Recent Advances in Magnetic Polymer Composites for BioMEMS: A Review

The Effect of Particle-Matrix Interface on the Local Mechanical Properties of Filled Polymer Composites: Simulations and Theoretical Analysis

A finite element model of the local mechanical response of a filled polymer composite to uniaxial compression is presented. The interfacial layer between filler particles and polymer matrix is explicitly modeled as a third phase of the composite. Unit cells containing one or several anisometric filler particles surrounded by interface shells are considered. The dependence of the mechanical response of the cells to external deformation on the interface thickness and stiffness is studied. The use of the particle-matrix interface as a damping tool in mesoscopic polymer-composite problems with large deformations is discussed. The influence of the interface on the anisotropy of the composite response is considered.

Control of Dielectric, Mechanical, and Thermal Properties of a Polymer Composite Based on ABS Using CoB Nanoparticles

This article is devoted to the development of a new method for the synthesis of magnetic cobalt boride nanoparticles using a low-energy approach. The obtained nanoparticles were used to create composite materials based on industrial thermoplastic ABS. The effect of different concentrations of nanoparticles on the physical, mechanical, magnetic, and dielectric properties of composite materials was studied. It was proven that by varying the concentration of nanoparticles in the ABS composite, it is possible to control the glass transition temperature from 107.5 to 112 °C. The resulting composites demonstrated superparamagnetic behavior, which changed linearly. The permittivity of the composite remained close to that of pure ABS, but a shift in the maximum permittivity to the low-frequency region was observed with an increase in the content of nanoparticles. Thus, a method for controlling the mechanical, magnetic, and dielectric properties of a composite material has been developed, which makes it possible to use routine ABS in a wider range of applications, including electrical devices.

Synthesis of copper hexaferrite magnetic nanoparticles based on carboxymethyl cellulose modified with polyacrylic acid (CMC/PAA/CuFe12O19) for loading and release of Levothyroxine

Hypothyroidism is a disease that is treated using levothyroxine sodium orally, and its oral use causes some problems in its absorption. A potential alternative to improve its administration is the use of drug delivery systems. This research aimed to prepare CMC/PAA/CuFe12O19 magnetic nano polymer and investigate its performance in the loading and release of Levothyroxine. The CuFe12O19 nanoparticles were synthesized by the co-precipitation method and then CMC/PAA/CuFe12O19 nanopolymer was fabricated to enhance properties. The structure, morphology, magnetic properties, and surface area of CMC/PAA/CuFe12O19 were characterized using different techniques such as XRD, FESEM, VSM, and BET. Levothyroxine was used as a model drug and loading and releasing of Levothyroxine onto CMC/PAA/CuFe12O19 nanopolymer were investigated at pH = 1.2 and pH 7.4. The release of DOX from the CMC/PAA/CuFe12O19 showed a pH-sensitive behavior and released 75 % of Levothyroxine during 3 days at pH = 7.4. The release kinetic analysis, encompassing of Zero order, the First order, the Higuchi, and the Korsmeyer-Peppas models, revealed significant fitting with the First order model at both pH 1.2 (R2 = 0.996) and pH 7.4 (R2 = 0.991) media. Therefore, CMC/PAA/CuFe12O19 nanopolymer could be used as a potential carrier for Levothyroxine delivery.

Tailoring the Wettability of Bacterial Cellulose Magnetobots via the Assembly of In Situ Synthesized and Surfactant-Coated Magnetic Nanoparticles

This study showcases the possibility of tailoring the wettability of magnetic bacterial cellulose (m-BC) composites by the combined effect of in situ synthesized magnetic nanoparticles (MNPs) distribution and simultaneous oleic acid (OA) coating within the BC matrix. This combined effect of MNPs and OA resulted in m-BC composites exhibiting solvent-dependent and time-dependent surface-wetting behavior, which was not observed in either individual cases of BC that have been modified with OA or BC that has MNPs adsorbed on its fibers. This tailored wettability in m-BCs was achieved via varying the concentrations of iron precursors, which governed the arrangement and morphology of MNPs (uniformly or clustered) on the BC membrane, although the same fraction of MNPs was observed in both the m-BCs. Finally, we have achieved delayed water absorption in m-BC_x (synthesized in a comparatively lower precursor concentration) and no absorption of water in m-BC_4x (synthesized in a 4-times-higher precursor concentration). The m-BC_4x composite maintained its hydrophobic characteristics in diverse environments, ranging from highly acidic conditions (pH 1.2) to physiological environments at pH 4, 5.5, and 7.4. The MNP agglomerates on the BC nanofibers in the m-BC_4x composite were found to be instrumental in attaining a stable cyclic absorption performance with structural integrity. Additionally, the magnetic-inducing heat generation efficiency of the m-BCs can be extended for evaporating low-boiling-point solvents. The present study expands the frontiers of BC-based magnetic composites by emphasizing the assembly of surfactant-coated magnetic nanostructures in their responsiveness to polar/nonpolar liquids with stable performance even in complex scenarios.

In-Situ Coating of Iron with a Conducting Polymer, Polypyrrole, as a Promise for Corrosion Protection

Iron microparticles were coated with polypyrrole in situ during the chemical oxidation of pyrrole with ammonium peroxydisulfate in aqueous medium. A series of hybrid organic/inorganic core-shell materials were prepared with 30-76 wt% iron content. Polypyrrole coating was revealed by scanning electron microscopy, and its molecular structure and completeness were proved by FTIR and Raman spectroscopies. The composites of polypyrrole/carbonyl iron were obtained as powders and characterized with respect to their electrical properties. Their resistivity was monitored by the four-point van der Pauw method under 0.01-10 MPa pressure. In an apparent paradox, the resistivity of composites increased from the units Ω cm for neat polypyrrole to thousands Ω cm for the highest iron content despite the high conductivity of iron. This means that composite conductivity is controlled by the electrical properties of the polypyrrole matrix. The change of sample size during the compression was also recorded and provides a parameter reflecting the mechanical properties of composites. In addition to conductivity, the composites displayed magnetic properties afforded by the presence of iron. The study also illustrates the feasibility of the polypyrrole coating on macroscopic objects, demonstrated by an iron nail, and offers potential application in the corrosion protection of iron. The differences in the morphology of micro- and macroscopic polypyrrole objects are described.

New 3D Vortex Microfluidic System Tested for Magnetic Core-Shell Fe3O4-SA Nanoparticle Synthesis

This study's main objective was to fabricate an innovative three-dimensional microfluidic platform suitable for well-controlled chemical syntheses required for producing fine-tuned nanostructured materials. This work proposes using vortex mixing principles confined within a 3D multilayered microreactor to synthesize magnetic core-shell nanoparticles with tailored dimensions and polydispersity. The newly designed microfluidic platform allowed the simultaneous obtainment of Fe3O4 cores and their functionalization with a salicylic acid shell in a short reaction time and under a high flow rate. Synthesis optimization was also performed, employing the variation in the reagents ratio to highlight the concentration domains in which magnetite is mainly produced, the formation of nanoparticles with different diameters and low polydispersity, and the stability of colloidal dispersions in water. The obtained materials were further characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM), with the experimental results confirming the production of salicylic acid-functionalized iron oxide (Fe3O4-SA) nanoparticles adapted for different further applications.

Effects of Filler Anisometry on the Mechanical Response of a Magnetoactive Elastomer Cell: A Single-Inclusion Modeling Approach

A finite-element model of the mechanical response of a magnetoactive elastomer (MAE) volume element is presented. Unit cells containing a single ferromagnetic inclusion with geometric and magnetic anisotropy are considered. The equilibrium state of the cell is calculated using the finite-element method and cell energy minimization. The response of the cell to three different excitation modes is studied: inclusion rotation, inclusion translation, and uniaxial cell stress. The influence of the magnetic properties of the filler particles on the equilibrium state of the MAE cell is considered. The dependence of the mechanical response of the cell on the filler concentration and inclusion anisometry is calculated and analyzed. Optimal filler shapes for maximizing the magnetic response of the MAE are discussed.

Programming and Reprogramming the Viscoelasticity and Magnetic Response of Magnetoactive Thermoplastic Elastomers

We present a novel type of magnetorheological material that allows one to restructure the magnetic particles inside the finished composite, tuning in situ the viscoelasticity and magnetic response of the material in a wide range using temperature and an applied magnetic field. The polymer medium is an A-g-B bottlebrush graft copolymer with side chains of two types: polydimethylsiloxane and polystyrene. At room temperature, the brush-like architecture provides the tissue mimetic softness and strain stiffening of the elastomeric matrix, which is formed through the aggregation of polystyrene side chains into aggregates that play the role of physical cross-links. The aggregates partially dissociate and the matrix softens at elevated temperatures, allowing for the effective rearrangement of magnetic particles by applying a magnetic field in the desired direction. Magnetoactive thermoplastic elastomers (MATEs) based on A-g-B bottlebrush graft copolymers with different amounts of aggregating side chains filled with different amounts of carbonyl iron microparticles were prepared. The in situ restructuring of magnetic particles in MATEs was shown to significantly alter their viscoelasticity and magnetic response. In particular, the induced anisotropy led to an order-of-magnitude enhancement of the magnetorheological properties of the composites.

Fabrication and Applications of Magnetic Polymer Composites for Soft Robotics

The emergence of magnetic polymer composites has had a transformative impact on the field of soft robotics. This overview will examine the various methods by which innovative materials can be synthesized and utilized. The advancement of soft robotic systems has been significantly enhanced by the utilization of magnetic polymer composites, which amalgamate the pliability of polymers with the reactivity of magnetic materials. This study extensively examines the production methodologies involved in dispersing magnetic particles within polymer matrices and controlling their spatial distribution. The objective is to gain insights into the strategies required to attain the desired mechanical and magnetic properties. Additionally, this study delves into the potential applications of these composites in the field of soft robotics, encompassing various devices such as soft actuators, grippers, and wearable gadgets. The study emphasizes the transformative capabilities of magnetic polymer composites, which offer a novel framework for the advancement of biocompatible, versatile soft robotic systems that utilize magnetic actuation.

Radiant Reinforcement: Enhancing Composite Polymer Magnet Materials Mechanical Properties with UVC Medical Disinfection

Magnetic polymer composites have recently attracted considerable interest, primarily because of their promising applications, especially in the biomedical industry. The aim of this study is to investigate the impact of ultraviolet C (UVC) irradiation as a disinfection method on the mechanical characteristics of composite polymer magnets. Tensile and compression tests were conducted following the standards set by ASTM D3039 and ASTM D3410, respectively. In addition, energy dispersive spectroscopy (EDS) was used to determine the effect of the disinfection method on the amount of carbon, oxygen, and iron within the surface of the composite polymer magnet material. The UVC's irradiation impact was statistically assessed by a t-test. The results of the tensile tests demonstrated a significant increase in the transition force, measuring 0.41 kN and 0.58 kN before and after UVC exposure, respectively. Similarly, the outcomes of the compression tests showed a notable increase in yield force, registering 4.9 kN and 6 kN before and after UVC treatment. This suggests that the composite magnetic material has gained a higher capacity to withstand compressive loads than tensile loads. Finally, the EDS analysis revealed the carbon mass percentage was 71.69% prior to UVC radiation exposure, with it increasing to 78.56%, following exposure. This suggests that the composite material exhibited improved hardness. These findings highlight that UVC irradiation has a beneficial impact on both the mechanical and chemical properties of the composite magnet material, which support its use as a disinfection method in clinical settings.

Adaptive Fuzzy Modal Matching of Capacitive Micromachined Gyro Electrostatic Controlling

A fuzzy PI controller was utilized to realize the modal matching between a driving and detecting model. A simulation model was built to study electrostatic decoupling controlling technology. The simulation results show that the modal matching can be gained by the fuzzy PI controller. The frequency difference between the driving mode and the detection mode is less than 1 Hz, and the offset of the input DC is smaller than 0.6 V. The optimal proportionality factor and integral coefficient are 1.5 and 20, respectively. The fuzzy PI controlling technology provides a good way for the parameter optimization to gain modal matching of micro gyro, via which the detecting accuracy and stability can be improved greatly.