Thermal Kinetics of Monocationic and Dicationic Pyrrolidinium-Based Ionic Liquids

A comparative study on the design and application of new nano benzimidazolium gemini ionic liquids for curing interfacial properties of the crude oil-water system

Gemini surface active ionic liquids (GSAILs) are considered a new prosperous class of ionic liquids and recognized as high performance materials. The present study explores the capabilities of the newly synthesized GSAILs, constructed from two benzimidazole rings attached via a four or a six carbon spacer, namely [C₄benzim-C_n-benzimC₄][Br₂], n = 4 and 6. The products were characterized with FT-IR, NMR, XRD, TGA, DTG and SEM methods and were used in curing interfacial properties of the crude oil-water system. The interfacial tension (IFT) was reduced to about 64 and 71% under critical micelle concentrations (CMCs) of 0.028 and 0.025 mol dm^-3 at 298.2 K for n = 4 and 6 GSAILs, respectively. Temperature significantly assisted this effect. Both the GSAILs could transfer the wettability of the solid surface from oil-wet to water-wet. Further, stable oil/water emulsions were produced, having emulsion indices of 74.2 and 77.3% for n = 4 and 6 GSAILs, respectively. Compared to homologous imidazolium GSAILs, the benzimidazolium products revealed better performance in the sense of exhibiting desired effects on the investigated interfacial properties. These can be attributed to the stronger hydrophobicity of the benzimidazolium rings as well as better spreading of the molecular charges. The Frumkin isotherm could exactly reproduce the IFT data, leading to precise determination of the important adsorption and thermodynamic parameters.

Ideal Adsorbed Solution Theory (IAST) of Carbon Dioxide and Methane Adsorption Using Magnesium Gallate Metal-Organic Framework (Mg-gallate)

Ideal Adsorbed Solution Theory (IAST) is a predictive model that does not require any mixture data. In gas purification and separation processes, IAST is used to predict multicomponent adsorption equilibrium and selectivity based solely on experimental single-component adsorption isotherms. In this work, the mixed gas adsorption isotherms were predicted using IAST calculations with the Python package (pyIAST). The experimental CO2 and CH4 single-component adsorption isotherms of Mg-gallate were first fitted to isotherm models in which the experimental data best fit the Langmuir model. The presence of CH4 in the gas mixture contributed to a lower predicted amount of adsorbed CO2 due to the competitive adsorption among the different components. Nevertheless, CO2 adsorption was more favorable and resulted in a higher predicted adsorbed amount than CH4. Mg-gallate showed a stronger affinity for CO2 molecules and hence contributed to a higher CO2 adsorption capacity even with the coexistence of a CO2/CH4 mixture. Very high IAST selectivity values for CO2/CH4 were obtained which increased as the gas phase mole fraction of CO2 approached unity. Therefore, IAST calculations suggest that Mg-gallate can act as a potential adsorbent for the separation of CO2/CH4 mixed gas.

Thermal Hazard Evaluation of Tert-Butyl Peroxy-3,5,5-trimethylhexanoate (TBPTMH) Mixed with Acid-Alkali

Tert-butyl peroxy-3,5,5-trimethylhexanoate (TBPTMH), a liquid ester organic peroxide, is commonly used as an initiator for polymerization reactions. During the production process, TBPTMH may be exposed to acids and alkali, which may have different effects on its thermal hazard, so it is necessary to carry out a study on the thermal hazard of TBPTMH mixed with acids and alkali. In this paper, the effects of H₂SO₄ and NaOH on the thermal decomposition of TBPTMH were investigated by differential scanning calorimetry (DSC) and adiabatic calorimetry (Phi-TEC II). The “kinetic triple factors” were calculated by thermodynamic analysis. The results show that the three E_a are 132.49, 116.36, and 118.24 kJ/mol, respectively; thus, the addition of H₂SO₄ and NaOH increased the thermal hazard of TBPTMH. In addition, the characteristic parameters (time to maximum rate under adiabatic conditions, self-accelerated decomposition temperature) of its thermal decomposition were determined, and the control temperature (45, 40, and 40 °C) of TBPTMH under the action of acid-alkali were further received. This work is expected to provide some guidance for the safe storage, handling, production, and transportation of TBPTMH in the process industry.