1
|
Zandifar A, Esmaeilzadeh F, Rodríguez-Mirasol J. Hydrogen-rich gas production via supercritical water gasification (SCWG) of oily sludge over waste tire-derived activated carbon impregnated with Ni: Characterization and optimization of activated carbon production. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 342:123078. [PMID: 38052340 DOI: 10.1016/j.envpol.2023.123078] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Revised: 11/15/2023] [Accepted: 11/29/2023] [Indexed: 12/07/2023]
Abstract
In this study, the production of activated carbon (AC) through the chemical activation of waste tire (WT) using H3PO4 and KOH for H2 production by SCWG of oily sludge (OS) donated by Persian Gulf Star Oil Company was investigated. H3PO4 was the best activating agent based on some pretests results, and then the synthesis of AC was optimized using Response Surface Methodology. Based on BET surface area of synthesized ACs, thirty combinations of the four variables namely; activation temperature (350-550 °C); activation time (1-4 h); H3PO4 to WT ratio (1-3 w.w-1); and H3PO4 concentration (20-40 wt%) were optimized. CHNS, TGA, FE-SEM, and EDS-mapping analyses were used to characterize the AC and catalyst synthesized in optimum condition (activation temperature: 450 °C; activation time: 2.5 h; H3PO4 to WT ratio: 2 w.w-1; and H3PO4 concentration: 40 wt%), which presented a surface area of 170 m2 g-1. Finally, Ni was impregnated on the optimized AC with different loadings (5-15 wt%) to evaluate its performance in H2 production by SCWG of OS. Although H2 yield in catalytic experiments was higher than that observed in non-catalytic experiment, results showed that the maximum H2 selectivity was 66% in SCWG of OS using AC impregnated with 10 wt% Ni.
Collapse
Affiliation(s)
- Ali Zandifar
- Chemical Engineering Department, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, Iran.
| | - Feridun Esmaeilzadeh
- Chemical Engineering Department, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, Iran; Enhanced Oil and Gas Recovery Institute, Advanced Research Group for Gas Condensate Recovery, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, Iran.
| | - José Rodríguez-Mirasol
- Chemical Engineering Department, University of Málaga, Campus de Teatinos s/n, 29010, Málaga, Spain
| |
Collapse
|
2
|
Thakur A, Kumar A. Unraveling the multifaceted mechanisms and untapped potential of activated carbon in remediation of emerging pollutants: A comprehensive review and critical appraisal of advanced techniques. CHEMOSPHERE 2024; 346:140608. [PMID: 37925026 DOI: 10.1016/j.chemosphere.2023.140608] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/07/2023] [Revised: 10/13/2023] [Accepted: 11/01/2023] [Indexed: 11/06/2023]
Abstract
The rapid global expansion of industrialization has resulted in the discharge of a diverse range of hazardous contaminants into the ecosystem, leading to extensive environmental contamination and posing a pressing ecological concern. In this context, activated carbon (AC) has emerged as a highly promising adsorbent, offering significant advantages over conventional forms. For instance, AC has demonstrated remarkable adsorption capabilities, as evidenced by the successful removal of atrazine and ibuprofen using KOH and KOH-CO2-activated char, achieving impressive adsorption rates of 90% and 95%, respectively, at an initial dosage of 10 mg L-1. Moreover, AC can effectively adsorb aromatic compounds through π-π stacking interactions. The aromatic rings in organic molecules can align and interact with the carbon atoms in AC's structure, leading to effective adsorption. In this review, by employing a systematic analysis of recent research findings (majorly from 2015 to 2023), an in-depth exploration of AC's evolution and its wide-ranging applications in adsorbing and remediating emerging pollutants, including dyes, organic contaminants, and hazardous gases and mitigating the adverse impacts of such emerging pollutants on ecosystems have been discussed. It serves as a valuable resource for researchers, professionals, and policymakers involved in environmental remediation and pollution control, facilitating the development of sustainable and effective strategies for mitigating the global impact of emerging pollutants.
Collapse
Affiliation(s)
- Abhinay Thakur
- Department of Chemistry, School of Chemical Engineering and Physical Sciences, Lovely Professional University, Phagwara, Punjab, 144411, India
| | - Ashish Kumar
- Nalanda College of Engineering, Bihar Engineering University, Science, Technology and Technical Education Department , Government of Bihar, 803108, India.
| |
Collapse
|
3
|
de Oliveira C, Renda CG, Moreira AJ, Pereira OAP, Pereira EC, Freschi GPG, Bertholdo R. Evaluation of a graphitic porous carbon modified with iron oxides for atrazine environmental remediation in water by adsorption. ENVIRONMENTAL RESEARCH 2023; 219:115054. [PMID: 36521534 DOI: 10.1016/j.envres.2022.115054] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/03/2022] [Revised: 12/01/2022] [Accepted: 12/10/2022] [Indexed: 06/17/2023]
Abstract
In the last decades, the growth of world agricultural activity has significantly contributed to the increased presence of emerging pollutants such as atrazine (ATZ) in aquatic ecosystems. Due to its high stability to the natural or artificial degradation processes, the ATZ environmental remediation by adsorption has been investigated. In this study, a graphitic-porous-carbon- (GPC) based material with magnetic domains was applied to remove ATZ from aqueous solution. ATZ high adsorption efficiency in a reduced time was achieved in the presence of the GPC adsorbent, leading to a detailed investigation of the mechanisms involved in the adsorption processes. Pseudo-first-order (PFO), pseudo-second-order (PSO), Ritchie, Elovich, and Weber-Morris models were applied to calculate the kinetic process efficiency. Likewise, adsorption isotherms based on Langmuir, Freundlich, Temkin, and Redlich-Peterson models were applied for a detailed understanding of the adsorption mechanisms. GPC was successfully applied for ATZ remediation in natural waters, confirming its high potential for treating natural waters contaminated by ATZ using adsorption process. The material can also be recovered and reused for up to 4 application cycles due to its magnetic properties, showing that in addition to ATZ adsorption efficiency, its sustainable use can be achieved.
Collapse
Affiliation(s)
- Cristiane de Oliveira
- Federal University of Alfenas, Poços de Caldas - MG Campus, Rod. José Aurelio Vilela, BR 267, Km 533, 11999, University City, Zip Code, 37715-400, Poços de Caldas, MG, Brazil
| | - Carmem G Renda
- Department of Materials Engineering, Federal University of São Carlos, Rod. Washington Luiz, Km 235, Zip Code, 13565-905, São Carlos, SP, Brazil
| | - Ailton J Moreira
- Department of Chemistry, Federal University of São Carlos, Rod. Washington Luiz, Km 235, Zip Code, 13565-905, São Carlos, SP, Brazil
| | - Otávio A P Pereira
- Federal University of Alfenas, Poços de Caldas - MG Campus, Rod. José Aurelio Vilela, BR 267, Km 533, 11999, University City, Zip Code, 37715-400, Poços de Caldas, MG, Brazil
| | - Ernesto C Pereira
- Department of Chemistry, Federal University of São Carlos, Rod. Washington Luiz, Km 235, Zip Code, 13565-905, São Carlos, SP, Brazil
| | - Gian P G Freschi
- Federal University of Alfenas, Poços de Caldas - MG Campus, Rod. José Aurelio Vilela, BR 267, Km 533, 11999, University City, Zip Code, 37715-400, Poços de Caldas, MG, Brazil
| | - Roberto Bertholdo
- Federal University of Alfenas, Poços de Caldas - MG Campus, Rod. José Aurelio Vilela, BR 267, Km 533, 11999, University City, Zip Code, 37715-400, Poços de Caldas, MG, Brazil.
| |
Collapse
|
4
|
Jeong CH, Lee SH, Kim HY. Analysis of Food Storage Stability of Biodegradable Containers Made of Pork Skin Gelatin Polymer with Walnut Shell Powder. Polymers (Basel) 2022; 14:polym14101940. [PMID: 35631823 PMCID: PMC9144320 DOI: 10.3390/polym14101940] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/11/2022] [Revised: 05/03/2022] [Accepted: 05/06/2022] [Indexed: 11/29/2022] Open
Abstract
This study analyzes the food storage stability of biodegradable containers made of pork skin gelatin polymer. Packaging materials were prepared with different proportions of walnut shell powder, including 10% (W10), 20% (W20), and polyethylene packaging (PE) as a control. To analyze storage stability, parameters such as pH, thiobarbituric acid reactive substance (TBARS), volatile basic nitrogen (VBN), microbial population, and color were measured. The pH, yeast and mold, redness, and yellowness of W10 and W20 had no significant difference compared to those of PE in all storage periods (p > 0.05). The TBARS of W20 was shown to slowly increase compared to W10. The VBN concentration of W10 and W20 were significantly higher than that of PE in the first and second weeks, but there was no significant difference in the third week (p < 0.05). The total bacterial counts of W10 and W20 were significantly higher than that of PE during the first week (p < 0.05), but there was no significant difference thereafter (p > 0.05). The lightness values of W10 and W20 were significantly lower than that of PE in the second and third weeks (p < 0.05). These results indicated that biodegradable containers containing up to 20% walnut shell powder can substitute plastic packaging materials.
Collapse
Affiliation(s)
| | | | - Hack-Youn Kim
- Correspondence: ; Tel.: +82-41-330-1241; Fax: +82-41-330-1249
| |
Collapse
|
5
|
Production and Upgrading of Recovered Carbon Black from the Pyrolysis of End-of-Life Tires. MATERIALS 2022; 15:ma15062030. [PMID: 35329479 PMCID: PMC8953607 DOI: 10.3390/ma15062030] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/31/2021] [Revised: 03/05/2022] [Accepted: 03/07/2022] [Indexed: 01/01/2023]
Abstract
Increasing awareness regarding fossil fuel dependence, waste valorization, and greenhouse gas emissions have prompted the emergence of new solutions for numerous markets over the last decades. The tire industry is no exception to this, with a global production of more than 1.5 billion tires per year raising environmental concerns about their end-of-life recycling or disposal. Pyrolysis enables the recovery of both energy and material from end-of-life tires, yielding valuable gas, liquid, and solid fractions. The latter, known as recovered carbon black (rCB), has been extensively researched in the last few years to ensure its quality for market applications. These studies have shown that rCB quality depends on the feedstock composition and pyrolysis conditions such as type of reactor, temperature range, heating rate, and residence time. Recent developments of activation and demineralization techniques target the production of rCB with specific chemical, physical, and morphological properties for singular applications. The automotive industry, which is the highest consumer of carbon black, has set specific targets to incorporate recycled materials (such as rCB) following the principles of sustainability and a circular economy. This review summarizes the pyrolysis of end-of-life tires for the production of syngas, oil, and rCB, focusing on the process conditions and product yield and composition. A further analysis of the characteristics of the solid material is performed, including their influence on the rCB application as a substitute of commercial CB in the tire industry. Purification and modification post-treatment processes for rCB upgrading are also inspected.
Collapse
|