Catalysts for the Conversion of CO2 to Low Molecular Weight Olefins-A Review

Nanomaterials as catalysts for CO2 transformation into value-added products: A review

Carbon dioxide (CO₂₎ is the most important greenhouse gas (GHG), accounting for 76% of all GHG emissions. The atmospheric CO₂ concentration has increased from 280 ppm in the pre-industrial era to about 418 ppm, and is projected to reach 570 ppm by the end of the 21^st century. In addition to reducing CO₂ emissions from anthropogenic activities, strategies to adequately address climate change must include CO₂ capture. To promote circular economy, captured CO₂ should be converted to value-added materials such as fuels and other chemical feedstock. Due to their tunable chemistry (which allows them to be selective) and high surface area (which allows them to be efficient), engineered nanomaterials are promising for CO₂ capturing and/or transformation. This work critically reviewed the application of nanomaterials for the transformation of CO₂ into various fuels, like formic acid, carbon monoxide, methanol, and ethanol. We discussed the literature on the use of metal-based nanomaterials, inorganic/organic nanocomposites, as well as other routes suitable for CO₂ conversion such as the electrochemical, non-thermal plasma, and hydrogenation routes. The characteristics, steps, mechanisms, and challenges associated with the different transformation technologies were also discussed. Finally, we presented a section on the outlook of the field, which includes recommendations for how to continue to advance the use of nanotechnology for conversion of CO₂ to fuels.

Hydrodesulfurization of Dibenzothiophene over Ni-Mo-W Sulfide Catalysts Supported on Sol-Gel Al2O3-CeO2

To achieve sulfur content in gas oil at a near-zero level, new catalysts with improved hydrogenation functions are needed. In this work, new Ni-Mo-Mo hydrodesulfurization (HDS) catalysts supported by Al₂O₃-CeO₂ materials were synthesized to evaluate their efficiency in the reaction of HDS with dibenzothiophene (DBT). Al₂O₃-CeO₂ supports different CeO₂ loadings (0, 5, 10 and 15 wt.%) and supported NiMoW catalysts were synthesized by sol-gel and impregnation methods, respectively. The physicochemical properties of the supports and catalysts were determined by a variety of techniques (chemical analysis, XRD, N₂ physisorption, DRS UV-Vis, XPS, and HRTEM). In the DBT HDS reaction carried out in a batch reactor at 320 °C and a H₂ pressure of 5.5 MPa, the sulfide catalysts showed a dramatic increase in activity with increasing CeO₂ content in the support. Nearly complete DBT conversion (97%) and enhanced hydrogenation function (HYD) were achieved on the catalyst with the highest CeO₂ loading. The improved DBT conversion and selectivity towards the hydrogenation products (HYD/DDS ratio = 1.6) of this catalyst were attributed to the combination of the following causes: (i) the positive effect of CeO₂ in forcing the formation of the onion-shaped Mo(W)S₂ layers with a large number of active phases, (ii) the inhibition of the formation of the undesired NiAlO₄ spinel phase, (iii) the appropriate textural properties, (iv) the additional ability for heterolytic dissociation of H₂ on the CeO₂ surfaces, and (v) the increase in Brønsted acidity.

CO2 Hydrogenation Catalyzed by Graphene-Based Materials

In the context of an increased interest in the abatement of CO₂ emissions generated by industrial activities, CO₂ hydrogenation processes show an important potential to be used for the production of valuable compounds (methane, methanol, formic acid, light olefins, aromatics, syngas and/or synthetic fuels), with important benefits for the decarbonization of the energy sector. However, in order to increase the efficiency of the CO₂ hydrogenation processes, the selection of active and selective catalysts is of utmost importance. In this context, the interest in graphene-based materials as catalysts for CO₂ hydrogenation has significantly increased in the last years. The aim of the present paper is to review and discuss the results published until now on graphene-based materials (graphene oxide, reduced graphene oxide, or N-dopped graphenes) used as metal-free catalysts or as catalytic support for the thermocatalytic hydrogenation of CO₂. The reactions discussed in this paper are CO₂ methanation, CO₂ hydrogenation to methanol, CO₂ transformation into formic acid, CO₂ hydrogenation to high hydrocarbons, and syngas production from CO₂. The discussions will focus on the effect of the support on the catalytic process, the involvement of the graphene-based support in the reaction mechanism, or the explanation of the graphene intervention in the hydrogenation process. Most of the papers emphasized the graphene’s role in dispersing and stabilizing the metal and/or oxide nanoparticles or in preventing the metal oxidation, but further investigations are needed to elucidate the actual role of graphenes and to propose reaction mechanisms.