BioTECH has reduced the disease state, with the use of probiotics at home to restore and maintain a healthy oral microbiome.

Monitoring In Vitro Extracellular Matrix Protein Conformations in the Presence of Biomimetic Bone-Regeneration Scaffolds Using Functionalized Gold-Edge-Coated Triangular Silver Nanoparticles

In the cellular environment, high noise levels, such as fluctuations in biochemical reactions, protein variability, molecular diffusion, cell-to-cell contact, and pH, can both mediate and interfere with cellular functions. In this work, gold edge-coated triangular silver nanoparticles (AuTSNP) were validated as a promising new tool to indicate protein conformational transitions in cultured cells and to monitor essential protein activity in the presence of an optimized bone biomimetic chitosan-based scaffold whose rational design mimics the ECM as a natural scaffold. A chitosan-based scaffold formulation with hydroxyapatite (CS/HAp) was selected due to its promising features for orthopedic applications, including combined high mechanical strength biocompatibility and biodegradability. Functionalized AuTSNP-based tests with the model ECM protein, fibronectin (Fn), illustrate that the protein interactions can be clearly sensed over time through the local surface plasmon resonance (LSPR) technique. This demonstrates that AuTNSP are a powerful tool to detect protein conformational activity in the presence of biomimetic bone tissue regeneration scaffolds within a cellular environment that comprises a diversity of molecular cues.

Recent advances in prevention, detection and treatment in prosthetic joint infections of bioactive materials

Prosthetic joint infection (PJI) is often considered as one of the most common but catastrophic complications after artificial joint replacement, which can lead to surgical failure, revision, amputation and even death. It has become a worldwide problem and brings great challenges to public health systems. A small amount of microbe attaches to the graft and forms a biofilm on its surface, which lead to the PJI. The current standard methods of treating PJI have limitations, but according to recent reports, bioactive materials have potential research value as a bioactive substance that can have a wide range of applications in the field of PJI. These include the addition of bioactive materials to bone cement, the use of antibacterial and anti-fouling materials for prosthetic coatings, the use of active materials such as bioactive glasses, protamine, hydrogels for prophylaxis and detection with PH sensors and fluorescent-labelled nanoparticles, and the use of antibiotic hydrogels and targeting delivery vehicles for therapeutic purposes. This review focus on prevention, detection and treatment in joint infections with bioactive materials and provide thoughts and ideas for their future applications.

Impact of Gamma Irradiation on the Properties of Magnesium-Doped Hydroxyapatite in Chitosan Matrix

This is the first report regarding the effect of gamma irradiation on chitosan-coated magnesium-doped hydroxyapatite (x_Mg = 0.1; 10 MgHApCh) layers prepared by the spin-coating process. The stability of the resulting 10 MgHApCh gel suspension used to obtain the layers has been shown by ultrasound measurements. The presence of magnesium and the effect of the irradiation process on the studied samples were shown by X-ray photoelectron spectroscopy (XPS). The XPS results obtained for irradiated 10 MgHApCh layers suggested that the magnesium and calcium contained in the surface layer are from tricalcium phosphate (TCP; Ca₃(PO₄)₂) and hydroxyapatite (HAp). The XPS analysis has also highlighted that the amount of TCP in the surface layer increased with the irradiation dose. The energy-dispersive X-ray spectroscopy (EDX) evaluation showed that the calcium decreases with the increase in the irradiation dose. In addition, a decrease in crystallinity and crystallite size was highlighted after irradiation. By atomic force microscopy (AFM) we have obtained images suggesting a good homogeneity of the surface of the non-irradiated and irradiated layers. The AFM results were also sustained by the scanning electron microscopy (SEM) images obtained for the studied samples. The effect of gamma-ray doses on the Fourier transform infrared spectroscopy (ATR-FTIR) spectra of 10 MgHApCh composite layers was also evaluated. The in vitro antifungal assays proved that 10 MgHApCh composite layers presented a strong antifungal effect, correlated with the irradiation dose and incubation time. The study of the stability of the 10 MgHApCh gel allowed us to achieve uniform and homogeneous layers that could be used in different biomedical applications.

Composite Coatings for Osteoblast Growth Attachment Fabricated by Matrix-Assisted Pulsed Laser Evaporation

The bioactive and biocompatible properties of hydroxyapatite (HAp) promote the osseointegration process. HAp is widely used in biomedical applications, especially in orthopedics, as well as a coating material for metallic implants. We obtained composite coatings based on HAp, chitosan (CS), and FGF2 by a matrix-assisted pulsed laser evaporation (MAPLE) technique. The coatings were physico-chemically investigated by means of X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Infrared Microscopy (IRM), and Scanning Electron Microscopy (SEM). Further, biological investigations were performed. The MAPLE-composite coatings were tested in vitro on the MC3T3-E1 cell line in order to endorse cell attachment and growth without toxic effects and to promote pre-osteoblast differentiation towards the osteogenic lineage. These coatings can be considered suitable for bone tissue engineering applications that lack toxicity and promotes cell adhesion and proliferation while also sustaining the differentiation of pre-osteoblasts towards mature bone cells.

Green synthesis of bioinspired chitosan-ZnO-based polysaccharide gums hydrogels with propolis extract as novel functional natural biomaterials

A facile, green synthesis methodology to obtain zinc oxide nanoparticles using three polysaccharide gums (Acacia gum, Guar gum and Xanthan gum) of biological origin was developed. Subsequently, biosynthesized zinc oxide nanoparticles were incorporated into a sustainable chitosan hydrogel matrix functionalized with propolis extract. This study has revealed that the selected polysaccharides as chelates represents a suitable approach to synthesize ZnO nanoparticles of particular interest with controlled morphology. The formation of ZnO nanoparticles using polysaccharide gums was confirmed by FTIR, XRD, UV-Vis spectroscopy, thermal analysis, SEM, Raman and photoluminescence spectroscopies. The rheological behaviour of obtained hydrogels was evaluated. The AFM studies demonstrate that all synthesized chitosan incorporated ZnO composites hydrogels functionalized with propolis extract exhibit corrugated topographies. The present study highlights the possible incorporation of various guest molecules into hydrogel matrix due to its tuneable morphologies. The obtained hydrogel composites were cytocompatible in L929 fibroblast cell culture, in a range of concentrations between 50 and 1000 μg/mL, as assessed by MTT, LDH and Live/Dead double staining assays. By enhancing the biological properties, these novel green hydrogels show attractive superior performance in a wide concentration range to develop future in vivo suitable natural platforms as effective delivery systems of pharmacologic agents for biomedical applications.

Management of the palato-radicular groove with a periodontal regenerative procedure and prosthodontic treatment: A case report

BACKGROUND

Palato-radicular groove (PRG) is defined as an anomalous formation of teeth. The etiology of PRG remains unclear. The prognosis of a tooth with a PRG is unfavorable. The treatment of combined periodontal-endodontic lesions requires multidisciplinary management to control the progression of bone defects. Some researchers reported cases that had short-term observations. The management of teeth with PRGs is of great clinical significance. However, to date, no case reports have been documented on the use of bone regeneration and prosthodontic treatment for PRGs.

CASE SUMMARY

This case reported the management of a 40-year-old male patient with the chief complaint of slight mobility and abscess in the upper right anterior tooth for 15 d and was diagnosed with type II PRG of tooth 12 with combined endodontic-periodontal lesions. The accumulation of plaque and calculus caused primary periodontitis and a secondary endodontic infection. A multidisciplinary management approach was designed that included root canal therapy, groove sealing, a periodontal regenerative procedure, and prosthodontic treatment. During a 2-year follow-up period, a good prognosis was observed.

CONCLUSION

This report indicates that bone regeneration and prosthodontic treatment may contribute to the long-term favorable prognosis of teeth with PRGs.

Effect of an "Autogenous Leukocyte Platelet-Rich Fibrin Tooth Graft" Combination around Immediately Placed Implants in Periodontally Compromised Sites: A Randomized Clinical Trial

Objective

Autogenous tooth bone graft (ATBG) was suggested as a source for bone grafting materials, especially as they have similar chemical composition to bone. This study goal was to assess the clinical and radiographic consequences of ATBG with or without L-PRF on bone deposition around immediate implants placed in periodontally hopeless sites.

Materials and Methods

26 patients, with periodontally diseased teeth, underwent random assignment to receive the surgical protocol either with L-PRF over ATBG around immediately inserted implants (test group) or without it (control group). Clinical examination was observed. Radiographically, bone changes horizontally and vertically to determine marginal bone loss (MBL) and mesiodistal bone changes were made at the base line and 6 and 9 months after implant insertion. Statistical analysis utilizing paired Student's t-test was used for comparing results within the same group, whereas an independent-sample t-test was used for intergroup variable comparison.

Results

All implants met the criteria of success without any complications at the follow-up period. Nonsignificant differences were detected between horizontal bone alterations in both groups at 6 and 9 months (P > .001). The test group showed statistically significant lower MBL than the control group (P < .001). The mesiodistal bone gain in the test group was significantly higher than that of the control group at the 6-month period (P < .001). The mesiodistal bone loss in the control group was significantly higher than that of the test group at the 9-month period (P < .001).

Conclusion

The ATBG- L-PRF combination therapy enhances new bone formation and appeared to be a favorable procedure with immediate implant placement, particularly in severe periodontitis cases.

Perspectives on Dental Caries: A Cross-Sectional Study among Parents of Primary School Children in Saudi Arabia

Background:

Dental caries is one of the most prevalent chronic childhood diseases affecting many people worldwide. Many people do not recognize the early signs of dental caries or its causes, which is crucial for the prevention and early intervention of the disease and consequently less-invasive and cheaper treatment options.

Objective:

This study aimed to evaluate the perspectives of parents about the meaning, causes, and early signs of dental caries, the association of tooth discoloration with decay, and the effect of different socio-demographic variables on the knowledge of patients regarding caries.

Methods:

Questionnaires were distributed to parents of primary school children in the region of Madinah, Saudi Arabia. Meaning of dental caries, early signs, causes of tooth discoloration related to decay, and the effect of different socio-demographic variables were calculated. Multiple linear regression analysis was carried out to identify significant predictor variables associated with caries knowledge scores.

Results:

There was a total of 2690 respondents. The majority had average caries knowledge scores. Lighter shades of tooth discoloration were reported to be associated with stains and warranted home care only, while darker shades were associated with caries and yielded a necessity for a visit to the dentist. Different socio-demographic variables had an effect on the caries knowledge of the parents.

Conclusion:

There is a need for increased knowledge about the early signs of dental caries among parents. Delayed recognition of signs of dental caries has a detrimental effect on the teeth of children and leads to seeking dental care at the later stages of the disease process. Community-oriented programs are fundamental for improving caries knowledge, its clinical presentations starting from its early signs, causes, and prevention.

Perspectives on Dental Caries: A Cross-Sectional Study among Parents of Primary School Children in Saudi Arabia

Background:

Dental caries is one of the most prevalent chronic childhood diseases affecting many people worldwide. Many people do not recognize the early signs of dental caries or its causes, which is crucial for the prevention and early intervention of the disease and consequently less-invasive and cheaper treatment options.

Objective:

This study aimed to evaluate the perspectives of parents about the meaning, causes, and early signs of dental caries, the association of tooth discoloration with decay, and the effect of different socio-demographic variables on the knowledge of patients regarding caries.

Methods:

Questionnaires were distributed to parents of primary school children in the region of Madinah, Saudi Arabia. Meaning of dental caries, early signs, causes of tooth discoloration related to decay, and the effect of different socio-demographic variables were calculated. Multiple linear regression analysis was carried out to identify significant predictor variables associated with caries knowledge scores.

Results:

There was a total of 2690 respondents. The majority had average caries knowledge scores. Lighter shades of tooth discoloration were reported to be associated with stains and warranted home care only, while darker shades were associated with caries and yielded a necessity for a visit to the dentist. Different socio-demographic variables had an effect on the caries knowledge of the parents.

Conclusion:

There is a need for increased knowledge about the early signs of dental caries among parents. Delayed recognition of signs of dental caries has a detrimental effect on the teeth of children and leads to seeking dental care at the later stages of the disease process. Community-oriented programs are fundamental for improving caries knowledge, its clinical presentations starting from its early signs, causes, and prevention.

Waste-derived biomaterials as building blocks in the biomedical field

Recent developments in the biomedical arena have led to the fabrication of innovative biomaterials by utilizing bioactive molecules obtained from biological wastes released from fruit and beverage processing industries, and fish, meat, and poultry industries. These biological wastes that end up in water bodies as well as in landfills are an affluent source of animal- and plant-derived proteins, bio ceramics and polysaccharides such as collagens, gelatins, chitins, chitosans, eggshell membrane proteins, hydroxyapatites, celluloses, and pectins. These bioactive molecules have been intricately designed into scaffolds and dressing materials by utilizing advanced technologies for drug delivery, tissue engineering, and wound healing relevance. These biomaterials are environment-friendly, biodegradable, and biocompatible, and show excellent tissue regeneration attributes. Additionally, being cost-effective they can reduce the burden on the healthcare system as well as provide a sustainable solution to waste management. In this review, the current trends in the utilization of plant and animal waste-derived biomaterials in various biomedical fields are considered along with a separate section on their applications as xenografts.

Orthodontically Induced External Apical Root Resorption in Class II Malocclusion

Orthodontic-induced external apical root resorption is one of the idiopathic phenomena as an effect, with force generated through mechanotherapy as the cause and the biological tissues with their diversified variations as witness. It is also classified as iatrogenic as a result of indeterminate application of orthodontic forces with subconscious appreciation of the existing underlying conditions. Numerous factors were identified to relate to this irreversible pathologic condition, but none were proven scientifically. Genetics and salivary markers have proved the reliability with time, but the application became insignificant limiting mostly to the research field. Different assessment methods were also identified to clinically diagnose it both subjectively and objectively. Mostly, it is identified through routine radiographic stage records like orthopantomogram or certain prediction radiographs for root resorption probability assessment like in this case. This case report discusses one such encounter which was experienced after stage 1 and 2 mechanics involving quite a few teeth. Considering the biotype of the individual and tooth morphology, the ongoing treatment was terminated and recovery measures were briefed to uplift the self-esteem of the individual. Furthermore, the prognosis is compromised to be very poor with unpredictability to any other treatment modalities.

Effectiveness of a Nanohydroxyapatite-Based Hydrogel on Alveolar Bone Regeneration in Post-Extraction Sockets of Dogs with Naturally Occurring Periodontitis

Pathological mandibular fracture after dental extraction usually occurs in dogs with moderate to severe periodontitis. A nanohydroxyapatite-based hydrogel (HAP hydrogel) was developed to diminish the limitations of hydroxyapatite for post-extraction socket preservation (PSP). However, the effect of the HAP hydrogel in dogs has still not been widely investigated. Moreover, there are few studies on PSP in dogs suffering from clinical periodontitis. The purpose of this study was to evaluate the effectiveness of the HAP hydrogel for PSP in dogs with periodontitis. In five dogs with periodontitis, the first molar (309 and 409) of each hemimandible was extracted. Consequently, all the ten sockets were filled with HAP-hydrogel. Intraoral radiography was performed on the day of operation and 2, 4, 8 and 12 weeks post operation. The Kruskal-Wallis test and paired t-test were adopted for alveolar bone regeneration analysis. The results demonstrated that the radiographic grading, bone height measurement, and bone regeneration analysis were positively significant at all follow-up times compared to the day of operation. Moreover, the scanning electron microscopy with energy-dispersive X-ray spectroscopy imaging after immersion showed a homogeneous distribution of apatite formation on the hydrogel surface. Our investigation suggested that the HAP hydrogel effectively enhances socket regeneration in dogs with periodontitis and can be applied as a bone substitute for PSP in veterinary dentistry.

Fabrication of Novel Chitosan–Hydroxyapatite Nanostructured Thin Films for Biomedical Applications

In this study, we develop chitosan–hydroxyapatite (CS–HAp) composite layers that were deposited on Si substrates in radio frequency (RF) magnetron sputtering discharge in argon gas. The composition and structure of CS–HAp composite layers were investigated by analytical techniques, such as Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), metallographic microscopy (MM), and atomic force microscopy (AFM). On the other hand, in the present study the second order derivative of FT-IR–ATR spectra, for compositional analyses of CS–HAp, were used. The SEM, MM, and AFM data have shown the formation of CS–HAp composite layers. The surface of CS–HAp composite layers showed uniform growth (at an Ar gas working pressure of p = 2 × 10−3 mbar). The surface of the CS–HAp composites coatings became more nanostructured, becoming granular as the gas pressure increased from 5 × 10−3 to 1.2 × 10−2 mbar. However, our studies revealed that the surface morphology of the CS–HAp composite layers varies with the Ar gas working pressure. At the same time, optical properties are slightly influenced by Ar pressure. Their unique physicochemical properties make them suitable for various applications in the biomedical field, if we consider the already proven antimicrobial properties of chitosan. The antifungal properties and the capacity of the CS–HAp composite layers to inhibit the development of fungal biofilms were also demonstrated using the Candida albicans ATCC 10231 (C. albicans) fungal strain.

Chitosan films and scaffolds for regenerative medicine applications: A review

Over the last years, chitosan has demonstrated unparalleled characteristics for regenerative medicine applications. Beside excellent antimicrobial and wound healing properties, this polysaccharide biopolymer offers favorable characteristics such as biocompatibility, biodegradability, and film and fiber-forming capabilities. Having plentiful active amine groups, chitosan can be also readily modified to provide auxiliary features for growing demands in regenerative medicine, which is constantly confronted with new problems, necessitating the creation of biocompatible, immunogenic and biodegradable film/scaffold composites. A new look at the chitosan composites structure/activity/application tradeoff is the primary focus of the current review, which can help researchers to detect the bottlenecks and overcome the shortcomings that arose from this intersection. In the current review, the most recent advances in chitosan films and scaffolds in terms of preparation techniques and modifying methods for improving their functional properties, in three major biomedical fields i.e., tissue engineering, wound healing, and drug delivery are surveyed and discussed.

Design of 3D Scaffolds for Hard Tissue Engineering: From Apatites to Silicon Mesoporous Materials

Advanced bioceramics for bone regeneration constitutes one of the pivotal interests in the multidisciplinary and far-sighted scientific trajectory of Prof. Vallet Regí. The different pathologies that affect osseous tissue substitution are considered to be one of the most important challenges from the health, social and economic point of view. 3D scaffolds based on bioceramics that mimic the composition, environment, microstructure and pore architecture of hard tissues is a consolidated response to such concerns. This review describes not only the different types of materials utilized: from apatite-type to silicon mesoporous materials, but also the fabrication techniques employed to design and adequate microstructure, a hierarchical porosity (from nano to macro scale), a cell-friendly surface; the inclusion of different type of biomolecules, drugs or cells within these scaffolds and the influence on their successful performance is thoughtfully reviewed.

Etching Patterns of Self-Etching Primers in Relation to Shear Bond Strength on Unground Enamel Samples

It was the intention of the study to evaluate the etching effects of several self-etching primers on unground enamel and their relevance for shear bond strength testing. Seven self-etching primers (Clearfil SE, Futurabond NR, M-Bond, One Coat, Optibond, Transbond SEP+, Xeno III) and a conventional 35% phosphoric gel acid were applied to bovine incisors according to the manufacturer's instructions. All specimens were analyzed by electron microscopy. A visual four-step grading was used for the characterization of the macroscopic (5000×) and microscopic (20,000×) etching patterns. In addition, shear bond strength for all the products was tested with an Instron 3344 after 1000 thermocycles between 5 °C and 55 °C. Statistical analysis was carried out using Kruskal-Wallis with Dunn's post-test and Pearson's correlation coefficient. Very strong etching patterns with well-defined prisms were found for the conventional etching, Transbond SEP+, and to a lesser degree, for Xeno III. Clearfil SE and Futurabond NR revealed moderate etching patterns, and M-Bond, One Coat, and Optibond revealed very weak etching patterns. The bond strength correlated well with the etching patterns. The highest shear strength was obtained with conventional etching and Transbond SEP+, followed by Clearfil SE. Moderate shear bond strengths were found for Xeno III, Futurabond NR, One Coat, and M-Bond, and the lowest were found with Optibond.

Type 1 Diabetic Patients After Simultaneous Pancreas and Kidney Transplantation Have Less Intense Periodontal Inflammation Compared to Kidney Recipients Treated with Insulin

BACKGROUND Long-term diabetes predisposes to pathological changes in periodontal tissues. Improvement in this respect can be expected in patients after pancreas transplantation. The aim of this study was to assess and compare the intensity of periodontium pathological lesions and inflammation markers concentration in gingival crevicular fluid (GCF) in patients with type 1 diabetes (T1D) after kidney (KTx) or simultaneous pancreas and kidney transplantation (SPK). MATERIAL AND METHODS The study included 20 T1D patients after SPK and 16 after KTx, and 15 non-diabetic kidney recipients (control). Periodontal clinical parameters and concentration of selected biochemical markers of inflammation in GCF were assessed. The following tests were used in statistical data analysis: Shapiro-Wilk test, the t test, the Mann-Whitney U tests, one-way ANOVA with Tukey's post hoc test, and χ² test (also with Yate's correction). Moreover, linear regression and Pearson or Spearman correlation coefficient was used. RESULTS There were no differences in modified Sulcus Bleeding Index (mSBI) and GCF volume between the SPK group and control group, whereas values of these parameters in the KTx group were higher than in the SPK and control groups. Maximal clinical attachment loss and pocket depth and Periotest values were higher in diabetic recipients compared to controls, and did not differ between SPK and KTx. The concentration of IL-1ß, MMP-8, resistin, TNFalpha, and YKL40 in the GCF in the KTx group was higher than in the SPK and control groups. In the combined group of T1D patients, there was a correlation between blood HbA1c and mSBI, GCF volume, and resistin, TNF-alpha and YKL40 concentrations, and between resistin concentration and mSBI. CONCLUSIONS T1D patients after SPK show lower levels of inflammatory markers in GCF and present reduced intensity of periodontitis compared to kidney recipients treated with insulin. The severity of morphological changes in periodontium in T1D patients after KTx or SPK is higher than in non-diabetic kidney recipients.

Novel Silver-Functionalized Poly(ε-Caprolactone)/Biphasic Calcium Phosphate Scaffolds Designed to Counteract Post-Surgical Infections in Orthopedic Applications

In this study, we designed and developed novel poly(ε-caprolactone) (PCL)-based biomaterials, for use as bone scaffolds, through modification with both biphasic calcium phosphate (BCP), to impart bioactive/bioresorbable properties, and with silver nitrate, to provide antibacterial protection against Staphylococcus aureus, a microorganism involved in prosthetic joint infections (PJIs). Field emission scanning electron microscopy (FESEM) showed that the samples were characterized by square-shaped macropores, and energy dispersive X-ray spectroscopy analysis confirmed the presence of PCL and BCP phases, while inductively coupled plasma-mass spectrometry (ICP-MS) established the release of Ag+ in the medium (~0.15-0.8 wt% of initial Ag content). Adhesion assays revealed a significant (p < 0.0001) reduction in both adherent and planktonic staphylococci on the Ag-functionalized biomaterials, and the presence of an inhibition halo confirmed Ag release from enriched samples. To assess the potential outcome in promoting bone integration, preliminary tests on sarcoma osteogenic-2 (Saos-2) cells indicated PCL and BCP/PCL biocompatibility, but a reduction in viability was observed for Ag-added biomaterials. Due to their combined biodegrading and antimicrobial properties, the silver-enriched BCP/PCL-based scaffolds showed good potential for engineering of bone tissue and for reducing PJIs as a microbial anti-adhesive tool used in the delivery of targeted antimicrobial molecules, even if the amount of silver needs to be tuned to improve osteointegration.

An Evaluation of Microbial Flora, Alkaline Phosphatase and IL-8 Levels in GCF of Orthodontic Patients with Self-Ligating and Conventional Brackets

PURPOSE

To compare the microbial flora, alkaline phosphatase (ALP) and interleukin-8 (IL-8) levels during orthodontic treatment with self-ligating brackets versus conventional brackets.

PATIENTS AND METHODS

Forty patients were included in this study and distributed equally between two groups. One group received conventional edgewise brackets while the other group received DAMON self-ligating brackets. Periodontal parameters were recorded and biochemical and microbial analyses were conducted before bonding (baseline), and 14, 30, and 45 days after bonding. Paired t-test was performed to estimate the intergroup differences from the baseline at the various time points; unpaired t-test was used for intragroup comparisons.

RESULTS

A significantly higher prevalence of gram-negative as well as gram-positive microorganisms was found in the group with conventional brackets than that with self-ligating brackets. Alkaline phosphatase (ALP) activity and interleukin-8 (IL-8) levels were significantly higher in the gingival crevicular fluid of the group with conventional brackets than that with self-ligating brackets.

CONCLUSION

The conventional bracket-ligature technique exhibited an increase in IL-8 levels, ALP activity, and microbial colonization compared with that of the self-ligature technique. Accordingly, self-ligating brackets are recommended in orthodontic patients to improve periodontal health and minimize damage outcomes of periodontal tissue interventions.

Biomaterials and technologies in the management of periprosthetic infection after total hip arthroplasty: An updated review

Although total hip arthroplasty (THA) is considered one of the most efficacious procedures for managing various hip conditions, failures due to different mechanisms are still being reported. Periprosthetic joint infection (PJI) is one of the devastating causes of failure and revision of THA. PJI carries a burden on the patient, the surgeon, and the health-care system. The diagnosis and management of PJIs carry many morbidities and increased treatment costs. The development of PJI is multifactorial, including issues related to the patient’s general condition, the surgeon’s efficiency, surgical technique, and the implants used. Recent advances in the area of diagnosis and predicting PJI as well as introducing new technologies and biomaterials update for the prevention and treatment of PJI. Local implant coatings, advancement in the bearing surfaces technologies, and new technologies such as immunotherapy and bacteriophage therapy were introduced and suggested as contemporary PJI eradication solutions. In this review, we aimed at discussing some of the newly introduced materials and technologies for the sake of PJI control.

The Effect of Mouthrinse with 0.05% Dexamethasone Solution on the Oral Bacterial Community of Oral Lichen Planus Patients: Prospective Pilot Study

Few studies have already been performed to assess oral bacteria during steroid therapy for oral lichen planus (OLP). Thus, the aim of our study was to analyze the effect of dexamethasone mouthrinse treatment on the oral bacteria of OLP patients. This prospective study was conducted on patients who were diagnosed with OLP and treated with 0.05% dexamethasone mouthrinse twice per day for 4 weeks. Using unstimulated saliva of the patients before and after treatment, the qualitative and quantitative changes in oral bacteria were analyzed using quantitative real-time polymerase chain reaction (qPCR). The qPCR results were analyzed using Wilcoxon signed-rank test to the quantitative changes with dexamethasone mouthrinse. The statistical significance was considered at a level of 0.05. In total, 20 patients were enrolled in this study, wherein all were noted to show improved symptoms of OLP. Fifteen patients (75%) had a qualitative change in the oral microbial species and an improved relative periodontitis risk score (from 26.1 ± 10.7 to 20.9 ± 9.2; p = 0.008). However, quantitative changes in all species were determined to be not statistically different before and after the treatment. Most OLP patients had a changed microbial community composition after 0.05% dexamethasone mouthrinse for 4 weeks. In particular, the composition of the periodontopathic bacteria was improved after the treatment.

Effect of the addition of Chitosan and TiO2nanoparticles on antibacterial properties of an orthodontic composite in fixed orthodontic treatment: a randomized clinical trial study

Due to the existing demands for methods independent of patient co-operation in preventing and overcoming the incidence of white spot lesions (WSLs) and caries in fixed orthodontic treatments, several studies have considered the modification of orthodontic composites using antimicrobial nanomaterials. In this regard, the aim of this study is to investigate the effect of the addition of chitosan nanoparticles (NPs) and TiO₂NPs onStreptococcus mutans(S. mutans) counts and the enamel mineral content in fixed orthodontic patients. A double-blind randomized clinical trial study was carried out in 24 patients (i.e., 48 upper second premolars and 48 maxillary lateral incisors) who were candidates for fixed orthodontic treatment. In the case of the control group, the bracket was bonded to the tooth with an orthodontic adhesive (Transbond XT, 3M Unitek, USA) while, in the experimental group, the bracket was bonded to the tooth with Transbond XT containing 1% chitosan NPs and 1% TiO₂NPs. For the maxillary lateral incisor and upper second premolar teeth, theS. mutanscounts around the brackets were measured, through the usage of real-time PCR, at the time points of 1 day, 2 months, and 6 months after bonding the brackets to the tooth. Furthermore, the enamel mineral content measurement was also performed around the brackets at 1 day, 2 months, and 6 months after bonding the brackets to the tooth. TheS. mutanscounts were analyzed using Friedman and Mann-Whitney U tests. The Repeated measures ANOVA test and Independent samples T-test were also applied, in order to evaluate the mineral content. According to the results, there was a significant reduction in theS. mutanscounts of experimental group at the time points of 1 day, 2 months, and 6 months in both maxillary lateral incisor and upper second premolar teeth. However, we did not observe any significant differences in the control group between the reports at 1 day, 2 months, and 6 months in both maxillary lateral incisor and upper second premolar teeth. The outcomes of this study indicate that, with regard to maxillary lateral incisor teeth, there were no significant differences between the results of the experimental group and control group at the time points of 1 day, 2 months, and 6 months. Furthermore, with respect to the upper second premolar teeth, no significant differences were observed between the two groups at 1 day and 2 months; however,S. mutanscounts were significantly lower in the experimental group than in the control group at the time point of 6 months. Moreover, our gathered data confirmed the absence of any significant differences between the experimental group and control group, in terms of enamel mineral content, at the time intervals of 1 day, 2 months, and 6 months. In conclusion, the incorporation of chitosan NPs and TiO₂NPs in orthodontic composites induces an antibacterial property in the resultant adhesive to be used for fixed orthodontic treatment.

Dentin-Derived-Barrier Membrane in Guided Bone Regeneration: A Case Report

An autogenous, demineralized, dentin matrix is a well-known osteo-inductive bone substitute that is mostly composed of type I collagen and is widely used in implant dentistry. This single case report describes a successful outcome in guided bone regeneration and dental implantation with a novel human-derived collagen membrane. The authors fabricated a dentin-derived-barrier membrane from a block-type autogenous demineralized dentin matrix to overcome the mechanical instability of the collagen membrane. The dentin-derived-barrier acted as an osteo-inductive collagen membrane with mechanical and clot stabilities, and it replaced the osteo-genetic function of the periosteum. Further research involving large numbers of patients should be conducted to evaluate bone forming capacity in comparison with other collagen membranes.

Clindamycin-Based 3D-Printed and Electrospun Coatings for Treatment of Implant-Related Infections

This study presents the development and characterisation of two novel bioactive coatings deposited on TiAlV and AISI 316LVM substrates. The coatings were prepared using 3D printing and electrospinning. The 3D-printed coating consisted of the cellulose nanofibril suspension, alginate, and carboxymethylcellulose (CMC), while CMC and polyethylene oxide were used to prepare the electrospun coating. Both coatings were loaded with the antibiotic clindamycin (CLIN), which is a bacteriostatic lincosamide known for its activity against streptococci, staphylococci, pneumococci, Bacteroides species, and other anaerobes. Initial characterisation of the coatings was performed by attenuated total reflectance Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and atomic force microscopy. Furthermore, the contact angle measurements, swelling rate, and biodegradability of the coatings were investigated. The released concentration of CLIN in PBS (pH = 7.4 at 25 °C) was determined by UV-VIS spectrophotometry. The coatings’ biocompatibility was determined using an MTT (3(4,5 dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide) assay using an osteoblast cell culture (hFOB 1.19, ATCC CRL 11372).