Flexural Strength Prediction of Steel Fiber-Reinforced Concrete Using Artificial Intelligence

Analysis and prediction of compressive and split-tensile strength of secondary steel fiber reinforced concrete based on RBF fuzzy neural network model

Accurate analysis of the strength of steel-fiber-reinforced concrete (SFRC) is important for ensuring construction quality and safety. Cube compression and splitting tensile tests of steel fiber with different varieties, lengths, and dosages were performed, and the effects of different varieties, lengths, and dosages on the compressive and splitting properties of secondary concrete were obtained. It was determined that the compression and splitting strengths of concrete could be effectively improved by the addition of end-hooked and milled steel fibers. The compressive and splitting strengths of concrete can be enhanced by increasing the fiber length and content. However, concrete also exhibits obvious uncertainty owing to the comprehensive influence of steel fiber variety, fiber length, and fiber content. In order to solve this engineering uncertainty, the traditional RBF neural network is improved by using central value and weight learning strategy especially. On this basis, the RBF fuzzy neural network prediction model of the strength of secondary steel fiber-reinforced concrete was innovatively established with the type, length and content of steel fiber as input information and the compressive strength and splitting tensile strength as output information. In order to further verify the engineering reliability of the prediction model, the compressive strength and splitting tensile strength of steel fiber reinforced concrete with rock anchor beams are predicted by the prediction model. The results show that the convergence rate of the prediction model is increased by 15%, and the error between the predicted value and the measured value is less than 10%, which is more efficient and accurate than the traditional one. Additionally, the improved model algorithm is efficient and reasonable, providing technical support for the safe construction of large-volume steel fiber concrete projects, such as rock anchor beams. The fuzzy random method can also be applied to similar engineering fields.

Evaluating the effectiveness of waste glass powder for the compressive strength improvement of cement mortar using experimental and machine learning methods

This study utilized both experimental testing and machine learning (ML) strategies to assess the effectiveness of waste glass powder (WGP) on the compressive strength (CS) of cement mortar. The cement-to-sand ratio was kept 1:1 with a water-to-cement ratio of 0.25. The superplasticizer content was 4% by cement mass, and the proportion of silica fume was 15%, 20%, and 25% by cement mass in three different mixes. WGP was added to cement mortar at replacement contents from 0 to 15% for sand and cement with a 2.5% increment. Initially, using an experimental method, the CS of WGP-based cement mortar at the age of 28 days was calculated. The obtained data were then used to forecast the CS using ML techniques. For CS estimation, two ML approaches, namely decision tree and AdaBoost, were applied. The ML model's performance was assessed by calculating the coefficient of determination (R²), performing statistical tests and k-fold validation, and assessing the variance between the experimental and model outcomes. The use of WGP enhanced the CS of cement mortar, as noted from the experimental results. Maximum CS was attained by substituting 10% WGP for cement and 15% WGP for sand. The findings of the modeling techniques demonstrated that the decision tree had a reasonable level of accuracy, while the AdaBoost predicted the CS of WGP-based cement mortar with a higher level of accuracy. Utilizing ML approaches will benefit the construction industry by providing efficient and economic approaches for assessing the properties of materials.

Advanced machine learning algorithms to evaluate the effects of the raw ingredients on flowability and compressive strength of ultra-high-performance concrete

The estimation of concrete characteristics through artificial intelligence techniques is come out to be an effective way in the construction sector in terms of time and cost conservation. The manufacturing of Ultra-High-Performance Concrete (UHPC) is based on combining numerous ingredients, resulting in a very complex composite in fresh and hardened form. The more ingredients, along with more possible combinations, properties and relative mix proportioning, results in difficult prediction of UHPC behavior. The main aim of this research is the development of Machine Learning (ML) models to predict UHPC flowability and compressive strength. Accordingly, sophisticated and effective artificial intelligence approaches are employed in the current study. For this purpose, an individual ML model named Decision Tree (DT) and ensembled ML algorithms called Bootstrap Aggregating (BA) and Gradient Boosting (GB) are applied. Statistical analyses like; Determination Coefficient (R2), Root Mean Square Error (RMSE), and Mean Absolute Error (MAE) are also employed to evaluate algorithms' performance. It is concluded that the GB approach appropriately forecasts the UHPC flowability and compressive strength. The higher R2 value, i.e., 0.94 and 0.95 for compressive and flowability, respectively, of the DT technique and lesser error values, have higher precision than other considered algorithms with lower R2 values. SHAP analysis reveals that limestone powder content and curing time have the highest SHAP values for UHPC flowability and compressive strength, respectively. The outcomes of this research study would benefit the scholars of the construction industry to quickly and effectively determine the flowability and compressive strength of UHPC.

Prediction of the Mechanical Properties of Basalt Fiber Reinforced High-Performance Concrete Using Machine Learning Techniques

In this research, we present an efficient implementation of machine learning (ML) models that forecast the mechanical properties of basalt fiber-reinforced high-performance concrete (BFHPC). The objective of the present study was to predict compressive, flexural, and tensile strengths of BFHPC through ML techniques and propose some correlations between these properties. Moreover, the modulus of elasticity (ME) values and compressive stress-strain curves were simulated using ML techniques. In this regard, three predictive algorithms, including linear regression (LR), support vector regression (SVR), and polynomial regression (PR), were considered. LR, SVR, and PR were utilized to forecast the compressive, flexural, and tensile strengths of BFHPC, and the PR technique was employed to simulate the compressive stress-strain curves. The performance of the models was also determined by the coefficient of determination (R²), mean absolute errors (MAE), and root mean square errors (RMSE). According to the obtained values of R², MAE, and RMSE, the performance of PR was better than other types of algorithms in estimating the compressive, tensile, and flexural strengths. For example, R² values were 0.99, 0.94, and 0.98 in predicting the compressive, flexural, and tensile strengths using PR, respectively. This shows the higher accuracy and reliability of the PR technique compared with other predictive algorithms. Finally, we concluded that ML techniques can be appropriately applied to assess the mechanical characteristics of BFHPC.

Data-Driven Techniques for Evaluating the Mechanical Strength and Raw Material Effects of Steel Fiber-Reinforced Concrete

Estimating concrete properties using soft computing techniques has been shown to be a time and cost-efficient method in the construction industry. Thus, for the prediction of steel fiber-reinforced concrete (SFRC) strength under compressive and flexural loads, the current research employed advanced and effective soft computing techniques. In the current study, a single machine learning method known as multiple-layer perceptron neural network (MLPNN) and ensembled machine learning models known as MLPNN-adaptive boosting and MLPNN-bagging are used for this purpose. Water; cement; fine aggregate (FA); coarse aggregate (CA); super-plasticizer (SP); silica fume; and steel fiber volume percent (Vf SF), length (mm), and diameter were the factors considered (mm). This study also employed statistical analysis such as determination coefficient (R²), root mean square error (RMSE), and mean absolute error (MAE) to assess the performance of the algorithms. It was determined that the MLPNN-AdaBoost method is suitable for forecasting SFRC compressive and flexural strengths. The MLPNN technique's higher R², i.e., 0.94 and 0.95 for flexural and compressive strength, respectively, and lower error values result in more precision than other methods with lower R² values. SHAP analysis demonstrated that the volume of cement and steel fibers have the greatest feature values for SFRC's compressive and flexural strengths, respectively.