Composition, Technological, and Microstructural Aspects of Concrete Modified with Finely Ground Mussel Shell Powder

Effect of biological shells aggregate on the mechanical properties and sustainability of concrete

The recycling bio-waste shells problem has grown more and more serious in recent years and many efforts have been made to solve this problem. One possible solution is to put these bio-shells into concrete and recycle them as building materials using the aggregate matrix concrete approach. To verify the engineering feasibility, the mechanical properties of bio-shells aggregated concrete were invested via gradient substitution rates at 10%, 30%, and 50% with a total of 78 groups of specimens in this paper. Our results show that the mechanical properties of the concrete were enhanced in maximum flexural strength and maximum compressive. Economic performance was also analyzed and found that the costs of frame-shear structure, frame structure, and tube-in-tube structure were reduced by 10.2%, 10%, and 10.3%. The carbon environmental assessment also shows superiority in the carbon reduction of a single specimen with various rates of the shell. In summary, compared with ordinary concrete materials, it is very possible to use waste bio-shells as a substitute for aggregates to develop the sustainable recycling development of concrete materials.

Eco-Friendly Sustainable Concrete and Mortar Using Coal Dust Waste

Finding the solution to the problem of the accumulating waste from the mining and processing industries, as well as reducing their carbon footprint, is among the most important tasks today. Within the construction industry, in the field of the production of building materials such as concrete, these problems may be solved through the use of waste and by saving the binder component. The purpose of this study is to substantiate the feasibility of using waste coal dust (CD) in concrete and cement-sand mortars as a partial replacement for cement. Test samples were made by partially replacing cement with CD in an amount from 0% to 10% in increments of 2% by weight. The following main characteristics were studied: mobility and density of mixtures, as well as density, compressive strength, bending strength and water absorption of concrete and mortars. X-ray diffraction and microscopic analysis methods were used in this work. The introduction of CD to replace part of the cement, up to 10%, did not have a significant effect on the density of concrete and mortar mixtures but reduced their workability. The best values of physical and mechanical characteristics were recorded for concrete and mortar with 4% CD. The increases in the compressive strength of concrete and mortars were 6.6% and 5.7%, and in flexural strength 6.1% and 5.6%, respectively. Water absorption decreased by 9.7% for concrete and by 9.3% for mortar.

Effect of Walnut-Shell Additive on the Structure and Characteristics of Concrete

The partial replacement of the mineral components of concrete with natural renewable analogues in full possession of the performance characteristics of the final material, allows not only the concrete-production process to be made more environmentally friendly and inexpensive, but also to solve an important task for the agricultural industry, which is that associated with waste disposal. The scientific novelty of the work is in the obtaining of new concrete compositions by the partial replacement of coarse aggregate with a natural analogue in the form of a walnut shell, which has the maximum ratio of the strength of the composite to its density, as well as in identifying new dependencies of strength and density and their ratio on the amount of replacement of mineral coarse-aggregate walnut shell. The main goal of this article was to analyze the effect of composition factors on characteristics of concrete with partial replacement of large aggregates with walnut shells and to search for the optimal compound that would make it possible to obtain concrete with a minimum decrease in strength characteristics with a maximum decrease in concrete density. Cubes and prism laboratory samples were made from concrete of normal density with the replacement of coarse aggregate by 5, 10, 15, 20, 25 and 30%, by volume. The main mechanical properties, such as density, strength (compressive, tensile, tensile strength in bending) of the concrete samples were studied. The investigation used standard methods and scanning electron microscopy. An increase into strength characteristics up to 3.5%, as well as the maximum ratio of strength to density of concrete, was observed at a walnut-shell dosage of 5%. Effective partial replacement of coarse aggregate with walnut shells leads to a reduction in the consumption of crushed stone by up to 10% and a decrease in the mass of concrete by up to 6%.