Response Surface Method Analysis of Chemically Stabilized Fiber-Reinforced Soil

Process Optimisation of Ultrasound-Assisted Extraction of Oligosaccharides from Coconut Husk

A fractional factorial design was used to investigate the ultrasound-assisted extraction (UAE) of oligosaccharides from coconut husk, an agroindustry by-product. The effects of five key influencing parameters (X ₁, incubation temperature; X ₂, extraction duration; X ₃, ultrasonicator power; X ₄, NaOH concentration; X ₅, solid-to-liquid ratio) were studied. Total carbohydrate content (TC), total reducing sugar (TRS), and degree of polymerisation (DP) were the dependent variables. The optimal extraction condition was attained when oligosaccharides with a desired DP of 3.72 were extracted when the coconut husk in a liquid-to-solid ratio of 127 mL/g was treated with 1.05 percent (w/v) of NaOH solution at an incubation temperature of 30.4°C for 5 min using an ultrasonicator power of 248 W. The optimised parameters for oligosaccharide extraction from coconut husk reported in this study could be useful for the effective isolation of these compounds for prebiotic research.

Preparation and Optimization of Ibrutinib-Loaded Nanoliposomes Using Response Surface Methodology

The main aim of this study was to optimize the formulation and process variables for the preparation of ibrutinib nanoliposomes and to evaluate the stability of nanoliposomes. The influence of four formulations and process parameters, namely, the phosphatidylcholine-to-cholesterol ratio (A), conc. of ibrutinib (B), sonication time (C), and stirring time (D) on the drug encapsulation efficiency (Y₁) and particle size (Y₂) of ibrutinib nanoliposomes were investigated by using response surface methodology. Reverse-phase evaporation was used to prepare ibrutinib nanoliposomes. Twenty-nine trial experiments were performed as per the design and the response parameters were noted. Multiple linear regression analysis was used to assess each response parameter. The effect of each factor on the response parameters was depicted using perturbation, response surface, and contour plots. A numerical optimization technique was used to estimate the optimum process parameters to obtain the desired responses. Ibrutinib nanoliposomes prepared under optimal conditions were evaluated for stability at a different temperature, pH, and sonication time. It is evident from the results that the phosphatidylcholine-to-cholesterol ratio (A) was the major factor influencing the encapsulation efficiency. All the factors were found to have noteworthy influences on particle size. A statistical evaluation provided the information about the individual and interactive effects of independent factors on the response parameters in order to obtain optimum experimental conditions that lead to preparing nanoliposomes with improved characteristics. The optimum level of the independent variables was phosphatidylcholine:cholesterol (6.76:1), ibrutinib concentration (2 mg/mL), sonication time (15.13 min), and stirring time (45 min). At optimal conditions, Y₁ and Y₂ were found to be 90.76 ± 1.56% and 208.24 ± 3.16 nm, respectively. The ibrutinib nanoliposomes were found to be stable both in simulated gastric and intestinal fluids at 37 °C for 6 h. At elevated conditions of temperature and pH, the prepared nanoliposomes were found to be unstable. Sonication for shorter periods resulted in decreased particle size, whereas longer periods can be helpful for ultrasound-assisted drug delivery. The closeness between the obtained results and predicted results indicates the reliability of the optimization technique for the preparation of ibrutinib nanoliposomes.

Soil Injection Technology Using an Expandable Polyurethane Resin: A Review

The soil injection, using an expandable polyurethane resin, holds a unique potential for settlement compensation, lifting, and strengthening the foundations of existing buildings and structures. Although various research and case studies regarding this technology have been published, these studies emphasized the technology’s effectiveness in the rapid lifting process. Nevertheless, there is no complete understanding of the technology, yet, that gathers necessary data leading to a better recognition for this technology in the theoretical understanding and the practical applications. This article aims to provide a comprehensive understanding of this technology. The injection process, the resin’s mechanism, and actual propagation in the soil’s massive, the modified physic-mechanical properties of the soil, the expansion process, the consumption of the resin, and the durability are extensively reviewed in this article. Besides that, this article aims to demonstrate the advantages and limitations of this technology in practical applications. The review also explores the existing finite element models used to calculate the strength and stiffness parameters, evaluating the bearing capacity of the composite (soil-resin) and the settlement after the injection process.

Effect of Confining Conditions on the Hydraulic Conductivity Behavior of Fiber-Reinforced Lime Blended Semiarid Soil

The hydraulic properties of expansive soils are affected due to the formation of visible cracks in the dry state. Chemical stabilization coupled with fiber reinforcement is often considered an effective strategy to improve the geotechnical performance of such soils. In this study, hydraulic conductivity tests have been conducted on expansive clay using two different types of fibers (fiber cast (FC) and fiber mesh (FM)) exhibiting different surface morphological properties. The fiber parameters include their dosage (added at 0.2% to 0.6% by dry weight of soil) and length (6 and 12 mm). Commercially available lime is added to ensure proper bonding between clay particles and fiber materials, and its dosage was fixed at 6% (by dry weight of the soil). Saturated hydraulic conductivity tests were conducted relying on a flexible wall permeameter on lime-treated fiber-blended soil specimens cured for 7 and 28 days. The confining pressures were varied from 50 to 400 kPa, and the saturated hydraulic conductivity values (k_sat) were determined. For FC fibers, an increase in fiber dosage caused k_sat values to increase by 9.5% and 94.3% for the 6 and 12 mm lengths, respectively, at all confining pressures and curing periods. For FM fibers, k_sat values for samples mixed with 6 mm fiber increased by 12 and 99.2% for 6 and 12 mm lengths, respectively for all confining pressures at the end of the 28-day curing period. The results obtained from a flexible wall permeameter (FWP) were compared with those of a rigid wall permeameter (RWP) available in the literature, and the fundamental mechanism responsible for such variations is explained.