Thermally Treated Waste Silt as Filler in Geopolymer Cement

Thermally Treated Waste Silt as Geopolymer Grouting Material and Filler for Semiflexible Pavements

Considering the future shortage of natural aggregates, various researchers have promoted the recycling of by-products into various asphalt pavement types. This paper promoted a double-recycling technique, where thermally treated waste silt was used as a filler for the bituminous skeleton and grouting material of a geopolymer-based semiflexible pavement. Semiflexible pavements (SFP) inherit the flexibility of common asphalt pavements and simultaneously benefit from the rigidity of cement concrete pavements. For this purpose, waste silt obtained from a local asphalt plant was thermally treated at 750 °C and was used as the filler to produce the porous skeleton. Two different materials, including conventional cement-based and a geopolymer-based cement, were used as the grouting material. The geopolymer grout was produced by mixing metakaolin (MK), potassium-based liquid hardener and calcined silt as filler. The porous and grouted samples were characterized in terms of indirect tensile strength (ITS), the indirect tensile strength modulus (ITSM) and moisture sensitivity. The use of thermally treated waste silt as filler in porous asphalt demonstrated promising results and was comparable to the control samples produced with limestone as the filler. However, the control samples grouted with cement-based material outperformed the geopolymer grout in all aspects. Moreover, the addition of calcined silt improved the low-temperature fatigue performance of porous and grouted asphalt pavements.

Leaching of PAHs from rubber modified asphalt pavements

The present study aimed to, for the first time, quantify the total content of 16 priority EPA PAHs in end-of-life tyre derived crumb rubber granulates and various manufactured rubberised asphalt mix designs. After identifying the availability of 16 EPA PAHs, the leaching behaviour of rubberised asphalt specimens, were evaluated using the Dynamic Surface Leaching Test (DSLT) based on CEN/TS 16637-2:2014 standard. This was prior to modelling the release mechanisms of PAHs by utilizing a mathematical diffusion-controlled leaching model. According to the results, the total content of 16 EPA PAHs in crumb rubber granulates ranged between 0.061 and 8.322 μg/g, which were associated with acenaphthene and pyrene, respectively. The total content of PAHs in rubberised asphalt specimens varied between 0.019 and 4.992 μg/g depending on the volume of crumb rubber granulates in the asphalt concrete mix design, and type of binder. Results of the leaching experiments revealed that the highest leached PAHs were benzo[b]fluoranthene, benzo[k]fluoranthene and naphthalene with a 64-days cumulative release per specimen surface area > 1 μg/m². Acenaphthylene, fluoranthene, fluorene and indeno[1,2,3-c,d]pyrene were released in cumulative concentrations between 0.1 and 1 μg/m². The PAHs with a cumulative release potential below 0.1 μg/m² during DSLT were benzo[a]anthracene, benzo[a]pyrene, benzo[g,h,i]perylene and chrysene. The diffusion coefficients, which were calculated by mathematical modelling of DSLT data, revealed that the leaching process of 16 EPA PAHs from surface of rubberised asphalt concrete mix designs fitted all the criteria set by the NEN 7345 standard for diffusion-controlled leaching during all stages of leaching experiments.

Mixture Optimization of Concrete Paving Blocks Containing Waste Silt

Most of the waste materials recycled for the production of new construction materials are by-products of various manufacturing processes, such as the aggregate washing process. Recycling such materials is of paramount importance since it could reduce the adverse environmental impacts resulting from landfilling. Various studies have attempted to recycle different types of waste materials and by-products into concrete paving blocks. However, the availability of literature on concrete paving blocks containing waste silt is quite scarce. Thus, the current paper focuses on mix design optimization and production of concrete paving blocks containing high amounts of waste silt resulting from the aggregate production process. Using the mixture Design of Experiments (DOE), 12 sets of concrete paving blocks with different aggregate blends were produced to optimize the mix design. Once the final mix design was achieved, the physical and mechanical properties of the concrete paving blocks were investigated following the EN 1338 standard. Shape and dimension measurements and various tests, including water absorption, tensile splitting strength, abrasion resistance, and slip/skid resistance were conducted on the experimental concrete paving samples. Overall, the produced concrete paving blocks showed promising properties for future applications in pedestrian walking paths.

Thermal, X-ray Diffraction and Oedometric Analyses of Silt-Waste/NaOH-Activated Metakaolin Geopolymer Composite

The present research investigates the possibility to create a silt-waste reinforced composite through a NaOH-activated, metakaolin-based geopolymerization process. In this regard, we used thermal exo–endo analysis, X-ray diffraction (XRD), and oedometric mechanical tests to characterize the produced composites. In our experimental conditions, the tested material mixtures presented exothermic peaks with maximum temperatures of about 100 °C during the studied geopolymerization process. In general, the XRD analyses showed the formation of amorphous components and new mineral phases of hydrated sodalite, natrite, thermonatrite and trona. From oedometric tests, we observed a different behavior of vertical deformation related to pressure (at RT) for the various produced composites. The present work indicated that the proposed geopolymerization process to recycle silt-waste produced composite materials with various and extended mineralogy and chemical–physical properties, largely depending on both the precursors and the specific alkaline-activating solution. Thermal analysis, XRD, and oedometric mechanical tests proved to be fundamental to characterize and understand the behavior of the newly formed composite material.